All of lore.kernel.org
 help / color / mirror / Atom feed
From: Zhang Rui <rui.zhang@intel.com>
To: linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
	linux-acpi@vger.kernel.org, intel-gfx@lists.freedesktop.org
Cc: rjw@sisk.pl, lenb@kernel.org, Zhang Rui <rui.zhang@intel.com>
Subject: [RFC PATCH 3/3] i915: ignore lid open event when resuming
Date: Sun, 27 Jan 2013 23:21:00 +0800	[thread overview]
Message-ID: <1359300060-2967-3-git-send-email-rui.zhang@intel.com> (raw)
In-Reply-To: <1359300060-2967-1-git-send-email-rui.zhang@intel.com>

i915 driver needs to do modeset when
1. system resumes from sleep
2. lid is opened

In PM_SUSPEND_MEM state, all the GPEs are cleared when system resumes,
thus it is the i915_resume code does the modeset rather than intel_lid_notify().

In PM_SUSPEND_FREEZE state, system is still resposive to the lid events.
1. When we close the lid in Freeze state, intel_lid_notify() sets modeset_on_lid.
2. When we reopen the lid, intel_lid_notify() will do a modeset,
   before the system is resumed.

here is the error log,

[92146.548074] WARNING: at drivers/gpu/drm/i915/intel_display.c:1028 intel_wait_for_pipe_off+0x184/0x190 [i915]()
[92146.548076] Hardware name: VGN-Z540N
[92146.548078] pipe_off wait timed out
[92146.548167] Modules linked in: hid_generic usbhid hid snd_hda_codec_realtek snd_hda_intel snd_hda_codec parport_pc snd_hwdep ppdev snd_pcm_oss i915 snd_mixer_oss snd_pcm arc4 iwldvm snd_seq_dummy mac80211 snd_seq_oss snd_seq_midi fbcon tileblit font bitblit softcursor drm_kms_helper snd_rawmidi snd_seq_midi_event coretemp drm snd_seq kvm btusb bluetooth snd_timer iwlwifi pcmcia tpm_infineon i2c_algo_bit joydev snd_seq_device intel_agp cfg80211 snd intel_gtt yenta_socket pcmcia_rsrc sony_laptop agpgart microcode psmouse tpm_tis serio_raw mxm_wmi soundcore snd_page_alloc tpm acpi_cpufreq lpc_ich pcmcia_core tpm_bios mperf processor lp parport firewire_ohci firewire_core crc_itu_t sdhci_pci sdhci thermal e1000e
[92146.548173] Pid: 4304, comm: kworker/0:0 Tainted: G        W    3.8.0-rc3-s0i3-v3-test+ #9
[92146.548175] Call Trace:
[92146.548189]  [<c10378e2>] warn_slowpath_common+0x72/0xa0
[92146.548227]  [<f86398b4>] ? intel_wait_for_pipe_off+0x184/0x190 [i915]
[92146.548263]  [<f86398b4>] ? intel_wait_for_pipe_off+0x184/0x190 [i915]
[92146.548270]  [<c10379b3>] warn_slowpath_fmt+0x33/0x40
[92146.548307]  [<f86398b4>] intel_wait_for_pipe_off+0x184/0x190 [i915]
[92146.548344]  [<f86399c2>] intel_disable_pipe+0x102/0x190 [i915]
[92146.548380]  [<f8639ea4>] ? intel_disable_plane+0x64/0x80 [i915]
[92146.548417]  [<f8639f7c>] i9xx_crtc_disable+0xbc/0x150 [i915]
[92146.548456]  [<f863ebee>] intel_crtc_update_dpms+0x5e/0x90 [i915]
[92146.548493]  [<f86437cf>] intel_modeset_setup_hw_state+0x42f/0x8f0 [i915]
[92146.548535]  [<f8645b0b>] intel_lid_notify+0x9b/0xc0 [i915]
[92146.548543]  [<c15610d3>] notifier_call_chain+0x43/0x60
[92146.548550]  [<c105d1e1>] __blocking_notifier_call_chain+0x41/0x80
[92146.548556]  [<c105d23f>] blocking_notifier_call_chain+0x1f/0x30
[92146.548563]  [<c131a684>] acpi_lid_send_state+0x78/0xa4
[92146.548569]  [<c131aa9e>] acpi_button_notify+0x3b/0xf1
[92146.548577]  [<c12df56a>] ? acpi_os_execute+0x17/0x19
[92146.548582]  [<c12e591a>] ? acpi_ec_sync_query+0xa5/0xbc
[92146.548589]  [<c12e2b82>] acpi_device_notify+0x16/0x18
[92146.548595]  [<c12f4904>] acpi_ev_notify_dispatch+0x38/0x4f
[92146.548600]  [<c12df0e8>] acpi_os_execute_deferred+0x20/0x2b
[92146.548607]  [<c1051208>] process_one_work+0x128/0x3f0
[92146.548613]  [<c1564f73>] ? common_interrupt+0x33/0x38
[92146.548618]  [<c104f8c0>] ? wake_up_worker+0x30/0x30
[92146.548624]  [<c12df0c8>] ? acpi_os_wait_events_complete+0x1e/0x1e
[92146.548629]  [<c10524f9>] worker_thread+0x119/0x3b0
[92146.548634]  [<c10523e0>] ? manage_workers+0x240/0x240
[92146.548640]  [<c1056e84>] kthread+0x94/0xa0
[92146.548647]  [<c1060000>] ? ftrace_raw_output_sched_stat_runtime+0x70/0xf0
[92146.548652]  [<c15649b7>] ret_from_kernel_thread+0x1b/0x28
[92146.548658]  [<c1056df0>] ? kthread_create_on_node+0xc0/0xc0

so I'd like to use tristate for modeset_on_lid instead of bool.
-1: ingore all the lid events.
0:  do not do modeset when there is a lid-open event.
1:  do modeset when there is a lid-open event.
In this way, only device resume code will do modeset in a suspend/resume cycle.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
---
 drivers/gpu/drm/i915/i915_drv.c   |    4 ++--
 drivers/gpu/drm/i915/i915_drv.h   |    2 +-
 drivers/gpu/drm/i915/intel_lvds.c |    2 ++
 3 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 1172658..d7613cb 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -492,8 +492,8 @@ static int i915_drm_freeze(struct drm_device *dev)
 
 	intel_opregion_fini(dev);
 
-	/* Modeset on resume, not lid events */
-	dev_priv->modeset_on_lid = 0;
+	/* Modeset on resume, ignore lid events */
+	dev_priv->modeset_on_lid = -1;
 
 	console_lock();
 	intel_fbdev_set_suspend(dev, 1);
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index ed30595..3fec498 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -748,7 +748,7 @@ typedef struct drm_i915_private {
 	unsigned long quirks;
 
 	/* Register state */
-	bool modeset_on_lid;
+	int modeset_on_lid;	/* -1: invalid, 0: no modeset, 1: do modeset */
 
 	struct {
 		/** Bridge to intel-gtt-ko */
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 17aee74..4ddae6d 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -512,6 +512,8 @@ static int intel_lid_notify(struct notifier_block *nb, unsigned long val,
 	if (dev->switch_power_state != DRM_SWITCH_POWER_ON)
 		return NOTIFY_OK;
 
+	if (dev_priv->modeset_on_lid == -1)
+		return NOTIFY_OK;
 	/*
 	 * check and update the status of LVDS connector after receiving
 	 * the LID nofication event.
-- 
1.7.9.5


  parent reply	other threads:[~2013-01-27 15:21 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-01-27 15:20 [RFC PATCH 1/3] PM: Introduce suspend state PM_SUSPEND_FREEZE Zhang Rui
2013-01-27 15:20 ` Zhang Rui
2013-01-27 15:20 ` [RFC PATCH 2/3] ACPI: enable ACPI SCI during suspend Zhang Rui
2013-01-27 15:21 ` Zhang Rui [this message]
2013-01-27 15:45   ` [Intel-gfx] [RFC PATCH 3/3] i915: ignore lid open event when resuming Daniel Vetter
2013-01-27 22:21     ` Rafael J. Wysocki
2013-01-27 23:21       ` Daniel Vetter
2013-01-28  2:36     ` Zhang Rui
2013-01-28  8:31       ` Daniel Vetter
2013-01-28 10:06         ` Zhang Rui
2013-01-29 10:10           ` Daniel Vetter
2013-02-04  6:26             ` Zhang Rui
2013-01-29  2:05 ` [RFC PATCH 1/3] PM: Introduce suspend state PM_SUSPEND_FREEZE Andreas Mohr

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1359300060-2967-3-git-send-email-rui.zhang@intel.com \
    --to=rui.zhang@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=lenb@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=rjw@sisk.pl \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.