From: Rahul Sharma <rahul.sharma@samsung.com>
To: linux-samsung-soc@vger.kernel.org, devicetree-discuss@lists.ozlabs.org
Cc: dri-devel@lists.freedesktop.org, kgene.kim@samsung.com,
sw0312.kim@samsung.com, inki.dae@samsung.com,
s.nawrocki@samsung.com, joshi@samsung.com, r.sh.open@gmail.com
Subject: [PATCH] ARM: dts: moving dt binding documents for video devices to common place
Date: Wed, 06 Feb 2013 09:51:39 -0500 [thread overview]
Message-ID: <1360162299-8893-1-git-send-email-rahul.sharma@samsung.com> (raw)
Binding Documents for drm-devices are placed in
Documentation/devicetree/bindings/drm/*. But these devices are common
for v4l framework, hence moved to a common place at
Documentation/devicetree/bindings/video/. 'exynos_' prefix is added to
associate them with exynos soc series.
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
---
It is base on for-next branch of
git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
.../devicetree/bindings/drm/exynos/hdmi.txt | 22 ----------------------
.../devicetree/bindings/drm/exynos/hdmiddc.txt | 12 ------------
.../devicetree/bindings/drm/exynos/hdmiphy.txt | 12 ------------
.../devicetree/bindings/drm/exynos/mixer.txt | 15 ---------------
.../devicetree/bindings/video/exynos_hdmi.txt | 22 ++++++++++++++++++++++
.../devicetree/bindings/video/exynos_hdmiddc.txt | 12 ++++++++++++
.../devicetree/bindings/video/exynos_hdmiphy.txt | 12 ++++++++++++
.../devicetree/bindings/video/exynos_mixer.txt | 15 +++++++++++++++
8 files changed, 61 insertions(+), 61 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/drm/exynos/hdmi.txt
delete mode 100644 Documentation/devicetree/bindings/drm/exynos/hdmiddc.txt
delete mode 100644 Documentation/devicetree/bindings/drm/exynos/hdmiphy.txt
delete mode 100644 Documentation/devicetree/bindings/drm/exynos/mixer.txt
create mode 100644 Documentation/devicetree/bindings/video/exynos_hdmi.txt
create mode 100644 Documentation/devicetree/bindings/video/exynos_hdmiddc.txt
create mode 100644 Documentation/devicetree/bindings/video/exynos_hdmiphy.txt
create mode 100644 Documentation/devicetree/bindings/video/exynos_mixer.txt
diff --git a/Documentation/devicetree/bindings/drm/exynos/hdmi.txt b/Documentation/devicetree/bindings/drm/exynos/hdmi.txt
deleted file mode 100644
index 589edee..0000000
--- a/Documentation/devicetree/bindings/drm/exynos/hdmi.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Device-Tree bindings for drm hdmi driver
-
-Required properties:
-- compatible: value should be "samsung,exynos5-hdmi".
-- reg: physical base address of the hdmi and length of memory mapped
- region.
-- interrupts: interrupt number to the cpu.
-- hpd-gpio: following information about the hotplug gpio pin.
- a) phandle of the gpio controller node.
- b) pin number within the gpio controller.
- c) pin function mode.
- d) optional flags and pull up/down.
- e) drive strength.
-
-Example:
-
- hdmi {
- compatible = "samsung,exynos5-hdmi";
- reg = <0x14530000 0x100000>;
- interrupts = <0 95 0>;
- hpd-gpio = <&gpx3 7 0xf 1 3>;
- };
diff --git a/Documentation/devicetree/bindings/drm/exynos/hdmiddc.txt b/Documentation/devicetree/bindings/drm/exynos/hdmiddc.txt
deleted file mode 100644
index fa166d9..0000000
--- a/Documentation/devicetree/bindings/drm/exynos/hdmiddc.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-Device-Tree bindings for hdmiddc driver
-
-Required properties:
-- compatible: value should be "samsung,exynos5-hdmiddc".
-- reg: I2C address of the hdmiddc device.
-
-Example:
-
- hdmiddc {
- compatible = "samsung,exynos5-hdmiddc";
- reg = <0x50>;
- };
diff --git a/Documentation/devicetree/bindings/drm/exynos/hdmiphy.txt b/Documentation/devicetree/bindings/drm/exynos/hdmiphy.txt
deleted file mode 100644
index 858f4f9..0000000
--- a/Documentation/devicetree/bindings/drm/exynos/hdmiphy.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-Device-Tree bindings for hdmiphy driver
-
-Required properties:
-- compatible: value should be "samsung,exynos5-hdmiphy".
-- reg: I2C address of the hdmiphy device.
-
-Example:
-
- hdmiphy {
- compatible = "samsung,exynos5-hdmiphy";
- reg = <0x38>;
- };
diff --git a/Documentation/devicetree/bindings/drm/exynos/mixer.txt b/Documentation/devicetree/bindings/drm/exynos/mixer.txt
deleted file mode 100644
index 9b2ea03..0000000
--- a/Documentation/devicetree/bindings/drm/exynos/mixer.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-Device-Tree bindings for mixer driver
-
-Required properties:
-- compatible: value should be "samsung,exynos5-mixer".
-- reg: physical base address of the mixer and length of memory mapped
- region.
-- interrupts: interrupt number to the cpu.
-
-Example:
-
- mixer {
- compatible = "samsung,exynos5-mixer";
- reg = <0x14450000 0x10000>;
- interrupts = <0 94 0>;
- };
diff --git a/Documentation/devicetree/bindings/video/exynos_hdmi.txt b/Documentation/devicetree/bindings/video/exynos_hdmi.txt
new file mode 100644
index 0000000..589edee
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/exynos_hdmi.txt
@@ -0,0 +1,22 @@
+Device-Tree bindings for drm hdmi driver
+
+Required properties:
+- compatible: value should be "samsung,exynos5-hdmi".
+- reg: physical base address of the hdmi and length of memory mapped
+ region.
+- interrupts: interrupt number to the cpu.
+- hpd-gpio: following information about the hotplug gpio pin.
+ a) phandle of the gpio controller node.
+ b) pin number within the gpio controller.
+ c) pin function mode.
+ d) optional flags and pull up/down.
+ e) drive strength.
+
+Example:
+
+ hdmi {
+ compatible = "samsung,exynos5-hdmi";
+ reg = <0x14530000 0x100000>;
+ interrupts = <0 95 0>;
+ hpd-gpio = <&gpx3 7 0xf 1 3>;
+ };
diff --git a/Documentation/devicetree/bindings/video/exynos_hdmiddc.txt b/Documentation/devicetree/bindings/video/exynos_hdmiddc.txt
new file mode 100644
index 0000000..fa166d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/exynos_hdmiddc.txt
@@ -0,0 +1,12 @@
+Device-Tree bindings for hdmiddc driver
+
+Required properties:
+- compatible: value should be "samsung,exynos5-hdmiddc".
+- reg: I2C address of the hdmiddc device.
+
+Example:
+
+ hdmiddc {
+ compatible = "samsung,exynos5-hdmiddc";
+ reg = <0x50>;
+ };
diff --git a/Documentation/devicetree/bindings/video/exynos_hdmiphy.txt b/Documentation/devicetree/bindings/video/exynos_hdmiphy.txt
new file mode 100644
index 0000000..858f4f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/exynos_hdmiphy.txt
@@ -0,0 +1,12 @@
+Device-Tree bindings for hdmiphy driver
+
+Required properties:
+- compatible: value should be "samsung,exynos5-hdmiphy".
+- reg: I2C address of the hdmiphy device.
+
+Example:
+
+ hdmiphy {
+ compatible = "samsung,exynos5-hdmiphy";
+ reg = <0x38>;
+ };
diff --git a/Documentation/devicetree/bindings/video/exynos_mixer.txt b/Documentation/devicetree/bindings/video/exynos_mixer.txt
new file mode 100644
index 0000000..9b2ea03
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/exynos_mixer.txt
@@ -0,0 +1,15 @@
+Device-Tree bindings for mixer driver
+
+Required properties:
+- compatible: value should be "samsung,exynos5-mixer".
+- reg: physical base address of the mixer and length of memory mapped
+ region.
+- interrupts: interrupt number to the cpu.
+
+Example:
+
+ mixer {
+ compatible = "samsung,exynos5-mixer";
+ reg = <0x14450000 0x10000>;
+ interrupts = <0 94 0>;
+ };
--
1.8.0
next reply other threads:[~2013-02-06 14:51 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-06 14:51 Rahul Sharma [this message]
[not found] ` <1360162299-8893-1-git-send-email-rahul.sharma-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2013-03-04 3:51 ` [PATCH] ARM: dts: moving dt binding documents for video devices to common place Grant Likely
2013-02-06 14:57 Rahul Sharma
2013-02-06 14:50 ` Sylwester Nawrocki
2013-02-07 3:10 ` Rahul Sharma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1360162299-8893-1-git-send-email-rahul.sharma@samsung.com \
--to=rahul.sharma@samsung.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=inki.dae@samsung.com \
--cc=joshi@samsung.com \
--cc=kgene.kim@samsung.com \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=r.sh.open@gmail.com \
--cc=s.nawrocki@samsung.com \
--cc=sw0312.kim@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.