All of lore.kernel.org
 help / color / mirror / Atom feed
From: Paulo Zanoni <przanoni@gmail.com>
To: intel-gfx@lists.freedesktop.org
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Subject: [PATCH 3/7] drm/i915: clear the FPGA_DBG_RM_NOCLAIM bit at driver init
Date: Tue, 19 Feb 2013 16:13:35 -0300	[thread overview]
Message-ID: <1361301215-3792-1-git-send-email-przanoni@gmail.com> (raw)
In-Reply-To: <1361224828-3730-4-git-send-email-przanoni@gmail.com>

From: Paulo Zanoni <paulo.r.zanoni@intel.com>

Otherwise, if the BIOS did anything wrong, our first I915_{WRITE,READ}
will give us "unclaimed register"  messages.

V2: Even earlier.
V3: Move it to intel_early_sanitize_regs.

Bugzilla: http://bugs.freedesktop.org/show_bug.cgi?id=58897
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
---
 drivers/gpu/drm/i915/i915_dma.c |   18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 4fa6beb..e16099b 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1453,6 +1453,22 @@ static void i915_dump_device_info(struct drm_i915_private *dev_priv)
 }
 
 /**
+ * intel_early_sanitize_regs - clean up BIOS state
+ * @dev: DRM device
+ *
+ * This function must be called before we do any I915_READ or I915_WRITE. Its
+ * purpose is to clean up any state left by the BIOS that may affect us when
+ * reading and/or writing registers.
+ */
+static void intel_early_sanitize_regs(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	if (IS_HASWELL(dev))
+		I915_WRITE_NOTRACE(FPGA_DBG, FPGA_DBG_RM_NOCLAIM);
+}
+
+/**
  * i915_driver_load - setup chip and create an initial config
  * @dev: DRM device
  * @flags: startup flags
@@ -1542,6 +1558,8 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 		goto put_gmch;
 	}
 
+	intel_early_sanitize_regs(dev);
+
 	aperture_size = dev_priv->gtt.mappable_end;
 
 	dev_priv->gtt.mappable =
-- 
1.7.10.4

  parent reply	other threads:[~2013-02-19 19:13 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-02-18 22:00 [PATCH 0/8] Small refactorings v2 Paulo Zanoni
2013-02-18 22:00 ` [PATCH 1/8] drm/i915: create functions for the "unclaimed register" checks Paulo Zanoni
2013-02-18 22:00 ` [PATCH 2/8] drm/i915: use FPGA_DBG " Paulo Zanoni
2013-02-18 22:00 ` [PATCH 3/8] drm/i915: clear the FPGA_DBG_RM_NOCLAIM bit at driver init Paulo Zanoni
2013-02-19  9:32   ` Chris Wilson
2013-02-19 19:13   ` Paulo Zanoni [this message]
2013-02-19 19:45     ` [PATCH 3/7] " Daniel Vetter
2013-02-18 22:00 ` [PATCH 4/8] drm/i915: use HAS_DDI on intel_hdmi.c and intel_display.c Paulo Zanoni
2013-02-18 22:00 ` [PATCH 5/8] drm/i915: wait_event_timeout's timeout is in jiffies Paulo Zanoni
2013-03-03 17:36   ` Daniel Vetter
2013-02-18 22:00 ` [PATCH 6/8] drm/i915: add aux_ch_ctl_reg to struct intel_dp Paulo Zanoni
2013-02-18 22:00 ` [PATCH 7/8] drm/i915: rename sdvox_reg to hdmi_reg on HDMI context Paulo Zanoni
2013-02-19 11:47   ` Daniel Vetter
2013-02-18 22:00 ` [PATCH 8/8] drm/i915: clarify confusion between SDVO and HDMI registers Paulo Zanoni
2013-02-19 12:06   ` Daniel Vetter
2013-02-19 19:19     ` Paulo Zanoni
2013-03-04 22:28       ` Daniel Vetter
2013-02-19 19:21   ` [PATCH 9/8] drm/i915: unify the definitions of the HDMI/SDVO register Paulo Zanoni
2013-02-19 19:21     ` [PATCH 10/8] drm/i915: remove duplicated SDVO/HDMI bit definitions Paulo Zanoni
2013-02-19 19:21     ` [PATCH 11/8] drm/i915: rename some HDMI " Paulo Zanoni
  -- strict thread matches above, loose matches on Subject: below --
2013-01-25 20:57 [PATCH 0/7] Unclaimed register reporting V2 Paulo Zanoni
2013-01-25 20:57 ` [PATCH 3/7] drm/i915: clear the FPGA_DBG_RM_NOCLAIM bit at driver init Paulo Zanoni
2013-01-26  1:05   ` Ben Widawsky

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1361301215-3792-1-git-send-email-przanoni@gmail.com \
    --to=przanoni@gmail.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=paulo.r.zanoni@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.