From: andrew@lunn.ch (Andrew Lunn)
To: linux-arm-kernel@lists.infradead.org
Subject: [Patch v3 21/23] ARM: MVEBU: Simplifiy headers and make local
Date: Wed, 19 Feb 2014 15:12:52 +0100 [thread overview]
Message-ID: <1392819174-11634-22-git-send-email-andrew@lunn.ch> (raw)
In-Reply-To: <1392819174-11634-1-git-send-email-andrew@lunn.ch>
kirkwood is very nearly fully DT. Remove most of the address
definitions from the header files and make it a local header file.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Arnd Bergmann <arnd@arndb.de>
v2
Squash in the patch which removed unneeded includes.
---
arch/arm/mach-mvebu/include/mach/bridge-regs.h | 85 ---------------
arch/arm/mach-mvebu/include/mach/kirkwood.h | 142 -------------------------
arch/arm/mach-mvebu/kirkwood-pm.c | 2 +-
arch/arm/mach-mvebu/kirkwood.c | 9 +-
arch/arm/mach-mvebu/kirkwood.h | 22 ++++
5 files changed, 26 insertions(+), 234 deletions(-)
delete mode 100644 arch/arm/mach-mvebu/include/mach/bridge-regs.h
delete mode 100644 arch/arm/mach-mvebu/include/mach/kirkwood.h
create mode 100644 arch/arm/mach-mvebu/kirkwood.h
diff --git a/arch/arm/mach-mvebu/include/mach/bridge-regs.h b/arch/arm/mach-mvebu/include/mach/bridge-regs.h
deleted file mode 100644
index 6eb8fea1f76f..000000000000
--- a/arch/arm/mach-mvebu/include/mach/bridge-regs.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * arch/arm/mach-mvebu/include/mach/bridge-regs.h
- *
- * Mbus-L to Mbus Bridge Registers
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_BRIDGE_REGS_H
-#define __ASM_ARCH_BRIDGE_REGS_H
-
-#include <mach/kirkwood.h>
-
-#define CPU_CONFIG (BRIDGE_VIRT_BASE + 0x0100)
-#define CPU_CONFIG_PHYS (BRIDGE_PHYS_BASE + 0x0100)
-#define CPU_CONFIG_ERROR_PROP 0x00000004
-
-#define CPU_CONTROL (BRIDGE_VIRT_BASE + 0x0104)
-#define CPU_CONTROL_PHYS (BRIDGE_PHYS_BASE + 0x0104)
-#define CPU_RESET 0x00000002
-
-#define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108)
-#define SOFT_RESET_OUT_EN 0x00000004
-
-#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE + 0x010c)
-#define SOFT_RESET 0x00000001
-
-#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE + 0x0110)
-
-#define BRIDGE_INT_TIMER1_CLR (~0x0004)
-
-#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0200)
-#define IRQ_CAUSE_LOW_OFF 0x0000
-#define IRQ_MASK_LOW_OFF 0x0004
-#define IRQ_CAUSE_HIGH_OFF 0x0010
-#define IRQ_MASK_HIGH_OFF 0x0014
-
-#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0300)
-#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE + 0x0300)
-
-#define L2_CONFIG_REG (BRIDGE_VIRT_BASE + 0x0128)
-#define L2_WRITETHROUGH 0x00000010
-
-#define CLOCK_GATING_CTRL (BRIDGE_VIRT_BASE + 0x11c)
-#define CGC_BIT_GE0 (0)
-#define CGC_BIT_PEX0 (2)
-#define CGC_BIT_USB0 (3)
-#define CGC_BIT_SDIO (4)
-#define CGC_BIT_TSU (5)
-#define CGC_BIT_DUNIT (6)
-#define CGC_BIT_RUNIT (7)
-#define CGC_BIT_XOR0 (8)
-#define CGC_BIT_AUDIO (9)
-#define CGC_BIT_SATA0 (14)
-#define CGC_BIT_SATA1 (15)
-#define CGC_BIT_XOR1 (16)
-#define CGC_BIT_CRYPTO (17)
-#define CGC_BIT_PEX1 (18)
-#define CGC_BIT_GE1 (19)
-#define CGC_BIT_TDM (20)
-#define CGC_GE0 (1 << 0)
-#define CGC_PEX0 (1 << 2)
-#define CGC_USB0 (1 << 3)
-#define CGC_SDIO (1 << 4)
-#define CGC_TSU (1 << 5)
-#define CGC_DUNIT (1 << 6)
-#define CGC_RUNIT (1 << 7)
-#define CGC_XOR0 (1 << 8)
-#define CGC_AUDIO (1 << 9)
-#define CGC_POWERSAVE (1 << 11)
-#define CGC_SATA0 (1 << 14)
-#define CGC_SATA1 (1 << 15)
-#define CGC_XOR1 (1 << 16)
-#define CGC_CRYPTO (1 << 17)
-#define CGC_PEX1 (1 << 18)
-#define CGC_GE1 (1 << 19)
-#define CGC_TDM (1 << 20)
-#define CGC_RESERVED (0x6 << 21)
-
-#define MEMORY_PM_CTRL (BRIDGE_VIRT_BASE + 0x118)
-#define MEMORY_PM_CTRL_PHYS (BRIDGE_PHYS_BASE + 0x118)
-
-#endif
diff --git a/arch/arm/mach-mvebu/include/mach/kirkwood.h b/arch/arm/mach-mvebu/include/mach/kirkwood.h
deleted file mode 100644
index 9d966dc78d67..000000000000
--- a/arch/arm/mach-mvebu/include/mach/kirkwood.h
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * arch/arm/mach-mvebu/include/mach/kirkwood.h
- *
- * Generic definitions for Marvell Kirkwood SoC flavors:
- * 88F6180, 88F6192 and 88F6281.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_KIRKWOOD_H
-#define __ASM_ARCH_KIRKWOOD_H
-
-/*
- * Marvell Kirkwood address maps.
- *
- * phys
- * e0000000 PCIe #0 Memory space
- * e8000000 PCIe #1 Memory space
- * f1000000 on-chip peripheral registers
- * f2000000 PCIe #0 I/O space
- * f3000000 PCIe #1 I/O space
- * f4000000 NAND controller address window
- * f5000000 Security Accelerator SRAM
- *
- * virt phys size
- * fed00000 f1000000 1M on-chip peripheral registers
- * fee00000 f2000000 1M PCIe #0 I/O space
- * fef00000 f3000000 1M PCIe #1 I/O space
- */
-
-#define KIRKWOOD_SRAM_PHYS_BASE 0xf5000000
-#define KIRKWOOD_SRAM_SIZE SZ_2K
-
-#define KIRKWOOD_NAND_MEM_PHYS_BASE 0xf4000000
-#define KIRKWOOD_NAND_MEM_SIZE SZ_1K
-
-#define KIRKWOOD_PCIE1_IO_PHYS_BASE 0xf3000000
-#define KIRKWOOD_PCIE1_IO_BUS_BASE 0x00010000
-#define KIRKWOOD_PCIE1_IO_SIZE SZ_64K
-
-#define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000
-#define KIRKWOOD_PCIE_IO_BUS_BASE 0x00000000
-#define KIRKWOOD_PCIE_IO_SIZE SZ_64K
-
-#define KIRKWOOD_REGS_PHYS_BASE 0xf1000000
-#define KIRKWOOD_REGS_VIRT_BASE IOMEM(0xfed00000)
-#define KIRKWOOD_REGS_SIZE SZ_1M
-
-#define KIRKWOOD_PCIE_MEM_PHYS_BASE 0xe0000000
-#define KIRKWOOD_PCIE_MEM_BUS_BASE 0xe0000000
-#define KIRKWOOD_PCIE_MEM_SIZE SZ_128M
-
-#define KIRKWOOD_PCIE1_MEM_PHYS_BASE 0xe8000000
-#define KIRKWOOD_PCIE1_MEM_BUS_BASE 0xe8000000
-#define KIRKWOOD_PCIE1_MEM_SIZE SZ_128M
-
-/*
- * Register Map
- */
-#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x00000)
-#define DDR_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x00000)
-#define DDR_WINDOW_CPU_BASE (DDR_PHYS_BASE + 0x1500)
-#define DDR_WINDOW_CPU_SZ (0x20)
-#define DDR_OPERATION_BASE (DDR_PHYS_BASE + 0x1418)
-
-#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x10000)
-#define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x10000)
-#define SAMPLE_AT_RESET (DEV_BUS_VIRT_BASE + 0x0030)
-#define DEVICE_ID (DEV_BUS_VIRT_BASE + 0x0034)
-#define GPIO_LOW_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0100)
-#define GPIO_HIGH_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0140)
-#define RTC_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x0300)
-#define SPI_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x0600)
-#define I2C_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x1000)
-#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2000)
-#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2000)
-#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2100)
-#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2100)
-
-#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x20000)
-#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x20000)
-#define BRIDGE_WINS_BASE (BRIDGE_PHYS_BASE)
-#define BRIDGE_WINS_SZ (0x80)
-
-#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x30000)
-
-#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x40000)
-#define PCIE_LINK_CTRL (PCIE_VIRT_BASE + 0x70)
-#define PCIE_STATUS (PCIE_VIRT_BASE + 0x1a04)
-#define PCIE1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x44000)
-#define PCIE1_LINK_CTRL (PCIE1_VIRT_BASE + 0x70)
-#define PCIE1_STATUS (PCIE1_VIRT_BASE + 0x1a04)
-
-#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x50000)
-
-#define XOR0_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60800)
-#define XOR0_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60800)
-#define XOR1_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60900)
-#define XOR1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60900)
-#define XOR0_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60A00)
-#define XOR0_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60A00)
-#define XOR1_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60B00)
-#define XOR1_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60B00)
-
-#define GE00_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x70000)
-#define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x74000)
-
-#define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x80000)
-#define SATA_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x80000)
-#define SATA0_IF_CTRL (SATA_VIRT_BASE + 0x2050)
-#define SATA0_PHY_MODE_2 (SATA_VIRT_BASE + 0x2330)
-#define SATA1_IF_CTRL (SATA_VIRT_BASE + 0x4050)
-#define SATA1_PHY_MODE_2 (SATA_VIRT_BASE + 0x4330)
-
-#define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x90000)
-
-#define AUDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0xA0000)
-#define AUDIO_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0xA0000)
-
-/*
- * Supported devices and revisions.
- */
-#define MV88F6281_DEV_ID 0x6281
-#define MV88F6281_REV_Z0 0
-#define MV88F6281_REV_A0 2
-#define MV88F6281_REV_A1 3
-
-#define MV88F6192_DEV_ID 0x6192
-#define MV88F6192_REV_Z0 0
-#define MV88F6192_REV_A0 2
-#define MV88F6192_REV_A1 3
-
-#define MV88F6180_DEV_ID 0x6180
-#define MV88F6180_REV_A0 2
-#define MV88F6180_REV_A1 3
-
-#define MV88F6282_DEV_ID 0x6282
-#define MV88F6282_REV_A0 0
-#define MV88F6282_REV_A1 1
-#endif
diff --git a/arch/arm/mach-mvebu/kirkwood-pm.c b/arch/arm/mach-mvebu/kirkwood-pm.c
index b8c8365b84d8..cbb816f2120c 100644
--- a/arch/arm/mach-mvebu/kirkwood-pm.c
+++ b/arch/arm/mach-mvebu/kirkwood-pm.c
@@ -17,7 +17,7 @@
#include <linux/kernel.h>
#include <linux/suspend.h>
#include <linux/io.h>
-#include <mach/bridge-regs.h>
+#include "kirkwood.h"
static void __iomem *ddr_operation_base;
static void __iomem *memory_pm_ctrl;
diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c
index 4c7bbec11b1a..8a38b10532e5 100644
--- a/arch/arm/mach-mvebu/kirkwood.c
+++ b/arch/arm/mach-mvebu/kirkwood.c
@@ -13,19 +13,16 @@
#include <linux/clk.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/mbus.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_net.h>
#include <linux/of_platform.h>
-#include <linux/dma-mapping.h>
-#include <linux/irqchip.h>
-#include <linux/kexec.h>
+#include <linux/slab.h>
#include <asm/hardware/cache-feroceon-l2.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/bridge-regs.h>
-#include <plat/common.h>
-#include <plat/pcie.h>
+#include "kirkwood.h"
#include "kirkwood-pm.h"
#include "common.h"
diff --git a/arch/arm/mach-mvebu/kirkwood.h b/arch/arm/mach-mvebu/kirkwood.h
new file mode 100644
index 000000000000..89f3d1f51643
--- /dev/null
+++ b/arch/arm/mach-mvebu/kirkwood.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-mvebu/kirkwood.h
+ *
+ * Generic definitions for Marvell Kirkwood SoC flavors:
+ * 88F6180, 88F6192 and 88F6281.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define KIRKWOOD_REGS_PHYS_BASE 0xf1000000
+#define DDR_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x00000)
+#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x20000)
+
+#define DDR_OPERATION_BASE (DDR_PHYS_BASE + 0x1418)
+
+#define CPU_CONFIG_PHYS (BRIDGE_PHYS_BASE + 0x0100)
+#define CPU_CONFIG_ERROR_PROP 0x00000004
+
+#define CPU_CONTROL_PHYS (BRIDGE_PHYS_BASE + 0x0104)
+#define MEMORY_PM_CTRL_PHYS (BRIDGE_PHYS_BASE + 0x0118)
--
1.8.5.3
next prev parent reply other threads:[~2014-02-19 14:12 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-19 14:12 [Patch v3 00/23] Move DT kirkwood into mach-mvebu Andrew Lunn
2014-02-19 14:12 ` [Patch v3 01/23] ARM: Kirkwood: Give pm.c its own header file Andrew Lunn
2014-02-19 14:12 ` [Patch v3 02/23] irqchip: Orion: Fix getting generic chip pointer Andrew Lunn
2014-02-19 14:12 ` [Patch v3 03/23] ARM: Kirkwood: Convert mv88f6281gtw_ge switch setup to DT Andrew Lunn
2014-02-19 14:12 ` [Patch v3 04/23] ARM: Kirkwood: Drop printing the SoC type and revision Andrew Lunn
2014-02-19 14:12 ` [Patch v3 05/23] ARM: Kirkwood: Seperate board-dt from common and pcie code Andrew Lunn
2014-02-19 14:12 ` [Patch v3 06/23] ARM: Kirkwood: ioremap the cpu_config register before using it Andrew Lunn
2014-02-19 14:12 ` [Patch v3 07/23] ARM: Kirkwood: ioremap memory control register Andrew Lunn
2014-02-19 14:12 ` [Patch v3 08/23] ARM: MVEBU: Add ARCH_MULTI_V7 to SoCs Andrew Lunn
2014-02-19 14:12 ` [Patch v3 09/23] ARM: Orion: Move cache-feroceon-l2.h out of plat-orion Andrew Lunn
[not found] ` <1392819174-11634-1-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org>
2014-02-19 14:12 ` [Patch v3 10/23] ARM: MM: Add DT binding for Feroceon L2 cache Andrew Lunn
2014-02-19 14:12 ` Andrew Lunn
[not found] ` <1392819174-11634-11-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org>
2014-02-19 18:17 ` Jason Cooper
2014-02-19 18:17 ` Jason Cooper
2014-02-19 14:12 ` [Patch v3 11/23] ARM: Kirkwood: Instantiate L2 cache from DT Andrew Lunn
2014-02-19 14:12 ` [Patch v3 12/23] ARM: Fix default CPU selection for ARCH_MULTI_V5 Andrew Lunn
2014-02-19 14:12 ` [Patch v3 13/23] ARM: Fix MULTI_TLB for feroceon Andrew Lunn
2014-02-19 14:12 ` [Patch v3 14/23] ARM: MM Enable building Feroceon L2 cache controller with ARCH_MVEBU Andrew Lunn
2014-02-19 14:12 ` [Patch v3 15/23] ARM: Move kirkwood DT boards into mach-mvebu Andrew Lunn
2014-02-19 14:12 ` [Patch v3 16/23] ARM: MVEBU: Let kirkwood use the system controller for restart Andrew Lunn
2014-02-19 14:12 ` [Patch v3 17/23] ARM: MVEBU: Instantiate system controller in kirkwood.dtsi Andrew Lunn
2014-02-19 14:12 ` [Patch v3 18/23] drivers: Enable building of Kirkwood drivers for mach-mvebu Andrew Lunn
2014-02-20 4:00 ` Mark Brown
2014-02-20 5:26 ` Kishon Vijay Abraham I
2014-02-20 8:55 ` Daniel Lezcano
2014-02-19 14:12 ` [Patch v3 19/23] ARM: MVEBU: Enable mvebu-soc-id on Kirkwood Andrew Lunn
2014-02-19 14:12 ` [Patch v3 20/23] ARM: config: Add a multi_v5_defconfig Andrew Lunn
2014-02-19 14:19 ` Alexander Shiyan
2014-02-19 14:24 ` Andrew Lunn
2014-02-19 14:54 ` Arnd Bergmann
2014-02-19 15:08 ` Alexander Shiyan
2014-02-19 15:54 ` Arnd Bergmann
2014-02-19 15:59 ` Alexander Shiyan
2014-02-19 16:42 ` Andrew Lunn
2014-02-19 14:12 ` Andrew Lunn [this message]
2014-02-19 18:20 ` [Patch v3 21/23] ARM: MVEBU: Simplifiy headers and make local Jason Cooper
2014-02-19 14:12 ` [Patch v3 22/23] ARM: config: Add mvebu_v5_defconfig Andrew Lunn
2014-02-19 14:12 ` [Patch v3 23/23] ARM: Kirkwood: Remove DT support Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1392819174-11634-22-git-send-email-andrew@lunn.ch \
--to=andrew@lunn.ch \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.