All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nick Dyer <nick.dyer@itdev.co.uk>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Yufeng Shen <miletus@google.com>,
	Daniel Kurtz <djkurtz@chromium.org>,
	Henrik Rydberg <rydberg@euromail.se>,
	Joonyoung Shim <jy0922.shim@samsung.com>,
	Alan Bowens <Alan.Bowens@atmel.com>,
	linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
	Peter Meerwald <pmeerw@pmeerw.net>,
	Benson Leung <bleung@chromium.org>,
	Olof Johansson <olofj@chromium.org>,
	Nick Dyer <nick.dyer@itdev.co.uk>
Subject: [PATCH 13/22] Input: atmel_mxt_ts - add additional bootloader addresses
Date: Mon, 17 Mar 2014 17:26:46 +0000	[thread overview]
Message-ID: <1395077215-10922-14-git-send-email-nick.dyer@itdev.co.uk> (raw)
In-Reply-To: <1395077215-10922-1-git-send-email-nick.dyer@itdev.co.uk>

Move bootloaders reads/writes into separate functions. Instead of switching
client->addr, define new field bootloader_addr in mxt_data. Implement
lookup calculation for bootloader addresses.

Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Benson Leung <bleung@chromium.org>
Acked-by: Yufeng Shen <miletus@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/touchscreen/atmel_mxt_ts.c | 138 +++++++++++++++++++++----------
 1 file changed, 93 insertions(+), 45 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index e3bf5b4..09f8b18 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -29,12 +29,6 @@
 #define MXT_VER_21		21
 #define MXT_VER_22		22
 
-/* Slave addresses */
-#define MXT_APP_LOW		0x4a
-#define MXT_APP_HIGH		0x4b
-#define MXT_BOOT_LOW		0x24
-#define MXT_BOOT_HIGH		0x25
-
 /* Firmware files */
 #define MXT_FW_NAME		"maxtouch.fw"
 #define MXT_CFG_NAME		"maxtouch.cfg"
@@ -267,6 +261,7 @@ struct mxt_data {
 	u16 mem_size;
 	u32 config_crc;
 	u32 info_crc;
+	u8 bootloader_addr;
 
 	/* Cached parameters from object table */
 	u8 T6_reportid;
@@ -354,9 +349,82 @@ static int mxt_wait_for_completion(struct mxt_data *data,
 	return 0;
 }
 
+static int mxt_bootloader_read(struct mxt_data *data,
+			       u8 *val, unsigned int count)
+{
+	int ret;
+	struct i2c_msg msg;
+
+	msg.addr = data->bootloader_addr;
+	msg.flags = data->client->flags & I2C_M_TEN;
+	msg.flags |= I2C_M_RD;
+	msg.len = count;
+	msg.buf = val;
+
+	ret = i2c_transfer(data->client->adapter, &msg, 1);
+
+	if (ret == 1) {
+		ret = 0;
+	} else {
+		ret = ret < 0 ? ret : -EIO;
+		dev_err(&data->client->dev, "%s: i2c recv failed (%d)\n",
+			__func__, ret);
+	}
+
+	return ret;
+}
+
+static int mxt_bootloader_write(struct mxt_data *data,
+				const u8 * const val, unsigned int count)
+{
+	int ret;
+	struct i2c_msg msg;
+
+	msg.addr = data->bootloader_addr;
+	msg.flags = data->client->flags & I2C_M_TEN;
+	msg.len = count;
+	msg.buf = (u8 *)val;
+
+	ret = i2c_transfer(data->client->adapter, &msg, 1);
+	if (ret == 1) {
+		ret = 0;
+	} else {
+		ret = ret < 0 ? ret : -EIO;
+		dev_err(&data->client->dev, "%s: i2c send failed (%d)\n",
+			__func__, ret);
+	}
+
+	return ret;
+}
+
+static int mxt_lookup_bootloader_address(struct mxt_data *data)
+{
+	u8 appmode = data->client->addr;
+	u8 bootloader;
+
+	switch (appmode) {
+	case 0x4a:
+	case 0x4b:
+	case 0x4c:
+	case 0x4d:
+	case 0x5a:
+	case 0x5b:
+		bootloader = appmode - 0x26;
+		break;
+	default:
+		dev_err(&data->client->dev,
+			"Appmode i2c address 0x%02x not found\n",
+			appmode);
+		return -EINVAL;
+	}
+
+	data->bootloader_addr = bootloader;
+	return 0;
+}
+
 static int mxt_check_bootloader(struct mxt_data *data, unsigned int state)
 {
-	struct i2c_client *client = data->client;
+	struct device *dev = &data->client->dev;
 	u8 val;
 	int ret;
 
@@ -377,15 +445,14 @@ recheck:
 			 * by writing length 0x000 to device (iff we are in
 			 * WAITING_FRAME_DATA state).
 			 */
-			dev_err(&client->dev, "Update wait error %d\n", ret);
+			dev_err(dev, "Update wait error %d\n", ret);
 			return ret;
 		}
 	}
 
-	if (i2c_master_recv(client, &val, 1) != 1) {
-		dev_err(&client->dev, "%s: i2c recv failed\n", __func__);
-		return -EIO;
-	}
+	ret = mxt_bootloader_read(data, &val, 1);
+	if (ret)
+		return ret;
 
 	switch (state) {
 	case MXT_WAITING_BOOTLOAD_CMD:
@@ -401,7 +468,7 @@ recheck:
 	}
 
 	if (val != state) {
-		dev_err(&client->dev, "Invalid bootloader state %02X != %02X\n",
+		dev_err(dev, "Invalid bootloader state %02X != %02X\n",
 			val, state);
 		return -EINVAL;
 	}
@@ -409,28 +476,17 @@ recheck:
 	return 0;
 }
 
-static int mxt_unlock_bootloader(struct i2c_client *client)
+static int mxt_unlock_bootloader(struct mxt_data *data)
 {
+	int ret;
 	u8 buf[2];
 
 	buf[0] = MXT_UNLOCK_CMD_LSB;
 	buf[1] = MXT_UNLOCK_CMD_MSB;
 
-	if (i2c_master_send(client, buf, 2) != 2) {
-		dev_err(&client->dev, "%s: i2c send failed\n", __func__);
-		return -EIO;
-	}
-
-	return 0;
-}
-
-static int mxt_fw_write(struct i2c_client *client,
-			     const u8 *data, unsigned int frame_size)
-{
-	if (i2c_master_send(client, data, frame_size) != frame_size) {
-		dev_err(&client->dev, "%s: i2c send failed\n", __func__);
-		return -EIO;
-	}
+	ret = mxt_bootloader_write(data, buf, 2);
+	if (ret)
+		return ret;
 
 	return 0;
 }
@@ -1342,7 +1398,6 @@ done:
 static int mxt_load_fw(struct device *dev, const char *fn)
 {
 	struct mxt_data *data = dev_get_drvdata(dev);
-	struct i2c_client *client = data->client;
 	const struct firmware *fw = NULL;
 	unsigned int frame_size;
 	unsigned int pos = 0;
@@ -1354,6 +1409,10 @@ static int mxt_load_fw(struct device *dev, const char *fn)
 		return ret;
 	}
 
+	ret = mxt_lookup_bootloader_address(data);
+	if (ret)
+		goto release_firmware;
+
 	/* Change to the bootloader mode */
 	data->in_bootloader = true;
 
@@ -1363,12 +1422,6 @@ static int mxt_load_fw(struct device *dev, const char *fn)
 
 	msleep(MXT_RESET_TIME);
 
-	/* Change to slave address of bootloader */
-	if (client->addr == MXT_APP_LOW)
-		client->addr = MXT_BOOT_LOW;
-	else
-		client->addr = MXT_BOOT_HIGH;
-
 	reinit_completion(&data->bl_completion);
 
 	ret = mxt_check_bootloader(data, MXT_WAITING_BOOTLOAD_CMD);
@@ -1376,7 +1429,7 @@ static int mxt_load_fw(struct device *dev, const char *fn)
 		goto disable_irq;
 
 	/* Unlock bootloader */
-	mxt_unlock_bootloader(client);
+	mxt_unlock_bootloader(data);
 
 	while (pos < fw->size) {
 		ret = mxt_check_bootloader(data, MXT_WAITING_FRAME_DATA);
@@ -1391,7 +1444,9 @@ static int mxt_load_fw(struct device *dev, const char *fn)
 		frame_size += 2;
 
 		/* Write one frame to device */
-		mxt_fw_write(client, fw->data + pos, frame_size);
+		ret = mxt_bootloader_write(data, fw->data + pos, frame_size);
+		if (ret)
+			goto disable_irq;
 
 		ret = mxt_check_bootloader(data, MXT_FRAME_CRC_PASS);
 		if (ret)
@@ -1421,13 +1476,6 @@ disable_irq:
 	disable_irq(data->irq);
 release_firmware:
 	release_firmware(fw);
-
-	/* Change to slave address of application */
-	if (client->addr == MXT_BOOT_LOW)
-		client->addr = MXT_APP_LOW;
-	else
-		client->addr = MXT_APP_HIGH;
-
 	return ret;
 }
 
-- 
1.8.3.2


  parent reply	other threads:[~2014-03-17 17:38 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-03-17 17:26 [PATCH 00/22] atmel_mxt_ts patches, already signed-off Nick Dyer
2014-03-17 17:26 ` [PATCH 01/22] Input: atmel_mxt_ts - remove unnecessary platform data Nick Dyer
2014-03-17 17:26 ` [PATCH 02/22] Input: atmel_mxt_ts - improve T19 GPIO keys handling Nick Dyer
2014-03-17 17:26 ` [PATCH 03/22] Input: atmel_mxt_ts - return IRQ_NONE when interrupt handler fails Nick Dyer
2014-03-17 17:26 ` [PATCH 04/22] Input: atmel_mxt_ts - define helper functions for size and instances Nick Dyer
2014-03-17 17:26 ` [PATCH 05/22] Input: atmel_mxt_ts - select FW_LOADER for firmware code Nick Dyer
2014-03-17 17:26 ` [PATCH 06/22] Input: atmel_mxt_ts - wait for CHG assert in mxt_check_bootloader Nick Dyer
2014-03-17 17:26 ` [PATCH 07/22] Input: atmel_mxt_ts - wait for CHG after bootloader resets Nick Dyer
2014-03-17 17:26 ` [PATCH 08/22] Input: atmel_mxt_ts - make wait-after-reset period compatible with all chips Nick Dyer
2014-03-17 17:26 ` [PATCH 09/22] Input: atmel_mxt_ts - improve error reporting and debug Nick Dyer
2014-03-17 17:26 ` [PATCH 10/22] Input: atmel_mxt_ts - implement CRC check for configuration data Nick Dyer
2014-03-17 17:26 ` [PATCH 11/22] Input: atmel_mxt_ts - download device config using firmware loader Nick Dyer
2014-03-17 17:26 ` [PATCH 12/22] Input: atmel_mxt_ts - calculate and check CRC in config file Nick Dyer
2014-03-17 17:26 ` Nick Dyer [this message]
2014-03-17 17:26 ` [PATCH 14/22] Input: atmel_mxt_ts - read and report bootloader version Nick Dyer
2014-03-17 17:26 ` [PATCH 15/22] Input: atmel_mxt_ts - implement bootloader frame retries Nick Dyer
2014-03-17 17:26 ` [PATCH 16/22] Input: atmel_mxt_ts - improve bootloader progress output Nick Dyer
2014-03-17 17:26 ` [PATCH 17/22] Input: atmel_mxt_ts - add check for incorrect firmware file format Nick Dyer
2014-03-17 17:26 ` [PATCH 18/22] Input: atmel_mxt_ts - read screen config from chip Nick Dyer
2014-03-17 17:26 ` [PATCH 19/22] Input: atmel_mxt_ts - use deep sleep mode when stopped Nick Dyer
2014-03-17 17:26 ` [PATCH 20/22] Input: atmel_mxt_ts - rename pressure to amplitude to match spec Nick Dyer
2014-03-17 17:26 ` [PATCH 21/22] Input: atmel_mxt_ts - rename touchscreen defines to include T9 Nick Dyer
2014-03-17 17:26 ` [PATCH 22/22] Input: atmel_mxt_ts - handle multiple input reports in one message Nick Dyer
2014-04-03 10:41 ` [PATCH 00/22] atmel_mxt_ts patches, already signed-off Nick Dyer
2014-05-19  6:37   ` Dmitry Torokhov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1395077215-10922-14-git-send-email-nick.dyer@itdev.co.uk \
    --to=nick.dyer@itdev.co.uk \
    --cc=Alan.Bowens@atmel.com \
    --cc=bleung@chromium.org \
    --cc=djkurtz@chromium.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=jy0922.shim@samsung.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=miletus@google.com \
    --cc=olofj@chromium.org \
    --cc=pmeerw@pmeerw.net \
    --cc=rydberg@euromail.se \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.