All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Ivan T. Ivanov" <iivanov@mm-sol.com>
To: Felipe Balbi <balbi@ti.com>
Cc: "Ivan T. Ivanov" <iivanov@mm-sol.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-msm@vger.kernel.org
Subject: [PATCH v6 08/19] usb: phy: msm: Remove unused pclk_src_name
Date: Tue, 22 Apr 2014 12:20:27 +0300	[thread overview]
Message-ID: <1398158438-21579-9-git-send-email-iivanov@mm-sol.com> (raw)
In-Reply-To: <1398158438-21579-1-git-send-email-iivanov@mm-sol.com>

From: "Ivan T. Ivanov" <iivanov@mm-sol.com>

There are no references to 'pclk_src_name' in plaform code,
so it is unused.

Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
---
 drivers/usb/phy/phy-msm-usb.c | 26 +-------------------------
 include/linux/usb/msm_hsusb.h |  5 -----
 2 files changed, 1 insertion(+), 30 deletions(-)

diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index b87f33a..9b0f683 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -464,9 +464,6 @@ static int msm_otg_suspend(struct msm_otg *motg)
 	if (!IS_ERR(motg->core_clk))
 		clk_disable_unprepare(motg->core_clk);

-	if (!IS_ERR(motg->pclk_src))
-		clk_disable_unprepare(motg->pclk_src);
-
 	if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
 			motg->pdata->otg_control == OTG_PMIC_CONTROL) {
 		msm_hsusb_ldo_set_mode(motg, 0);
@@ -496,9 +493,6 @@ static int msm_otg_resume(struct msm_otg *motg)
 	if (!atomic_read(&motg->in_lpm))
 		return 0;

-	if (!IS_ERR(motg->pclk_src))
-		clk_prepare_enable(motg->pclk_src);
-
 	clk_prepare_enable(motg->pclk);
 	clk_prepare_enable(motg->clk);
 	if (!IS_ERR(motg->core_clk))
@@ -1395,17 +1389,8 @@ static int msm_otg_probe(struct platform_device *pdev)
 	 * If USB Core is running its protocol engine based on CORE CLK,
 	 * CORE CLK  must be running at >55Mhz for correct HSUSB
 	 * operation and USB core cannot tolerate frequency changes on
-	 * CORE CLK. For such USB cores, vote for maximum clk frequency
-	 * on pclk source
+	 * CORE CLK.
 	 */
-	 motg->pclk_src = ERR_PTR(-ENOENT);
-	 if (motg->pdata->pclk_src_name) {
-		motg->pclk_src = devm_clk_get(&pdev->dev,
-					motg->pdata->pclk_src_name);
-		if (IS_ERR(motg->pclk_src))
-			return PTR_ERR(motg->pclk_src);
-	}
-
 	motg->pclk = devm_clk_get(&pdev->dev, "usb_hs_pclk");
 	if (IS_ERR(motg->pclk)) {
 		dev_err(&pdev->dev, "failed to get usb_hs_pclk\n");
@@ -1451,10 +1436,6 @@ static int msm_otg_probe(struct platform_device *pdev)
 	}

 	clk_set_rate(motg->clk, 60000000);
-	if (!IS_ERR(motg->pclk_src)) {
-		clk_set_rate(motg->pclk_src, INT_MAX);
-		clk_prepare_enable(motg->pclk_src);
-	}

 	clk_prepare_enable(motg->clk);
 	clk_prepare_enable(motg->pclk);
@@ -1530,8 +1511,6 @@ disable_clks:
 	clk_disable_unprepare(motg->clk);
 	if (!IS_ERR(motg->core_clk))
 		clk_disable_unprepare(motg->core_clk);
-	if (!IS_ERR(motg->pclk_src))
-		clk_disable_unprepare(motg->pclk_src);
 	return ret;
 }

@@ -1576,9 +1555,6 @@ static int msm_otg_remove(struct platform_device *pdev)
 	clk_disable_unprepare(motg->clk);
 	if (!IS_ERR(motg->core_clk))
 		clk_disable_unprepare(motg->core_clk);
-	if (!IS_ERR(motg->pclk_src))
-		clk_disable_unprepare(motg->pclk_src);
-
 	msm_hsusb_ldo_init(motg, 0);

 	pm_runtime_set_suspended(&pdev->dev);
diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h
index 72c5830..262ed80 100644
--- a/include/linux/usb/msm_hsusb.h
+++ b/include/linux/usb/msm_hsusb.h
@@ -106,8 +106,6 @@ enum usb_chg_type {
  * @power_budget: VBUS power budget in mA (0 will be treated as 500mA).
  * @mode: Supported mode (OTG/peripheral/host).
  * @otg_control: OTG switch controlled by user/Id pin
- * @pclk_src_name: pclk is derived from ebi1_usb_clk in case of 7x27 and 8k
- *              dfab_usb_hs_clk in case of 8660 and 8960.
  */
 struct msm_otg_platform_data {
 	int *phy_init_seq;
@@ -117,7 +115,6 @@ struct msm_otg_platform_data {
 	enum otg_control_type otg_control;
 	enum msm_usb_phy_type phy_type;
 	void (*setup_gpio)(enum usb_otg_state state);
-	char *pclk_src_name;
 	int (*link_clk_reset)(struct clk *link_clk, bool assert);
 	int (*phy_clk_reset)(struct clk *phy_clk);
 };
@@ -129,7 +126,6 @@ struct msm_otg_platform_data {
  * @irq: IRQ number assigned for HSUSB controller.
  * @clk: clock struct of usb_hs_clk.
  * @pclk: clock struct of usb_hs_pclk.
- * @pclk_src: pclk source for voting.
  * @phy_reset_clk: clock struct of usb_phy_clk.
  * @core_clk: clock struct of usb_hs_core_clk.
  * @regs: ioremapped register base address.
@@ -150,7 +146,6 @@ struct msm_otg {
 	int irq;
 	struct clk *clk;
 	struct clk *pclk;
-	struct clk *pclk_src;
 	struct clk *phy_reset_clk;
 	struct clk *core_clk;
 	void __iomem *regs;
--
1.8.3.2

  parent reply	other threads:[~2014-04-22  9:21 UTC|newest]

Thread overview: 60+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-04-22  9:20 [PATCH v6 00/19] usb: phy: msm: Fixes, cleanups and DT support Ivan T. Ivanov
2014-04-22  9:20 ` [PATCH v6 01/19] usb: phy: msm: Make driver selectable on ARCH_QCOM Ivan T. Ivanov
     [not found]   ` <1398158438-21579-2-git-send-email-iivanov-NEYub+7Iv8PQT0dZR+AlfA@public.gmane.org>
2014-04-22 14:57     ` Felipe Balbi
2014-04-22 14:57       ` Felipe Balbi
2014-04-22 15:16       ` Ivan T. Ivanov
2014-04-22 15:24         ` Felipe Balbi
2014-04-22 15:24           ` Felipe Balbi
     [not found]           ` <20140422152425.GL5524-HgARHv6XitL9zxVx7UNMDg@public.gmane.org>
2014-04-23  8:48             ` Ivan T. Ivanov
2014-04-23  8:48               ` Ivan T. Ivanov
2014-04-23 15:02               ` Felipe Balbi
2014-04-23 15:02                 ` Felipe Balbi
2014-04-22  9:20 ` [PATCH v6 02/19] usb: phy: msm: Remove __init macro from driver probe method Ivan T. Ivanov
2014-04-22  9:20 ` [PATCH v6 06/19] usb: phy: msm: Fix checkpatch.pl warnings Ivan T. Ivanov
2014-04-22 15:30   ` Srinivas Kandagatla
2014-04-23  6:51     ` Ivan T. Ivanov
2014-04-22  9:20 ` [PATCH v6 07/19] usb: phy: msm: Replace custom enum usb_mode_type with enum usb_dr_mode Ivan T. Ivanov
2014-04-22  9:20 ` Ivan T. Ivanov [this message]
2014-04-22  9:20 ` [PATCH v6 10/19] usb: phy: msm: Properly check result from platform_get_irq() Ivan T. Ivanov
2014-04-22  9:20 ` [PATCH v6 11/19] usb: phy: msm: Add device tree support and binding information Ivan T. Ivanov
     [not found]   ` <1398158438-21579-12-git-send-email-iivanov-NEYub+7Iv8PQT0dZR+AlfA@public.gmane.org>
2014-04-22 16:05     ` Srinivas Kandagatla
2014-04-22 16:05       ` Srinivas Kandagatla
2014-04-23  7:48       ` Ivan T. Ivanov
2014-04-22  9:20 ` [PATCH v6 12/19] usb: phy: msm: Use reset framework for LINK and PHY resets Ivan T. Ivanov
2014-04-22  9:20 ` [PATCH v6 13/19] usb: phy: msm: Add support for secondary PHY control Ivan T. Ivanov
2014-04-22  9:20 ` [PATCH v6 14/19] usb: phy: msm: Correct USB PHY Reset sequence for newer platform Ivan T. Ivanov
2014-04-22  9:20 ` [PATCH v6 15/19] usb: phy: msm: Fix PTS definitions for MSM USB controller Ivan T. Ivanov
     [not found]   ` <1398158438-21579-16-git-send-email-iivanov-NEYub+7Iv8PQT0dZR+AlfA@public.gmane.org>
2014-04-22 13:09     ` Sergei Shtylyov
2014-04-22 13:09       ` Sergei Shtylyov
2014-04-23 13:24       ` Ivan T. Ivanov
2014-04-23 13:35         ` Ivan T. Ivanov
2014-04-23 13:45           ` Sergei Shtylyov
2014-04-23 13:45             ` Sergei Shtylyov
2014-04-23 13:53             ` Ivan T. Ivanov
2014-04-23 14:09               ` Sergei Shtylyov
     [not found]                 ` <5357C99F.6070009-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
2014-04-23 14:14                   ` Ivan T. Ivanov
2014-04-23 14:14                     ` Ivan T. Ivanov
2014-04-23 14:31                     ` Sergei Shtylyov
2014-04-22  9:20 ` [PATCH v6 17/19] usb: phy: msm: Handle disconnect events Ivan T. Ivanov
     [not found] ` <1398158438-21579-1-git-send-email-iivanov-NEYub+7Iv8PQT0dZR+AlfA@public.gmane.org>
2014-04-22  9:20   ` [PATCH v6 03/19] usb: phy: msm: Move global regulators variables to driver state Ivan T. Ivanov
2014-04-22  9:20     ` Ivan T. Ivanov
2014-04-22 14:57     ` Felipe Balbi
2014-04-22 14:57       ` Felipe Balbi
     [not found]       ` <20140422145745.GJ5524-HgARHv6XitL9zxVx7UNMDg@public.gmane.org>
2014-04-22 15:12         ` Ivan T. Ivanov
2014-04-22 15:12           ` Ivan T. Ivanov
2014-04-22 15:14           ` Felipe Balbi
2014-04-22 15:14             ` Felipe Balbi
2014-04-22  9:20   ` [PATCH v6 04/19] usb: phy: msm: Migrate to Managed Device Resource allocation Ivan T. Ivanov
2014-04-22  9:20     ` Ivan T. Ivanov
     [not found]     ` <1398158438-21579-5-git-send-email-iivanov-NEYub+7Iv8PQT0dZR+AlfA@public.gmane.org>
2014-04-22 15:07       ` Srinivas Kandagatla
2014-04-22 15:07         ` Srinivas Kandagatla
2014-04-22 15:19         ` Ivan T. Ivanov
2014-04-22  9:20   ` [PATCH v6 05/19] usb: phy: msm: Remove unnecessarily check for valid regulators Ivan T. Ivanov
2014-04-22  9:20     ` Ivan T. Ivanov
2014-04-22  9:20   ` [PATCH v6 09/19] usb: phy: msm: Remove HSUSB prefix from regulator names Ivan T. Ivanov
2014-04-22  9:20     ` Ivan T. Ivanov
2014-04-22  9:20   ` [PATCH v6 16/19] usb: phy: msm: Select secondary PHY via TCSR Ivan T. Ivanov
2014-04-22  9:20     ` Ivan T. Ivanov
2014-04-22  9:20   ` [PATCH v6 18/19] usb: phy: msm: Vote for corner of VDD CX instead of voltage of VDD CX Ivan T. Ivanov
2014-04-22  9:20     ` Ivan T. Ivanov
2014-04-22  9:20 ` [PATCH v6 19/19] usb: phy: msm: Use usb_add_phy_dev() to register device Ivan T. Ivanov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1398158438-21579-9-git-send-email-iivanov@mm-sol.com \
    --to=iivanov@mm-sol.com \
    --cc=balbi@ti.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.