From: Inki Dae <inki.dae@samsung.com>
To: dri-devel@lists.freedesktop.org
Cc: airlied@linux.ie, linux-samsung-soc@vger.kernel.org,
Gustavo Padovan <gustavo.padovan@collabora.co.uk>,
Inki Dae <inki.dae@samsung.com>
Subject: [PATCH v3] drm/exynos: add pm_runtime to Mixer
Date: Thu, 26 Nov 2015 20:53:54 +0900 [thread overview]
Message-ID: <1448538834-26378-5-git-send-email-inki.dae@samsung.com> (raw)
In-Reply-To: <1448538834-26378-1-git-send-email-inki.dae@samsung.com>
From: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Let pm_runtime handle the enabling/disabling of the device with proper
refcnt instead of rely on specific flags to track the enabled state.
Changelog v3:
- revive MXR_BIT_POWERED flag to keep current dpms mode.
Changelog v2:
- no change
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
---
drivers/gpu/drm/exynos/exynos_mixer.c | 106 ++++++++++++++++++++--------------
1 file changed, 64 insertions(+), 42 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c
index d09f8f9..47777be 100644
--- a/drivers/gpu/drm/exynos/exynos_mixer.c
+++ b/drivers/gpu/drm/exynos/exynos_mixer.c
@@ -1020,43 +1020,12 @@ static void mixer_enable(struct exynos_drm_crtc *crtc)
{
struct mixer_context *ctx = crtc->ctx;
struct mixer_resources *res = &ctx->mixer_res;
- int ret;
if (test_bit(MXR_BIT_POWERED, &ctx->flags))
return;
pm_runtime_get_sync(ctx->dev);
- ret = clk_prepare_enable(res->mixer);
- if (ret < 0) {
- DRM_ERROR("Failed to prepare_enable the mixer clk [%d]\n", ret);
- return;
- }
- ret = clk_prepare_enable(res->hdmi);
- if (ret < 0) {
- DRM_ERROR("Failed to prepare_enable the hdmi clk [%d]\n", ret);
- return;
- }
- if (ctx->vp_enabled) {
- ret = clk_prepare_enable(res->vp);
- if (ret < 0) {
- DRM_ERROR("Failed to prepare_enable the vp clk [%d]\n",
- ret);
- return;
- }
- if (ctx->has_sclk) {
- ret = clk_prepare_enable(res->sclk_mixer);
- if (ret < 0) {
- DRM_ERROR("Failed to prepare_enable the " \
- "sclk_mixer clk [%d]\n",
- ret);
- return;
- }
- }
- }
-
- set_bit(MXR_BIT_POWERED, &ctx->flags);
-
mixer_reg_writemask(res, MXR_STATUS, ~0, MXR_STATUS_SOFT_RESET);
if (test_bit(MXR_BIT_VSYNC, &ctx->flags)) {
@@ -1064,12 +1033,13 @@ static void mixer_enable(struct exynos_drm_crtc *crtc)
mixer_reg_writemask(res, MXR_INT_EN, ~0, MXR_INT_EN_VSYNC);
}
mixer_win_reset(ctx);
+
+ set_bit(MXR_BIT_POWERED, &ctx->flags);
}
static void mixer_disable(struct exynos_drm_crtc *crtc)
{
struct mixer_context *ctx = crtc->ctx;
- struct mixer_resources *res = &ctx->mixer_res;
int i;
if (!test_bit(MXR_BIT_POWERED, &ctx->flags))
@@ -1081,17 +1051,9 @@ static void mixer_disable(struct exynos_drm_crtc *crtc)
for (i = 0; i < MIXER_WIN_NR; i++)
mixer_disable_plane(crtc, &ctx->planes[i]);
- clear_bit(MXR_BIT_POWERED, &ctx->flags);
+ pm_runtime_put(ctx->dev);
- clk_disable_unprepare(res->hdmi);
- clk_disable_unprepare(res->mixer);
- if (ctx->vp_enabled) {
- clk_disable_unprepare(res->vp);
- if (ctx->has_sclk)
- clk_disable_unprepare(res->sclk_mixer);
- }
-
- pm_runtime_put_sync(ctx->dev);
+ clear_bit(MXR_BIT_POWERED, &ctx->flags);
}
/* Only valid for Mixer version 16.0.33.0 */
@@ -1293,10 +1255,70 @@ static int mixer_remove(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_PM_SLEEP
+static int exynos_mixer_suspend(struct device *dev)
+{
+ struct mixer_context *ctx = dev_get_drvdata(dev);
+ struct mixer_resources *res = &ctx->mixer_res;
+
+ clk_disable_unprepare(res->hdmi);
+ clk_disable_unprepare(res->mixer);
+ if (ctx->vp_enabled) {
+ clk_disable_unprepare(res->vp);
+ if (ctx->has_sclk)
+ clk_disable_unprepare(res->sclk_mixer);
+ }
+
+ return 0;
+}
+
+static int exynos_mixer_resume(struct device *dev)
+{
+ struct mixer_context *ctx = dev_get_drvdata(dev);
+ struct mixer_resources *res = &ctx->mixer_res;
+ int ret;
+
+ ret = clk_prepare_enable(res->mixer);
+ if (ret < 0) {
+ DRM_ERROR("Failed to prepare_enable the mixer clk [%d]\n", ret);
+ return ret;
+ }
+ ret = clk_prepare_enable(res->hdmi);
+ if (ret < 0) {
+ DRM_ERROR("Failed to prepare_enable the hdmi clk [%d]\n", ret);
+ return ret;
+ }
+ if (ctx->vp_enabled) {
+ ret = clk_prepare_enable(res->vp);
+ if (ret < 0) {
+ DRM_ERROR("Failed to prepare_enable the vp clk [%d]\n",
+ ret);
+ return ret;
+ }
+ if (ctx->has_sclk) {
+ ret = clk_prepare_enable(res->sclk_mixer);
+ if (ret < 0) {
+ DRM_ERROR("Failed to prepare_enable the " \
+ "sclk_mixer clk [%d]\n",
+ ret);
+ return ret;
+ }
+ }
+ }
+
+ return 0;
+}
+#endif
+
+static const struct dev_pm_ops exynos_mixer_pm_ops = {
+ SET_RUNTIME_PM_OPS(exynos_mixer_suspend, exynos_mixer_resume, NULL)
+};
+
struct platform_driver mixer_driver = {
.driver = {
.name = "exynos-mixer",
.owner = THIS_MODULE,
+ .pm = &exynos_mixer_pm_ops,
.of_match_table = mixer_match_types,
},
.probe = mixer_probe,
--
1.9.1
prev parent reply other threads:[~2015-11-26 11:53 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-26 11:53 [PATCH v3] drm/exynos: add pm_runtime to DECON 7 Inki Dae
2015-11-26 11:53 ` [PATCH v3] drm/exynos: add pm_runtime to DP Inki Dae
2015-11-26 11:53 ` [PATCH v3] drm/exynos: add pm_runtime to FIMD Inki Dae
2015-11-26 11:53 ` [PATCH v3] drm/exynos: add pm_runtime to HDMI Inki Dae
2015-11-26 11:53 ` Inki Dae [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1448538834-26378-5-git-send-email-inki.dae@samsung.com \
--to=inki.dae@samsung.com \
--cc=airlied@linux.ie \
--cc=dri-devel@lists.freedesktop.org \
--cc=gustavo.padovan@collabora.co.uk \
--cc=linux-samsung-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.