From: Wen Congyang <wency@cn.fujitsu.com>
To: xen devel <xen-devel@lists.xen.org>,
Andrew Cooper <andrew.cooper3@citrix.com>,
Ian Campbell <ian.campbell@citrix.com>,
Ian Jackson <ian.jackson@eu.citrix.com>,
Wei Liu <wei.liu2@citrix.com>
Cc: Lars Kurth <lars.kurth@citrix.com>,
Changlong Xie <xiecl.fnst@cn.fujitsu.com>,
Wen Congyang <wency@cn.fujitsu.com>,
Gui Jianfeng <guijianfeng@cn.fujitsu.com>,
Jiang Yunhong <yunhong.jiang@intel.com>,
Dong Eddie <eddie.dong@intel.com>,
Shriram Rajagopalan <rshriram@cs.ubc.ca>,
Yang Hongyang <hongyang.yang@easystack.cn>
Subject: [PATCH v9 18/25] Support colo mode for qemu disk
Date: Wed, 30 Dec 2015 10:37:48 +0800 [thread overview]
Message-ID: <1451443075-27428-19-git-send-email-wency@cn.fujitsu.com> (raw)
In-Reply-To: <1451443075-27428-1-git-send-email-wency@cn.fujitsu.com>
Usage: disk = ['...,colo,colo-host=xxx,colo-port=xxx,colo-export=xxx,active-disk=xxx,hidden-disk=xxx...']
For QEMU block replication details:
http://wiki.qemu.org/Features/BlockReplication
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Yang Hongyang <hongyang.yang@easystack.cn>
---
docs/man/xl.pod.1 | 2 +-
docs/misc/xl-disk-configuration.txt | 50 ++++++++++
tools/libxl/libxl.c | 62 +++++++++++-
tools/libxl/libxl_create.c | 25 ++++-
tools/libxl/libxl_device.c | 54 +++++++++++
tools/libxl/libxl_dm.c | 184 ++++++++++++++++++++++++++++++++++--
tools/libxl/libxl_types.idl | 7 ++
tools/libxl/libxlu_disk_l.l | 7 ++
8 files changed, 382 insertions(+), 9 deletions(-)
diff --git a/docs/man/xl.pod.1 b/docs/man/xl.pod.1
index 1c6dd87..4f1901d 100644
--- a/docs/man/xl.pod.1
+++ b/docs/man/xl.pod.1
@@ -454,7 +454,7 @@ N.B: Remus support in xl is still in experimental (proof-of-concept) phase.
Disk replication support is limited to DRBD disks.
COLO support in xl is still in experimental (proof-of-concept) phase.
- There is no support for network or disk at the moment.
+ There is no support for network at the moment.
B<OPTIONS>
diff --git a/docs/misc/xl-disk-configuration.txt b/docs/misc/xl-disk-configuration.txt
index 6a2118d..5be4e76 100644
--- a/docs/misc/xl-disk-configuration.txt
+++ b/docs/misc/xl-disk-configuration.txt
@@ -234,6 +234,56 @@ were intentionally created non-sparse to avoid fragmentation of the
file.
+===============
+COLO PARAMETERS
+===============
+
+
+colo
+----
+
+Enable COLO HA for disk. For better understanding block replication on
+QEMU, please refer to:
+http://wiki.qemu.org/Features/BlockReplication
+
+
+colo-host
+---------
+Description: Secondary host's address
+Mandatory: Yes when COLO enabled
+
+
+colo-port
+---------
+Description: Secondary port
+ We will run a nbd server on secondary host,
+ and the nbd server will listen this port.
+Mandatory: Yes when COLO enabled
+
+
+colo-export
+---------
+Description: We will run a nbd server on secondary host,
+ exportname is the nbd server's disk export name.
+Mandatory: Yes when COLO enabled
+
+
+active-disk
+-----------
+
+Description: This is used by secondary. Secondary guest's write
+ will be buffered in this disk.
+Mandatory: Yes when COLO enabled
+
+
+hidden-disk
+-----------
+
+Description: This is used by secondary. It buffers the original
+ content that is modified by the primary VM.
+Mandatory: Yes when COLO enabled
+
+
============================================
DEPRECATED PARAMETERS, PREFIXES AND SYNTAXES
============================================
diff --git a/tools/libxl/libxl.c b/tools/libxl/libxl.c
index ca6bca1..e770723 100644
--- a/tools/libxl/libxl.c
+++ b/tools/libxl/libxl.c
@@ -2315,6 +2315,8 @@ int libxl__device_disk_setdefault(libxl__gc *gc, libxl_device_disk *disk)
int rc;
libxl_defbool_setdefault(&disk->discard_enable, !!disk->readwrite);
+ libxl_defbool_setdefault(&disk->colo_enable, false);
+ libxl_defbool_setdefault(&disk->colo_restore_enable, false);
rc = libxl__resolve_domid(gc, disk->backend_domname, &disk->backend_domid);
if (rc < 0) return rc;
@@ -2513,6 +2515,18 @@ static void device_disk_add(libxl__egc *egc, uint32_t domid,
flexarray_append(back, "params");
flexarray_append(back, GCSPRINTF("%s:%s",
libxl__device_disk_string_of_format(disk->format), disk->pdev_path));
+ if (libxl_defbool_val(disk->colo_enable)) {
+ flexarray_append(back, "colo-host");
+ flexarray_append(back, libxl__sprintf(gc, "%s", disk->colo_host));
+ flexarray_append(back, "colo-port");
+ flexarray_append(back, libxl__sprintf(gc, "%s", disk->colo_port));
+ flexarray_append(back, "colo-export");
+ flexarray_append(back, libxl__sprintf(gc, "%s", disk->colo_export));
+ flexarray_append(back, "active-disk");
+ flexarray_append(back, libxl__sprintf(gc, "%s", disk->active_disk));
+ flexarray_append(back, "hidden-disk");
+ flexarray_append(back, libxl__sprintf(gc, "%s", disk->hidden_disk));
+ }
assert(device->backend_kind == LIBXL__DEVICE_KIND_QDISK);
break;
default:
@@ -2628,7 +2642,10 @@ static int libxl__device_disk_from_xs_be(libxl__gc *gc,
goto cleanup;
}
- /* "params" may not be present; but everything else must be. */
+ /*
+ * "params" and "colo-host" may not be present; but everything
+ * else must be.
+ */
tmp = xs_read(ctx->xsh, XBT_NULL,
GCSPRINTF("%s/params", be_path), &len);
if (tmp && strchr(tmp, ':')) {
@@ -2638,6 +2655,49 @@ static int libxl__device_disk_from_xs_be(libxl__gc *gc,
disk->pdev_path = tmp;
}
+ tmp = xs_read(ctx->xsh, XBT_NULL,
+ GCSPRINTF("%s/colo-host", be_path), &len);
+ if (tmp) {
+ libxl_defbool_set(&disk->colo_enable, true);
+ disk->colo_host = tmp;
+ } else {
+ libxl_defbool_set(&disk->colo_enable, false);
+ }
+
+ if (libxl_defbool_val(disk->colo_enable)) {
+ tmp = xs_read(ctx->xsh, XBT_NULL,
+ GCSPRINTF("%s/colo-port", be_path), &len);
+ if (!tmp) {
+ LOG(ERROR, "Missing xenstore node %s/colo-port", be_path);
+ goto cleanup;
+ }
+ disk->colo_port = tmp;
+
+ tmp = xs_read(ctx->xsh, XBT_NULL,
+ GCSPRINTF("%s/colo-export", be_path), &len);
+ if (!tmp) {
+ LOG(ERROR, "Missing xenstore node %s/colo-export", be_path);
+ goto cleanup;
+ }
+ disk->colo_export = tmp;
+
+ tmp = xs_read(ctx->xsh, XBT_NULL,
+ GCSPRINTF("%s/active-disk", be_path), &len);
+ if (!tmp) {
+ LOG(ERROR, "Missing xenstore node %s/active-disk", be_path);
+ goto cleanup;
+ }
+ disk->active_disk = tmp;
+
+ tmp = xs_read(ctx->xsh, XBT_NULL,
+ GCSPRINTF("%s/hidden-disk", be_path), &len);
+ if (!tmp) {
+ LOG(ERROR, "Missing xenstore node %s/hidden-disk", be_path);
+ goto cleanup;
+ }
+ disk->hidden_disk = tmp;
+ }
+
tmp = libxl__xs_read(gc, XBT_NULL,
GCSPRINTF("%s/type", be_path));
diff --git a/tools/libxl/libxl_create.c b/tools/libxl/libxl_create.c
index b495741..7cb3c6a 100644
--- a/tools/libxl/libxl_create.c
+++ b/tools/libxl/libxl_create.c
@@ -1782,12 +1782,29 @@ static void domain_create_cb(libxl__egc *egc,
libxl__ao_complete(egc, ao, rc);
}
-
+
+static void set_disk_colo_restore(libxl_domain_config *d_config)
+{
+ int i;
+
+ for (i = 0; i < d_config->num_disks; i++)
+ libxl_defbool_set(&d_config->disks[i].colo_restore_enable, true);
+}
+
+static void unset_disk_colo_restore(libxl_domain_config *d_config)
+{
+ int i;
+
+ for (i = 0; i < d_config->num_disks; i++)
+ libxl_defbool_set(&d_config->disks[i].colo_restore_enable, false);
+}
+
int libxl_domain_create_new(libxl_ctx *ctx, libxl_domain_config *d_config,
uint32_t *domid,
const libxl_asyncop_how *ao_how,
const libxl_asyncprogress_how *aop_console_how)
{
+ unset_disk_colo_restore(d_config);
return do_domain_create(ctx, d_config, domid, -1, -1, NULL,
ao_how, aop_console_how);
}
@@ -1798,6 +1815,12 @@ int libxl_domain_create_restore(libxl_ctx *ctx, libxl_domain_config *d_config,
const libxl_asyncop_how *ao_how,
const libxl_asyncprogress_how *aop_console_how)
{
+ if (params->checkpointed_stream == LIBXL_CHECKPOINTED_STREAM_COLO) {
+ set_disk_colo_restore(d_config);
+ } else {
+ unset_disk_colo_restore(d_config);
+ }
+
return do_domain_create(ctx, d_config, domid, restore_fd, send_fd, params,
ao_how, aop_console_how);
}
diff --git a/tools/libxl/libxl_device.c b/tools/libxl/libxl_device.c
index 8bb5e93..039afc6 100644
--- a/tools/libxl/libxl_device.c
+++ b/tools/libxl/libxl_device.c
@@ -196,6 +196,10 @@ static int disk_try_backend(disk_try_backend_args *a,
goto bad_format;
}
+ if (libxl_defbool_val(a->disk->colo_enable) ||
+ a->disk->active_disk || a->disk->hidden_disk)
+ goto bad_colo;
+
if (a->disk->backend_domid != LIBXL_TOOLSTACK_DOMID) {
LOG(DEBUG, "Disk vdev=%s, is using a storage driver domain, "
"skipping physical device check", a->disk->vdev);
@@ -218,6 +222,10 @@ static int disk_try_backend(disk_try_backend_args *a,
case LIBXL_DISK_BACKEND_TAP:
if (a->disk->script) goto bad_script;
+ if (libxl_defbool_val(a->disk->colo_enable) ||
+ a->disk->active_disk || a->disk->hidden_disk)
+ goto bad_colo;
+
if (a->disk->is_cdrom) {
LOG(DEBUG, "Disk vdev=%s, backend tap unsuitable for cdroms",
a->disk->vdev);
@@ -236,6 +244,22 @@ static int disk_try_backend(disk_try_backend_args *a,
case LIBXL_DISK_BACKEND_QDISK:
if (a->disk->script) goto bad_script;
+ if (libxl_defbool_val(a->disk->colo_enable)) {
+ if (!a->disk->colo_host)
+ goto bad_colo_host;
+
+ if (!a->disk->colo_port)
+ goto bad_colo_port;
+
+ if (!a->disk->colo_export)
+ goto bad_colo_export;
+
+ if (!a->disk->active_disk)
+ goto bad_active_disk;
+
+ if (!a->disk->hidden_disk)
+ goto bad_hidden_disk;
+ }
return backend;
default:
@@ -256,6 +280,36 @@ static int disk_try_backend(disk_try_backend_args *a,
LOG(DEBUG, "Disk vdev=%s, backend %s not compatible with script=...",
a->disk->vdev, libxl_disk_backend_to_string(backend));
return 0;
+
+ bad_colo:
+ LOG(DEBUG, "Disk vdev=%s, backend %s not compatible with colo",
+ a->disk->vdev, libxl_disk_backend_to_string(backend));
+ return 0;
+
+ bad_colo_host:
+ LOG(DEBUG, "Disk vdev=%s, backend %s needs colo-host=... for colo",
+ a->disk->vdev, libxl_disk_backend_to_string(backend));
+ return 0;
+
+ bad_colo_port:
+ LOG(DEBUG, "Disk vdev=%s, backend %s needs colo-port=... for colo",
+ a->disk->vdev, libxl_disk_backend_to_string(backend));
+ return 0;
+
+ bad_colo_export:
+ LOG(DEBUG, "Disk vdev=%s, backend %s needs colo-export=... for colo",
+ a->disk->vdev, libxl_disk_backend_to_string(backend));
+ return 0;
+
+ bad_active_disk:
+ LOG(DEBUG, "Disk vdev=%s, backend %s needs active-disk=... for colo",
+ a->disk->vdev, libxl_disk_backend_to_string(backend));
+ return 0;
+
+ bad_hidden_disk:
+ LOG(DEBUG, "Disk vdev=%s, backend %s needs hidden-disk=... for colo",
+ a->disk->vdev, libxl_disk_backend_to_string(backend));
+ return 0;
}
int libxl__device_disk_set_backend(libxl__gc *gc, libxl_device_disk *disk) {
diff --git a/tools/libxl/libxl_dm.c b/tools/libxl/libxl_dm.c
index 0aaefd9..f34b3ac 100644
--- a/tools/libxl/libxl_dm.c
+++ b/tools/libxl/libxl_dm.c
@@ -750,6 +750,139 @@ static int libxl__dm_runas_helper(libxl__gc *gc, const char *username)
}
}
+/* colo mode */
+enum {
+ LIBXL__COLO_NONE = 0,
+ LIBXL__COLO_PRIMARY,
+ LIBXL__COLO_SECONDARY,
+};
+
+static char *qemu_disk_scsi_drive_string(libxl__gc *gc, const char *pdev_path,
+ int unit, const char *format,
+ const libxl_device_disk *disk,
+ int colo_mode)
+{
+ char *drive = NULL;
+ const char *exportname = disk->colo_export;
+ const char *active_disk = disk->active_disk;
+ const char *hidden_disk = disk->hidden_disk;
+
+ switch (colo_mode) {
+ case LIBXL__COLO_NONE:
+ drive = libxl__sprintf
+ (gc, "file=%s,if=scsi,bus=0,unit=%d,format=%s,cache=writeback",
+ pdev_path, unit, format);
+ break;
+ case LIBXL__COLO_PRIMARY:
+ /*
+ * primary:
+ * -dirve if=scsi,bus=0,unit=x,cache=writeback,driver=quorum,\
+ * id=exportname,\
+ * children.0.file.filename=pdev_path,\
+ * children.0.driver=format,\
+ * read-pattern=fifo,\
+ * vote-threshold=1
+ */
+ drive = GCSPRINTF(
+ "if=scsi,bus=0,unit=%d,cache=writeback,driver=quorum,"
+ "id=%s,"
+ "children.0.file.filename=%s,"
+ "children.0.driver=%s,"
+ "read-pattern=fifo,"
+ "vote-threshold=1",
+ unit, exportname, pdev_path, format);
+ break;
+ case LIBXL__COLO_SECONDARY:
+ /*
+ * secondary:
+ * -drive if=scsi,bus=0,unit=x,cache=writeback,driver=replication,\
+ * mode=secondary,\
+ * file.driver=qcow2,\
+ * file.file.filename=active_disk,\
+ * file.backing.driver=qcow2,\
+ * file.backing.file.filename=hidden_disk,\
+ * file.backing.backing=exportname,
+ */
+ drive = GCSPRINTF(
+ "if=scsi,bus=0,unit=%d,cache=writeback,driver=replication,"
+ "mode=secondary,"
+ "file.driver=qcow2,"
+ "file.file.filename=%s,"
+ "file.backing.driver=qcow2,"
+ "file.backing.file.filename=%s,"
+ "file.backing.backing=%s",
+ unit, active_disk, hidden_disk, exportname);
+ break;
+ default:
+ abort();
+ }
+
+ return drive;
+}
+
+static char *qemu_disk_ide_drive_string(libxl__gc *gc, const char *pdev_path,
+ int unit, const char *format,
+ const libxl_device_disk *disk,
+ int colo_mode)
+{
+ char *drive = NULL;
+ const char *exportname = disk->colo_export;
+ const char *active_disk = disk->active_disk;
+ const char *hidden_disk = disk->hidden_disk;
+
+ switch (colo_mode) {
+ case LIBXL__COLO_NONE:
+ drive = GCSPRINTF
+ ("file=%s,if=ide,index=%d,media=disk,format=%s,cache=writeback",
+ pdev_path, unit, format);
+ break;
+ case LIBXL__COLO_PRIMARY:
+ /*
+ * primary:
+ * -dirve if=ide,index=x,media=disk,cache=writeback,driver=quorum,\
+ * id=exportname,\
+ * children.0.file.filename=pdev_path,\
+ * children.0.driver=format,\
+ * read-pattern=fifo,\
+ * vote-threshold=1
+ */
+ drive = GCSPRINTF(
+ "if=ide,index=%d,media=disk,cache=writeback,driver=quorum,"
+ "id=%s,"
+ "children.0.file.filename=%s,"
+ "children.0.driver=%s,"
+ "read-pattern=fifo,"
+ "vote-threshold=1",
+ unit, exportname, pdev_path, format);
+ break;
+ case LIBXL__COLO_SECONDARY:
+ /*
+ * secondary:
+ * -drive if=ide,index=x,media=disk,cache=writeback,driver=replication,\
+ * mode=secondary,\
+ * file.driver=qcow2,\
+ * file.file.filename=active_disk,\
+ * file.backing.driver=qcow2,\
+ * file.backing.file.filename=hidden_disk,\
+ * file.backing.backing=exportname,
+ */
+ drive = GCSPRINTF(
+ "if=ide,index=%d,media=disk,cache=writeback,driver=replication,"
+ "mode=secondary,"
+ "file.driver=qcow2,"
+ "file.file.filename=%s,"
+ "file.backing.driver=qcow2,"
+ "file.backing.file.filename=%s,"
+ "file.backing.backing=%s",
+ unit, active_disk, hidden_disk, exportname);
+ break;
+ default:
+ abort();
+ }
+
+ return drive;
+}
+
static int libxl__build_device_model_args_new(libxl__gc *gc,
const char *dm, int guest_domid,
const libxl_domain_config *guest_config,
@@ -1163,6 +1296,7 @@ static int libxl__build_device_model_args_new(libxl__gc *gc,
const char *format = qemu_disk_format_string(disks[i].format);
char *drive;
const char *pdev_path;
+ int colo_mode;
if (dev_number == -1) {
LOG(WARN, "unable to determine"" disk number for %s",
@@ -1207,10 +1341,32 @@ static int libxl__build_device_model_args_new(libxl__gc *gc,
* For other disks we translate devices 0..3 into
* hd[a-d] and ignore the rest.
*/
+ if (libxl_defbool_val(disks[i].colo_enable)) {
+ if (libxl_defbool_val(disks[i].colo_restore_enable))
+ colo_mode = LIBXL__COLO_SECONDARY;
+ else
+ colo_mode = LIBXL__COLO_PRIMARY;
+ } else {
+ colo_mode = LIBXL__COLO_NONE;
+ }
+
if (strncmp(disks[i].vdev, "sd", 2) == 0) {
- drive = libxl__sprintf
- (gc, "file=%s,if=scsi,bus=0,unit=%d,format=%s,readonly=%s,cache=writeback",
- pdev_path, disk, format, disks[i].readwrite ? "off" : "on");
+ if (colo_mode == LIBXL__COLO_SECONDARY) {
+ /*
+ * -drive if=none,driver=format,file=pdev_path,\
+ * id=exportname
+ */
+ drive = libxl__sprintf
+ (gc, "if=none,driver=%s,file=%s,id=%s",
+ format, pdev_path, disks[i].colo_export);
+
+ flexarray_append(dm_args, "-drive");
+ flexarray_append(dm_args, drive);
+ }
+ drive = qemu_disk_scsi_drive_string(gc, pdev_path, disk,
+ format,
+ &disks[i],
+ colo_mode);
} else if (strncmp(disks[i].vdev, "xvd", 3) == 0) {
/*
* Do not add any emulated disk when PV disk are
@@ -1233,12 +1389,28 @@ static int libxl__build_device_model_args_new(libxl__gc *gc,
LOG(ERROR, "qemu-xen doesn't support read-only IDE disk drivers");
return ERROR_INVAL;
}
- drive = libxl__sprintf
- (gc, "file=%s,if=ide,index=%d,media=disk,format=%s,cache=writeback",
- pdev_path, disk, format);
+ if (colo_mode == LIBXL__COLO_SECONDARY) {
+ /*
+ * -drive if=none,driver=format,file=pdev_path,\
+ * id=exportname
+ */
+ drive = libxl__sprintf
+ (gc, "if=none,driver=%s,file=%s,id=%s",
+ format, pdev_path, disks[i].colo_export);
+
+ flexarray_append(dm_args, "-drive");
+ flexarray_append(dm_args, drive);
+ }
+ drive = qemu_disk_ide_drive_string(gc, pdev_path, disk,
+ format,
+ &disks[i],
+ colo_mode);
} else {
continue; /* Do not emulate this disk */
}
+
+ if (!drive)
+ continue;
}
flexarray_append(dm_args, "-drive");
diff --git a/tools/libxl/libxl_types.idl b/tools/libxl/libxl_types.idl
index 7c46bc2..38f37f2 100644
--- a/tools/libxl/libxl_types.idl
+++ b/tools/libxl/libxl_types.idl
@@ -574,6 +574,13 @@ libxl_device_disk = Struct("device_disk", [
("is_cdrom", integer),
("direct_io_safe", bool),
("discard_enable", libxl_defbool),
+ ("colo_enable", libxl_defbool),
+ ("colo_restore_enable", libxl_defbool),
+ ("colo_host", string),
+ ("colo_port", string),
+ ("colo_export", string),
+ ("active_disk", string),
+ ("hidden_disk", string)
])
libxl_device_nic = Struct("device_nic", [
diff --git a/tools/libxl/libxlu_disk_l.l b/tools/libxl/libxlu_disk_l.l
index 1a5deb5..58da943 100644
--- a/tools/libxl/libxlu_disk_l.l
+++ b/tools/libxl/libxlu_disk_l.l
@@ -176,6 +176,13 @@ script=[^,]*,? { STRIP(','); SAVESTRING("script", script, FROMEQUALS); }
direct-io-safe,? { DPC->disk->direct_io_safe = 1; }
discard,? { libxl_defbool_set(&DPC->disk->discard_enable, true); }
no-discard,? { libxl_defbool_set(&DPC->disk->discard_enable, false); }
+colo,? { libxl_defbool_set(&DPC->disk->colo_enable, true); }
+no-colo,? { libxl_defbool_set(&DPC->disk->colo_enable, false); }
+colo-host=[^,]*,? { STRIP(','); SAVESTRING("colo-host", colo_host, FROMEQUALS); }
+colo-port=[^,]*,? { STRIP(','); SAVESTRING("colo-port", colo_port, FROMEQUALS); }
+colo-export=[^,]*,? { STRIP(','); SAVESTRING("colo-export", colo_export, FROMEQUALS); }
+active-disk=[^,]*,? { STRIP(','); SAVESTRING("active-disk", active_disk, FROMEQUALS); }
+hidden-disk=[^,]*,? { STRIP(','); SAVESTRING("hidden-disk", hidden_disk, FROMEQUALS); }
/* the target magic parameter, eats the rest of the string */
--
2.5.0
next prev parent reply other threads:[~2015-12-30 2:37 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-30 2:37 [PATCH v9 00/25] COarse-grain LOck-stepping Virtual Machines for Non-stop Service Wen Congyang
2015-12-30 2:37 ` [PATCH v9 01/25] docs: add colo readme Wen Congyang
2015-12-30 2:37 ` [PATCH v9 02/25] docs/libxl: Introduce COLO_CONTEXT to support migration v2 colo streams Wen Congyang
2016-01-26 20:40 ` Konrad Rzeszutek Wilk
2016-01-27 6:47 ` Wen Congyang
2016-01-27 11:00 ` Andrew Cooper
2016-01-27 15:11 ` Konrad Rzeszutek Wilk
2016-01-27 15:15 ` Andrew Cooper
2016-01-27 15:28 ` Konrad Rzeszutek Wilk
2016-01-27 15:30 ` Andrew Cooper
2016-01-27 16:01 ` Ian Jackson
2015-12-30 2:37 ` [PATCH v9 03/25] libxc/migration: Specification update for DIRTY_PFN_LIST records Wen Congyang
2016-01-26 20:44 ` Konrad Rzeszutek Wilk
2016-01-27 6:47 ` Wen Congyang
2016-01-27 7:12 ` Wen Congyang
2016-01-27 10:00 ` Ian Campbell
2016-01-27 11:01 ` Andrew Cooper
2015-12-30 2:37 ` [PATCH v9 04/25] libxc/migration: export read_record for common use Wen Congyang
2016-01-26 20:45 ` Konrad Rzeszutek Wilk
2016-01-27 0:57 ` Wen Congyang
2015-12-30 2:37 ` [PATCH v9 05/25] tools/libxl: add back channel support to write stream Wen Congyang
2015-12-30 2:37 ` [PATCH v9 06/25] tools/libxl: write checkpoint_state records into the stream Wen Congyang
2015-12-30 2:37 ` [PATCH v9 07/25] tools/libxl: add back channel support to read stream Wen Congyang
2015-12-30 2:37 ` [PATCH v9 08/25] tools/libxl: handle checkpoint_state records in a libxl migration v2 " Wen Congyang
2015-12-30 2:37 ` [PATCH v9 09/25] tools/libx{l, c}: introduce should_checkpoint callback Wen Congyang
2016-01-26 20:50 ` Konrad Rzeszutek Wilk
2016-01-26 21:09 ` Konrad Rzeszutek Wilk
2016-01-27 1:03 ` Wen Congyang
2016-01-27 1:18 ` Wen Congyang
2015-12-30 2:37 ` [PATCH v9 10/25] tools/libx{l, c}: add postcopy/suspend callback to restore side Wen Congyang
2015-12-30 2:37 ` [PATCH v9 11/25] secondary vm suspend/resume/checkpoint code Wen Congyang
2015-12-30 2:37 ` [PATCH v9 12/25] primary " Wen Congyang
2015-12-30 2:37 ` [PATCH v9 13/25] libxc/restore: support COLO restore Wen Congyang
2015-12-30 2:37 ` [PATCH v9 14/25] libxc/restore: send dirty pfn list to primary when checkpoint under colo Wen Congyang
2015-12-30 2:37 ` [PATCH v9 15/25] send store gfn and console gfn to xl before resuming secondary vm Wen Congyang
2015-12-30 2:37 ` [PATCH v9 16/25] libxc/save: support COLO save Wen Congyang
2015-12-30 2:37 ` [PATCH v9 17/25] implement the cmdline for COLO Wen Congyang
2015-12-30 2:37 ` Wen Congyang [this message]
2015-12-30 2:37 ` [PATCH v9 19/25] COLO: use qemu block replication Wen Congyang
2015-12-30 2:37 ` [PATCH v9 20/25] COLO proxy: implement setup/teardown of COLO proxy module Wen Congyang
2015-12-30 2:37 ` [PATCH v9 21/25] COLO proxy: preresume, postresume and checkpoint Wen Congyang
2015-12-30 2:37 ` [PATCH v9 22/25] COLO nic: implement COLO nic subkind Wen Congyang
2015-12-30 2:37 ` [PATCH v9 23/25] setup and control colo proxy on primary side Wen Congyang
2015-12-30 2:37 ` [PATCH v9 24/25] setup and control colo proxy on secondary side Wen Congyang
2015-12-30 2:37 ` [PATCH v9 25/25] cmdline switches and config vars to control colo-proxy Wen Congyang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1451443075-27428-19-git-send-email-wency@cn.fujitsu.com \
--to=wency@cn.fujitsu.com \
--cc=andrew.cooper3@citrix.com \
--cc=eddie.dong@intel.com \
--cc=guijianfeng@cn.fujitsu.com \
--cc=hongyang.yang@easystack.cn \
--cc=ian.campbell@citrix.com \
--cc=ian.jackson@eu.citrix.com \
--cc=lars.kurth@citrix.com \
--cc=rshriram@cs.ubc.ca \
--cc=wei.liu2@citrix.com \
--cc=xen-devel@lists.xen.org \
--cc=xiecl.fnst@cn.fujitsu.com \
--cc=yunhong.jiang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.