[PATCH v2 04/13] libxc: Implementation of XEN_XSPLICE_op in libxc (v4).

From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
To: xen-devel@lists.xenproject.org, ross.lagerwall@citrix.com,
	mpohlack@amazon.com, andrew.cooper3@citrix.com,
	stefano.stabellini@citrix.com, jbeulich@suse.com,
	ian.jackson@eu.citrix.com, ian.campbell@citrix.com,
	wei.liu2@citrix.com, sasha.levin@oracle.com
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Subject: [PATCH v2 04/13] libxc: Implementation of XEN_XSPLICE_op in libxc (v4).
Date: Thu, 14 Jan 2016 16:47:02 -0500	[thread overview]
Message-ID: <1452808031-706-5-git-send-email-konrad.wilk@oracle.com> (raw)
In-Reply-To: <1452808031-706-1-git-send-email-konrad.wilk@oracle.com>

The underlaying toolstack code to do the basic
operations when using the XEN_XSPLICE_op syscalls:
 - upload the payload,
 - get status of an payload,
 - list all the payloads,
 - apply, check, replace, and revert the payload.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
---
v2: Actually set zero for the _pad entries.
v3: Split status into state and error code.
    Add REPLACE action.
v4: Use timeout and utilize pads.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
 tools/libxc/include/xenctrl.h |  18 +++
 tools/libxc/xc_misc.c         | 284 ++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 302 insertions(+)

diff --git a/tools/libxc/include/xenctrl.h b/tools/libxc/include/xenctrl.h
index 01a6dda..bb80c8d 100644
--- a/tools/libxc/include/xenctrl.h
+++ b/tools/libxc/include/xenctrl.h
@@ -2851,6 +2851,24 @@ int xc_psr_cat_get_l3_info(xc_interface *xch, uint32_t socket,
                            bool *cdp_enabled);
 #endif
 
+int xc_xsplice_upload(xc_interface *xch,
+                      char *name, char *payload, uint32_t size);
+
+int xc_xsplice_get(xc_interface *xch,
+                   char *name,
+                   xen_xsplice_status_t *status);
+
+int xc_xsplice_list(xc_interface *xch, unsigned int max, unsigned int start,
+                    xen_xsplice_status_t *info, char *name,
+                    uint32_t *len, unsigned int *done,
+                    unsigned int *left);
+
+int xc_xsplice_apply(xc_interface *xch, char *name, uint32_t timeout);
+int xc_xsplice_revert(xc_interface *xch, char *name, uint32_t timeout);
+int xc_xsplice_unload(xc_interface *xch, char *name, uint32_t timeout);
+int xc_xsplice_check(xc_interface *xch, char *name, uint32_t timeout);
+int xc_xsplice_replace(xc_interface *xch, char *name, uint32_t timeout);
+
 #endif /* XENCTRL_H */
 
 /*
diff --git a/tools/libxc/xc_misc.c b/tools/libxc/xc_misc.c
index c613545..beadcb1 100644
--- a/tools/libxc/xc_misc.c
+++ b/tools/libxc/xc_misc.c
@@ -718,6 +718,290 @@ int xc_hvm_inject_trap(
     return rc;
 }
 
+int xc_xsplice_upload(xc_interface *xch,
+                      char *name,
+                      char *payload,
+                      uint32_t size)
+{
+    int rc;
+    DECLARE_SYSCTL;
+    DECLARE_HYPERCALL_BOUNCE(payload, size, XC_HYPERCALL_BUFFER_BOUNCE_IN);
+    DECLARE_HYPERCALL_BOUNCE(name, 0 /* adjust later */, XC_HYPERCALL_BUFFER_BOUNCE_IN);
+    xen_xsplice_name_t def_name = { .pad = { 0, 0, 0 } };
+
+    if ( !name || !payload )
+        return -1;
+
+    def_name.size = strlen(name);
+    if ( def_name.size > XEN_XSPLICE_NAME_SIZE )
+        return -1;
+
+    HYPERCALL_BOUNCE_SET_SIZE(name, def_name.size );
+
+    if ( xc_hypercall_bounce_pre(xch, name) )
+        return -1;
+
+    if ( xc_hypercall_bounce_pre(xch, payload) )
+        return -1;
+
+    sysctl.cmd = XEN_SYSCTL_xsplice_op;
+    sysctl.u.xsplice.cmd = XEN_SYSCTL_XSPLICE_UPLOAD;
+    sysctl.u.xsplice.pad = 0;
+    sysctl.u.xsplice.u.upload.size = size;
+    set_xen_guest_handle(sysctl.u.xsplice.u.upload.payload, payload);
+
+    sysctl.u.xsplice.u.upload.name = def_name;
+    set_xen_guest_handle(sysctl.u.xsplice.u.upload.name.name, name);
+
+    rc = do_sysctl(xch, &sysctl);
+
+    xc_hypercall_bounce_post(xch, payload);
+    xc_hypercall_bounce_post(xch, name);
+
+    return rc;
+}
+
+int xc_xsplice_get(xc_interface *xch,
+                   char *name,
+                   xen_xsplice_status_t *status)
+{
+    int rc;
+    DECLARE_SYSCTL;
+    DECLARE_HYPERCALL_BOUNCE(name, 0 /*adjust later */, XC_HYPERCALL_BUFFER_BOUNCE_IN);
+    xen_xsplice_name_t def_name = { .pad = { 0, 0, 0 } };
+
+    if ( !name )
+        return -1;
+
+    def_name.size = strlen(name);
+    if ( def_name.size > XEN_XSPLICE_NAME_SIZE )
+        return -1;
+
+    HYPERCALL_BOUNCE_SET_SIZE(name, def_name.size );
+
+    if ( xc_hypercall_bounce_pre(xch, name) )
+        return -1;
+
+    sysctl.cmd = XEN_SYSCTL_xsplice_op;
+    sysctl.u.xsplice.cmd = XEN_SYSCTL_XSPLICE_GET;
+    sysctl.u.xsplice.pad = 0;
+
+    sysctl.u.xsplice.u.get.status.state = 0;
+    sysctl.u.xsplice.u.get.status.rc = 0;
+
+    sysctl.u.xsplice.u.get.name = def_name;
+    set_xen_guest_handle(sysctl.u.xsplice.u.get.name.name, name);
+
+    rc = do_sysctl(xch, &sysctl);
+
+    xc_hypercall_bounce_post(xch, name);
+
+    memcpy(status, &sysctl.u.xsplice.u.get.status, sizeof(*status));
+
+    return rc;
+}
+
+int xc_xsplice_list(xc_interface *xch, unsigned int max, unsigned int start,
+                    xen_xsplice_status_t *info,
+                    char *name, uint32_t *len,
+                    unsigned int *done,
+                    unsigned int *left)
+{
+    int rc;
+    DECLARE_SYSCTL;
+    DECLARE_HYPERCALL_BOUNCE(info, 0 /* adjust later. */, XC_HYPERCALL_BUFFER_BOUNCE_OUT);
+    DECLARE_HYPERCALL_BOUNCE(name, 0 /* adjust later. */, XC_HYPERCALL_BUFFER_BOUNCE_OUT);
+    DECLARE_HYPERCALL_BOUNCE(len, 0 /* adjust later. */, XC_HYPERCALL_BUFFER_BOUNCE_OUT);
+    uint32_t max_batch_sz, nr;
+    uint32_t version = 0, retries = 0;
+    uint32_t adjust = 0;
+
+    if ( !max || !info || !name || !len )
+        return -1;
+
+    sysctl.cmd = XEN_SYSCTL_xsplice_op;
+    sysctl.u.xsplice.cmd = XEN_SYSCTL_XSPLICE_LIST;
+    sysctl.u.xsplice.pad = 0;
+    sysctl.u.xsplice.u.list.version = 0;
+    sysctl.u.xsplice.u.list.idx = start;
+    sysctl.u.xsplice.u.list.pad = 0;
+
+    max_batch_sz = max;
+
+    *done = 0;
+    *left = 0;
+    do {
+        if ( adjust )
+            adjust = 0; /* Used when adjusting the 'max_batch_sz' or 'retries'. */
+
+        nr = min(max - *done, max_batch_sz);
+
+        sysctl.u.xsplice.u.list.nr = nr;
+        /* Fix the size (may vary between hypercalls). */
+        HYPERCALL_BOUNCE_SET_SIZE(info, nr * sizeof(*info));
+        HYPERCALL_BOUNCE_SET_SIZE(name, nr * sizeof(*name) * XEN_XSPLICE_NAME_SIZE);
+        HYPERCALL_BOUNCE_SET_SIZE(len, nr * sizeof(*len));
+        /* Move the pointer to proper offset into 'info'. */
+        (HYPERCALL_BUFFER(info))->ubuf = info + *done;
+        (HYPERCALL_BUFFER(name))->ubuf = name + (sizeof(*name) * XEN_XSPLICE_NAME_SIZE * *done);
+        (HYPERCALL_BUFFER(len))->ubuf = len + *done;
+        /* Allocate memory. */
+        rc = xc_hypercall_bounce_pre(xch, info);
+        if ( rc )
+            return rc;
+
+        rc = xc_hypercall_bounce_pre(xch, name);
+        if ( rc )
+        {
+            xc_hypercall_bounce_post(xch, info);
+            return rc;
+        }
+        rc = xc_hypercall_bounce_pre(xch, len);
+        if ( rc )
+        {
+            xc_hypercall_bounce_post(xch, info);
+            xc_hypercall_bounce_post(xch, name);
+            return rc;
+        }
+        set_xen_guest_handle(sysctl.u.xsplice.u.list.status, info);
+        set_xen_guest_handle(sysctl.u.xsplice.u.list.name, name);
+        set_xen_guest_handle(sysctl.u.xsplice.u.list.len, len);
+
+        rc = do_sysctl(xch, &sysctl);
+        /*
+         * From here on we MUST call xc_hypercall_bounce. If rc < 0 we
+         * end up doing it (outside the loop), so using a break is OK.
+         */
+        if ( rc < 0 && errno == E2BIG )
+        {
+            if ( max_batch_sz <= 1 )
+                break;
+            max_batch_sz >>= 1;
+            adjust = 1; /* For the loop conditional to let us loop again. */
+            /* No memory leaks! */
+            xc_hypercall_bounce_post(xch, info);
+            xc_hypercall_bounce_post(xch, name);
+            xc_hypercall_bounce_post(xch, len);
+            continue;
+        }
+        else if ( rc < 0 ) /* For all other errors we bail out. */
+            break;
+
+        if ( !version )
+            version = sysctl.u.xsplice.u.list.version;
+
+        if ( sysctl.u.xsplice.u.list.version != version )
+        {
+            /* TODO: retries should be configurable? */
+            if ( retries++ > 3 )
+            {
+                rc = -1;
+                errno = EBUSY;
+                break;
+            }
+            *done = 0; /* Retry from scratch. */
+            version = sysctl.u.xsplice.u.list.version;
+            adjust = 1; /* And make sure we continue in the loop. */
+            /* No memory leaks. */
+            xc_hypercall_bounce_post(xch, info);
+            xc_hypercall_bounce_post(xch, name);
+            xc_hypercall_bounce_post(xch, len);
+            continue;
+        }
+
+        /* We should never hit this, but just in case. */
+        if ( rc > nr )
+        {
+            errno = EINVAL; /* Overflow! */
+            rc = -1;
+            break;
+        }
+        *left = sysctl.u.xsplice.u.list.nr; /* Total remaining count. */
+        /* Copy only up 'rc' of data' - we could add 'min(rc,nr) if desired. */
+        HYPERCALL_BOUNCE_SET_SIZE(info, (rc * sizeof(*info)));
+        HYPERCALL_BOUNCE_SET_SIZE(name, (rc * sizeof(*name) * XEN_XSPLICE_NAME_SIZE));
+        HYPERCALL_BOUNCE_SET_SIZE(len, (rc * sizeof(*len)));
+        /* Bounce the data and free the bounce buffer. */
+        xc_hypercall_bounce_post(xch, info);
+        xc_hypercall_bounce_post(xch, name);
+        xc_hypercall_bounce_post(xch, len);
+        /* And update how many elements of info we have copied into. */
+        *done += rc;
+        /* Update idx. */
+        sysctl.u.xsplice.u.list.idx = *done;
+    } while ( adjust || (*done < max && *left != 0) );
+
+    if ( rc < 0 )
+    {
+        xc_hypercall_bounce_post(xch, len);
+        xc_hypercall_bounce_post(xch, name);
+        xc_hypercall_bounce_post(xch, info);
+    }
+
+    return rc > 0 ? 0 : rc;
+}
+
+static int _xc_xsplice_action(xc_interface *xch,
+                              char *name,
+                              unsigned int action,
+                              uint32_t timeout)
+{
+    int rc;
+    DECLARE_SYSCTL;
+    DECLARE_HYPERCALL_BOUNCE(name, 0 /* adjust later */, XC_HYPERCALL_BUFFER_BOUNCE_IN);
+    xen_xsplice_name_t def_name = { .pad = { 0, 0, 0 } };
+
+    def_name.size = strlen(name);
+
+    if ( def_name.size > XEN_XSPLICE_NAME_SIZE )
+        return -1;
+
+    HYPERCALL_BOUNCE_SET_SIZE(name, def_name.size);
+
+    if ( xc_hypercall_bounce_pre(xch, name) )
+        return -1;
+
+    sysctl.cmd = XEN_SYSCTL_xsplice_op;
+    sysctl.u.xsplice.cmd = XEN_SYSCTL_XSPLICE_ACTION;
+    sysctl.u.xsplice.pad = 0;
+    sysctl.u.xsplice.u.action.cmd = action;
+    sysctl.u.xsplice.u.action.timeout = timeout;
+
+    sysctl.u.xsplice.u.action.name = def_name;
+    set_xen_guest_handle(sysctl.u.xsplice.u.action.name.name, name);
+
+    rc = do_sysctl(xch, &sysctl);
+
+    xc_hypercall_bounce_post(xch, name);
+
+    return rc;
+}
+
+int xc_xsplice_apply(xc_interface *xch, char *name, uint32_t timeout)
+{
+    return _xc_xsplice_action(xch, name, XSPLICE_ACTION_APPLY, timeout);
+}
+
+int xc_xsplice_revert(xc_interface *xch, char *name, uint32_t timeout)
+{
+    return _xc_xsplice_action(xch, name, XSPLICE_ACTION_REVERT, timeout);
+}
+
+int xc_xsplice_unload(xc_interface *xch, char *name, uint32_t timeout)
+{
+    return _xc_xsplice_action(xch, name, XSPLICE_ACTION_UNLOAD, timeout);
+}
+
+int xc_xsplice_check(xc_interface *xch, char *name, uint32_t timeout)
+{
+    return _xc_xsplice_action(xch, name, XSPLICE_ACTION_CHECK, timeout);
+}
+
+int xc_xsplice_replace(xc_interface *xch, char *name, uint32_t timeout)
+{
+    return _xc_xsplice_action(xch, name, XSPLICE_ACTION_REPLACE, timeout);
+}
+
 /*
  * Local variables:
  * mode: C
-- 
2.1.0
