From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
To: linux-media@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org
Subject: [PATCH v3 31/35] v4l: vsp1: Add VSP+DU support
Date: Mon, 8 Feb 2016 13:44:01 +0200 [thread overview]
Message-ID: <1454931845-23864-32-git-send-email-laurent.pinchart+renesas@ideasonboard.com> (raw)
In-Reply-To: <1454931845-23864-1-git-send-email-laurent.pinchart+renesas@ideasonboard.com>
Implement internal control of the VSP pipeline to be used by the DU
DRM/KMS driver when using the VSP as an internal composer handled
through DRM/KMS only.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
Changes since v2:
- Make LIF mandatory for VSPD instances
Changes since vsp1-kms-gen2-20150811:
- Support non-RGB formats at the RPF input
- Make BRU mandatory for VSPD instances
- Squash with commits 'v4l: vsp1: Reset the DRM pipeline when stopping
the stream', 'v4l: vsp1: Fix typo' and 'v4l: vsp1: Support disabling
and already disabled RPF'.
---
drivers/media/platform/vsp1/Makefile | 2 +-
drivers/media/platform/vsp1/vsp1.h | 3 +-
drivers/media/platform/vsp1/vsp1_drm.c | 552 +++++++++++++++++++++++++++++++++
drivers/media/platform/vsp1/vsp1_drm.h | 26 ++
drivers/media/platform/vsp1/vsp1_drv.c | 23 +-
include/media/vsp1.h | 30 ++
6 files changed, 625 insertions(+), 11 deletions(-)
create mode 100644 drivers/media/platform/vsp1/vsp1_drm.c
create mode 100644 drivers/media/platform/vsp1/vsp1_drm.h
create mode 100644 include/media/vsp1.h
diff --git a/drivers/media/platform/vsp1/Makefile b/drivers/media/platform/vsp1/Makefile
index 0ef0b5384125..447e72a2ef43 100644
--- a/drivers/media/platform/vsp1/Makefile
+++ b/drivers/media/platform/vsp1/Makefile
@@ -1,5 +1,5 @@
vsp1-y := vsp1_drv.o vsp1_entity.o vsp1_pipe.o
-vsp1-y += vsp1_video.o
+vsp1-y += vsp1_drm.o vsp1_video.o
vsp1-y += vsp1_rpf.o vsp1_rwpf.o vsp1_wpf.o
vsp1-y += vsp1_hsit.o vsp1_lif.o vsp1_lut.o
vsp1-y += vsp1_bru.o vsp1_sru.o vsp1_uds.o
diff --git a/drivers/media/platform/vsp1/vsp1.h b/drivers/media/platform/vsp1/vsp1.h
index 454201bf59ee..67a026ae88cb 100644
--- a/drivers/media/platform/vsp1/vsp1.h
+++ b/drivers/media/platform/vsp1/vsp1.h
@@ -26,6 +26,7 @@
struct clk;
struct device;
+struct vsp1_drm;
struct vsp1_platform_data;
struct vsp1_bru;
struct vsp1_hsit;
@@ -78,8 +79,8 @@ struct vsp1_device {
struct v4l2_device v4l2_dev;
struct media_device media_dev;
-
struct media_entity_operations media_ops;
+ struct vsp1_drm *drm;
};
int vsp1_device_get(struct vsp1_device *vsp1);
diff --git a/drivers/media/platform/vsp1/vsp1_drm.c b/drivers/media/platform/vsp1/vsp1_drm.c
new file mode 100644
index 000000000000..ac81ff10c339
--- /dev/null
+++ b/drivers/media/platform/vsp1/vsp1_drm.c
@@ -0,0 +1,552 @@
+/*
+ * vsp1_drm.c -- R-Car VSP1 DRM API
+ *
+ * Copyright (C) 2015 Renesas Electronics Corporation
+ *
+ * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/vsp1.h>
+
+#include <media/media-entity.h>
+#include <media/v4l2-subdev.h>
+
+#include "vsp1.h"
+#include "vsp1_bru.h"
+#include "vsp1_drm.h"
+#include "vsp1_lif.h"
+#include "vsp1_pipe.h"
+#include "vsp1_rwpf.h"
+
+/* -----------------------------------------------------------------------------
+ * Runtime Handling
+ */
+
+static int vsp1_drm_pipeline_run(struct vsp1_pipeline *pipe)
+{
+ struct vsp1_device *vsp1 = pipe->output->entity.vsp1;
+ int ret;
+
+ if (vsp1->drm->update) {
+ struct vsp1_entity *entity;
+
+ list_for_each_entry(entity, &pipe->entities, list_pipe) {
+ /* Skip unused RPFs. */
+ if (entity->type == VSP1_ENTITY_RPF) {
+ struct vsp1_rwpf *rpf =
+ to_rwpf(&entity->subdev);
+
+ if (!pipe->inputs[rpf->entity.index])
+ continue;
+ }
+
+ vsp1_entity_route_setup(entity);
+
+ ret = v4l2_subdev_call(&entity->subdev, video,
+ s_stream, 1);
+ if (ret < 0) {
+ dev_err(vsp1->dev,
+ "DRM pipeline start failure on entity %s\n",
+ entity->subdev.name);
+ return ret;
+ }
+ }
+
+ vsp1->drm->update = false;
+ }
+
+ vsp1_pipeline_run(pipe);
+
+ return 0;
+}
+
+static void vsp1_drm_pipeline_frame_end(struct vsp1_pipeline *pipe)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&pipe->irqlock, flags);
+ if (pipe->num_inputs)
+ vsp1_drm_pipeline_run(pipe);
+ spin_unlock_irqrestore(&pipe->irqlock, flags);
+}
+
+/* -----------------------------------------------------------------------------
+ * DU Driver API
+ */
+
+int vsp1_du_init(struct device *dev)
+{
+ struct vsp1_device *vsp1 = dev_get_drvdata(dev);
+
+ if (!vsp1)
+ return -EPROBE_DEFER;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(vsp1_du_init);
+
+/**
+ * vsp1_du_setup_lif - Setup the output part of the VSP pipeline
+ * @dev: the VSP device
+ * @width: output frame width in pixels
+ * @height: output frame height in pixels
+ *
+ * Configure the output part of VSP DRM pipeline for the given frame @width and
+ * @height. This sets up formats on the BRU source pad, the WPF0 sink and source
+ * pads, and the LIF sink pad.
+ *
+ * As the media bus code on the BRU source pad is conditioned by the
+ * configuration of the BRU sink 0 pad, we also set up the formats on all BRU
+ * sinks, even if the configuration will be overwritten later by
+ * vsp1_du_setup_rpf(). This ensures that the BRU configuration is set to a well
+ * defined state.
+ *
+ * Return 0 on success or a negative error code on failure.
+ */
+int vsp1_du_setup_lif(struct device *dev, unsigned int width,
+ unsigned int height)
+{
+ struct vsp1_device *vsp1 = dev_get_drvdata(dev);
+ struct vsp1_pipeline *pipe = &vsp1->drm->pipe;
+ struct vsp1_bru *bru = vsp1->bru;
+ struct v4l2_subdev_format format;
+ unsigned int i;
+ int ret;
+
+ dev_dbg(vsp1->dev, "%s: configuring LIF with format %ux%u\n",
+ __func__, width, height);
+
+ if (width == 0 || height == 0) {
+ /* Zero width or height means the CRTC is being disabled, stop
+ * the pipeline and turn the light off.
+ */
+ ret = vsp1_pipeline_stop(pipe);
+ if (ret == -ETIMEDOUT)
+ dev_err(vsp1->dev, "DRM pipeline stop timeout\n");
+
+ media_entity_pipeline_stop(&pipe->output->entity.subdev.entity);
+
+ for (i = 0; i < bru->entity.source_pad; ++i) {
+ bru->inputs[i].rpf = NULL;
+ pipe->inputs[i] = NULL;
+ }
+
+ pipe->num_inputs = 0;
+
+ vsp1_device_put(vsp1);
+
+ dev_dbg(vsp1->dev, "%s: pipeline disabled\n", __func__);
+
+ return 0;
+ }
+
+ /* Configure the format at the BRU sinks and propagate it through the
+ * pipeline.
+ */
+ memset(&format, 0, sizeof(format));
+ format.which = V4L2_SUBDEV_FORMAT_ACTIVE;
+
+ for (i = 0; i < bru->entity.source_pad; ++i) {
+ format.pad = i;
+
+ format.format.width = width;
+ format.format.height = height;
+ format.format.code = MEDIA_BUS_FMT_ARGB8888_1X32;
+ format.format.field = V4L2_FIELD_NONE;
+
+ ret = v4l2_subdev_call(&bru->entity.subdev, pad,
+ set_fmt, NULL, &format);
+ if (ret < 0)
+ return ret;
+
+ dev_dbg(vsp1->dev, "%s: set format %ux%u (%x) on BRU pad %u\n",
+ __func__, format.format.width, format.format.height,
+ format.format.code, i);
+ }
+
+ format.pad = bru->entity.source_pad;
+ format.format.width = width;
+ format.format.height = height;
+ format.format.code = MEDIA_BUS_FMT_ARGB8888_1X32;
+ format.format.field = V4L2_FIELD_NONE;
+
+ ret = v4l2_subdev_call(&bru->entity.subdev, pad, set_fmt, NULL,
+ &format);
+ if (ret < 0)
+ return ret;
+
+ dev_dbg(vsp1->dev, "%s: set format %ux%u (%x) on BRU pad %u\n",
+ __func__, format.format.width, format.format.height,
+ format.format.code, i);
+
+ format.pad = RWPF_PAD_SINK;
+ ret = v4l2_subdev_call(&vsp1->wpf[0]->entity.subdev, pad, set_fmt, NULL,
+ &format);
+ if (ret < 0)
+ return ret;
+
+ dev_dbg(vsp1->dev, "%s: set format %ux%u (%x) on WPF0 sink\n",
+ __func__, format.format.width, format.format.height,
+ format.format.code);
+
+ format.pad = RWPF_PAD_SOURCE;
+ ret = v4l2_subdev_call(&vsp1->wpf[0]->entity.subdev, pad, get_fmt, NULL,
+ &format);
+ if (ret < 0)
+ return ret;
+
+ dev_dbg(vsp1->dev, "%s: got format %ux%u (%x) on WPF0 source\n",
+ __func__, format.format.width, format.format.height,
+ format.format.code);
+
+ format.pad = LIF_PAD_SINK;
+ ret = v4l2_subdev_call(&vsp1->lif->entity.subdev, pad, set_fmt, NULL,
+ &format);
+ if (ret < 0)
+ return ret;
+
+ dev_dbg(vsp1->dev, "%s: set format %ux%u (%x) on LIF sink\n",
+ __func__, format.format.width, format.format.height,
+ format.format.code);
+
+ /* Verify that the format at the output of the pipeline matches the
+ * requested frame size and media bus code.
+ */
+ if (format.format.width != width || format.format.height != height ||
+ format.format.code != MEDIA_BUS_FMT_ARGB8888_1X32) {
+ dev_dbg(vsp1->dev, "%s: format mismatch\n", __func__);
+ return -EPIPE;
+ }
+
+ /* Mark the pipeline as streaming and enable the VSP1. This will store
+ * the pipeline pointer in all entities, which the s_stream handlers
+ * will need. We don't start the entities themselves right at this point
+ * as there's no plane configured yet, so we can't start processing
+ * buffers.
+ */
+ ret = vsp1_device_get(vsp1);
+ if (ret < 0)
+ return ret;
+
+ ret = media_entity_pipeline_start(&pipe->output->entity.subdev.entity,
+ &pipe->pipe);
+ if (ret < 0) {
+ dev_dbg(vsp1->dev, "%s: pipeline start failed\n", __func__);
+ vsp1_device_put(vsp1);
+ return ret;
+ }
+
+ dev_dbg(vsp1->dev, "%s: pipeline enabled\n", __func__);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(vsp1_du_setup_lif);
+
+/**
+ * vsp1_du_setup_rpf - Setup one RPF input of the VSP pipeline
+ * @dev: the VSP device
+ * @rpf_index: index of the RPF to setup (0-based)
+ * @pixelformat: V4L2 pixel format for the RPF memory input
+ * @pitch: number of bytes per line in the image stored in memory
+ * @mem: DMA addresses of the memory buffers (one per plane)
+ * @src: the source crop rectangle for the RPF
+ * @dst: the destination compose rectangle for the BRU input
+ *
+ * Configure the VSP to perform composition of the image referenced by @mem
+ * through RPF @rpf_index, using the @src crop rectangle and the @dst
+ * composition rectangle. The Z-order is fixed with RPF 0 at the bottom.
+ *
+ * Image format as stored in memory is expressed as a V4L2 @pixelformat value.
+ * As a special case, setting the pixel format to 0 will disable the RPF. The
+ * @pitch, @mem, @src and @dst parameters are ignored in that case. Calling the
+ * function on a disabled RPF is allowed.
+ *
+ * The memory pitch is configurable to allow for padding at end of lines, or
+ * simple for images that extend beyond the crop rectangle boundaries. The
+ * @pitch value is expressed in bytes and applies to all planes for multiplanar
+ * formats.
+ *
+ * The source memory buffer is referenced by the DMA address of its planes in
+ * the @mem array. Up to two planes are supported. The second plane DMA address
+ * is ignored for formats using a single plane.
+ *
+ * This function isn't reentrant, the caller needs to serialize calls.
+ *
+ * TODO: Implement Z-order control by decoupling the RPF index from the BRU
+ * input index.
+ *
+ * Return 0 on success or a negative error code on failure.
+ */
+int vsp1_du_setup_rpf(struct device *dev, unsigned int rpf_index,
+ u32 pixelformat, unsigned int pitch,
+ dma_addr_t mem[2], const struct v4l2_rect *src,
+ const struct v4l2_rect *dst)
+{
+ struct vsp1_device *vsp1 = dev_get_drvdata(dev);
+ struct vsp1_pipeline *pipe = &vsp1->drm->pipe;
+ const struct vsp1_format_info *fmtinfo;
+ struct v4l2_subdev_selection sel;
+ struct v4l2_subdev_format format;
+ struct vsp1_rwpf_memory memory;
+ struct vsp1_rwpf *rpf;
+ unsigned long flags;
+ bool start_stop = false;
+ int ret;
+
+ if (rpf_index >= vsp1->pdata.rpf_count)
+ return -EINVAL;
+
+ rpf = vsp1->rpf[rpf_index];
+
+ if (pixelformat == 0) {
+ dev_dbg(vsp1->dev, "%s: RPF%u: disable requested\n", __func__,
+ rpf_index);
+
+ spin_lock_irqsave(&pipe->irqlock, flags);
+
+ if (pipe->inputs[rpf_index]) {
+ /* Remove the RPF from the pipeline if it was previously
+ * enabled.
+ */
+ vsp1->bru->inputs[rpf_index].rpf = NULL;
+ pipe->inputs[rpf_index] = NULL;
+
+ vsp1->drm->update = true;
+ start_stop = --pipe->num_inputs == 0;
+ }
+
+ spin_unlock_irqrestore(&pipe->irqlock, flags);
+
+ /* Stop the pipeline if we're the last user. */
+ if (start_stop)
+ vsp1_pipeline_stop(pipe);
+
+ return 0;
+ }
+
+ dev_dbg(vsp1->dev,
+ "%s: RPF%u: (%u,%u)/%ux%u -> (%u,%u)/%ux%u (%08x), pitch %u dma { %pad, %pad }\n",
+ __func__, rpf_index,
+ src->left, src->top, src->width, src->height,
+ dst->left, dst->top, dst->width, dst->height,
+ pixelformat, pitch, &mem[0], &mem[1]);
+
+ /* Set the stride at the RPF input. */
+ fmtinfo = vsp1_get_format_info(pixelformat);
+ if (!fmtinfo) {
+ dev_dbg(vsp1->dev, "Unsupport pixel format %08x for RPF\n",
+ pixelformat);
+ return -EINVAL;
+ }
+
+ rpf->fmtinfo = fmtinfo;
+ rpf->format.num_planes = fmtinfo->planes;
+ rpf->format.plane_fmt[0].bytesperline = pitch;
+ rpf->format.plane_fmt[1].bytesperline = pitch;
+
+ /* Configure the format on the RPF sink pad and propagate it up to the
+ * BRU sink pad.
+ */
+ memset(&format, 0, sizeof(format));
+ format.which = V4L2_SUBDEV_FORMAT_ACTIVE;
+ format.pad = RWPF_PAD_SINK;
+ format.format.width = src->width + src->left;
+ format.format.height = src->height + src->top;
+ format.format.code = fmtinfo->mbus;
+ format.format.field = V4L2_FIELD_NONE;
+
+ ret = v4l2_subdev_call(&rpf->entity.subdev, pad, set_fmt, NULL,
+ &format);
+ if (ret < 0)
+ return ret;
+
+ dev_dbg(vsp1->dev,
+ "%s: set format %ux%u (%x) on RPF%u sink\n",
+ __func__, format.format.width, format.format.height,
+ format.format.code, rpf->entity.index);
+
+ memset(&sel, 0, sizeof(sel));
+ sel.which = V4L2_SUBDEV_FORMAT_ACTIVE;
+ sel.pad = RWPF_PAD_SINK;
+ sel.target = V4L2_SEL_TGT_CROP;
+ sel.r = *src;
+
+ ret = v4l2_subdev_call(&rpf->entity.subdev, pad, set_selection, NULL,
+ &sel);
+ if (ret < 0)
+ return ret;
+
+ dev_dbg(vsp1->dev,
+ "%s: set selection (%u,%u)/%ux%u on RPF%u sink\n",
+ __func__, sel.r.left, sel.r.top, sel.r.width, sel.r.height,
+ rpf->entity.index);
+
+ /* RPF source, hardcode the format to ARGB8888 to turn on format
+ * conversion if needed.
+ */
+ format.pad = RWPF_PAD_SOURCE;
+
+ ret = v4l2_subdev_call(&rpf->entity.subdev, pad, get_fmt, NULL,
+ &format);
+ if (ret < 0)
+ return ret;
+
+ dev_dbg(vsp1->dev,
+ "%s: got format %ux%u (%x) on RPF%u source\n",
+ __func__, format.format.width, format.format.height,
+ format.format.code, rpf->entity.index);
+
+ format.format.code = MEDIA_BUS_FMT_ARGB8888_1X32;
+
+ ret = v4l2_subdev_call(&rpf->entity.subdev, pad, set_fmt, NULL,
+ &format);
+ if (ret < 0)
+ return ret;
+
+ /* BRU sink, propagate the format from the RPF source. */
+ format.pad = rpf->entity.index;
+
+ ret = v4l2_subdev_call(&vsp1->bru->entity.subdev, pad, set_fmt, NULL,
+ &format);
+ if (ret < 0)
+ return ret;
+
+ dev_dbg(vsp1->dev, "%s: set format %ux%u (%x) on BRU pad %u\n",
+ __func__, format.format.width, format.format.height,
+ format.format.code, format.pad);
+
+ sel.pad = rpf->entity.index;
+ sel.target = V4L2_SEL_TGT_COMPOSE;
+ sel.r = *dst;
+
+ ret = v4l2_subdev_call(&vsp1->bru->entity.subdev, pad, set_selection,
+ NULL, &sel);
+ if (ret < 0)
+ return ret;
+
+ dev_dbg(vsp1->dev,
+ "%s: set selection (%u,%u)/%ux%u on BRU pad %u\n",
+ __func__, sel.r.left, sel.r.top, sel.r.width, sel.r.height,
+ sel.pad);
+
+ /* Store the compose rectangle coordinates in the RPF. */
+ rpf->location.left = dst->left;
+ rpf->location.top = dst->top;
+
+ /* Set the memory buffer address. */
+ memory.num_planes = fmtinfo->planes;
+ memory.addr[0] = mem[0];
+ memory.addr[1] = mem[1];
+
+ rpf->ops->set_memory(rpf, &memory);
+
+ spin_lock_irqsave(&pipe->irqlock, flags);
+
+ /* If the RPF was previously stopped set the BRU input to the RPF and
+ * store the RPF in the pipeline inputs array.
+ */
+ if (!pipe->inputs[rpf->entity.index]) {
+ vsp1->bru->inputs[rpf_index].rpf = rpf;
+ pipe->inputs[rpf->entity.index] = rpf;
+ start_stop = pipe->num_inputs++ == 0;
+ }
+
+ /* Start the pipeline if it's currently stopped. */
+ vsp1->drm->update = true;
+ if (start_stop)
+ vsp1_drm_pipeline_run(pipe);
+
+ spin_unlock_irqrestore(&pipe->irqlock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(vsp1_du_setup_rpf);
+
+/* -----------------------------------------------------------------------------
+ * Initialization
+ */
+
+int vsp1_drm_create_links(struct vsp1_device *vsp1)
+{
+ const u32 flags = MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE;
+ unsigned int i;
+ int ret;
+
+ /* VSPD instances require a BRU to perform composition and a LIF to
+ * output to the DU.
+ */
+ if (!vsp1->bru || !vsp1->lif)
+ return -ENXIO;
+
+ for (i = 0; i < vsp1->pdata.rpf_count; ++i) {
+ struct vsp1_rwpf *rpf = vsp1->rpf[i];
+
+ ret = media_create_pad_link(&rpf->entity.subdev.entity,
+ RWPF_PAD_SOURCE,
+ &vsp1->bru->entity.subdev.entity,
+ i, flags);
+ if (ret < 0)
+ return ret;
+
+ rpf->entity.sink = &vsp1->bru->entity.subdev.entity;
+ rpf->entity.sink_pad = i;
+ }
+
+ ret = media_create_pad_link(&vsp1->bru->entity.subdev.entity,
+ vsp1->bru->entity.source_pad,
+ &vsp1->wpf[0]->entity.subdev.entity,
+ RWPF_PAD_SINK, flags);
+ if (ret < 0)
+ return ret;
+
+ vsp1->bru->entity.sink = &vsp1->wpf[0]->entity.subdev.entity;
+ vsp1->bru->entity.sink_pad = RWPF_PAD_SINK;
+
+ ret = media_create_pad_link(&vsp1->wpf[0]->entity.subdev.entity,
+ RWPF_PAD_SOURCE,
+ &vsp1->lif->entity.subdev.entity,
+ LIF_PAD_SINK, flags);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+int vsp1_drm_init(struct vsp1_device *vsp1)
+{
+ struct vsp1_pipeline *pipe;
+ unsigned int i;
+
+ vsp1->drm = devm_kzalloc(vsp1->dev, sizeof(*vsp1->drm), GFP_KERNEL);
+ if (!vsp1->drm)
+ return -ENOMEM;
+
+ pipe = &vsp1->drm->pipe;
+
+ vsp1_pipeline_init(pipe);
+ pipe->frame_end = vsp1_drm_pipeline_frame_end;
+
+ /* The DRM pipeline is static, add entities manually. */
+ for (i = 0; i < vsp1->pdata.rpf_count; ++i) {
+ struct vsp1_rwpf *input = vsp1->rpf[i];
+
+ list_add_tail(&input->entity.list_pipe, &pipe->entities);
+ }
+
+ list_add_tail(&vsp1->bru->entity.list_pipe, &pipe->entities);
+ list_add_tail(&vsp1->wpf[0]->entity.list_pipe, &pipe->entities);
+ list_add_tail(&vsp1->lif->entity.list_pipe, &pipe->entities);
+
+ pipe->bru = &vsp1->bru->entity;
+ pipe->lif = &vsp1->lif->entity;
+ pipe->output = vsp1->wpf[0];
+
+ return 0;
+}
diff --git a/drivers/media/platform/vsp1/vsp1_drm.h b/drivers/media/platform/vsp1/vsp1_drm.h
new file mode 100644
index 000000000000..2ad320ab1e45
--- /dev/null
+++ b/drivers/media/platform/vsp1/vsp1_drm.h
@@ -0,0 +1,26 @@
+/*
+ * vsp1_drm.h -- R-Car VSP1 DRM/KMS Interface
+ *
+ * Copyright (C) 2015 Renesas Electronics Corporation
+ *
+ * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __VSP1_DRM_H__
+#define __VSP1_DRM_H__
+
+#include "vsp1_pipe.h"
+
+struct vsp1_drm {
+ struct vsp1_pipeline pipe;
+ bool update;
+};
+
+int vsp1_drm_init(struct vsp1_device *vsp1);
+int vsp1_drm_create_links(struct vsp1_device *vsp1);
+
+#endif /* __VSP1_DRM_H__ */
diff --git a/drivers/media/platform/vsp1/vsp1_drv.c b/drivers/media/platform/vsp1/vsp1_drv.c
index 1e10fc4723c5..74b5920e516b 100644
--- a/drivers/media/platform/vsp1/vsp1_drv.c
+++ b/drivers/media/platform/vsp1/vsp1_drv.c
@@ -25,6 +25,7 @@
#include "vsp1.h"
#include "vsp1_bru.h"
+#include "vsp1_drm.h"
#include "vsp1_hsit.h"
#include "vsp1_lif.h"
#include "vsp1_lut.h"
@@ -120,7 +121,7 @@ static int vsp1_create_sink_links(struct vsp1_device *vsp1,
return 0;
}
-static int vsp1_create_links(struct vsp1_device *vsp1)
+static int vsp1_uapi_create_links(struct vsp1_device *vsp1)
{
struct vsp1_entity *entity;
unsigned int i;
@@ -145,9 +146,6 @@ static int vsp1_create_links(struct vsp1_device *vsp1)
return ret;
}
- if (!vsp1->pdata.uapi)
- return 0;
-
for (i = 0; i < vsp1->pdata.rpf_count; ++i) {
struct vsp1_rwpf *rpf = vsp1->rpf[i];
@@ -360,15 +358,22 @@ static int vsp1_create_entities(struct vsp1_device *vsp1)
}
/* Create links. */
- ret = vsp1_create_links(vsp1);
+ if (vsp1->pdata.uapi)
+ ret = vsp1_uapi_create_links(vsp1);
+ else
+ ret = vsp1_drm_create_links(vsp1);
if (ret < 0)
goto done;
- if (vsp1->pdata.uapi) {
+ /* Register subdev nodes if the userspace API is enabled or initialize
+ * the DRM pipeline otherwise.
+ */
+ if (vsp1->pdata.uapi)
ret = v4l2_device_register_subdev_nodes(&vsp1->v4l2_dev);
- if (ret < 0)
- goto done;
- }
+ else
+ ret = vsp1_drm_init(vsp1);
+ if (ret < 0)
+ goto done;
ret = media_device_register(mdev);
diff --git a/include/media/vsp1.h b/include/media/vsp1.h
new file mode 100644
index 000000000000..2c1aea7066be
--- /dev/null
+++ b/include/media/vsp1.h
@@ -0,0 +1,30 @@
+/*
+ * vsp1.h -- R-Car VSP1 API
+ *
+ * Copyright (C) 2015 Renesas Electronics Corporation
+ *
+ * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __MEDIA_VSP1_H__
+#define __MEDIA_VSP1_H__
+
+#include <linux/types.h>
+
+struct device;
+struct v4l2_rect;
+
+int vsp1_du_init(struct device *dev);
+
+int vsp1_du_setup_lif(struct device *dev, unsigned int width,
+ unsigned int height);
+
+int vsp1_du_setup_rpf(struct device *dev, unsigned int rpf, u32 pixelformat,
+ unsigned int pitch, dma_addr_t mem[2],
+ const struct v4l2_rect *src, const struct v4l2_rect *dst);
+
+#endif /* __MEDIA_VSP1_H__ */
--
2.4.10
next prev parent reply other threads:[~2016-02-08 11:44 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-08 11:43 [PATCH v3 00/35] VSP: Add R-Car Gen3 support Laurent Pinchart
2016-02-08 11:43 ` [PATCH v3 01/35] v4l: Add YUV 4:2:2 and YUV 4:4:4 tri-planar non-contiguous formats Laurent Pinchart
2016-02-08 11:43 ` [PATCH v3 02/35] v4l: vsp1: Add tri-planar memory formats support Laurent Pinchart
2016-02-08 11:43 ` [PATCH v3 03/35] v4l: vsp1: Group all link creation code in a single file Laurent Pinchart
2016-02-08 11:43 ` [PATCH v3 04/35] v4l: vsp1: Change the type of the rwpf field in struct vsp1_video Laurent Pinchart
2016-02-08 11:43 ` [PATCH v3 05/35] v4l: vsp1: Store the memory format in struct vsp1_rwpf Laurent Pinchart
2016-02-08 11:43 ` [PATCH v3 06/35] v4l: vsp1: Move video operations to vsp1_rwpf Laurent Pinchart
2016-02-08 11:43 ` [PATCH v3 07/35] v4l: vsp1: Rename vsp1_video_buffer to vsp1_vb2_buffer Laurent Pinchart
2016-02-08 11:43 ` [PATCH v3 08/35] v4l: vsp1: Move video device out of struct vsp1_rwpf Laurent Pinchart
2016-02-08 11:43 ` [PATCH v3 09/35] v4l: vsp1: Make rwpf operations independent of video device Laurent Pinchart
2016-02-08 11:43 ` [PATCH v3 10/35] v4l: vsp1: Support VSP1 instances without any UDS Laurent Pinchart
2016-02-08 11:43 ` [PATCH v3 11/35] v4l: vsp1: Move vsp1_video pointer from vsp1_entity to vsp1_rwpf Laurent Pinchart
2016-02-08 11:43 ` [PATCH v3 12/35] v4l: vsp1: Remove struct vsp1_pipeline num_video field Laurent Pinchart
2016-02-08 11:43 ` [PATCH v3 13/35] v4l: vsp1: Decouple pipeline end of frame processing from vsp1_video Laurent Pinchart
2016-02-08 11:43 ` [PATCH v3 14/35] v4l: vsp1: Split pipeline management code from vsp1_video.c Laurent Pinchart
2016-02-08 11:43 ` [PATCH v3 15/35] v4l: vsp1: Rename video pipeline functions to use vsp1_video prefix Laurent Pinchart
2016-02-08 11:43 ` [PATCH v3 16/35] v4l: vsp1: Extract pipeline initialization code into a function Laurent Pinchart
2016-02-08 11:43 ` [PATCH v3 17/35] v4l: vsp1: Reuse local variable instead of recomputing it Laurent Pinchart
2016-02-08 11:43 ` [PATCH v3 18/35] v4l: vsp1: Extract link creation to separate function Laurent Pinchart
2016-02-08 11:43 ` [PATCH v3 19/35] v4l: vsp1: Document the vsp1_pipeline structure Laurent Pinchart
2016-02-08 11:43 ` [PATCH v3 20/35] v4l: vsp1: Fix typo in VI6_DISP_IRQ_STA_DST register bit name Laurent Pinchart
2016-02-08 11:43 ` [PATCH v3 21/35] v4l: vsp1: Set the SRU CTRL0 register when starting the stream Laurent Pinchart
2016-02-08 11:43 ` [PATCH v3 22/35] v4l: vsp1: Remove unused module read functions Laurent Pinchart
2016-02-08 11:43 ` [PATCH v3 23/35] v4l: vsp1: Move entity route setup function to vsp1_entity.c Laurent Pinchart
2016-02-08 11:43 ` [PATCH v3 24/35] v4l: vsp1: Make number of BRU inputs configurable Laurent Pinchart
2016-02-08 11:43 ` [PATCH v3 25/35] v4l: vsp1: Make the BRU optional Laurent Pinchart
2016-02-08 11:43 ` [PATCH v3 26/35] v4l: vsp1: Move format info to vsp1_pipe.c Laurent Pinchart
2016-02-08 11:43 ` [PATCH v3 27/35] v4l: vsp1: Make the userspace API optional Laurent Pinchart
2016-02-08 11:43 ` [PATCH v3 28/35] v4l: vsp1: Make pipeline inputs array index by RPF index Laurent Pinchart
2016-02-08 11:43 ` [PATCH v3 29/35] v4l: vsp1: Set the alpha value manually in RPF and WPF s_stream handlers Laurent Pinchart
2016-02-08 11:44 ` [PATCH v3 30/35] v4l: vsp1: Don't validate links when the userspace API is disabled Laurent Pinchart
2016-02-08 11:44 ` Laurent Pinchart [this message]
2016-02-08 11:44 ` [PATCH v3 32/35] v4l: vsp1: Disconnect unused RPFs from the DRM pipeline Laurent Pinchart
2016-02-08 11:44 ` [PATCH v3 33/35] v4l: vsp1: Implement atomic update for the DRM driver Laurent Pinchart
2016-02-08 11:44 ` [PATCH v3 34/35] v4l: vsp1: Add support for the R-Car Gen3 VSP2 Laurent Pinchart
2016-02-08 11:44 ` [PATCH v3 35/35] v4l: vsp1: Add display list support Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1454931845-23864-32-git-send-email-laurent.pinchart+renesas@ideasonboard.com \
--to=laurent.pinchart+renesas@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.