All of lore.kernel.org
 help / color / mirror / Atom feed
From: Wolfram Sang <wsa@the-dreams.de>
To: linux-renesas-soc@vger.kernel.org
Cc: linux-mmc@vger.kernel.org,
	Ben Hutchings <ben.hutchings@codethink.co.uk>,
	Dirk Behme <dirk.behme@gmail.com>,
	Wolfram Sang <wsa@the-dreams.de>
Subject: [RFC 0/7] r8a7790: add UHS-I (SDR50) support to Lager
Date: Fri, 19 Feb 2016 21:16:36 +0100	[thread overview]
Message-ID: <1455913003-6140-1-git-send-email-wsa@the-dreams.de> (raw)

So, I rebased and updated the series from Ben to latest renesas-driver and made
it run on my Lager board. I verified that the voltage switching was done. The
transfer speed of my UHS-I card went from 10 MB/s up to 29 MB/s which is the
upper limit of this card. Will try a faster one next week.

The SDHI patches only needed slight modifications due to the rebase. The PFC
patch needed some more rework, but luckily things have gotten easier since back
then, because we can reuse new macros added for bias support. There is one
question regarding this patch, see the comment there. This question is the
reason why the series is RFC because I'd like to hear your opinions there.

Regarding the MMC subsystem, I'd like to ask if it is okay to name the second
pinctrl binding (for uhs) simply "1v8". Is this name driver specific or shall
we aim for a generic name which is used amongst all drivers?

Thanks and happy hacking,

   Wolfram


Ben Hutchings (6):
  mmc: tmio, sh_mobile_sdhi: Pass tmio_mmc_host ptr to clk_{enable,disable} ops
  mmc: tmio, sh_mobile_sdhi: Add support for variable input clock frequency
  mmc: tmio: Add UHS-I mode support
  mmc: sh_mobile_sdhi: Add UHS-I mode support
  ARM: shmobile: r8a7790: Set maximum frequencies for SDHI clocks
  ARM: shmobile: r8a7790: lager: Enable UHS-I SDR-50

Wolfram Sang (1):
  pinctrl: sh-pfc: r8a7790: Implement voltage switching for SDHI

 arch/arm/boot/dts/r8a7790-lager.dts  |  22 ++++++-
 arch/arm/boot/dts/r8a7790.dtsi       |   4 ++
 drivers/mmc/host/sh_mobile_sdhi.c    | 123 ++++++++++++++++++++++++++++++++---
 drivers/mmc/host/tmio_mmc.h          |   9 ++-
 drivers/mmc/host/tmio_mmc_pio.c      |  57 +++++++++++-----
 drivers/pinctrl/sh-pfc/core.c        |   2 +-
 drivers/pinctrl/sh-pfc/core.h        |   1 +
 drivers/pinctrl/sh-pfc/pfc-r8a7790.c |  60 ++++++++++++++++-
 8 files changed, 249 insertions(+), 29 deletions(-)

-- 
2.7.0


             reply	other threads:[~2016-02-19 20:17 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-19 20:16 Wolfram Sang [this message]
2016-02-19 20:16 ` [RFC 1/7] pinctrl: sh-pfc: r8a7790: Implement voltage switching for SDHI Wolfram Sang
2016-02-29 10:53   ` Geert Uytterhoeven
2016-02-29 11:37     ` Wolfram Sang
2016-03-01 13:42     ` Wolfram Sang
2016-02-19 20:16 ` [RFC 2/7] mmc: tmio, sh_mobile_sdhi: Pass tmio_mmc_host ptr to clk_{enable,disable} ops Wolfram Sang
2016-02-19 20:16 ` [RFC 3/7] mmc: tmio, sh_mobile_sdhi: Add support for variable input clock frequency Wolfram Sang
2016-02-19 20:16 ` [RFC 4/7] mmc: tmio: Add UHS-I mode support Wolfram Sang
2016-03-03 14:41   ` Ulf Hansson
2016-03-06 15:25     ` Wolfram Sang
2016-03-09 16:17     ` Wolfram Sang
2016-03-16  8:58       ` Ulf Hansson
2016-03-22 17:21         ` Wolfram Sang
2016-02-19 20:16 ` [RFC 5/7] mmc: sh_mobile_sdhi: " Wolfram Sang
2016-03-03 14:47   ` Ulf Hansson
2016-03-09 16:20     ` Wolfram Sang
2016-02-19 20:16 ` [RFC 6/7] ARM: shmobile: r8a7790: Set maximum frequencies for SDHI clocks Wolfram Sang
2016-02-19 20:16 ` [RFC 7/7] ARM: shmobile: r8a7790: lager: Enable UHS-I SDR-50 Wolfram Sang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1455913003-6140-1-git-send-email-wsa@the-dreams.de \
    --to=wsa@the-dreams.de \
    --cc=ben.hutchings@codethink.co.uk \
    --cc=dirk.behme@gmail.com \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.