[PATCH v15 5/8] clk: mediatek: make dpi0_sel propagate rate changes

From: Philipp Zabel <p.zabel@pengutronix.de>
To: dri-devel@lists.freedesktop.org
Cc: Mark Rutland <mark.rutland@arm.com>,
	Stephen Boyd <sboyd@codeaurora.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Jie Qiu <jie.qiu@mediatek.com>,
	Cawa Cheng <cawa.cheng@mediatek.com>,
	YT Shen <yt.shen@mediatek.com>,
	Yingjoe Chen <yingjoe.chen@mediatek.com>,
	devicetree@vger.kernel.org, Jitao Shi <jitao.shi@mediatek.com>,
	kernel@pengutronix.de, Pawel Moll <pawel.moll@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Rob Herring <robh+dt@kernel.org>,
	linux-mediatek@lists.infradead.org,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Paul Bolle <pebolle@tiscali.nl>,
	Emil Velikov <emil.l.velikov@gmail.com>,
	Tomasz Figa <tfiga@chromium.org>,
	Kumar Gala <galak@codeaurora.org>
Subject: [PATCH v15 5/8] clk: mediatek: make dpi0_sel propagate rate changes
Date: Wed, 27 Apr 2016 17:05:49 +0200	[thread overview]
Message-ID: <1461769552-2752-6-git-send-email-p.zabel@pengutronix.de> (raw)
In-Reply-To: <1461769552-2752-1-git-send-email-p.zabel@pengutronix.de>

This mux is supposed to select a fitting divider after the PLL
is already set to the correct rate.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: James Liao <jamesjj.liao@mediatek.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/mediatek/clk-mt8173.c |  6 +++++-
 drivers/clk/mediatek/clk-mtk.h    | 15 +++++++++++++--
 2 files changed, 18 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/mediatek/clk-mt8173.c b/drivers/clk/mediatek/clk-mt8173.c
index 227e356..85c0bfc 100644
--- a/drivers/clk/mediatek/clk-mt8173.c
+++ b/drivers/clk/mediatek/clk-mt8173.c
@@ -558,7 +558,11 @@ static const struct mtk_composite top_muxes[] __initconst = {
 	MUX_GATE(CLK_TOP_ATB_SEL, "atb_sel", atb_parents, 0x0090, 16, 2, 23),
 	MUX_GATE(CLK_TOP_VENC_LT_SEL, "venclt_sel", venc_lt_parents, 0x0090, 24, 4, 31),
 	/* CLK_CFG_6 */
-	MUX_GATE(CLK_TOP_DPI0_SEL, "dpi0_sel", dpi0_parents, 0x00a0, 0, 3, 7),
+	/*
+	 * The dpi0_sel clock should not propagate rate changes to its parent
+	 * clock so the dpi driver can have full control over PLL and divider.
+	 */
+	MUX_GATE_FLAGS(CLK_TOP_DPI0_SEL, "dpi0_sel", dpi0_parents, 0x00a0, 0, 3, 7, 0),
 	MUX_GATE(CLK_TOP_IRDA_SEL, "irda_sel", irda_parents, 0x00a0, 8, 2, 15),
 	MUX_GATE(CLK_TOP_CCI400_SEL, "cci400_sel", cci400_parents, 0x00a0, 16, 3, 23),
 	MUX_GATE(CLK_TOP_AUD_1_SEL, "aud_1_sel", aud_1_parents, 0x00a0, 24, 2, 31),
diff --git a/drivers/clk/mediatek/clk-mtk.h b/drivers/clk/mediatek/clk-mtk.h
index 32d2e45..9f24fcf 100644
--- a/drivers/clk/mediatek/clk-mtk.h
+++ b/drivers/clk/mediatek/clk-mtk.h
@@ -83,7 +83,11 @@ struct mtk_composite {
 	signed char num_parents;
 };
 
-#define MUX_GATE(_id, _name, _parents, _reg, _shift, _width, _gate) {	\
+/*
+ * In case the rate change propagation to parent clocks is undesirable,
+ * this macro allows to specify the clock flags manually.
+ */
+#define MUX_GATE_FLAGS(_id, _name, _parents, _reg, _shift, _width, _gate, _flags) {	\
 		.id = _id,						\
 		.name = _name,						\
 		.mux_reg = _reg,					\
@@ -94,9 +98,16 @@ struct mtk_composite {
 		.divider_shift = -1,					\
 		.parent_names = _parents,				\
 		.num_parents = ARRAY_SIZE(_parents),			\
-		.flags = CLK_SET_RATE_PARENT,				\
+		.flags = _flags,					\
 	}
 
+/*
+ * Unless necessary, all MUX_GATE clocks propagate rate changes to their
+ * parent clock by default.
+ */
+#define MUX_GATE(_id, _name, _parents, _reg, _shift, _width, _gate)	\
+	MUX_GATE_FLAGS(_id, _name, _parents, _reg, _shift, _width, _gate, CLK_SET_RATE_PARENT)
+
 #define MUX(_id, _name, _parents, _reg, _shift, _width) {		\
 		.id = _id,						\
 		.name = _name,						\
-- 
2.8.0.rc3

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
