From: ville.syrjala@linux.intel.com
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH 04/12] drm/i915: Unify intel_pipe_has_type() and intel_pipe_will_have_type()
Date: Wed, 8 Jun 2016 13:41:39 +0300 [thread overview]
Message-ID: <1465382507-23085-5-git-send-email-ville.syrjala@linux.intel.com> (raw)
In-Reply-To: <1465382507-23085-1-git-send-email-ville.syrjala@linux.intel.com>
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
With the introduction of the output_types mask, intel_pipe_has_type()
and intel_pipe_will_have_type() are basically the same thing. Replace
them with a new intel_crtc_has_type() (identical to
intel_pipe_will_have_type() actually).
v2: Rebase
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
drivers/gpu/drm/i915/intel_audio.c | 12 +++---
drivers/gpu/drm/i915/intel_display.c | 84 ++++++++++++++++--------------------
drivers/gpu/drm/i915/intel_drv.h | 3 +-
3 files changed, 44 insertions(+), 55 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c
index b9329c2a670a..da49d6cead9e 100644
--- a/drivers/gpu/drm/i915/intel_audio.c
+++ b/drivers/gpu/drm/i915/intel_audio.c
@@ -154,7 +154,7 @@ static bool audio_rate_need_prog(struct intel_crtc *crtc,
{
if (((mode->clock == TMDS_297M) ||
(mode->clock == TMDS_296M)) &&
- intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI))
+ intel_crtc_has_type(crtc->config, INTEL_OUTPUT_HDMI))
return true;
else
return false;
@@ -262,7 +262,7 @@ static void hsw_audio_codec_disable(struct intel_encoder *encoder)
tmp |= AUD_CONFIG_N_PROG_ENABLE;
tmp &= ~AUD_CONFIG_UPPER_N_MASK;
tmp &= ~AUD_CONFIG_LOWER_N_MASK;
- if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DISPLAYPORT))
+ if (intel_crtc_has_type(intel_crtc->config, INTEL_OUTPUT_DISPLAYPORT))
tmp |= AUD_CONFIG_N_VALUE_INDEX;
I915_WRITE(HSW_AUD_CFG(pipe), tmp);
@@ -328,7 +328,7 @@ static void hsw_audio_codec_enable(struct drm_connector *connector,
tmp = I915_READ(HSW_AUD_CFG(pipe));
tmp &= ~AUD_CONFIG_N_VALUE_INDEX;
tmp &= ~AUD_CONFIG_PIXEL_CLOCK_HDMI_MASK;
- if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DISPLAYPORT))
+ if (intel_crtc_has_type(intel_crtc->config, INTEL_OUTPUT_DISPLAYPORT))
tmp |= AUD_CONFIG_N_VALUE_INDEX;
else
tmp |= audio_config_hdmi_pixel_clock(adjusted_mode);
@@ -389,7 +389,7 @@ static void ilk_audio_codec_disable(struct intel_encoder *encoder)
tmp |= AUD_CONFIG_N_PROG_ENABLE;
tmp &= ~AUD_CONFIG_UPPER_N_MASK;
tmp &= ~AUD_CONFIG_LOWER_N_MASK;
- if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DISPLAYPORT))
+ if (intel_crtc_has_type(intel_crtc->config, INTEL_OUTPUT_DISPLAYPORT))
tmp |= AUD_CONFIG_N_VALUE_INDEX;
I915_WRITE(aud_config, tmp);
@@ -475,7 +475,7 @@ static void ilk_audio_codec_enable(struct drm_connector *connector,
tmp &= ~AUD_CONFIG_N_VALUE_INDEX;
tmp &= ~AUD_CONFIG_N_PROG_ENABLE;
tmp &= ~AUD_CONFIG_PIXEL_CLOCK_HDMI_MASK;
- if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DISPLAYPORT))
+ if (intel_crtc_has_type(intel_crtc->config, INTEL_OUTPUT_DISPLAYPORT))
tmp |= AUD_CONFIG_N_VALUE_INDEX;
else
tmp |= audio_config_hdmi_pixel_clock(adjusted_mode);
@@ -513,7 +513,7 @@ void intel_audio_codec_enable(struct intel_encoder *intel_encoder)
/* ELD Conn_Type */
connector->eld[5] &= ~(3 << 2);
- if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT))
+ if (intel_crtc_has_type(crtc->config, INTEL_OUTPUT_DISPLAYPORT))
connector->eld[5] |= (1 << 2);
connector->eld[6] = drm_av_sync_delay(connector, adjusted_mode) / 2;
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index eabace447b1c..20d6c31635b3 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -530,22 +530,9 @@ needs_modeset(struct drm_crtc_state *state)
return drm_atomic_crtc_needs_modeset(state);
}
-/**
- * Returns whether any output on the specified pipe is of the specified type
- */
-bool intel_pipe_has_type(struct intel_crtc *crtc, enum intel_output_type type)
-{
- return crtc->config->output_types & (1 << type);
-}
-
-/**
- * Returns whether any output on the specified pipe will have the specified
- * type after a staged modeset is complete, i.e., the same as
- * intel_pipe_has_type() but looking at encoder->new_crtc instead of
- * encoder->crtc.
- */
-static bool intel_pipe_will_have_type(const struct intel_crtc_state *crtc_state,
- enum intel_output_type type)
+/* Returns whether any output on the specified pipe is of the specified type */
+bool intel_crtc_has_type(const struct intel_crtc_state *crtc_state,
+ enum intel_output_type type)
{
return crtc_state->output_types & (1 << type);
}
@@ -662,7 +649,7 @@ i9xx_select_p2_div(const struct intel_limit *limit,
{
struct drm_device *dev = crtc_state->base.crtc->dev;
- if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
+ if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
/*
* For LVDS just rely on its current settings for dual-channel.
* We haven't figured out how to reliably set up different
@@ -1613,9 +1600,10 @@ static int intel_num_dvo_pipes(struct drm_device *dev)
struct intel_crtc *crtc;
int count = 0;
- for_each_intel_crtc(dev, crtc)
+ for_each_intel_crtc(dev, crtc) {
count += crtc->base.state->active &&
- intel_pipe_has_type(crtc, INTEL_OUTPUT_DVO);
+ intel_crtc_has_type(crtc->config, INTEL_OUTPUT_DVO);
+ }
return count;
}
@@ -1700,7 +1688,7 @@ static void i9xx_disable_pll(struct intel_crtc *crtc)
/* Disable DVO 2x clock on both PLLs if necessary */
if (IS_I830(dev) &&
- intel_pipe_has_type(crtc, INTEL_OUTPUT_DVO) &&
+ intel_crtc_has_type(crtc->config, INTEL_OUTPUT_DVO) &&
!intel_num_dvo_pipes(dev)) {
I915_WRITE(DPLL(PIPE_B),
I915_READ(DPLL(PIPE_B)) & ~DPLL_DVO_2X_MODE);
@@ -1828,7 +1816,7 @@ static void ironlake_enable_pch_transcoder(struct drm_i915_private *dev_priv,
* here for both 8bpc and 12bpc.
*/
val &= ~PIPECONF_BPC_MASK;
- if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_HDMI))
+ if (intel_crtc_has_type(intel_crtc->config, INTEL_OUTPUT_HDMI))
val |= PIPECONF_8BPC;
else
val |= pipeconf_val & PIPECONF_BPC_MASK;
@@ -1837,7 +1825,7 @@ static void ironlake_enable_pch_transcoder(struct drm_i915_private *dev_priv,
val &= ~TRANS_INTERLACE_MASK;
if ((pipeconf_val & PIPECONF_INTERLACE_MASK) == PIPECONF_INTERLACED_ILK)
if (HAS_PCH_IBX(dev_priv) &&
- intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_SDVO))
+ intel_crtc_has_type(intel_crtc->config, INTEL_OUTPUT_SDVO))
val |= TRANS_LEGACY_INTERLACED_ILK;
else
val |= TRANS_INTERLACED;
@@ -6630,7 +6618,7 @@ static int intel_crtc_compute_config(struct intel_crtc *crtc,
* - LVDS dual channel mode
* - Double wide pipe
*/
- if ((intel_pipe_will_have_type(pipe_config, INTEL_OUTPUT_LVDS) &&
+ if ((intel_crtc_has_type(pipe_config, INTEL_OUTPUT_LVDS) &&
intel_is_dual_link_lvds(dev)) || pipe_config->double_wide)
pipe_config->pipe_src_w &= ~1;
@@ -7141,7 +7129,7 @@ static void i9xx_update_pll_dividers(struct intel_crtc *crtc,
crtc_state->dpll_hw_state.fp0 = fp;
crtc->lowfreq_avail = false;
- if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS) &&
+ if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS) &&
reduced_clock) {
crtc_state->dpll_hw_state.fp1 = fp2;
crtc->lowfreq_avail = true;
@@ -7347,8 +7335,8 @@ static void vlv_prepare_pll(struct intel_crtc *crtc,
/* Set HBR and RBR LPF coefficients */
if (pipe_config->port_clock == 162000 ||
- intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG) ||
- intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI))
+ intel_crtc_has_type(crtc->config, INTEL_OUTPUT_ANALOG) ||
+ intel_crtc_has_type(crtc->config, INTEL_OUTPUT_HDMI))
vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe),
0x009f0003);
else
@@ -7375,8 +7363,8 @@ static void vlv_prepare_pll(struct intel_crtc *crtc,
coreclk = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW7(pipe));
coreclk = (coreclk & 0x0000ff00) | 0x01c00000;
- if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
- intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))
+ if (intel_crtc_has_type(crtc->config, INTEL_OUTPUT_DISPLAYPORT) ||
+ intel_crtc_has_type(crtc->config, INTEL_OUTPUT_EDP))
coreclk |= 0x01000000;
vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW7(pipe), coreclk);
@@ -7557,12 +7545,12 @@ static void i9xx_compute_dpll(struct intel_crtc *crtc,
i9xx_update_pll_dividers(crtc, crtc_state, reduced_clock);
- is_sdvo = intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_SDVO) ||
- intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_HDMI);
+ is_sdvo = intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO) ||
+ intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI);
dpll = DPLL_VGA_MODE_DIS;
- if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS))
+ if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS))
dpll |= DPLLB_MODE_LVDS;
else
dpll |= DPLLB_MODE_DAC_SERIAL;
@@ -7605,7 +7593,7 @@ static void i9xx_compute_dpll(struct intel_crtc *crtc,
if (crtc_state->sdvo_tv_clock)
dpll |= PLL_REF_INPUT_TVCLKINBC;
- else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS) &&
+ else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS) &&
intel_panel_use_ssc(dev_priv))
dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
else
@@ -7634,7 +7622,7 @@ static void i8xx_compute_dpll(struct intel_crtc *crtc,
dpll = DPLL_VGA_MODE_DIS;
- if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
+ if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
} else {
if (clock->p1 == 2)
@@ -7645,10 +7633,10 @@ static void i8xx_compute_dpll(struct intel_crtc *crtc,
dpll |= PLL_P2_DIVIDE_BY_4;
}
- if (!IS_I830(dev) && intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_DVO))
+ if (!IS_I830(dev) && intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DVO))
dpll |= DPLL_DVO_2X_MODE;
- if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS) &&
+ if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS) &&
intel_panel_use_ssc(dev_priv))
dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
else
@@ -7678,7 +7666,7 @@ static void intel_set_pipe_timings(struct intel_crtc *intel_crtc)
crtc_vtotal -= 1;
crtc_vblank_end -= 1;
- if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_SDVO))
+ if (intel_crtc_has_type(intel_crtc->config, INTEL_OUTPUT_SDVO))
vsyncshift = (adjusted_mode->crtc_htotal - 1) / 2;
else
vsyncshift = adjusted_mode->crtc_hsync_start -
@@ -7857,7 +7845,7 @@ static void i9xx_set_pipeconf(struct intel_crtc *intel_crtc)
if (intel_crtc->config->base.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE) {
if (INTEL_INFO(dev)->gen < 4 ||
- intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_SDVO))
+ intel_crtc_has_type(intel_crtc->config, INTEL_OUTPUT_SDVO))
pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
else
pipeconf |= PIPECONF_INTERLACE_W_SYNC_SHIFT;
@@ -7883,14 +7871,14 @@ static int i8xx_crtc_compute_clock(struct intel_crtc *crtc,
memset(&crtc_state->dpll_hw_state, 0,
sizeof(crtc_state->dpll_hw_state));
- if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
+ if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
if (intel_panel_use_ssc(dev_priv)) {
refclk = dev_priv->vbt.lvds_ssc_freq;
DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", refclk);
}
limit = &intel_limits_i8xx_lvds;
- } else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_DVO)) {
+ } else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DVO)) {
limit = &intel_limits_i8xx_dvo;
} else {
limit = &intel_limits_i8xx_dac;
@@ -7919,7 +7907,7 @@ static int g4x_crtc_compute_clock(struct intel_crtc *crtc,
memset(&crtc_state->dpll_hw_state, 0,
sizeof(crtc_state->dpll_hw_state));
- if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
+ if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
if (intel_panel_use_ssc(dev_priv)) {
refclk = dev_priv->vbt.lvds_ssc_freq;
DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", refclk);
@@ -7929,10 +7917,10 @@ static int g4x_crtc_compute_clock(struct intel_crtc *crtc,
limit = &intel_limits_g4x_dual_channel_lvds;
else
limit = &intel_limits_g4x_single_channel_lvds;
- } else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_HDMI) ||
- intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_ANALOG)) {
+ } else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI) ||
+ intel_crtc_has_type(crtc_state, INTEL_OUTPUT_ANALOG)) {
limit = &intel_limits_g4x_hdmi;
- } else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_SDVO)) {
+ } else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO)) {
limit = &intel_limits_g4x_sdvo;
} else {
/* The option is for other outputs */
@@ -7962,7 +7950,7 @@ static int pnv_crtc_compute_clock(struct intel_crtc *crtc,
memset(&crtc_state->dpll_hw_state, 0,
sizeof(crtc_state->dpll_hw_state));
- if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
+ if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
if (intel_panel_use_ssc(dev_priv)) {
refclk = dev_priv->vbt.lvds_ssc_freq;
DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", refclk);
@@ -7996,7 +7984,7 @@ static int i9xx_crtc_compute_clock(struct intel_crtc *crtc,
memset(&crtc_state->dpll_hw_state, 0,
sizeof(crtc_state->dpll_hw_state));
- if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
+ if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
if (intel_panel_use_ssc(dev_priv)) {
refclk = dev_priv->vbt.lvds_ssc_freq;
DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", refclk);
@@ -9000,7 +8988,7 @@ static int ironlake_crtc_compute_clock(struct intel_crtc *crtc,
if (!crtc_state->has_pch_encoder)
return 0;
- if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
+ if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
if (intel_panel_use_ssc(dev_priv)) {
DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n",
dev_priv->vbt.lvds_ssc_freq);
@@ -9039,7 +9027,7 @@ static int ironlake_crtc_compute_clock(struct intel_crtc *crtc,
return -EINVAL;
}
- if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS) &&
+ if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS) &&
has_reduced_clock)
crtc->lowfreq_avail = true;
@@ -13249,7 +13237,7 @@ static void update_scanline_offset(struct intel_crtc *crtc)
crtc->scanline_offset = vtotal - 1;
} else if (HAS_DDI(dev) &&
- intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI)) {
+ intel_crtc_has_type(crtc->config, INTEL_OUTPUT_HDMI)) {
crtc->scanline_offset = 2;
} else
crtc->scanline_offset = 1;
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 3dae05e6d95b..ed5c708858cd 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1167,7 +1167,8 @@ int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
struct drm_file *file_priv);
enum transcoder intel_pipe_to_cpu_transcoder(struct drm_i915_private *dev_priv,
enum pipe pipe);
-bool intel_pipe_has_type(struct intel_crtc *crtc, enum intel_output_type type);
+bool intel_crtc_has_type(const struct intel_crtc_state *crtc_state,
+ enum intel_output_type type);
static inline void
intel_wait_for_vblank(struct drm_device *dev, int pipe)
{
--
2.7.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2016-06-08 10:42 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-08 10:41 [PATCH 00/12] drm/i915: Eliminate DDI encoder->type frobbery ville.syrjala
2016-06-08 10:41 ` [PATCH 01/12] drm/i915: Don't mark eDP encoders as MST capable ville.syrjala
2016-06-16 12:27 ` Sharma, Shashank
2016-06-16 20:35 ` Dave Airlie
2016-06-17 14:25 ` Ville Syrjälä
2016-06-08 10:41 ` [PATCH 02/12] drm/i915: Remove encoder type checks from MST suspend/resume ville.syrjala
2016-06-16 12:41 ` Sharma, Shashank
2016-06-16 13:40 ` Ville Syrjälä
2016-06-16 17:48 ` Sharma, Shashank
2016-06-08 10:41 ` [PATCH 03/12] drm/i915: Add output_types bitmask into the crtc state ville.syrjala
2016-06-08 13:25 ` Chris Wilson
2016-06-08 13:33 ` Ville Syrjälä
2016-06-13 14:25 ` Daniel Vetter
2016-06-13 16:24 ` Ville Syrjälä
2016-06-08 10:41 ` ville.syrjala [this message]
2016-06-08 10:41 ` [PATCH 05/12] drm/i915: Replace manual lvds and sdvo/hdmi counting with intel_crtc_has_type() ville.syrjala
2016-06-08 10:41 ` [PATCH 06/12] drm/i915: Kill has_dp_encoder from pipe_config ville.syrjala
2016-06-08 10:41 ` [PATCH 07/12] drm/i915: Replace some open coded intel_crtc_has_dp_encoder()s ville.syrjala
2016-06-08 10:41 ` [PATCH 08/12] drm/i915: s/INTEL_OUTPUT_DISPLAYPORT/INTEL_OUTPUT_DP/ ville.syrjala
2016-06-08 13:05 ` Kahola, Mika
2016-06-08 10:41 ` [PATCH 09/12] drm/i915: Kill has_dsi_encoder ville.syrjala
2016-06-08 10:41 ` [PATCH 10/12] drm/i915: Simplify hdmi_12bpc_possible() ville.syrjala
2016-06-08 10:41 ` [PATCH 11/12] drm/i915: Check for invalid cloning earlier during modeset ville.syrjala
2016-06-08 13:15 ` Chris Wilson
2016-06-08 13:27 ` Ville Syrjälä
2016-06-20 13:54 ` Maarten Lankhorst
2016-06-08 10:41 ` [PATCH 12/12] drm/i915: Stop frobbing with DDI encoder->type ville.syrjala
2016-06-08 11:13 ` ✓ Ro.CI.BAT: success for drm/i915: Eliminate DDI encoder->type frobbery Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1465382507-23085-5-git-send-email-ville.syrjala@linux.intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.