From: Javier Martinez Canillas <javier@osg.samsung.com>
To: linux-kernel@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>,
Rob Herring <robh+dt@kernel.org>,
Tony Lindgren <tony@atomide.com>,
linux-omap@vger.kernel.org,
Javier Martinez Canillas <javier@osg.samsung.com>,
Enric Balletbo i Serra <enric.balletbo@collabora.com>
Subject: [PATCH 00/23] ARM: dts: omap: Remove skeleton.dtsi usage and fix memory node DTC warning"
Date: Wed, 31 Aug 2016 12:35:14 +0200 [thread overview]
Message-ID: <1472639737-17586-1-git-send-email-javier@osg.samsung.com> (raw)
Hello Tony,
This series removes the usage of the skeleton.dtsi in all the OMAP dts,
which allows to get rid of the DTC warnings about a mismatch between the
memory nodes unit names and reg properties.
Patches are pretty trivial and shouldn't cause functional changes AFAIK,
but have been only built tested.
Best regards,
Javier
Javier Martinez Canillas (23):
ARM: am335x: Add missing memory node in sl50 board
ARM: omap3: Add missing memory node in overo and torpedo boards
ARM: dts: omap2: Remove skeleton.dtsi usage
ARM: dts: omap3: Remove skeleton.dtsi usage
ARM: dts: omap4: Remove skeleton.dtsi usage
ARM: dts: omap5: Remove skeleton.dtsi usage
ARM: dts: am33xx: Remove skeleton.dtsi usage
ARM: dts: dm814x: Remove skeleton.dtsi usage
ARM: dts: dm816x: Remove skeleton.dtsi usage
ARM: dts: dra7: Remove skeleton.dtsi usage
ARM: dts: am4372: Remove skeleton.dtsi usage
ARM: dts: omap2: Add missing unit name to memory nodes
ARM: dts: omap3: Add missing unit name to memory nodes
ARM: dts: omap4: Add missing unit name to memory nodes
ARM: dts: omap5: Add missing unit name to memory nodes
ARM: dts: am335x: Add missing unit name to memory nodes
ARM: dts: am3517: Add missing unit name to memory nodes
ARM: dts: am4372: Add missing unit name to memory nodes
ARM: dts: am572x: Add missing unit name to memory nodes
ARM: dts: dm8148: Add missing unit name to memory nodes
ARM: dts: dm8168: Add missing unit name to memory nodes
ARM: dts: dra62x: Add missing unit name to memory nodes
ARM: dts: dra7: Add missing unit name to memory nodes
arch/arm/boot/dts/am335x-baltos.dtsi | 2 +-
arch/arm/boot/dts/am335x-bone-common.dtsi | 2 +-
arch/arm/boot/dts/am335x-chilisom.dtsi | 2 +-
arch/arm/boot/dts/am335x-cm-t335.dts | 2 +-
arch/arm/boot/dts/am335x-evm.dts | 2 +-
arch/arm/boot/dts/am335x-evmsk.dts | 2 +-
arch/arm/boot/dts/am335x-icev2.dts | 2 +-
arch/arm/boot/dts/am335x-igep0033.dtsi | 2 +-
arch/arm/boot/dts/am335x-lxm.dts | 2 +-
arch/arm/boot/dts/am335x-nano.dts | 2 +-
arch/arm/boot/dts/am335x-pepper.dts | 2 +-
arch/arm/boot/dts/am335x-phycore-som.dtsi | 2 +-
arch/arm/boot/dts/am335x-shc.dts | 2 +-
arch/arm/boot/dts/am335x-sl50.dts | 5 +++++
arch/arm/boot/dts/am33xx.dtsi | 4 ++--
arch/arm/boot/dts/am3517-craneboard.dts | 2 +-
arch/arm/boot/dts/am3517-evm.dts | 2 +-
arch/arm/boot/dts/am3517_mt_ventoux.dts | 2 +-
arch/arm/boot/dts/am4372.dtsi | 8 ++++++--
arch/arm/boot/dts/am572x-idk.dts | 2 +-
arch/arm/boot/dts/am57xx-beagle-x15.dts | 2 +-
arch/arm/boot/dts/am57xx-cl-som-am57x.dts | 2 +-
arch/arm/boot/dts/dm8148-evm.dts | 2 +-
arch/arm/boot/dts/dm8148-t410.dts | 2 +-
arch/arm/boot/dts/dm814x.dtsi | 4 ++--
arch/arm/boot/dts/dm8168-evm.dts | 2 +-
arch/arm/boot/dts/dm816x.dtsi | 4 ++--
arch/arm/boot/dts/dra62x-j5eco-evm.dts | 2 +-
arch/arm/boot/dts/dra7-evm.dts | 2 +-
arch/arm/boot/dts/dra7.dtsi | 2 --
arch/arm/boot/dts/dra72-evm-revc.dts | 2 +-
arch/arm/boot/dts/dra72-evm.dts | 2 +-
arch/arm/boot/dts/logicpd-torpedo-som.dtsi | 5 +++++
arch/arm/boot/dts/omap2.dtsi | 4 ++--
arch/arm/boot/dts/omap2420-h4.dts | 2 +-
arch/arm/boot/dts/omap2420-n8x0-common.dtsi | 2 +-
arch/arm/boot/dts/omap2430-sdp.dts | 2 +-
arch/arm/boot/dts/omap3-beagle-xm.dts | 2 +-
arch/arm/boot/dts/omap3-beagle.dts | 2 +-
arch/arm/boot/dts/omap3-cm-t3x.dtsi | 2 +-
arch/arm/boot/dts/omap3-devkit8000-common.dtsi | 2 +-
arch/arm/boot/dts/omap3-evm-37xx.dts | 2 +-
arch/arm/boot/dts/omap3-evm.dts | 2 +-
arch/arm/boot/dts/omap3-gta04.dtsi | 2 +-
arch/arm/boot/dts/omap3-igep.dtsi | 2 +-
arch/arm/boot/dts/omap3-ldp.dts | 2 +-
arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 2 +-
arch/arm/boot/dts/omap3-n900.dts | 2 +-
arch/arm/boot/dts/omap3-n950-n9.dtsi | 2 +-
arch/arm/boot/dts/omap3-overo-base.dtsi | 6 ++++++
arch/arm/boot/dts/omap3-pandora-common.dtsi | 2 +-
arch/arm/boot/dts/omap3-sniper.dts | 2 +-
arch/arm/boot/dts/omap3-tao3530.dtsi | 2 +-
arch/arm/boot/dts/omap3-zoom3.dts | 2 +-
arch/arm/boot/dts/omap3.dtsi | 4 ++--
arch/arm/boot/dts/omap3430-sdp.dts | 2 +-
arch/arm/boot/dts/omap4-duovero.dtsi | 2 +-
arch/arm/boot/dts/omap4-kc1.dts | 2 +-
arch/arm/boot/dts/omap4-panda-common.dtsi | 2 +-
arch/arm/boot/dts/omap4-sdp.dts | 2 +-
arch/arm/boot/dts/omap4-var-som-om44.dtsi | 2 +-
arch/arm/boot/dts/omap4.dtsi | 4 ++--
arch/arm/boot/dts/omap5-cm-t54.dts | 2 +-
arch/arm/boot/dts/omap5-igep0050.dts | 2 +-
arch/arm/boot/dts/omap5-uevm.dts | 2 +-
arch/arm/boot/dts/omap5.dtsi | 2 --
66 files changed, 88 insertions(+), 72 deletions(-)
--
2.7.4
next reply other threads:[~2016-08-31 10:35 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-31 10:35 Javier Martinez Canillas [this message]
2016-08-31 10:35 ` [PATCH 01/23] ARM: am335x: Add missing memory node in sl50 board Javier Martinez Canillas
2016-08-31 13:09 ` Enric Balletbo Serra
2016-08-31 10:35 ` [PATCH 02/23] ARM: omap3: Add missing memory node in overo and torpedo boards Javier Martinez Canillas
2016-08-31 10:35 ` [PATCH 03/23] ARM: dts: omap2: Remove skeleton.dtsi usage Javier Martinez Canillas
2016-08-31 10:35 ` [PATCH 04/23] ARM: dts: omap3: " Javier Martinez Canillas
2016-08-31 10:35 ` [PATCH 05/23] ARM: dts: omap4: " Javier Martinez Canillas
2016-08-31 10:35 ` [PATCH 06/23] ARM: dts: omap5: " Javier Martinez Canillas
2016-08-31 10:35 ` [PATCH 07/23] ARM: dts: am33xx: " Javier Martinez Canillas
2016-08-31 10:35 ` [PATCH 08/23] ARM: dts: dm814x: " Javier Martinez Canillas
2016-08-31 10:35 ` [PATCH 09/23] ARM: dts: dm816x: " Javier Martinez Canillas
2016-08-31 10:35 ` [PATCH 10/23] ARM: dts: dra7: " Javier Martinez Canillas
2016-08-31 10:35 ` [PATCH 11/23] ARM: dts: am4372: " Javier Martinez Canillas
2016-08-31 10:35 ` [PATCH 12/23] ARM: dts: omap2: Add missing unit name to memory nodes Javier Martinez Canillas
2016-08-31 10:35 ` [PATCH 13/23] ARM: dts: omap3: " Javier Martinez Canillas
2016-08-31 10:35 ` [PATCH 14/23] ARM: dts: omap4: " Javier Martinez Canillas
2016-08-31 10:35 ` [PATCH 15/23] ARM: dts: omap5: " Javier Martinez Canillas
2016-08-31 10:35 ` [PATCH 16/23] ARM: dts: am335x: " Javier Martinez Canillas
2016-08-31 10:35 ` [PATCH 17/23] ARM: dts: am3517: " Javier Martinez Canillas
2016-08-31 10:35 ` [PATCH 18/23] ARM: dts: am4372: " Javier Martinez Canillas
2016-08-31 10:35 ` [PATCH 19/23] ARM: dts: am572x: " Javier Martinez Canillas
2016-08-31 10:35 ` [PATCH 20/23] ARM: dts: dm8148: " Javier Martinez Canillas
2016-08-31 10:35 ` [PATCH 21/23] ARM: dts: dm8168: " Javier Martinez Canillas
2016-08-31 10:35 ` [PATCH 22/23] ARM: dts: dra62x: " Javier Martinez Canillas
2016-08-31 10:35 ` [PATCH 23/23] ARM: dts: dra7: " Javier Martinez Canillas
2016-08-31 14:24 ` [PATCH 00/23] ARM: dts: omap: Remove skeleton.dtsi usage and fix memory node DTC warning" Tony Lindgren
2016-08-31 17:54 ` Tony Lindgren
2016-09-01 8:46 ` Javier Martinez Canillas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1472639737-17586-1-git-send-email-javier@osg.samsung.com \
--to=javier@osg.samsung.com \
--cc=enric.balletbo@collabora.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.