All of lore.kernel.org
 help / color / mirror / Atom feed
From: Anusha Srivatsa <anusha.srivatsa@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Alex Dai <yu.dai@intel.com>, Peter Antoine <peter.antoine@intel.com>
Subject: [PATCH 3/8] drm/i915/huc: Add HuC fw loading support
Date: Fri, 13 Jan 2017 09:06:34 -0800	[thread overview]
Message-ID: <1484327194-19098-1-git-send-email-anusha.srivatsa@intel.com> (raw)

The HuC loading process is similar to GuC. The intel_uc_fw_fetch()
is used for both cases.

HuC loading needs to be before GuC loading. The WOPCM setting must
be done early before loading any of them.

v2: rebased on-top of drm-intel-nightly.
    removed if(HAS_GUC()) before the guc call. (D.Gordon)
    update huc_version number of format.
v3: rebased to drm-intel-nightly, changed the file name format to
    match the one in the huc package.
    Changed dev->dev_private to to_i915()
v4: moved function back to where it was.
    change wait_for_atomic to wait_for.
v5: rebased. Changed the year in the copyright message to reflect
the right year.Correct the comments,remove the unwanted WARN message,
replace drm_gem_object_unreference() with i915_gem_object_put().Make the
prototypes in intel_huc.h non-extern.
v6: rebased. Update the file construction done by HuC. It is similar to
GuC.Adopted the approach used in-
https://patchwork.freedesktop.org/patch/104355/ <Tvrtko Ursulin>
v7: Change dev to dev_priv in macro definition.
Corrected comments.
v8: rebased on top of drm-tip. Updated functions intel_huc_load(),intel_huc_init() and
intel_uc_fw_fetch() to accept dev_priv instead of dev. Moved contents
of intel_huc.h to intel_uc.h
v9: change SKL_FW_ to SKL_HUC_FW_. Add intel_ prefix to guc_wopcm_size().
Remove unwanted checks in intel_uc.h. Rename huc_fw in struct intel_huc to
simply fw to avoid redundency.
v10: rebased. Correct comments. Make intel_huc_fini() accept dev_priv instead of dev
like intel_huc_init() and intel_huc_load().Move definition to i915_guc_reg.h from
intel_uc.h. Clean DMA_CTRL bits after HuC DMA transfer in huc_ucode_xfer()
instead of guc_ucode_xfer(). Add suitable WARNs to give extra info.
v11: rebased. Add proper bias for HuC and make sure there are
asserts on failure by using guc_ggtt_offset_vma(). Introduce
intel_huc.c and remove intel_huc_loader.c since it has functions that
do more than just loading.Correct year in copyright.

Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Tested-by: Xiang Haihao <haihao.xiang@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Alex Dai <yu.dai@intel.com>
Signed-off-by: Peter Antoine <peter.antoine@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
---
 drivers/gpu/drm/i915/Makefile           |   1 +
 drivers/gpu/drm/i915/i915_drv.c         |   3 +
 drivers/gpu/drm/i915/i915_drv.h         |   2 +
 drivers/gpu/drm/i915/i915_guc_reg.h     |   6 +
 drivers/gpu/drm/i915/intel_guc_loader.c |   7 +-
 drivers/gpu/drm/i915/intel_huc.c        | 265 ++++++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_uc.h         |  14 ++
 7 files changed, 295 insertions(+), 3 deletions(-)
 create mode 100644 drivers/gpu/drm/i915/intel_huc.c

diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index 5196509..1ea051a 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -57,6 +57,7 @@ i915-y += i915_cmd_parser.o \
 # general-purpose microcontroller (GuC) support
 i915-y += intel_uc.o \
 	  intel_guc_loader.o \
+	  intel_huc.o \
 	  i915_guc_submission.o
 
 # autogenerated null render state
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 4e5ea58..d7a0b49 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -599,6 +599,7 @@ static int i915_load_modeset_init(struct drm_device *dev)
 	if (ret)
 		goto cleanup_irq;
 
+	intel_huc_init(dev_priv);
 	intel_guc_init(dev_priv);
 
 	ret = i915_gem_init(dev_priv);
@@ -627,6 +628,7 @@ static int i915_load_modeset_init(struct drm_device *dev)
 	i915_gem_fini(dev_priv);
 cleanup_irq:
 	intel_guc_fini(dev_priv);
+	intel_huc_fini(dev_priv);
 	drm_irq_uninstall(dev);
 	intel_teardown_gmbus(dev_priv);
 cleanup_csr:
@@ -1314,6 +1316,7 @@ void i915_driver_unload(struct drm_device *dev)
 	drain_workqueue(dev_priv->wq);
 
 	intel_guc_fini(dev_priv);
+	intel_huc_fini(dev_priv);
 	i915_gem_fini(dev_priv);
 	intel_fbc_cleanup_cfb(dev_priv);
 
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index b84c1d1..2a17df2 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -2073,6 +2073,7 @@ struct drm_i915_private {
 
 	struct intel_gvt *gvt;
 
+	struct intel_huc huc;
 	struct intel_guc guc;
 
 	struct intel_csr csr;
@@ -2847,6 +2848,7 @@ intel_info(const struct drm_i915_private *dev_priv)
 #define HAS_GUC(dev_priv)	((dev_priv)->info.has_guc)
 #define HAS_GUC_UCODE(dev_priv)	(HAS_GUC(dev_priv))
 #define HAS_GUC_SCHED(dev_priv)	(HAS_GUC(dev_priv))
+#define HAS_HUC_UCODE(dev_priv)	(HAS_GUC(dev_priv))
 
 #define HAS_RESOURCE_STREAMER(dev_priv) ((dev_priv)->info.has_resource_streamer)
 
diff --git a/drivers/gpu/drm/i915/i915_guc_reg.h b/drivers/gpu/drm/i915/i915_guc_reg.h
index 6a0adaf..35cf991 100644
--- a/drivers/gpu/drm/i915/i915_guc_reg.h
+++ b/drivers/gpu/drm/i915/i915_guc_reg.h
@@ -61,12 +61,18 @@
 #define   DMA_ADDRESS_SPACE_GTT		  (8 << 16)
 #define DMA_COPY_SIZE			_MMIO(0xc310)
 #define DMA_CTRL			_MMIO(0xc314)
+#define   HUC_UKERNEL			  (1<<9)
 #define   UOS_MOVE			  (1<<4)
 #define   START_DMA			  (1<<0)
 #define DMA_GUC_WOPCM_OFFSET		_MMIO(0xc340)
+#define   HUC_LOADING_AGENT_VCR		  (0<<1)
+#define   HUC_LOADING_AGENT_GUC		  (1<<1)
 #define   GUC_WOPCM_OFFSET_VALUE	  0x80000	/* 512KB */
 #define GUC_MAX_IDLE_COUNT		_MMIO(0xC3E4)
 
+#define HUC_STATUS2             _MMIO(0xD3B0)
+#define   HUC_FW_VERIFIED       (1<<7)
+
 /* Defines WOPCM space available to GuC firmware */
 #define GUC_WOPCM_SIZE			_MMIO(0xc050)
 /* GuC addresses below GUC_WOPCM_TOP don't map through the GTT */
diff --git a/drivers/gpu/drm/i915/intel_guc_loader.c b/drivers/gpu/drm/i915/intel_guc_loader.c
index 8ca2f62..861c157 100644
--- a/drivers/gpu/drm/i915/intel_guc_loader.c
+++ b/drivers/gpu/drm/i915/intel_guc_loader.c
@@ -334,7 +334,7 @@ static int guc_ucode_xfer_dma(struct drm_i915_private *dev_priv,
 	return ret;
 }
 
-static u32 guc_wopcm_size(struct drm_i915_private *dev_priv)
+u32 intel_guc_wopcm_size(struct drm_i915_private *dev_priv)
 {
 	u32 wopcm_size = GUC_WOPCM_TOP;
 
@@ -373,7 +373,7 @@ static int guc_ucode_xfer(struct drm_i915_private *dev_priv)
 	intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
 
 	/* init WOPCM */
-	I915_WRITE(GUC_WOPCM_SIZE, guc_wopcm_size(dev_priv));
+	I915_WRITE(GUC_WOPCM_SIZE, intel_guc_wopcm_size(dev_priv));
 	I915_WRITE(DMA_GUC_WOPCM_OFFSET, GUC_WOPCM_OFFSET_VALUE);
 
 	/* Enable MIA caching. GuC clock gating is disabled. */
@@ -512,6 +512,7 @@ int intel_guc_setup(struct drm_i915_private *dev_priv)
 		if (err)
 			goto fail;
 
+		intel_huc_load(dev_priv);
 		err = guc_ucode_xfer(dev_priv);
 		if (!err)
 			break;
@@ -659,7 +660,7 @@ void intel_uc_fw_fetch(struct drm_i915_private *dev_priv,
 		size = uc_fw->header_size + uc_fw->ucode_size;
 
 		/* Top 32k of WOPCM is reserved (8K stack + 24k RC6 context). */
-		if (size > guc_wopcm_size(dev_priv)) {
+		if (size > intel_guc_wopcm_size(dev_priv)) {
 			DRM_ERROR("Firmware is too large to fit in WOPCM\n");
 			goto fail;
 		}
diff --git a/drivers/gpu/drm/i915/intel_huc.c b/drivers/gpu/drm/i915/intel_huc.c
new file mode 100644
index 0000000..d567721
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_huc.c
@@ -0,0 +1,265 @@
+/*
+ * Copyright © 2016-2017 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ */
+#include <linux/firmware.h>
+#include "i915_drv.h"
+#include "intel_uc.h"
+
+/**
+ * DOC: HuC Firmware
+ *
+ * Motivation:
+ * GEN9 introduces a new dedicated firmware for usage in media HEVC (High
+ * Efficiency Video Coding) operations. Userspace can use the firmware
+ * capabilities by adding HuC specific commands to batch buffers.
+ *
+ * Implementation:
+ * The same firmware loader is used as the GuC. However, the actual
+ * loading to HW is deferred until GEM initialization is done.
+ *
+ * Note that HuC firmware loading must be done before GuC loading.
+ */
+
+#define SKL_HUC_FW_MAJOR 01
+#define SKL_HUC_FW_MINOR 07
+#define SKL_BLD_NUM 1398
+
+#define HUC_FW_PATH(platform, major, minor, bld_num) \
+	"i915/" __stringify(platform) "_huc_ver" __stringify(major) "_" \
+	__stringify(minor) "_" __stringify(bld_num) ".bin"
+
+#define I915_SKL_HUC_UCODE HUC_FW_PATH(skl, SKL_HUC_FW_MAJOR, \
+	SKL_HUC_FW_MINOR, SKL_BLD_NUM)
+MODULE_FIRMWARE(I915_SKL_HUC_UCODE);
+
+/**
+ * huc_ucode_xfer() - DMA's the firmware
+ * @dev_priv: the drm_i915_private device
+ *
+ * Transfer the firmware image to RAM for execution by the microcontroller.
+ *
+ * Return: 0 on success, non-zero on failure
+ */
+static int huc_ucode_xfer(struct drm_i915_private *dev_priv)
+{
+	struct intel_uc_fw *huc_fw = &dev_priv->huc.fw;
+	struct i915_vma *vma;
+	unsigned long offset = 0;
+	u32 size;
+	int ret;
+
+	ret = i915_gem_object_set_to_gtt_domain(huc_fw->obj, false);
+	if (ret) {
+		DRM_DEBUG_DRIVER("set-domain failed %d\n", ret);
+		return ret;
+	}
+
+	vma = i915_gem_object_ggtt_pin(huc_fw->obj, NULL, 0, 0,
+				PIN_OFFSET_BIAS | GUC_WOPCM_TOP);
+	if (IS_ERR(vma)) {
+		DRM_DEBUG_DRIVER("pin failed %d\n", (int)PTR_ERR(vma));
+		return PTR_ERR(vma);
+	}
+
+	/* Invalidate GuC TLB to let GuC take the latest updates to GTT. */
+	I915_WRITE(GEN8_GTCR, GEN8_GTCR_INVALIDATE);
+
+	intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
+
+	/* init WOPCM */
+	I915_WRITE(GUC_WOPCM_SIZE, intel_guc_wopcm_size(dev_priv));
+	I915_WRITE(DMA_GUC_WOPCM_OFFSET, GUC_WOPCM_OFFSET_VALUE |
+			HUC_LOADING_AGENT_GUC);
+
+	/* Set the source address for the uCode */
+	offset = guc_ggtt_offset(vma) + huc_fw->header_offset;
+	I915_WRITE(DMA_ADDR_0_LOW, lower_32_bits(offset));
+	I915_WRITE(DMA_ADDR_0_HIGH, upper_32_bits(offset) & 0xFFFF);
+
+	/* Hardware doesn't look at destination address for HuC. Set it to 0,
+	 * but still program the correct address space.
+	 */
+	I915_WRITE(DMA_ADDR_1_LOW, 0);
+	I915_WRITE(DMA_ADDR_1_HIGH, DMA_ADDRESS_SPACE_WOPCM);
+
+	size = huc_fw->header_size + huc_fw->ucode_size;
+	I915_WRITE(DMA_COPY_SIZE, size);
+
+	/* Start the DMA */
+	I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(HUC_UKERNEL | START_DMA));
+
+	/* Wait for DMA to finish */
+	ret = wait_for((I915_READ(DMA_CTRL) & START_DMA) == 0, 100);
+
+	DRM_DEBUG_DRIVER("HuC DMA transfer wait over with ret %d\n", ret);
+
+	/* Disable the bits once DMA is over */
+	I915_WRITE(DMA_CTRL, _MASKED_BIT_DISABLE(HUC_UKERNEL));
+
+	intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
+
+	/*
+	 * We keep the object pages for reuse during resume. But we can unpin it
+	 * now that DMA has completed, so it doesn't continue to take up space.
+	 */
+	i915_vma_unpin(vma);
+
+	return ret;
+}
+
+/**
+ * intel_huc_init() - initiate HuC firmware loading request
+ * @dev_priv: the drm_i915_private device
+ *
+ * Called early during driver load, but after GEM is initialised. The loading
+ * will continue only when driver explicitly specify firmware name and version.
+ * All other cases are considered as INTEL_UC_FIRMWARE_NONE either because HW
+ * is not capable or driver yet support it. And there will be no error message
+ * for INTEL_UC_FIRMWARE_NONE cases.
+ *
+ * The DMA-copying to HW is done later when intel_huc_load() is called.
+ */
+void intel_huc_init(struct drm_i915_private *dev_priv)
+{
+	struct intel_huc *huc = &dev_priv->huc;
+	struct intel_uc_fw *huc_fw = &huc->fw;
+	const char *fw_path = NULL;
+
+	huc_fw->path = NULL;
+	huc_fw->fetch_status = INTEL_UC_FIRMWARE_NONE;
+	huc_fw->load_status = INTEL_UC_FIRMWARE_NONE;
+	huc_fw->fw = INTEL_UC_FW_TYPE_HUC;
+
+	if (!HAS_HUC_UCODE(dev_priv))
+		return;
+
+	if (IS_SKYLAKE(dev_priv)) {
+		fw_path = I915_SKL_HUC_UCODE;
+		huc_fw->major_ver_wanted = SKL_HUC_FW_MAJOR;
+		huc_fw->minor_ver_wanted = SKL_HUC_FW_MINOR;
+	}
+
+	huc_fw->path = fw_path;
+	huc_fw->fetch_status = INTEL_UC_FIRMWARE_PENDING;
+
+	DRM_DEBUG_DRIVER("HuC firmware pending, path %s\n", fw_path);
+
+	WARN(huc_fw->path == NULL, "HuC present but no fw path\n");
+
+	intel_uc_fw_fetch(dev_priv, huc_fw);
+}
+
+/**
+ * intel_huc_load() - load HuC uCode to device
+ * @dev_priv: the drm_i915_private device
+ *
+ * Called from guc_setup() during driver loading and also after a GPU reset.
+ * Be note that HuC loading must be done before GuC loading.
+ *
+ * The firmware image should have already been fetched into memory by the
+ * earlier call to intel_huc_init(), so here we need only check that
+ * is succeeded, and then transfer the image to the h/w.
+ *
+ * Return:	non-zero code on error
+ */
+int intel_huc_load(struct drm_i915_private *dev_priv)
+{
+	struct intel_uc_fw *huc_fw = &dev_priv->huc.fw;
+	int err;
+
+	if (huc_fw->fetch_status == INTEL_UC_FIRMWARE_NONE)
+		return 0;
+
+	DRM_DEBUG_DRIVER("%s fw status: fetch %s, load %s\n",
+		huc_fw->path,
+		intel_uc_fw_status_repr(huc_fw->fetch_status),
+		intel_uc_fw_status_repr(huc_fw->load_status));
+
+	if (huc_fw->fetch_status == INTEL_UC_FIRMWARE_SUCCESS &&
+	    huc_fw->load_status == INTEL_UC_FIRMWARE_FAIL)
+		return -ENOEXEC;
+
+	huc_fw->load_status = INTEL_UC_FIRMWARE_PENDING;
+
+	switch (huc_fw->fetch_status) {
+	case INTEL_UC_FIRMWARE_FAIL:
+		/* something went wrong :( */
+		err = -EIO;
+		goto fail;
+
+	case INTEL_UC_FIRMWARE_NONE:
+	case INTEL_UC_FIRMWARE_PENDING:
+	default:
+		/* "can't happen" */
+		WARN_ONCE(1, "HuC fw %s invalid fetch_status %s [%d]\n",
+			huc_fw->path,
+			intel_uc_fw_status_repr(huc_fw->fetch_status),
+			huc_fw->fetch_status);
+		err = -ENXIO;
+		goto fail;
+
+	case INTEL_UC_FIRMWARE_SUCCESS:
+		break;
+	}
+
+	err = huc_ucode_xfer(dev_priv);
+	if (err)
+		goto fail;
+
+	huc_fw->load_status = INTEL_UC_FIRMWARE_SUCCESS;
+
+	DRM_DEBUG_DRIVER("%s fw status: fetch %s, load %s\n",
+		huc_fw->path,
+		intel_uc_fw_status_repr(huc_fw->fetch_status),
+		intel_uc_fw_status_repr(huc_fw->load_status));
+
+	return 0;
+
+fail:
+	if (huc_fw->load_status == INTEL_UC_FIRMWARE_PENDING)
+		huc_fw->load_status = INTEL_UC_FIRMWARE_FAIL;
+
+	DRM_ERROR("Failed to complete HuC uCode load with ret %d\n", err);
+
+	return err;
+}
+
+/**
+ * intel_huc_fini() - clean up resources allocated for HuC
+ * @dev_priv: the drm_i915_private device
+ *
+ * Cleans up by releasing the huc firmware GEM obj.
+ */
+void intel_huc_fini(struct drm_i915_private *dev_priv)
+{
+	struct intel_uc_fw *huc_fw = &dev_priv->huc.fw;
+
+	mutex_lock(&dev_priv->drm.struct_mutex);
+	if (huc_fw->obj)
+		i915_gem_object_put(huc_fw->obj);
+	huc_fw->obj = NULL;
+	mutex_unlock(&dev_priv->drm.struct_mutex);
+
+	huc_fw->fetch_status = INTEL_UC_FIRMWARE_NONE;
+}
+
diff --git a/drivers/gpu/drm/i915/intel_uc.h b/drivers/gpu/drm/i915/intel_uc.h
index c2c3919..65c7d6e 100644
--- a/drivers/gpu/drm/i915/intel_uc.h
+++ b/drivers/gpu/drm/i915/intel_uc.h
@@ -176,6 +176,13 @@ struct intel_guc {
 	struct mutex send_mutex;
 };
 
+struct intel_huc {
+	/* Generic uC firmware management */
+	struct intel_uc_fw fw;
+
+	/* HuC-specific additions */
+};
+
 /* intel_uc.c */
 void intel_uc_init_early(struct drm_i915_private *dev_priv);
 int intel_guc_send(struct intel_guc *guc, const u32 *action, u32 len);
@@ -191,6 +198,8 @@ extern void intel_guc_fini(struct drm_i915_private *dev_priv);
 extern const char *intel_uc_fw_status_repr(enum intel_uc_fw_status status);
 extern int intel_guc_suspend(struct drm_i915_private *dev_priv);
 extern int intel_guc_resume(struct drm_i915_private *dev_priv);
+void intel_uc_fw_fetch(struct drm_i915_private *dev_priv,
+	struct intel_uc_fw *uc_fw);
 u32 intel_guc_wopcm_size(struct drm_i915_private *dev_priv);
 
 /* i915_guc_submission.c */
@@ -214,4 +223,9 @@ static inline u32 guc_ggtt_offset(struct i915_vma *vma)
 	return offset;
 }
 
+/* intel_huc.c */
+void intel_huc_init(struct drm_i915_private *dev_priv);
+void intel_huc_fini(struct drm_i915_private  *dev_priv);
+int intel_huc_load(struct drm_i915_private *dev_priv);
+
 #endif
-- 
2.7.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

             reply	other threads:[~2017-01-13 17:09 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-13 17:06 Anusha Srivatsa [this message]
2017-01-13 17:15 ` [PATCH 3/8] drm/i915/huc: Add HuC fw loading support Chris Wilson
2017-01-13 17:37   ` Srivatsa, Anusha
  -- strict thread matches above, loose matches on Subject: below --
2017-01-14  1:17 [PATCH 0/8] HuC Loading Patches Anusha Srivatsa
2017-01-14  1:17 ` [PATCH 3/8] drm/i915/huc: Add HuC fw loading support Anusha Srivatsa
2017-01-18 10:00   ` Jani Nikula
2017-01-13 18:08 [PATCH 0/8] HuC Loading Patches Anusha Srivatsa
2017-01-13 18:08 ` [PATCH 3/8] drm/i915/huc: Add HuC fw loading support Anusha Srivatsa
2017-01-04 14:55 [PATCH 0/8] HuC Loading Patches Anusha Srivatsa
2017-01-04 14:55 ` [PATCH 3/8] drm/i915/huc: Add HuC fw loading support Anusha Srivatsa
2017-01-04 13:27 [PATCH 0/8] HuC Loading Patches Anusha Srivatsa
2017-01-04 13:27 ` [PATCH 3/8] drm/i915/huc: Add HuC fw loading support Anusha Srivatsa
2016-12-22 23:12 [PATCH 0/8] HuC Loading Patches Anusha Srivatsa
2016-12-22 23:12 ` [PATCH 3/8] drm/i915/huc: Add HuC fw loading support Anusha Srivatsa
2016-12-27 12:37   ` Arkadiusz Hiler
2016-12-27 17:50   ` Michal Wajdeczko
2017-01-03  0:08     ` Srivatsa, Anusha
2017-01-03 18:59       ` Srivatsa, Anusha
2017-01-04 15:15         ` Arkadiusz Hiler
2016-12-15 22:29 [PATCH 0/8] HuC Loading Patches anushasr
2016-12-15 22:29 ` [PATCH 3/8] drm/i915/huc: Add HuC fw loading support anushasr
2016-12-16 16:13   ` Tvrtko Ursulin
2016-12-16 16:29     ` Arkadiusz Hiler
2016-12-16 16:40       ` Tvrtko Ursulin
2016-12-08 23:02 [PATCH 0/8]HuC Loading Patches anushasr
2016-12-08 23:02 ` [PATCH 3/8] drm/i915/huc: Add HuC fw loading support anushasr
2016-12-09 10:56   ` Arkadiusz Hiler
2016-12-09 11:10     ` Chris Wilson
2016-12-09 11:34       ` Arkadiusz Hiler
2016-12-09 12:19         ` Arkadiusz Hiler
2016-12-09 12:17   ` Michal Wajdeczko
2016-12-09 23:56     ` Srivatsa, Anusha
2016-12-12 11:50       ` Arkadiusz Hiler
2016-12-12 18:52   ` Tvrtko Ursulin
2016-12-14 15:19     ` Jani Nikula
2016-12-14 15:24       ` Parenteau, Paul A
2016-11-30 23:31 [PATCH 0/8] HuC Loading Patches Anusha Srivatsa
2016-11-30 23:31 ` [PATCH 3/8] drm/i915/huc: Add HuC fw loading support Anusha Srivatsa
2016-12-01 13:24   ` Tvrtko Ursulin
2016-12-01 17:18     ` Srivatsa, Anusha
2016-11-23 22:27 [PATCH 0/8] HuC Loading Patches Anusha Srivatsa
2016-11-23 22:27 ` [PATCH 3/8] drm/i915/huc: Add HuC fw loading support Anusha Srivatsa
2016-11-11  0:15 [PATCH v4 0/8] HuC Loading Patches Anusha Srivatsa
2016-11-11  0:15 ` [PATCH 3/8] drm/i915/huc: Add HuC fw loading support Anusha Srivatsa
2016-11-12  2:05   ` Jeff McGee
2016-11-12  2:09     ` Jeff McGee
2016-11-09 18:51 [PATCH 1/8] drm/i915/guc: Make the GuC fw loading helper functions general Anusha Srivatsa
2016-11-09 18:51 ` [PATCH 3/8] drm/i915/huc: Add HuC fw loading support Anusha Srivatsa
2016-10-03 18:42 [PATCH 0/8] HuC Loading Patches Anusha Srivatsa
2016-10-03 18:42 ` [PATCH 3/8] drm/i915/huc: Add HuC fw loading support Anusha Srivatsa
2016-10-13 17:42   ` Jeff McGee
2016-10-13 20:54     ` Jeff McGee
2016-10-24 21:24       ` Carlos Santa
2016-10-24 22:25         ` Jeff McGee
2016-09-29 18:03 [PATCH 0/8] HuC Loading Patches Anusha Srivatsa
2016-09-29 18:04 ` [PATCH 3/8] drm/i915/huc: Add HuC fw loading support Anusha Srivatsa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1484327194-19098-1-git-send-email-anusha.srivatsa@intel.com \
    --to=anusha.srivatsa@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=peter.antoine@intel.com \
    --cc=yu.dai@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.