From: fugang.duan@nxp.com (Andy Duan)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v1 1/2] clk: imx7d: correct enet clock CCGR register offset
Date: Fri, 10 Feb 2017 22:27:43 +0800 [thread overview]
Message-ID: <1486736864-21908-2-git-send-email-fugang.duan@nxp.com> (raw)
In-Reply-To: <1486736864-21908-1-git-send-email-fugang.duan@nxp.com>
Correct enet clock CCGR register offset.
CCGR6: IMX7D_ENET_AXI_ROOT_CLK (enet1 enet2 bus clocks)
CCGR112: IMX7D_ENET1_TIME_ROOT_CLK, IMX7D_ENET1_IPG_ROOT_CLK
CCGR113: IMX7D_ENET2_TIME_ROOT_CLK, IMX7D_ENET2_IPG_ROOT_CLK
IMX7D_ENET_PHY_REF_ROOT_DIV supply clock for PHY, no gate after the clock, its parent
clock root has gate.
IMX7D_ENET1_REF_ROOT_DIV/IMX7D_ENET2_REF_ROOT_DIV supply clocks for enet IPG_CLK_RMII,
no gate after the clock, its parent clock root has gate.
IMX7D_PLL_ENET_MAIN_125M_CLK (anatop pll) supply clock for enet RGMII tx_clk.
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/clk/imx/clk-imx7d.c | 11 ++++++-----
include/dt-bindings/clock/imx7d-clock.h | 4 +++-
2 files changed, 9 insertions(+), 6 deletions(-)
diff --git a/drivers/clk/imx/clk-imx7d.c b/drivers/clk/imx/clk-imx7d.c
index ae1d31b..b8d2ecb 100644
--- a/drivers/clk/imx/clk-imx7d.c
+++ b/drivers/clk/imx/clk-imx7d.c
@@ -25,6 +25,8 @@
static u32 share_count_sai1;
static u32 share_count_sai2;
static u32 share_count_sai3;
+static u32 share_count_enet1;
+static u32 share_count_enet2;
static struct clk_div_table test_div_table[] = {
{ .val = 3, .div = 1, },
@@ -813,6 +815,10 @@ static void __init imx7d_clocks_init(struct device_node *ccm_node)
clks[IMX7D_MIPI_DSI_ROOT_CLK] = imx_clk_gate4("mipi_dsi_root_clk", "mipi_dsi_post_div", base + 0x4650, 0);
clks[IMX7D_MIPI_CSI_ROOT_CLK] = imx_clk_gate4("mipi_csi_root_clk", "mipi_csi_post_div", base + 0x4640, 0);
clks[IMX7D_MIPI_DPHY_ROOT_CLK] = imx_clk_gate4("mipi_dphy_root_clk", "mipi_dphy_post_div", base + 0x4660, 0);
+ clks[IMX7D_ENET1_IPG_ROOT_CLK] = imx_clk_gate2_shared2("enet1_ipg_root_clk", "enet_axi_post_div", base + 0x4700, 0, &share_count_enet1);
+ clks[IMX7D_ENET1_TIME_ROOT_CLK] = imx_clk_gate2_shared2("enet1_time_root_clk", "enet1_time_post_div", base + 0x4700, 0, &share_count_enet1);
+ clks[IMX7D_ENET2_IPG_ROOT_CLK] = imx_clk_gate2_shared2("enet2_ipg_root_clk", "enet_axi_post_div", base + 0x4710, 0, &share_count_enet2);
+ clks[IMX7D_ENET2_TIME_ROOT_CLK] = imx_clk_gate2_shared2("enet2_time_root_clk", "enet2_time_post_div", base + 0x4710, 0, &share_count_enet2);
clks[IMX7D_SAI1_ROOT_CLK] = imx_clk_gate2_shared2("sai1_root_clk", "sai1_post_div", base + 0x48c0, 0, &share_count_sai1);
clks[IMX7D_SAI1_IPG_CLK] = imx_clk_gate2_shared2("sai1_ipg_clk", "ipg_root_clk", base + 0x48c0, 0, &share_count_sai1);
clks[IMX7D_SAI2_ROOT_CLK] = imx_clk_gate2_shared2("sai2_root_clk", "sai2_post_div", base + 0x48d0, 0, &share_count_sai2);
@@ -820,11 +826,6 @@ static void __init imx7d_clocks_init(struct device_node *ccm_node)
clks[IMX7D_SAI3_ROOT_CLK] = imx_clk_gate2_shared2("sai3_root_clk", "sai3_post_div", base + 0x48e0, 0, &share_count_sai3);
clks[IMX7D_SAI3_IPG_CLK] = imx_clk_gate2_shared2("sai3_ipg_clk", "ipg_root_clk", base + 0x48e0, 0, &share_count_sai3);
clks[IMX7D_SPDIF_ROOT_CLK] = imx_clk_gate4("spdif_root_clk", "spdif_post_div", base + 0x44d0, 0);
- clks[IMX7D_ENET1_REF_ROOT_CLK] = imx_clk_gate4("enet1_ref_root_clk", "enet1_ref_post_div", base + 0x44e0, 0);
- clks[IMX7D_ENET1_TIME_ROOT_CLK] = imx_clk_gate4("enet1_time_root_clk", "enet1_time_post_div", base + 0x44f0, 0);
- clks[IMX7D_ENET2_REF_ROOT_CLK] = imx_clk_gate4("enet2_ref_root_clk", "enet2_ref_post_div", base + 0x4500, 0);
- clks[IMX7D_ENET2_TIME_ROOT_CLK] = imx_clk_gate4("enet2_time_root_clk", "enet2_time_post_div", base + 0x4510, 0);
- clks[IMX7D_ENET_PHY_REF_ROOT_CLK] = imx_clk_gate4("enet_phy_ref_root_clk", "enet_phy_ref_post_div", base + 0x4520, 0);
clks[IMX7D_EIM_ROOT_CLK] = imx_clk_gate4("eim_root_clk", "eim_post_div", base + 0x4160, 0);
clks[IMX7D_NAND_ROOT_CLK] = imx_clk_gate4("nand_root_clk", "nand_post_div", base + 0x4140, 0);
clks[IMX7D_QSPI_ROOT_CLK] = imx_clk_gate4("qspi_root_clk", "qspi_post_div", base + 0x4150, 0);
diff --git a/include/dt-bindings/clock/imx7d-clock.h b/include/dt-bindings/clock/imx7d-clock.h
index a7a1a50..be2e734 100644
--- a/include/dt-bindings/clock/imx7d-clock.h
+++ b/include/dt-bindings/clock/imx7d-clock.h
@@ -450,5 +450,7 @@
#define IMX7D_CLK_ARM 437
#define IMX7D_CKIL 438
#define IMX7D_OCOTP_CLK 439
-#define IMX7D_CLK_END 440
+#define IMX7D_ENET1_IPG_ROOT_CLK 440
+#define IMX7D_ENET2_IPG_ROOT_CLK 441
+#define IMX7D_CLK_END 442
#endif /* __DT_BINDINGS_CLOCK_IMX7D_H */
--
1.9.1
next prev parent reply other threads:[~2017-02-10 14:27 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-10 14:27 [PATCH v1 0/2] clk: imx7d: correct enet clock CCGR register offset Andy Duan
2017-02-10 14:27 ` Andy Duan [this message]
2017-02-10 14:27 ` [PATCH v1 2/2] ARM: dts: imx7d: correct enet ipg and enet_out clock Andy Duan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1486736864-21908-2-git-send-email-fugang.duan@nxp.com \
--to=fugang.duan@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.