From: Kamal Dasu <kdasu.kdev@gmail.com>
To: broonie@kernel.org, rnd@arndb.de, cyrille.pitchen@atmel.com
Cc: geert+renesas@glider.be, hauke@hauke-m.de, f.fainelli@gmail.com,
bcm-kernel-feedback-list@broadcom.com, linux-spi@vger.kernel.org,
linux-kernel@vger.kernel.org, Kamal Dasu <kdasu.kdev@gmail.com>
Subject: [PATCH] spi: bcm-qspi: Remove hardcoded settings and spi-nor.h dependency
Date: Wed, 26 Jul 2017 19:20:15 -0400 [thread overview]
Message-ID: <1501111215-2654-1-git-send-email-kdasu.kdev@gmail.com> (raw)
The newly added broadcom qspi driver in drivers/spi produces a build
warning when CONFIG_MTD is disabled:
include/linux/mtd/cfi.h:76:2: #warning No CONFIG_MTD_CFI_Ix selected. No NOR chip support can work. [-Werror=cpp]
There has been discussion on this in the link provided below. This fix in
SPI controller drivers implementing the ->spi_flash_read handler, now uses the
settings provided inside the 'struct spi_flash_read_message' parameter instead
of hardcoding them. Made changes to bcm_qspi_bspi_set_flex_mode() to set the BSPI
controller using the passed msg structure and remove the need to include
<linux/mtd/spi-nor.h> file by removing all use of SPINOR_OP_READ* macros.
Fixes: 4e3b2d236fe0 ("spi: bcm-qspi: Add BSPI spi-nor flash controller driver")
Link: https://patchwork.kernel.org/patch/9624585/
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
---
drivers/spi/spi-bcm-qspi.c | 89 +++++++++++++++++-----------------------------
1 file changed, 33 insertions(+), 56 deletions(-)
diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c
index b19722b..6ef6c44 100644
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -25,7 +25,6 @@
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/mtd/spi-nor.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/platform_device.h>
@@ -349,76 +348,60 @@ static void bcm_qspi_bspi_set_xfer_params(struct bcm_qspi *qspi, u8 cmd_byte,
bcm_qspi_write(qspi, BSPI, BSPI_FLEX_MODE_ENABLE, flex_mode);
}
-static int bcm_qspi_bspi_set_flex_mode(struct bcm_qspi *qspi, int width,
- int addrlen, int hp)
+static int bcm_qspi_bspi_set_flex_mode(struct bcm_qspi *qspi,
+ struct spi_flash_read_message *msg,
+ int hp)
{
int bpc = 0, bpp = 0;
- u8 command = SPINOR_OP_READ_FAST;
- int flex_mode = 1, rv = 0;
- bool spans_4byte = false;
+ u8 command = msg->read_opcode;
+ int width = msg->data_nbits ? msg->data_nbits : SPI_NBITS_SINGLE;
+ int addrlen = msg->addr_width;
+ int addr_nbits = msg->addr_nbits ? msg->addr_nbits : SPI_NBITS_SINGLE;
+ int flex_mode = 1;
dev_dbg(&qspi->pdev->dev, "set flex mode w %x addrlen %x hp %d\n",
width, addrlen, hp);
- if (addrlen == BSPI_ADDRLEN_4BYTES) {
+ if (addrlen == BSPI_ADDRLEN_4BYTES)
bpp = BSPI_BPP_ADDR_SELECT_MASK;
- spans_4byte = true;
- }
- bpp |= 8;
+ bpp |= msg->dummy_bytes * (8/addr_nbits);
switch (width) {
case SPI_NBITS_SINGLE:
if (addrlen == BSPI_ADDRLEN_3BYTES)
/* default mode, does not need flex_cmd */
flex_mode = 0;
- else
- command = SPINOR_OP_READ_FAST_4B;
break;
case SPI_NBITS_DUAL:
bpc = 0x00000001;
if (hp) {
bpc |= 0x00010100; /* address and mode are 2-bit */
bpp = BSPI_BPP_MODE_SELECT_MASK;
- command = OPCODE_DIOR;
- if (spans_4byte)
- command = OPCODE_DIOR_4B;
- } else {
- command = SPINOR_OP_READ_1_1_2;
- if (spans_4byte)
- command = SPINOR_OP_READ_1_1_2_4B;
}
break;
case SPI_NBITS_QUAD:
bpc = 0x00000002;
if (hp) {
bpc |= 0x00020200; /* address and mode are 4-bit */
- bpp = 4; /* dummy cycles */
- bpp |= BSPI_BPP_ADDR_SELECT_MASK;
- command = OPCODE_QIOR;
- if (spans_4byte)
- command = OPCODE_QIOR_4B;
- } else {
- command = SPINOR_OP_READ_1_1_4;
- if (spans_4byte)
- command = SPINOR_OP_READ_1_1_4_4B;
+ bpp |= BSPI_BPP_MODE_SELECT_MASK;
}
break;
default:
- rv = -EINVAL;
- break;
+ return -EINVAL;
}
- if (rv == 0)
- bcm_qspi_bspi_set_xfer_params(qspi, command, bpp, bpc,
- flex_mode);
+ bcm_qspi_bspi_set_xfer_params(qspi, command, bpp, bpc, flex_mode);
- return rv;
+ return 0;
}
-static int bcm_qspi_bspi_set_override(struct bcm_qspi *qspi, int width,
- int addrlen, int hp)
+static int bcm_qspi_bspi_set_override(struct bcm_qspi *qspi,
+ struct spi_flash_read_message *msg,
+ int hp)
{
+ int width = msg->data_nbits ? msg->data_nbits : SPI_NBITS_SINGLE;
+ int addrlen = msg->addr_width;
u32 data = bcm_qspi_read(qspi, BSPI, BSPI_STRAP_OVERRIDE_CTRL);
dev_dbg(&qspi->pdev->dev, "set override mode w %x addrlen %x hp %d\n",
@@ -430,7 +413,6 @@ static int bcm_qspi_bspi_set_override(struct bcm_qspi *qspi, int width,
data &= ~(BSPI_STRAP_OVERRIDE_CTRL_DATA_QUAD |
BSPI_STRAP_OVERRIDE_CTRL_DATA_DUAL);
break;
-
case SPI_NBITS_QUAD:
/* clear dual mode and set quad mode */
data &= ~BSPI_STRAP_OVERRIDE_CTRL_DATA_DUAL;
@@ -455,15 +437,17 @@ static int bcm_qspi_bspi_set_override(struct bcm_qspi *qspi, int width,
/* set the override mode */
data |= BSPI_STRAP_OVERRIDE_CTRL_OVERRIDE;
bcm_qspi_write(qspi, BSPI, BSPI_STRAP_OVERRIDE_CTRL, data);
- bcm_qspi_bspi_set_xfer_params(qspi, SPINOR_OP_READ_FAST, 0, 0, 0);
+ bcm_qspi_bspi_set_xfer_params(qspi, msg->read_opcode, 0, 0, 0);
return 0;
}
static int bcm_qspi_bspi_set_mode(struct bcm_qspi *qspi,
- int width, int addrlen, int hp)
+ struct spi_flash_read_message *msg, int hp)
{
int error = 0;
+ int width = msg->data_nbits ? msg->data_nbits : SPI_NBITS_SINGLE;
+ int addrlen = msg->addr_width;
/* default mode */
qspi->xfer_mode.flex_mode = true;
@@ -475,23 +459,13 @@ static int bcm_qspi_bspi_set_mode(struct bcm_qspi *qspi,
mask = BSPI_STRAP_OVERRIDE_CTRL_OVERRIDE;
if (val & mask || qspi->s3_strap_override_ctrl & mask) {
qspi->xfer_mode.flex_mode = false;
- bcm_qspi_write(qspi, BSPI, BSPI_FLEX_MODE_ENABLE,
- 0);
-
- if ((val | qspi->s3_strap_override_ctrl) &
- BSPI_STRAP_OVERRIDE_CTRL_DATA_DUAL)
- width = SPI_NBITS_DUAL;
- else if ((val | qspi->s3_strap_override_ctrl) &
- BSPI_STRAP_OVERRIDE_CTRL_DATA_QUAD)
- width = SPI_NBITS_QUAD;
-
- error = bcm_qspi_bspi_set_override(qspi, width, addrlen,
- hp);
+ bcm_qspi_write(qspi, BSPI, BSPI_FLEX_MODE_ENABLE, 0);
+ error = bcm_qspi_bspi_set_override(qspi, msg, hp);
}
}
if (qspi->xfer_mode.flex_mode)
- error = bcm_qspi_bspi_set_flex_mode(qspi, width, addrlen, hp);
+ error = bcm_qspi_bspi_set_flex_mode(qspi, msg, hp);
if (error) {
dev_warn(&qspi->pdev->dev,
@@ -981,7 +955,7 @@ static int bcm_qspi_flash_read(struct spi_device *spi,
struct bcm_qspi *qspi = spi_master_get_devdata(spi->master);
int ret = 0;
bool mspi_read = false;
- u32 io_width, addrlen, addr, len;
+ u32 addr, len;
u_char *buf;
buf = msg->buf;
@@ -1010,9 +984,7 @@ static int bcm_qspi_flash_read(struct spi_device *spi,
if (mspi_read)
return bcm_qspi_mspi_flash_read(spi, msg);
- io_width = msg->data_nbits ? msg->data_nbits : SPI_NBITS_SINGLE;
- addrlen = msg->addr_width;
- ret = bcm_qspi_bspi_set_mode(qspi, io_width, addrlen, -1);
+ ret = bcm_qspi_bspi_set_mode(qspi, msg, -1);
if (!ret)
ret = bcm_qspi_bspi_flash_read(spi, msg);
@@ -1422,6 +1394,11 @@ static int __maybe_unused bcm_qspi_suspend(struct device *dev)
{
struct bcm_qspi *qspi = dev_get_drvdata(dev);
+ /* store the override strap value */
+ if (!bcm_qspi_bspi_ver_three(qspi))
+ qspi->s3_strap_override_ctrl =
+ bcm_qspi_read(qspi, BSPI, BSPI_STRAP_OVERRIDE_CTRL);
+
spi_master_suspend(qspi->master);
clk_disable(qspi->clk);
bcm_qspi_hw_uninit(qspi);
--
1.9.0.138.g2de3478
next reply other threads:[~2017-07-26 23:20 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-26 23:20 Kamal Dasu [this message]
2017-07-28 10:18 ` Applied "spi: bcm-qspi: Remove hardcoded settings and spi-nor.h dependency" to the spi tree Mark Brown
2017-07-28 10:18 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1501111215-2654-1-git-send-email-kdasu.kdev@gmail.com \
--to=kdasu.kdev@gmail.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=broonie@kernel.org \
--cc=cyrille.pitchen@atmel.com \
--cc=f.fainelli@gmail.com \
--cc=geert+renesas@glider.be \
--cc=hauke@hauke-m.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=rnd@arndb.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.