All of lore.kernel.org
 help / color / mirror / Atom feed
From: Abhishek Sahu <absahu@codeaurora.org>
To: Boris Brezillon <boris.brezillon@bootlin.com>
Cc: David Woodhouse <dwmw2@infradead.org>,
	Brian Norris <computersforpeace@gmail.com>,
	Marek Vasut <marek.vasut@gmail.com>,
	Richard Weinberger <richard@nod.at>,
	Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-mtd@lists.infradead.org, Andy Gross <andy.gross@linaro.org>,
	Archit Taneja <architt@codeaurora.org>,
	Abhishek Sahu <absahu@codeaurora.org>
Subject: [PATCH v3 14/16] mtd: rawnand: qcom: check for operation errors in case of raw read
Date: Fri, 25 May 2018 17:51:42 +0530	[thread overview]
Message-ID: <1527250904-21988-15-git-send-email-absahu@codeaurora.org> (raw)
In-Reply-To: <1527250904-21988-1-git-send-email-absahu@codeaurora.org>

Currently there is no error checking for raw read. For raw
reads, there won’t be any ECC failure but the operational
failures are possible, so schedule the NAND_FLASH_STATUS read
after each codeword.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
---
* Changes from v2:
  NONE

* Changes from v1:
 1. Removed the code for copy_last_cw.

 drivers/mtd/nand/raw/qcom_nandc.c | 58 +++++++++++++++++++++++++++------------
 1 file changed, 40 insertions(+), 18 deletions(-)

diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index f72bc8a..87f900e 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -1096,7 +1096,8 @@ static void config_nand_page_read(struct qcom_nand_controller *nandc)
  * Helper to prepare DMA descriptors for configuring registers
  * before reading each codeword in NAND page.
  */
-static void config_nand_cw_read(struct qcom_nand_controller *nandc)
+static void
+config_nand_cw_read(struct qcom_nand_controller *nandc, bool use_ecc)
 {
 	if (nandc->props->is_bam)
 		write_reg_dma(nandc, NAND_READ_LOCATION_0, 4,
@@ -1105,19 +1106,25 @@ static void config_nand_cw_read(struct qcom_nand_controller *nandc)
 	write_reg_dma(nandc, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL);
 	write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
 
-	read_reg_dma(nandc, NAND_FLASH_STATUS, 2, 0);
-	read_reg_dma(nandc, NAND_ERASED_CW_DETECT_STATUS, 1,
-		     NAND_BAM_NEXT_SGL);
+	if (use_ecc) {
+		read_reg_dma(nandc, NAND_FLASH_STATUS, 2, 0);
+		read_reg_dma(nandc, NAND_ERASED_CW_DETECT_STATUS, 1,
+			     NAND_BAM_NEXT_SGL);
+	} else {
+		read_reg_dma(nandc, NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL);
+	}
 }
 
 /*
  * Helper to prepare dma descriptors to configure registers needed for reading a
  * single codeword in page
  */
-static void config_nand_single_cw_page_read(struct qcom_nand_controller *nandc)
+static void
+config_nand_single_cw_page_read(struct qcom_nand_controller *nandc,
+				bool use_ecc)
 {
 	config_nand_page_read(nandc);
-	config_nand_cw_read(nandc);
+	config_nand_cw_read(nandc, use_ecc);
 }
 
 /*
@@ -1198,7 +1205,7 @@ static int nandc_param(struct qcom_nand_host *host)
 	nandc->buf_count = 512;
 	memset(nandc->data_buffer, 0xff, nandc->buf_count);
 
-	config_nand_single_cw_page_read(nandc);
+	config_nand_single_cw_page_read(nandc, false);
 
 	read_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer,
 		      nandc->buf_count, 0);
@@ -1563,6 +1570,23 @@ struct read_stats {
 	__le32 erased_cw;
 };
 
+/* reads back FLASH_STATUS register set by the controller */
+static int check_flash_errors(struct qcom_nand_host *host, int cw_cnt)
+{
+	struct nand_chip *chip = &host->chip;
+	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+	int i;
+
+	for (i = 0; i < cw_cnt; i++) {
+		u32 flash = le32_to_cpu(nandc->reg_read_buf[i]);
+
+		if (flash & (FS_OP_ERR | FS_MPU_ERR))
+			return -EIO;
+	}
+
+	return 0;
+}
+
 /*
  * reads back status registers set by the controller to notify page read
  * errors. this is equivalent to what 'ecc->correct()' would do.
@@ -1729,7 +1753,7 @@ static int read_page_ecc(struct qcom_nand_host *host, u8 *data_buf,
 			}
 		}
 
-		config_nand_cw_read(nandc);
+		config_nand_cw_read(nandc, true);
 
 		if (data_buf)
 			read_data_dma(nandc, FLASH_BUF_ACC, data_buf,
@@ -1839,7 +1863,7 @@ static int qcom_nandc_read_page_raw(struct mtd_info *mtd,
 			nandc_set_read_loc(nandc, 3, read_loc, oob_size2, 1);
 		}
 
-		config_nand_cw_read(nandc);
+		config_nand_cw_read(nandc, false);
 
 		read_data_dma(nandc, reg_off, data_buf, data_size1, 0);
 		reg_off += data_size1;
@@ -1858,12 +1882,13 @@ static int qcom_nandc_read_page_raw(struct mtd_info *mtd,
 	}
 
 	ret = submit_descs(nandc);
-	if (ret)
+	free_descs(nandc);
+	if (ret) {
 		dev_err(nandc->dev, "failure to read raw page\n");
+		return ret;
+	}
 
-	free_descs(nandc);
-
-	return ret;
+	return check_flash_errors(host, ecc->steps);
 }
 
 /* implements ecc->read_oob() */
@@ -2082,7 +2107,6 @@ static int qcom_nandc_block_bad(struct mtd_info *mtd, loff_t ofs)
 	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
 	struct nand_ecc_ctrl *ecc = &chip->ecc;
 	int page, ret, bbpos, bad = 0;
-	u32 flash_status;
 	u8 *bbm_bytes_buf = chip->data_buf;
 
 	page = (int)(ofs >> chip->page_shift) & chip->pagemask;
@@ -2109,7 +2133,7 @@ static int qcom_nandc_block_bad(struct mtd_info *mtd, loff_t ofs)
 	 * bbpos offset.
 	 */
 	nandc_set_read_loc(nandc, 0, bbpos, host->bbm_size, 1);
-	config_nand_single_cw_page_read(nandc);
+	config_nand_single_cw_page_read(nandc, host->use_ecc);
 	read_data_dma(nandc, FLASH_BUF_ACC + bbpos, bbm_bytes_buf,
 		      host->bbm_size, 0);
 
@@ -2120,9 +2144,7 @@ static int qcom_nandc_block_bad(struct mtd_info *mtd, loff_t ofs)
 		goto err;
 	}
 
-	flash_status = le32_to_cpu(nandc->reg_read_buf[0]);
-
-	if (flash_status & (FS_OP_ERR | FS_MPU_ERR)) {
+	if (check_flash_errors(host, 1)) {
 		dev_warn(nandc->dev, "error when trying to read BBM\n");
 		goto err;
 	}
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc.
is a member of Code Aurora Forum, hosted by The Linux Foundation

  parent reply	other threads:[~2018-05-25 12:21 UTC|newest]

Thread overview: 55+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-25 12:21 [PATCH v3 00/16] Update for QCOM NAND driver Abhishek Sahu
2018-05-25 12:21 ` [PATCH v3 01/16] mtd: rawnand: helper function for setting up ECC configuration Abhishek Sahu
2018-05-26  8:42   ` Miquel Raynal
2018-05-28  5:46     ` Abhishek Sahu
2018-06-07 12:37       ` Miquel Raynal
2018-06-11  9:16         ` Abhishek Sahu
2018-06-18 10:04           ` Miquel Raynal
2018-05-29 19:30     ` Boris Brezillon
2018-05-30  0:28       ` Masahiro Yamada
2018-05-30  6:21         ` Abhishek Sahu
2018-05-30  7:38           ` Masahiro Yamada
2018-05-30  8:53             ` Abhishek Sahu
2018-05-25 12:21 ` [PATCH v3 02/16] mtd: rawnand: denali: use helper function for ecc setup Abhishek Sahu
2018-05-27  9:26   ` Masahiro Yamada
2018-05-25 12:21 ` [PATCH v3 03/16] dt-bindings: qcom_nandc: make nand-ecc-strength optional Abhishek Sahu
2018-05-26  8:42   ` Miquel Raynal
2018-05-28  5:53     ` Abhishek Sahu
2018-05-25 12:21 ` [PATCH v3 04/16] dt-bindings: qcom_nandc: remove nand-ecc-step-size Abhishek Sahu
2018-05-25 12:21 ` [PATCH v3 05/16] mtd: rawnand: qcom: remove dt property nand-ecc-step-size Abhishek Sahu
2018-05-26  8:42   ` Miquel Raynal
2018-05-26  8:42     ` Miquel Raynal
2018-05-28  5:55     ` Abhishek Sahu
2018-05-25 12:21 ` [PATCH v3 06/16] mtd: rawnand: qcom: use the ecc strength from device parameter Abhishek Sahu
2018-05-26  8:43   ` Miquel Raynal
2018-05-28  6:01     ` Abhishek Sahu
2018-05-25 12:21 ` [PATCH v3 07/16] mtd: rawnand: qcom: wait for desc completion in all BAM channels Abhishek Sahu
2018-05-26  8:43   ` Miquel Raynal
2018-05-25 12:21 ` [PATCH v3 08/16] mtd: rawnand: qcom: erased page detection for uncorrectable errors only Abhishek Sahu
2018-05-25 12:21 ` [PATCH v3 09/16] mtd: rawnand: qcom: fix null pointer access for erased page detection Abhishek Sahu
2018-05-25 12:21 ` [PATCH v3 10/16] mtd: rawnand: qcom: parse read errors for read oob also Abhishek Sahu
2018-05-25 12:21 ` [PATCH v3 11/16] mtd: rawnand: qcom: modify write_oob to remove read codeword part Abhishek Sahu
2018-05-25 12:21 ` [PATCH v3 12/16] mtd: rawnand: qcom: fix return value for raw page read Abhishek Sahu
2018-05-26  8:43   ` Miquel Raynal
2018-05-25 12:21 ` [PATCH v3 13/16] mtd: rawnand: qcom: minor code reorganization for bad block check Abhishek Sahu
2018-05-26  8:46   ` Miquel Raynal
2018-05-28  6:12     ` Abhishek Sahu
2018-05-28  7:03       ` Miquel Raynal
2018-05-28 10:10         ` Abhishek Sahu
2018-05-28 10:10           ` Abhishek Sahu
2018-06-07 12:53           ` Miquel Raynal
2018-06-11 13:22             ` Abhishek Sahu
2018-06-18 11:35               ` Miquel Raynal
2018-06-20  7:04                 ` Abhishek Sahu
2018-06-20  7:04                   ` Abhishek Sahu
2018-05-26  8:58   ` Miquel Raynal
2018-05-28  6:16     ` Abhishek Sahu
2018-05-28  7:09       ` Miquel Raynal
2018-05-25 12:21 ` Abhishek Sahu [this message]
2018-05-26  8:58   ` [PATCH v3 14/16] mtd: rawnand: qcom: check for operation errors in case of raw read Miquel Raynal
2018-05-25 12:21 ` [PATCH v3 15/16] mtd: rawnand: qcom: helper function for " Abhishek Sahu
2018-05-27 13:53   ` Miquel Raynal
2018-05-28  7:34     ` Abhishek Sahu
2018-06-07 12:43       ` Miquel Raynal
2018-06-11  9:19         ` Abhishek Sahu
2018-05-25 12:21 ` [PATCH v3 16/16] mtd: rawnand: qcom: erased page bitflips detection Abhishek Sahu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1527250904-21988-15-git-send-email-absahu@codeaurora.org \
    --to=absahu@codeaurora.org \
    --cc=andy.gross@linaro.org \
    --cc=architt@codeaurora.org \
    --cc=boris.brezillon@bootlin.com \
    --cc=computersforpeace@gmail.com \
    --cc=cyrille.pitchen@wedev4u.fr \
    --cc=dwmw2@infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=marek.vasut@gmail.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=richard@nod.at \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.