All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Raju P.L.S.S.S.N" <rplsssn@codeaurora.org>
To: andy.gross@linaro.org, david.brown@linaro.org,
	linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org
Cc: rnayak@codeaurora.org, bjorn.andersson@linaro.org,
	linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
	sboyd@kernel.org, evgreen@chromium.org, dianders@chromium.org,
	mka@chromium.org, ilina@codeaurora.org,
	"Raju P.L.S.S.S.N" <rplsssn@codeaurora.org>
Subject: [PATCH v1 1/2] drivers: qcom: rpmh-rsc: clear active mode configuration for wake TCS
Date: Wed,  3 Oct 2018 15:26:34 +0530	[thread overview]
Message-ID: <1538560595-6275-2-git-send-email-rplsssn@codeaurora.org> (raw)
In-Reply-To: <1538560595-6275-1-git-send-email-rplsssn@codeaurora.org>

For RSCs that have sleep & wake TCS but no dedicated active TCS, wake
TCS can be re-purposed to send active requests. Once the active requests
are sent and response is received, the active mode configuration needs
to be cleared so that controller can use wake TCS for sending wake
requests.

Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
---
 drivers/soc/qcom/rpmh-rsc.c | 77 +++++++++++++++++++++++++++++++--------------
 1 file changed, 54 insertions(+), 23 deletions(-)

diff --git a/drivers/soc/qcom/rpmh-rsc.c b/drivers/soc/qcom/rpmh-rsc.c
index 75bd9a8..6cc7f21 100644
--- a/drivers/soc/qcom/rpmh-rsc.c
+++ b/drivers/soc/qcom/rpmh-rsc.c
@@ -201,6 +201,42 @@ static const struct tcs_request *get_req_from_tcs(struct rsc_drv *drv,
 	return NULL;
 }
 
+static void __tcs_trigger(struct rsc_drv *drv, int tcs_id, bool trigger)
+{
+	u32 enable;
+
+	/*
+	 * HW req: Clear the DRV_CONTROL and enable TCS again
+	 * While clearing ensure that the AMC mode trigger is cleared
+	 * and then the mode enable is cleared.
+	 */
+	enable = read_tcs_reg(drv, RSC_DRV_CONTROL, tcs_id, 0);
+	enable &= ~TCS_AMC_MODE_TRIGGER;
+	write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
+	enable &= ~TCS_AMC_MODE_ENABLE;
+	write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
+
+	if (trigger) {
+		/* Enable the AMC mode on the TCS and then trigger the TCS */
+		enable = TCS_AMC_MODE_ENABLE;
+		write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
+		enable |= TCS_AMC_MODE_TRIGGER;
+		write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
+	}
+}
+
+static inline void enable_tcs_irq(struct rsc_drv *drv, int tcs_id, bool enable)
+{
+	u32 data;
+
+	data = read_tcs_reg(drv, RSC_DRV_IRQ_ENABLE, 0, 0);
+	if (enable)
+		data |= BIT(tcs_id);
+	else
+		data &= ~BIT(tcs_id);
+	write_tcs_reg(drv, RSC_DRV_IRQ_ENABLE, 0, data);
+}
+
 /**
  * tcs_tx_done: TX Done interrupt handler
  */
@@ -237,6 +273,21 @@ static irqreturn_t tcs_tx_done(int irq, void *p)
 		}
 
 		trace_rpmh_tx_done(drv, i, req, err);
+
+		/*
+		 * if wake tcs was re-purposed for sending active
+		 * votes, clear AMC trigger & enable modes and
+		 * disable interrupt for this TCS
+		 */
+		if (!drv->tcs[ACTIVE_TCS].num_tcs) {
+			__tcs_trigger(drv, i, false);
+			/*
+			 * Disable interrupt for this TCS to avoid being
+			 * spammed with interrupts coming when the solver
+			 * sends its wake votes.
+			 */
+			enable_tcs_irq(drv, i, false);
+		}
 skip:
 		/* Reclaim the TCS */
 		write_tcs_reg(drv, RSC_DRV_CMD_ENABLE, i, 0);
@@ -285,28 +336,6 @@ static void __tcs_buffer_write(struct rsc_drv *drv, int tcs_id, int cmd_id,
 	write_tcs_reg(drv, RSC_DRV_CMD_ENABLE, tcs_id, cmd_enable);
 }
 
-static void __tcs_trigger(struct rsc_drv *drv, int tcs_id)
-{
-	u32 enable;
-
-	/*
-	 * HW req: Clear the DRV_CONTROL and enable TCS again
-	 * While clearing ensure that the AMC mode trigger is cleared
-	 * and then the mode enable is cleared.
-	 */
-	enable = read_tcs_reg(drv, RSC_DRV_CONTROL, tcs_id, 0);
-	enable &= ~TCS_AMC_MODE_TRIGGER;
-	write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
-	enable &= ~TCS_AMC_MODE_ENABLE;
-	write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
-
-	/* Enable the AMC mode on the TCS and then trigger the TCS */
-	enable = TCS_AMC_MODE_ENABLE;
-	write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
-	enable |= TCS_AMC_MODE_TRIGGER;
-	write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
-}
-
 static int check_for_req_inflight(struct rsc_drv *drv, struct tcs_group *tcs,
 				  const struct tcs_request *msg)
 {
@@ -377,10 +406,12 @@ static int tcs_write(struct rsc_drv *drv, const struct tcs_request *msg)
 
 	tcs->req[tcs_id - tcs->offset] = msg;
 	set_bit(tcs_id, drv->tcs_in_use);
+	if (msg->state == RPMH_ACTIVE_ONLY_STATE && tcs->type != ACTIVE_TCS)
+		enable_tcs_irq(drv, tcs_id, true);
 	spin_unlock(&drv->lock);
 
 	__tcs_buffer_write(drv, tcs_id, 0, msg);
-	__tcs_trigger(drv, tcs_id);
+	__tcs_trigger(drv, tcs_id, true);
 
 done_write:
 	spin_unlock_irqrestore(&tcs->lock, flags);
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of the Code Aurora Forum, hosted by The Linux Foundation.

  reply	other threads:[~2018-10-03  9:56 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-03  9:56 [PATCH v1 0/2] drivers/qcom/rpmh: program wakeup timer Raju P.L.S.S.S.N
2018-10-03  9:56 ` Raju P.L.S.S.S.N [this message]
2018-10-03  9:56 ` [PATCH v1 2/2] drivers: qcom: rpmh: write PDC data Raju P.L.S.S.S.N

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1538560595-6275-2-git-send-email-rplsssn@codeaurora.org \
    --to=rplsssn@codeaurora.org \
    --cc=andy.gross@linaro.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=david.brown@linaro.org \
    --cc=dianders@chromium.org \
    --cc=evgreen@chromium.org \
    --cc=ilina@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=mka@chromium.org \
    --cc=rnayak@codeaurora.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.