From: Vikash Garodia <vgarodia@codeaurora.org>
To: stanimir.varbanov@linaro.org, hverkuil@xs4all.nl, mchehab@kernel.org
Cc: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-msm@vger.kernel.org, acourbot@chromium.org,
vgarodia@codeaurora.org
Subject: [PATCH v12 2/5] venus: firmware: move load firmware in a separate function
Date: Wed, 17 Oct 2018 18:48:20 +0530 [thread overview]
Message-ID: <1539782303-4091-3-git-send-email-vgarodia@codeaurora.org> (raw)
In-Reply-To: <1539782303-4091-1-git-send-email-vgarodia@codeaurora.org>
Separate firmware loading part into a new function.
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
---
drivers/media/platform/qcom/venus/core.c | 4 +-
drivers/media/platform/qcom/venus/firmware.c | 55 ++++++++++++++++++----------
drivers/media/platform/qcom/venus/firmware.h | 2 +-
3 files changed, 38 insertions(+), 23 deletions(-)
diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
index bb6add9..75b9785 100644
--- a/drivers/media/platform/qcom/venus/core.c
+++ b/drivers/media/platform/qcom/venus/core.c
@@ -84,7 +84,7 @@ static void venus_sys_error_handler(struct work_struct *work)
pm_runtime_get_sync(core->dev);
- ret |= venus_boot(core->dev, core->res->fwname);
+ ret |= venus_boot(core);
ret |= hfi_core_resume(core, true);
@@ -284,7 +284,7 @@ static int venus_probe(struct platform_device *pdev)
if (ret < 0)
goto err_runtime_disable;
- ret = venus_boot(dev, core->res->fwname);
+ ret = venus_boot(core);
if (ret)
goto err_runtime_disable;
diff --git a/drivers/media/platform/qcom/venus/firmware.c b/drivers/media/platform/qcom/venus/firmware.c
index 0e21a90..1d4f066 100644
--- a/drivers/media/platform/qcom/venus/firmware.c
+++ b/drivers/media/platform/qcom/venus/firmware.c
@@ -60,20 +60,18 @@ int venus_set_hw_state(struct venus_core *core, bool resume)
return 0;
}
-int venus_boot(struct device *dev, const char *fwname)
+static int venus_load_fw(struct venus_core *core, const char *fwname,
+ phys_addr_t *mem_phys, size_t *mem_size)
{
const struct firmware *mdt;
struct device_node *node;
- phys_addr_t mem_phys;
+ struct device *dev;
struct resource r;
ssize_t fw_size;
- size_t mem_size;
void *mem_va;
int ret;
- if (!IS_ENABLED(CONFIG_QCOM_MDT_LOADER) || !qcom_scm_is_available())
- return -EPROBE_DEFER;
-
+ dev = core->dev;
node = of_parse_phandle(dev->of_node, "memory-region", 0);
if (!node) {
dev_err(dev, "no memory-region specified\n");
@@ -84,16 +82,16 @@ int venus_boot(struct device *dev, const char *fwname)
if (ret)
return ret;
- mem_phys = r.start;
- mem_size = resource_size(&r);
+ *mem_phys = r.start;
+ *mem_size = resource_size(&r);
- if (mem_size < VENUS_FW_MEM_SIZE)
+ if (*mem_size < VENUS_FW_MEM_SIZE)
return -EINVAL;
- mem_va = memremap(r.start, mem_size, MEMREMAP_WC);
+ mem_va = memremap(r.start, *mem_size, MEMREMAP_WC);
if (!mem_va) {
dev_err(dev, "unable to map memory region: %pa+%zx\n",
- &r.start, mem_size);
+ &r.start, *mem_size);
return -ENOMEM;
}
@@ -108,23 +106,40 @@ int venus_boot(struct device *dev, const char *fwname)
goto err_unmap;
}
- ret = qcom_mdt_load(dev, mdt, fwname, VENUS_PAS_ID, mem_va, mem_phys,
- mem_size, NULL);
+ if (core->use_tz)
+ ret = qcom_mdt_load(dev, mdt, fwname, VENUS_PAS_ID,
+ mem_va, *mem_phys, *mem_size, NULL);
+ else
+ ret = qcom_mdt_load_no_init(dev, mdt, fwname, VENUS_PAS_ID,
+ mem_va, *mem_phys, *mem_size, NULL);
release_firmware(mdt);
- if (ret)
- goto err_unmap;
-
- ret = qcom_scm_pas_auth_and_reset(VENUS_PAS_ID);
- if (ret)
- goto err_unmap;
-
err_unmap:
memunmap(mem_va);
return ret;
}
+int venus_boot(struct venus_core *core)
+{
+ struct device *dev = core->dev;
+ phys_addr_t mem_phys;
+ size_t mem_size;
+ int ret;
+
+ if (!IS_ENABLED(CONFIG_QCOM_MDT_LOADER) ||
+ (core->use_tz && !qcom_scm_is_available()))
+ return -EPROBE_DEFER;
+
+ ret = venus_load_fw(core, core->res->fwname, &mem_phys, &mem_size);
+ if (ret) {
+ dev_err(dev, "fail to load video firmware\n");
+ return -EINVAL;
+ }
+
+ return qcom_scm_pas_auth_and_reset(VENUS_PAS_ID);
+}
+
int venus_shutdown(struct device *dev)
{
return qcom_scm_pas_shutdown(VENUS_PAS_ID);
diff --git a/drivers/media/platform/qcom/venus/firmware.h b/drivers/media/platform/qcom/venus/firmware.h
index 397570c..1343747 100644
--- a/drivers/media/platform/qcom/venus/firmware.h
+++ b/drivers/media/platform/qcom/venus/firmware.h
@@ -16,7 +16,7 @@
struct device;
-int venus_boot(struct device *dev, const char *fwname);
+int venus_boot(struct venus_core *core);
int venus_shutdown(struct device *dev);
int venus_set_hw_state(struct venus_core *core, bool suspend);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2018-10-17 13:18 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-17 13:18 [PATCH v12 0/5] Venus updates - PIL Vikash Garodia
2018-10-17 13:18 ` [PATCH v12 1/5] venus: firmware: add routine to reset ARM9 Vikash Garodia
2018-10-17 13:18 ` Vikash Garodia [this message]
2018-10-17 13:18 ` [PATCH v12 3/5] venus: firmware: register separate platform_device for firmware loader Vikash Garodia
2018-10-17 13:18 ` [PATCH v12 4/5] venus: firmware: add no TZ boot and shutdown routine Vikash Garodia
2018-10-17 13:18 ` [PATCH v12 5/5] dt-bindings: media: Document bindings for venus firmware device Vikash Garodia
2018-10-17 14:10 ` [PATCH v12 0/5] Venus updates - PIL Stanimir Varbanov
2018-10-22 5:51 ` Alexandre Courbot
2018-10-22 11:11 ` Vikash Garodia
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1539782303-4091-3-git-send-email-vgarodia@codeaurora.org \
--to=vgarodia@codeaurora.org \
--cc=acourbot@chromium.org \
--cc=hverkuil@xs4all.nl \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=stanimir.varbanov@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.