From: biju.das@bp.renesas.com (Biju Das)
To: cip-dev@lists.cip-project.org
Subject: [cip-dev] [PATCH 03/10] arm64: dts: renesas: Add Si-Linux CAT874 board support
Date: Thu, 21 Mar 2019 16:22:12 +0000 [thread overview]
Message-ID: <1553185339-26890-4-git-send-email-biju.das@bp.renesas.com> (raw)
In-Reply-To: <1553185339-26890-1-git-send-email-biju.das@bp.renesas.com>
Basic support for the Si-Linux board based on RZ/G2E:
- Memory,
- Main crystal,
- Serial console
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(cherry picked from commit d828266bb19a901c14b9d5518043f3582629938f)
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
---
arch/arm64/boot/dts/renesas/Makefile | 1 +
arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts | 37 +++++++++++++++++++++++++
2 files changed, 38 insertions(+)
create mode 100644 arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 9e2394b..3744f8d 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -1,4 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb
dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb r8a7795-h3ulcb.dtb
dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-kf.dtb
dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-xs.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
new file mode 100644
index 0000000..6eababc
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Silicon Linux RZ/G2E 96board platform (CAT874)
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a774c0.dtsi"
+
+/ {
+ model = "Silicon Linux RZ/G2E 96board platform (CAT874)";
+ compatible = "si-linux,cat874", "renesas,r8a774c0";
+
+ aliases {
+ serial0 = &scif2;
+ };
+
+ chosen {
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory at 48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x0 0x78000000>;
+ };
+};
+
+&extal_clk {
+ clock-frequency = <48000000>;
+};
+
+&scif2 {
+ status = "okay";
+};
--
2.7.4
next prev parent reply other threads:[~2019-03-21 16:22 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-21 16:22 [cip-dev] [PATCH 00/10] Add basic RZ/G2E SoC/EK874 support Biju Das
2019-03-21 16:22 ` [cip-dev] [PATCH 01/10] dt-bindings: arm: Add si-linux cat87[45] boards Biju Das
2019-04-10 0:33 ` nobuhiro1.iwamatsu at toshiba.co.jp
2019-03-21 16:22 ` [cip-dev] [PATCH 02/10] arm64: dts: renesas: Initial device tree for r8a774c0 Biju Das
2019-03-21 16:22 ` Biju Das [this message]
2019-03-21 16:22 ` [cip-dev] [PATCH 04/10] arm64: dts: renesas: Add Si-Linux EK874 board support Biju Das
2019-03-21 16:22 ` [cip-dev] [PATCH 05/10] dmaengine: rcar-dmac: Document R8A774A1 bindings Biju Das
2019-03-21 16:22 ` [cip-dev] [PATCH 06/10] dmaengine: rcar-dmac: Document R8A774C0 bindings Biju Das
2019-03-21 16:22 ` [cip-dev] [PATCH 07/10] arm64: dts: renesas: r8a774c0: Add SYS-DMAC controller nodes Biju Das
2019-03-21 16:22 ` [cip-dev] [PATCH 08/10] dt-bindings: serial: sh-sci: Document r8a774a1 bindings Biju Das
2019-03-21 16:22 ` [cip-dev] [PATCH 09/10] dt-bindings: serial: sh-sci: Document r8a774c0 bindings Biju Das
2019-03-21 16:22 ` [cip-dev] [PATCH 10/10] arm64: dts: renesas: r8a774c0: Add SCIF and HSCIF nodes Biju Das
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1553185339-26890-4-git-send-email-biju.das@bp.renesas.com \
--to=biju.das@bp.renesas.com \
--cc=cip-dev@lists.cip-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.