From: fabrizio.castro@bp.renesas.com (Fabrizio Castro)
To: cip-dev@lists.cip-project.org
Subject: [cip-dev] [PATCH 4.19.y 00/17] Backport USB support for RZ/G2E
Date: Wed, 24 Apr 2019 18:20:23 +0100 [thread overview]
Message-ID: <1556126440-27978-1-git-send-email-fabrizio.castro@bp.renesas.com> (raw)
Dear All,
this series backports SoC specific USB Host 2.0/HSUSB/USB 3.0 DRD
support for the RZ/G2E (a.k.a. R8A774C0).
While at it, this series also cherry-picks some patches useful for
the RZ/G2M (a.k.a. R8A774A1).
Thanks,
Fab
Fabrizio Castro (11):
dt-bindings: rcar-gen3-phy-usb2: Add r8a774a1 support
dt-bindings: rcar-gen3-phy-usb2: Add r8a774c0 support
arm64: dts: renesas: r8a774c0: Add USB2.0 phy and host device nodes
usb: renesas_usbhs: add support for RZ/G2E
dt-bindings: usb: renesas_usbhs: Add r8a774c0 support
dt-bindings: dmaengine: usb-dmac: Add binding for r8a774c0
arm64: dts: renesas: r8a774c0: Add USB-DMAC and HSUSB device nodes
usb: gadget: udc: renesas_usb3: add support for r8a774c0
usb: gadget: udc: renesas_usb3: Add r8a774a1 support
usb: gadget: udc: renesas_usb3: Add bindings for r8a774c0
arm64: dts: renesas: r8a774c0: Add USB3.0 device nodes
Yoshihiro Shimoda (6):
usb: renesas_usbhs: Add reset_control
usb: renesas_usbhs: Add multiple clocks management
Revert "usb: renesas_usbhs: add extcon notifier to set mode for
non-otg channel"
dt-bindings: usb: renesas_usbhs: add clock-names property
usb: gadget: udc: renesas_usb3: add support for r8a77990
usb: gadget: udc: renesas_usb3: add a safety connection way for
forced_b_device
.../devicetree/bindings/dma/renesas,usb-dmac.txt | 1 +
.../devicetree/bindings/phy/rcar-gen3-phy-usb2.txt | 11 +-
.../devicetree/bindings/usb/renesas_usb3.txt | 6 +-
.../devicetree/bindings/usb/renesas_usbhs.txt | 7 +-
arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 104 +++++++++++++++++++
drivers/usb/gadget/udc/renesas_usb3.c | 30 +++++-
drivers/usb/renesas_usbhs/common.c | 113 +++++++++++++++++++--
drivers/usb/renesas_usbhs/common.h | 5 +-
drivers/usb/renesas_usbhs/rcar3.c | 11 --
9 files changed, 256 insertions(+), 32 deletions(-)
--
2.7.4
next reply other threads:[~2019-04-24 17:20 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-24 17:20 Fabrizio Castro [this message]
2019-04-24 17:20 ` [cip-dev] [PATCH 4.19.y 01/17] dt-bindings: rcar-gen3-phy-usb2: Add r8a774a1 support Fabrizio Castro
2019-04-24 17:20 ` [cip-dev] [PATCH 4.19.y 02/17] dt-bindings: rcar-gen3-phy-usb2: Add r8a774c0 support Fabrizio Castro
2019-04-24 17:20 ` [cip-dev] [PATCH 4.19.y 03/17] arm64: dts: renesas: r8a774c0: Add USB2.0 phy and host device nodes Fabrizio Castro
2019-04-24 17:20 ` [cip-dev] [PATCH 4.19.y 04/17] usb: renesas_usbhs: add support for RZ/G2E Fabrizio Castro
2019-04-24 17:20 ` [cip-dev] [PATCH 4.19.y 05/17] usb: renesas_usbhs: Add reset_control Fabrizio Castro
2019-04-24 17:20 ` [cip-dev] [PATCH 4.19.y 06/17] usb: renesas_usbhs: Add multiple clocks management Fabrizio Castro
2019-04-25 8:26 ` Pavel Machek
2019-04-24 17:20 ` [cip-dev] [PATCH 4.19.y 07/17] Revert "usb: renesas_usbhs: add extcon notifier to set mode for non-otg channel" Fabrizio Castro
2019-04-24 17:20 ` [cip-dev] [PATCH 4.19.y 08/17] dt-bindings: usb: renesas_usbhs: add clock-names property Fabrizio Castro
2019-04-24 17:20 ` [cip-dev] [PATCH 4.19.y 09/17] dt-bindings: usb: renesas_usbhs: Add r8a774c0 support Fabrizio Castro
2019-04-24 17:20 ` [cip-dev] [PATCH 4.19.y 10/17] dt-bindings: dmaengine: usb-dmac: Add binding for r8a774c0 Fabrizio Castro
2019-04-24 17:20 ` [cip-dev] [PATCH 4.19.y 11/17] arm64: dts: renesas: r8a774c0: Add USB-DMAC and HSUSB device nodes Fabrizio Castro
2019-04-24 17:20 ` [cip-dev] [PATCH 4.19.y 12/17] usb: gadget: udc: renesas_usb3: add support for r8a77990 Fabrizio Castro
2019-04-24 17:20 ` [cip-dev] [PATCH 4.19.y 13/17] usb: gadget: udc: renesas_usb3: add a safety connection way for forced_b_device Fabrizio Castro
2019-04-25 8:40 ` Pavel Machek
2019-04-24 17:20 ` [cip-dev] [PATCH 4.19.y 14/17] usb: gadget: udc: renesas_usb3: add support for r8a774c0 Fabrizio Castro
2019-04-24 17:20 ` [cip-dev] [PATCH 4.19.y 15/17] usb: gadget: udc: renesas_usb3: Add r8a774a1 support Fabrizio Castro
2019-04-24 17:20 ` [cip-dev] [PATCH 4.19.y 16/17] usb: gadget: udc: renesas_usb3: Add bindings for r8a774c0 Fabrizio Castro
2019-04-24 17:20 ` [cip-dev] [PATCH 4.19.y 17/17] arm64: dts: renesas: r8a774c0: Add USB3.0 device nodes Fabrizio Castro
2019-04-25 0:54 ` [cip-dev] [PATCH 4.19.y 00/17] Backport USB support for RZ/G2E nobuhiro1.iwamatsu at toshiba.co.jp
2019-04-25 8:11 ` Pavel Machek
2019-04-25 10:00 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1556126440-27978-1-git-send-email-fabrizio.castro@bp.renesas.com \
--to=fabrizio.castro@bp.renesas.com \
--cc=cip-dev@lists.cip-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.