From: biju.das@bp.renesas.com (Biju Das)
To: cip-dev@lists.cip-project.org
Subject: [cip-dev] [PATCH 4.19.y-cip 00/22] Add Watchdog/CMT/TMU/Thermal support
Date: Mon, 2 Sep 2019 16:57:34 +0100 [thread overview]
Message-ID: <1567439876-1886-1-git-send-email-biju.das@bp.renesas.com> (raw)
This patch series add Watchdog/CMT/TMU/Thermal support for hihope RZ/G2M platform.
This patch series is based on linux-4.19.y-cip and all the patches
in this series are cherry-picked from linux rc tree.
This patch series is depend on the below patch series
https://patchwork.kernel.org/project/cip-dev/list/?series=167529
Biju Das (5):
arm64: dts: renesas: hihope-common: Add RWDT support
arm64: dts: renesas: r8a774a1: Add CPU topology on r8a774a1 SoC
arm64: dts: renesas: r8a774a1: Add CPU capacity-dmips-mhz
arm64: dts: renesas: r8a774a1: Create thermal zone to support IPA
arm64: dts: renesas: r8a774a1: Add dynamic power coefficient
Fabrizio Castro (5):
watchdog: renesas_wdt: Fix typos
arm64: dts: renesas: r8a774a1: Add CMT device nodes
clk: renesas: r8a774a1: Add TMU clock
arm64: dts: renesas: r8a774a1: Add TMU device nodes
arm64: dts: renesas: r8a774a1: Add operating points
Hoan Nguyen An (2):
watchdog: renesas_wdt: Use 'dev' instead of dereferencing it
repeatedly
thermal: rcar_gen3_thermal: Fix init value of IRQCTL register
Jiada Wang (2):
thermal: rcar_gen3_thermal: fix interrupt type
thermal: rcar_gen3_thermal: Fix to show correct trip points number
Marek Vasut (1):
thermal: rcar_gen3_thermal: Register hwmon sysfs interface
Wolfram Sang (3):
watchdog: renesas_wdt: stop when unregistering
watchdog: renesas_wdt: don't keep timer value during suspend/resume
watchdog: renesas_wdt: drop superfluous glob pattern
Yoshihiro Kaneko (3):
thermal: rcar_gen3_thermal: Update value of Tj_1
thermal: rcar_gen3_thermal: Update calculation formula of IRQTEMP
thermal: rcar_gen3_thermal: Update temperature conversion method
Yoshihiro Shimoda (1):
watchdog: renesas_wdt: Add a few cycles delay
arch/arm64/boot/dts/renesas/hihope-common.dtsi | 5 +
arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 242 ++++++++++++++++++++++++-
drivers/clk/renesas/r8a774a1-cpg-mssr.c | 5 +
drivers/thermal/rcar_gen3_thermal.c | 146 ++++++++-------
drivers/watchdog/renesas_wdt.c | 54 +++---
5 files changed, 366 insertions(+), 86 deletions(-)
--
2.7.4
next reply other threads:[~2019-09-02 15:57 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-02 15:57 Biju Das [this message]
2019-09-02 15:57 ` [cip-dev] [PATCH 4.19.y-cip 01/22] watchdog: renesas_wdt: stop when unregistering Biju Das
2019-09-02 15:57 ` [cip-dev] [PATCH 4.19.y-cip 02/22] watchdog: renesas_wdt: Fix typos Biju Das
2019-09-02 15:57 ` [cip-dev] [PATCH 4.19.y-cip 03/22] watchdog: renesas_wdt: don't keep timer value during suspend/resume Biju Das
2019-09-02 15:57 ` [cip-dev] [PATCH 4.19.y-cip 04/22] watchdog: renesas_wdt: drop superfluous glob pattern Biju Das
2019-09-02 15:57 ` [cip-dev] [PATCH 4.19.y-cip 05/22] watchdog: renesas_wdt: Use 'dev' instead of dereferencing it repeatedly Biju Das
2019-09-02 15:57 ` [cip-dev] [PATCH 4.19.y-cip 06/22] watchdog: renesas_wdt: Add a few cycles delay Biju Das
2019-09-02 15:57 ` [cip-dev] [PATCH 4.19.y-cip 07/22] arm64: dts: renesas: hihope-common: Add RWDT support Biju Das
2019-09-02 15:57 ` [cip-dev] [PATCH 4.19.y-cip 08/22] arm64: dts: renesas: r8a774a1: Add CMT device nodes Biju Das
2019-09-02 15:57 ` [cip-dev] [PATCH 4.19.y-cip 09/22] clk: renesas: r8a774a1: Add TMU clock Biju Das
2019-09-02 15:57 ` [cip-dev] [PATCH 4.19.y-cip 10/22] arm64: dts: renesas: r8a774a1: Add TMU device nodes Biju Das
2019-09-02 15:57 ` [cip-dev] [PATCH 4.19.y-cip 11/22] thermal: rcar_gen3_thermal: Register hwmon sysfs interface Biju Das
2019-09-02 15:57 ` [cip-dev] [PATCH 4.19.y-cip 12/22] thermal: rcar_gen3_thermal: Fix init value of IRQCTL register Biju Das
2019-09-02 15:57 ` [cip-dev] [PATCH 4.19.y-cip 13/22] thermal: rcar_gen3_thermal: fix interrupt type Biju Das
2019-09-02 15:57 ` [cip-dev] [PATCH 4.19.y-cip 14/22] thermal: rcar_gen3_thermal: Fix to show correct trip points number Biju Das
2019-09-02 15:57 ` [cip-dev] [PATCH 4.19.y-cip 15/22] thermal: rcar_gen3_thermal: Update value of Tj_1 Biju Das
2019-09-02 15:57 ` [cip-dev] [PATCH 4.19.y-cip 16/22] thermal: rcar_gen3_thermal: Update calculation formula of IRQTEMP Biju Das
2019-09-02 15:57 ` [cip-dev] [PATCH 4.19.y-cip 17/22] thermal: rcar_gen3_thermal: Update temperature conversion method Biju Das
2019-09-02 15:57 ` [cip-dev] [PATCH 4.19.y-cip 18/22] arm64: dts: renesas: r8a774a1: Add operating points Biju Das
2019-09-02 15:57 ` [cip-dev] [PATCH 4.19.y-cip 19/22] arm64: dts: renesas: r8a774a1: Add CPU topology on r8a774a1 SoC Biju Das
2019-09-02 15:57 ` [cip-dev] [PATCH 4.19.y-cip 20/22] arm64: dts: renesas: r8a774a1: Add CPU capacity-dmips-mhz Biju Das
2019-09-02 15:57 ` [cip-dev] [PATCH 4.19.y-cip 21/22] arm64: dts: renesas: r8a774a1: Create thermal zone to support IPA Biju Das
2019-09-02 15:57 ` [cip-dev] [PATCH 4.19.y-cip 22/22] arm64: dts: renesas: r8a774a1: Add dynamic power coefficient Biju Das
2019-09-05 9:39 ` [cip-dev] [PATCH 4.19.y-cip 00/22] Add Watchdog/CMT/TMU/Thermal support nobuhiro1.iwamatsu at toshiba.co.jp
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1567439876-1886-1-git-send-email-biju.das@bp.renesas.com \
--to=biju.das@bp.renesas.com \
--cc=cip-dev@lists.cip-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.