All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lina Iyer <ilina@codeaurora.org>
To: swboyd@chromium.org, evgreen@chromium.org, maz@kernel.org,
	linus.walleij@linaro.org
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	bjorn.andersson@linaro.org, mkshah@codeaurora.org,
	linux-gpio@vger.kernel.org, Lina Iyer <ilina@codeaurora.org>
Subject: [PATCH RFC v2 04/14] drivers: irqchip: add PDC irqdomain for wakeup capable GPIOs
Date: Fri, 13 Sep 2019 15:59:12 -0600	[thread overview]
Message-ID: <1568411962-1022-5-git-send-email-ilina@codeaurora.org> (raw)
In-Reply-To: <1568411962-1022-1-git-send-email-ilina@codeaurora.org>

Introduce a new domain for wakeup capable GPIOs. The domain can be
requested using the bus token DOMAIN_BUS_WAKEUP. In the following
patches, we will specify PDC as the wakeup-parent for the TLMM GPIO
irqchip. Requesting a wakeup GPIO will setup the GPIO and the
corresponding PDC interrupt as its parent.

Co-developed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
---
Changes in RFC v2:
	- Move irq_domain_qcom_handle_wakeup to the patch where it is
	used
	- Replace #define definitons
	- Add Signed-off-by and other minor changes
---
 drivers/irqchip/qcom-pdc.c   | 104 +++++++++++++++++++++++++++++++++++++++----
 include/linux/soc/qcom/irq.h |  19 ++++++++
 2 files changed, 114 insertions(+), 9 deletions(-)
 create mode 100644 include/linux/soc/qcom/irq.h

diff --git a/drivers/irqchip/qcom-pdc.c b/drivers/irqchip/qcom-pdc.c
index 5eef5ea..4abd775 100644
--- a/drivers/irqchip/qcom-pdc.c
+++ b/drivers/irqchip/qcom-pdc.c
@@ -13,12 +13,13 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
+#include <linux/soc/qcom/irq.h>
 #include <linux/spinlock.h>
-#include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/types.h>
 
 #define PDC_MAX_IRQS		168
+#define PDC_MAX_GPIO_IRQS	256
 
 #define CLEAR_INTR(reg, intr)	(reg & ~(1 << intr))
 #define ENABLE_INTR(reg, intr)	(reg | (1 << intr))
@@ -26,6 +27,8 @@
 #define IRQ_ENABLE_BANK		0x10
 #define IRQ_i_CFG		0x110
 
+#define PDC_NO_PARENT_IRQ	~0UL
+
 struct pdc_pin_region {
 	u32 pin_base;
 	u32 parent_base;
@@ -65,23 +68,35 @@ static void pdc_enable_intr(struct irq_data *d, bool on)
 
 static void qcom_pdc_gic_disable(struct irq_data *d)
 {
+	if (d->hwirq == GPIO_NO_WAKE_IRQ)
+		return;
+
 	pdc_enable_intr(d, false);
 	irq_chip_disable_parent(d);
 }
 
 static void qcom_pdc_gic_enable(struct irq_data *d)
 {
+	if (d->hwirq == GPIO_NO_WAKE_IRQ)
+		return;
+
 	pdc_enable_intr(d, true);
 	irq_chip_enable_parent(d);
 }
 
 static void qcom_pdc_gic_mask(struct irq_data *d)
 {
+	if (d->hwirq == GPIO_NO_WAKE_IRQ)
+		return;
+
 	irq_chip_mask_parent(d);
 }
 
 static void qcom_pdc_gic_unmask(struct irq_data *d)
 {
+	if (d->hwirq == GPIO_NO_WAKE_IRQ)
+		return;
+
 	irq_chip_unmask_parent(d);
 }
 
@@ -124,6 +139,9 @@ static int qcom_pdc_gic_set_type(struct irq_data *d, unsigned int type)
 	int pin_out = d->hwirq;
 	enum pdc_irq_config_bits pdc_type;
 
+	if (pin_out == GPIO_NO_WAKE_IRQ)
+		return 0;
+
 	switch (type) {
 	case IRQ_TYPE_EDGE_RISING:
 		pdc_type = PDC_EDGE_RISING;
@@ -181,8 +199,7 @@ static irq_hw_number_t get_parent_hwirq(int pin)
 			return (region->parent_base + pin - region->pin_base);
 	}
 
-	WARN_ON(1);
-	return ~0UL;
+	return PDC_NO_PARENT_IRQ;
 }
 
 static int qcom_pdc_translate(struct irq_domain *d, struct irq_fwspec *fwspec,
@@ -211,17 +228,17 @@ static int qcom_pdc_alloc(struct irq_domain *domain, unsigned int virq,
 
 	ret = qcom_pdc_translate(domain, fwspec, &hwirq, &type);
 	if (ret)
-		return -EINVAL;
-
-	parent_hwirq = get_parent_hwirq(hwirq);
-	if (parent_hwirq == ~0UL)
-		return -EINVAL;
+		return ret;
 
 	ret  = irq_domain_set_hwirq_and_chip(domain, virq, hwirq,
 					     &qcom_pdc_gic_chip, NULL);
 	if (ret)
 		return ret;
 
+	parent_hwirq = get_parent_hwirq(hwirq);
+	if (parent_hwirq == PDC_NO_PARENT_IRQ)
+		return 0;
+
 	if (type & IRQ_TYPE_EDGE_BOTH)
 		type = IRQ_TYPE_EDGE_RISING;
 
@@ -244,6 +261,60 @@ static const struct irq_domain_ops qcom_pdc_ops = {
 	.free		= irq_domain_free_irqs_common,
 };
 
+static int qcom_pdc_gpio_alloc(struct irq_domain *domain, unsigned int virq,
+			       unsigned int nr_irqs, void *data)
+{
+	struct irq_fwspec *fwspec = data;
+	struct irq_fwspec parent_fwspec;
+	irq_hw_number_t hwirq, parent_hwirq;
+	unsigned int type;
+	int ret;
+
+	ret = qcom_pdc_translate(domain, fwspec, &hwirq, &type);
+	if (ret)
+		return ret;
+
+	ret = irq_domain_set_hwirq_and_chip(domain, virq, hwirq,
+					    &qcom_pdc_gic_chip, NULL);
+	if (ret)
+		return ret;
+
+	if (hwirq == GPIO_NO_WAKE_IRQ)
+		return 0;
+
+	parent_hwirq = get_parent_hwirq(hwirq);
+	if (parent_hwirq == PDC_NO_PARENT_IRQ)
+		return 0;
+
+	if (type & IRQ_TYPE_EDGE_BOTH)
+		type = IRQ_TYPE_EDGE_RISING;
+
+	if (type & IRQ_TYPE_LEVEL_MASK)
+		type = IRQ_TYPE_LEVEL_HIGH;
+
+	parent_fwspec.fwnode      = domain->parent->fwnode;
+	parent_fwspec.param_count = 3;
+	parent_fwspec.param[0]    = 0;
+	parent_fwspec.param[1]    = parent_hwirq;
+	parent_fwspec.param[2]    = type;
+
+	return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs,
+					    &parent_fwspec);
+}
+
+static int qcom_pdc_gpio_domain_select(struct irq_domain *d,
+				       struct irq_fwspec *fwspec,
+				       enum irq_domain_bus_token bus_token)
+{
+	return bus_token == DOMAIN_BUS_WAKEUP;
+}
+
+static const struct irq_domain_ops qcom_pdc_gpio_ops = {
+	.select		= qcom_pdc_gpio_domain_select,
+	.alloc		= qcom_pdc_gpio_alloc,
+	.free		= irq_domain_free_irqs_common,
+};
+
 static int pdc_setup_pin_mapping(struct device_node *np)
 {
 	int ret, n;
@@ -282,7 +353,7 @@ static int pdc_setup_pin_mapping(struct device_node *np)
 
 static int qcom_pdc_init(struct device_node *node, struct device_node *parent)
 {
-	struct irq_domain *parent_domain, *pdc_domain;
+	struct irq_domain *parent_domain, *pdc_domain, *pdc_gpio_domain;
 	int ret;
 
 	pdc_base = of_iomap(node, 0);
@@ -313,8 +384,23 @@ static int qcom_pdc_init(struct device_node *node, struct device_node *parent)
 		goto fail;
 	}
 
+	pdc_gpio_domain = irq_domain_create_hierarchy(parent_domain,
+						      IRQ_DOMAIN_FLAG_QCOM_PDC_WAKEUP,
+						      PDC_MAX_GPIO_IRQS,
+						      of_fwnode_handle(node),
+						      &qcom_pdc_gpio_ops, NULL);
+	if (!pdc_gpio_domain) {
+		pr_err("%pOF: PDC domain add failed for GPIO domain\n", node);
+		ret = -ENOMEM;
+		goto remove;
+	}
+
+	irq_domain_update_bus_token(pdc_gpio_domain, DOMAIN_BUS_WAKEUP);
+
 	return 0;
 
+remove:
+	irq_domain_remove(pdc_domain);
 fail:
 	kfree(pdc_region);
 	iounmap(pdc_base);
diff --git a/include/linux/soc/qcom/irq.h b/include/linux/soc/qcom/irq.h
new file mode 100644
index 0000000..85ac4b6
--- /dev/null
+++ b/include/linux/soc/qcom/irq.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __QCOM_IRQ_H
+#define __QCOM_IRQ_H
+
+#define GPIO_NO_WAKE_IRQ	~0U
+
+/**
+ * QCOM specific IRQ domain flags that distinguishes the handling of wakeup
+ * capable interrupts by different interrupt controllers.
+ *
+ * IRQ_DOMAIN_FLAG_QCOM_PDC_WAKEUP: Line must be masked at TLMM and the
+ *                                  interrupt configuration is done at PDC
+ * IRQ_DOMAIN_FLAG_QCOM_MPM_WAKEUP: Interrupt configuration is handled at TLMM
+ */
+#define IRQ_DOMAIN_FLAG_QCOM_PDC_WAKEUP		(IRQ_DOMAIN_FLAG_NONCORE << 0)
+#define IRQ_DOMAIN_FLAG_QCOM_MPM_WAKEUP		(IRQ_DOMAIN_FLAG_NONCORE << 1)
+
+#endif
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


  parent reply	other threads:[~2019-09-13 22:00 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-13 21:59 [PATCH RFC v2 00/14] Support wakeup capable GPIOs Lina Iyer
2019-09-13 21:59 ` [PATCH RFC v2 01/14] irqdomain: add bus token DOMAIN_BUS_WAKEUP Lina Iyer
2019-09-13 21:59 ` [PATCH RFC v2 02/14] drivers: irqchip: qcom-pdc: update max PDC interrupts Lina Iyer
2019-09-13 21:59 ` [PATCH RFC v2 03/14] drivers: irqchip: pdc: Do not toggle IRQ_ENABLE during mask/unmask Lina Iyer
2019-09-13 21:59 ` Lina Iyer [this message]
2019-11-08 21:21   ` [PATCH RFC v2 04/14] drivers: irqchip: add PDC irqdomain for wakeup capable GPIOs Doug Anderson
2019-11-08 21:54     ` Lina Iyer
2019-11-08 22:16       ` Lina Iyer
2019-11-08 22:57         ` Doug Anderson
2019-11-08 23:14           ` Lina Iyer
2019-09-13 21:59 ` [PATCH RFC v2 05/14] of: irq: document properties for wakeup interrupt parent Lina Iyer
2019-10-03 12:02   ` Linus Walleij
2019-10-03 12:02     ` Linus Walleij
2019-11-08 21:29   ` Doug Anderson
2019-09-13 21:59 ` [PATCH RFC v2 06/14] dt-bindings/interrupt-controller: pdc: add SPI config register Lina Iyer
2019-09-30 22:14   ` Rob Herring
2019-09-30 22:14     ` Rob Herring
2019-09-30 22:33   ` Stephen Boyd
2019-09-30 22:33     ` Stephen Boyd
2019-10-16  6:27     ` Stephen Boyd
2019-11-05 20:58       ` Lina Iyer
2019-11-06  0:53         ` Stephen Boyd
2019-11-11 18:37           ` Lina Iyer
2019-11-12 11:52             ` Marc Zyngier
2019-09-13 21:59 ` [PATCH RFC v2 07/14] drivers: irqchip: pdc: additionally set type in SPI config registers Lina Iyer
2019-09-13 21:59 ` [PATCH RFC v2 08/14] genirq: Introduce irq_chip_get/set_parent_state calls Lina Iyer
2019-09-13 21:59 ` [PATCH RFC v2 09/14] drivers: irqchip: pdc: Add irqchip set/get state calls Lina Iyer
2019-09-13 21:59 ` [PATCH RFC v2 10/14] drivers: pinctrl: msm: setup GPIO chip in hierarchy Lina Iyer
2019-10-03 12:17   ` Linus Walleij
2019-11-13 18:35     ` Lina Iyer
2019-09-13 21:59 ` [PATCH RFC v2 11/14] drivers: pinctrl: sdm845: add PDC wakeup interrupt map for GPIOs Lina Iyer
2019-10-03 12:18   ` Linus Walleij
2019-09-13 21:59 ` [PATCH RFC v2 12/14] arm64: dts: qcom: add PDC interrupt controller for SDM845 Lina Iyer
2019-09-13 21:59 ` [PATCH RFC v2 13/14] arm64: dts: qcom: setup PDC as the wakeup parent for TLMM on SDM845 Lina Iyer
2019-09-13 21:59 ` [PATCH RFC v2 14/14] arm64: defconfig: enable PDC interrupt controller for Qualcomm SDM845 Lina Iyer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1568411962-1022-5-git-send-email-ilina@codeaurora.org \
    --to=ilina@codeaurora.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=evgreen@chromium.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maz@kernel.org \
    --cc=mkshah@codeaurora.org \
    --cc=swboyd@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.