From: Elliot Berman <eberman@codeaurora.org>
To: bjorn.andersson@linaro.org, saiprakash.ranjan@codeaurora.org,
agross@kernel.org, swboyd@chromium.org
Cc: Elliot Berman <eberman@codeaurora.org>,
tsoni@codeaurora.org, sidgup@codeaurora.org,
psodagud@codeaurora.org, linux-arm-msm@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 07/18] firmware: qcom_scm-64: Add SCM results to descriptor
Date: Tue, 12 Nov 2019 13:22:43 -0800 [thread overview]
Message-ID: <1573593774-12539-8-git-send-email-eberman@codeaurora.org> (raw)
In-Reply-To: <1573593774-12539-1-git-send-email-eberman@codeaurora.org>
Remove knowledge of arm_smccc_res struct from client wrappers so that
client wrappers only work QCOM SCM data structures. SCM calls may have
up to 3 arguments, so qcom_scm_call_smccc is responsible now for filling
those 3 arguments accordingly.
Signed-off-by: Elliot Berman <eberman@codeaurora.org>
---
drivers/firmware/qcom_scm-64.c | 105 ++++++++++++++++++-----------------------
1 file changed, 45 insertions(+), 60 deletions(-)
diff --git a/drivers/firmware/qcom_scm-64.c b/drivers/firmware/qcom_scm-64.c
index e81fb6e..f0a5f24 100644
--- a/drivers/firmware/qcom_scm-64.c
+++ b/drivers/firmware/qcom_scm-64.c
@@ -50,6 +50,7 @@ struct qcom_scm_desc {
u32 cmd;
u32 arginfo;
u64 args[MAX_QCOM_SCM_ARGS];
+ u64 result[MAX_QCOM_SCM_RETS];
u32 owner;
};
@@ -115,8 +116,7 @@ static void qcom_scm_call_do_smccc(const struct qcom_scm_desc *desc,
}
static int ___qcom_scm_call_smccc(struct device *dev,
- const struct qcom_scm_desc *desc,
- struct arm_smccc_res *res, bool atomic)
+ struct qcom_scm_desc *desc, bool atomic)
{
int arglen = desc->arginfo & 0xf;
int i;
@@ -125,6 +125,7 @@ static int ___qcom_scm_call_smccc(struct device *dev,
void *args_virt = NULL;
size_t alloc_len;
gfp_t flag = atomic ? GFP_ATOMIC : GFP_KERNEL;
+ struct arm_smccc_res res;
if (unlikely(arglen > SMCCC_N_REG_ARGS)) {
alloc_len = SMCCC_N_EXT_ARGS * sizeof(u64);
@@ -158,15 +159,19 @@ static int ___qcom_scm_call_smccc(struct device *dev,
x5 = args_phys;
}
- qcom_scm_call_do_smccc(desc, res, x5, atomic);
+ qcom_scm_call_do_smccc(desc, &res, x5, atomic);
if (args_virt) {
dma_unmap_single(dev, args_phys, alloc_len, DMA_TO_DEVICE);
kfree(args_virt);
}
- if (res->a0 < 0)
- return qcom_scm_remap_error(res->a0);
+ desc->result[0] = res.a1;
+ desc->result[1] = res.a2;
+ desc->result[2] = res.a3;
+
+ if (res.a0 < 0)
+ return qcom_scm_remap_error(res.a0);
return 0;
}
@@ -181,11 +186,10 @@ static int ___qcom_scm_call_smccc(struct device *dev,
* Sends a command to the SCM and waits for the command to finish processing.
* This should *only* be called in pre-emptible context.
*/
-static int qcom_scm_call(struct device *dev, const struct qcom_scm_desc *desc,
- struct arm_smccc_res *res)
+static int qcom_scm_call(struct device *dev, struct qcom_scm_desc *desc)
{
might_sleep();
- return ___qcom_scm_call_smccc(dev, desc, res, false);
+ return ___qcom_scm_call_smccc(dev, desc, false);
}
/**
@@ -199,11 +203,9 @@ static int qcom_scm_call(struct device *dev, const struct qcom_scm_desc *desc,
* Sends a command to the SCM and waits for the command to finish processing.
* This can be called in atomic context.
*/
-static int qcom_scm_call_atomic(struct device *dev,
- const struct qcom_scm_desc *desc,
- struct arm_smccc_res *res)
+static int qcom_scm_call_atomic(struct device *dev, struct qcom_scm_desc *desc)
{
- return ___qcom_scm_call_smccc(dev, desc, res, true);
+ return ___qcom_scm_call_smccc(dev, desc, true);
}
/**
@@ -254,15 +256,14 @@ int __qcom_scm_is_call_available(struct device *dev, u32 svc_id, u32 cmd_id)
.cmd = QCOM_SCM_INFO_IS_CALL_AVAIL,
.owner = ARM_SMCCC_OWNER_SIP,
};
- struct arm_smccc_res res;
desc.arginfo = QCOM_SCM_ARGS(1);
desc.args[0] = SMCCC_FUNCNUM(svc_id, cmd_id) |
(ARM_SMCCC_OWNER_SIP << ARM_SMCCC_OWNER_SHIFT);
- ret = qcom_scm_call(dev, &desc, &res);
+ ret = qcom_scm_call(dev, &desc);
- return ret ? : res.a1;
+ return ret ? : desc.result[0];
}
int __qcom_scm_hdcp_req(struct device *dev, struct qcom_scm_hdcp_req *req,
@@ -274,7 +275,6 @@ int __qcom_scm_hdcp_req(struct device *dev, struct qcom_scm_hdcp_req *req,
.cmd = QCOM_SCM_HDCP_INVOKE,
.owner = ARM_SMCCC_OWNER_SIP,
};
- struct arm_smccc_res res;
if (req_cnt > QCOM_SCM_HDCP_MAX_REQ_CNT)
return -ERANGE;
@@ -291,8 +291,8 @@ int __qcom_scm_hdcp_req(struct device *dev, struct qcom_scm_hdcp_req *req,
desc.args[9] = req[4].val;
desc.arginfo = QCOM_SCM_ARGS(10);
- ret = qcom_scm_call(dev, &desc, &res);
- *resp = res.a1;
+ ret = qcom_scm_call(dev, &desc);
+ *resp = desc.result[0];
return ret;
}
@@ -324,14 +324,13 @@ bool __qcom_scm_pas_supported(struct device *dev, u32 peripheral)
.cmd = QCOM_SCM_PIL_PAS_IS_SUPPORTED,
.owner = ARM_SMCCC_OWNER_SIP,
};
- struct arm_smccc_res res;
desc.args[0] = peripheral;
desc.arginfo = QCOM_SCM_ARGS(1);
- ret = qcom_scm_call(dev, &desc, &res);
+ ret = qcom_scm_call(dev, &desc);
- return ret ? false : !!res.a1;
+ return ret ? false : !!desc.result[0];
}
int __qcom_scm_pas_init_image(struct device *dev, u32 peripheral,
@@ -343,15 +342,14 @@ int __qcom_scm_pas_init_image(struct device *dev, u32 peripheral,
.cmd = QCOM_SCM_PIL_PAS_INIT_IMAGE,
.owner = ARM_SMCCC_OWNER_SIP,
};
- struct arm_smccc_res res;
desc.args[0] = peripheral;
desc.args[1] = metadata_phys;
desc.arginfo = QCOM_SCM_ARGS(2, QCOM_SCM_VAL, QCOM_SCM_RW);
- ret = qcom_scm_call(dev, &desc, &res);
+ ret = qcom_scm_call(dev, &desc);
- return ret ? : res.a1;
+ return ret ? : desc.result[0];
}
int __qcom_scm_pas_mem_setup(struct device *dev, u32 peripheral,
@@ -363,16 +361,15 @@ int __qcom_scm_pas_mem_setup(struct device *dev, u32 peripheral,
.cmd = QCOM_SCM_PIL_PAS_MEM_SETUP,
.owner = ARM_SMCCC_OWNER_SIP,
};
- struct arm_smccc_res res;
desc.args[0] = peripheral;
desc.args[1] = addr;
desc.args[2] = size;
desc.arginfo = QCOM_SCM_ARGS(3);
- ret = qcom_scm_call(dev, &desc, &res);
+ ret = qcom_scm_call(dev, &desc);
- return ret ? : res.a1;
+ return ret ? : desc.result[0];
}
int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 peripheral)
@@ -383,14 +380,13 @@ int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 peripheral)
.cmd = QCOM_SCM_PIL_PAS_AUTH_AND_RESET,
.owner = ARM_SMCCC_OWNER_SIP,
};
- struct arm_smccc_res res;
desc.args[0] = peripheral;
desc.arginfo = QCOM_SCM_ARGS(1);
- ret = qcom_scm_call(dev, &desc, &res);
+ ret = qcom_scm_call(dev, &desc);
- return ret ? : res.a1;
+ return ret ? : desc.result[0];
}
int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral)
@@ -401,14 +397,13 @@ int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral)
.cmd = QCOM_SCM_PIL_PAS_SHUTDOWN,
.owner = ARM_SMCCC_OWNER_SIP,
};
- struct arm_smccc_res res;
desc.args[0] = peripheral;
desc.arginfo = QCOM_SCM_ARGS(1);
- ret = qcom_scm_call(dev, &desc, &res);
+ ret = qcom_scm_call(dev, &desc);
- return ret ? : res.a1;
+ return ret ? : desc.result[0];
}
int __qcom_scm_pas_mss_reset(struct device *dev, bool reset)
@@ -418,16 +413,15 @@ int __qcom_scm_pas_mss_reset(struct device *dev, bool reset)
.cmd = QCOM_SCM_PIL_PAS_MSS_RESET,
.owner = ARM_SMCCC_OWNER_SIP,
};
- struct arm_smccc_res res;
int ret;
desc.args[0] = reset;
desc.args[1] = 0;
desc.arginfo = QCOM_SCM_ARGS(2);
- ret = qcom_scm_call(dev, &desc, &res);
+ ret = qcom_scm_call(dev, &desc);
- return ret ? : res.a1;
+ return ret ? : desc.result[0];
}
int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
@@ -437,16 +431,15 @@ int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
.cmd = QCOM_SCM_BOOT_SET_REMOTE_STATE,
.owner = ARM_SMCCC_OWNER_SIP,
};
- struct arm_smccc_res res;
int ret;
desc.args[0] = state;
desc.args[1] = id;
desc.arginfo = QCOM_SCM_ARGS(2);
- ret = qcom_scm_call(dev, &desc, &res);
+ ret = qcom_scm_call(dev, &desc);
- return ret ? : res.a1;
+ return ret ? : desc.result[0];
}
int __qcom_scm_assign_mem(struct device *dev, phys_addr_t mem_region,
@@ -459,7 +452,6 @@ int __qcom_scm_assign_mem(struct device *dev, phys_addr_t mem_region,
.cmd = QCOM_SCM_MP_ASSIGN,
.owner = ARM_SMCCC_OWNER_SIP,
};
- struct arm_smccc_res res;
desc.args[0] = mem_region;
desc.args[1] = mem_sz;
@@ -473,9 +465,9 @@ int __qcom_scm_assign_mem(struct device *dev, phys_addr_t mem_region,
QCOM_SCM_RO, QCOM_SCM_VAL, QCOM_SCM_RO,
QCOM_SCM_VAL, QCOM_SCM_VAL);
- ret = qcom_scm_call(dev, &desc, &res);
+ ret = qcom_scm_call(dev, &desc);
- return ret ? : res.a1;
+ return ret ? : desc.result[0];
}
int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id, u32 spare)
@@ -485,16 +477,15 @@ int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id, u32 spare)
.cmd = QCOM_SCM_MP_RESTORE_SEC_CFG,
.owner = ARM_SMCCC_OWNER_SIP,
};
- struct arm_smccc_res res;
int ret;
desc.args[0] = device_id;
desc.args[1] = spare;
desc.arginfo = QCOM_SCM_ARGS(2);
- ret = qcom_scm_call(dev, &desc, &res);
+ ret = qcom_scm_call(dev, &desc);
- return ret ? : res.a1;
+ return ret ? : desc.result[0];
}
int __qcom_scm_iommu_secure_ptbl_size(struct device *dev, u32 spare,
@@ -505,18 +496,17 @@ int __qcom_scm_iommu_secure_ptbl_size(struct device *dev, u32 spare,
.cmd = QCOM_SCM_MP_IOMMU_SECURE_PTBL_SIZE,
.owner = ARM_SMCCC_OWNER_SIP,
};
- struct arm_smccc_res res;
int ret;
desc.args[0] = spare;
desc.arginfo = QCOM_SCM_ARGS(1);
- ret = qcom_scm_call(dev, &desc, &res);
+ ret = qcom_scm_call(dev, &desc);
if (size)
- *size = res.a1;
+ *size = desc.result[0];
- return ret ? : res.a2;
+ return ret ? : desc.result[1];
}
int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr, u32 size,
@@ -527,7 +517,6 @@ int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr, u32 size,
.cmd = QCOM_SCM_MP_IOMMU_SECURE_PTBL_INIT,
.owner = ARM_SMCCC_OWNER_SIP,
};
- struct arm_smccc_res res;
int ret;
desc.args[0] = addr;
@@ -536,7 +525,7 @@ int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr, u32 size,
desc.arginfo = QCOM_SCM_ARGS(3, QCOM_SCM_RW, QCOM_SCM_VAL,
QCOM_SCM_VAL);
- ret = qcom_scm_call(dev, &desc, &res);
+ ret = qcom_scm_call(dev, &desc);
/* the pg table has been initialized already, ignore the error */
if (ret == -EPERM)
@@ -552,13 +541,12 @@ int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
.cmd = QCOM_SCM_BOOT_SET_DLOAD_MODE,
.owner = ARM_SMCCC_OWNER_SIP,
};
- struct arm_smccc_res res;
desc.args[0] = QCOM_SCM_BOOT_SET_DLOAD_MODE;
desc.args[1] = enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0;
desc.arginfo = QCOM_SCM_ARGS(2);
- return qcom_scm_call(dev, &desc, &res);
+ return qcom_scm_call(dev, &desc);
}
int __qcom_scm_io_readl(struct device *dev, phys_addr_t addr,
@@ -569,15 +557,14 @@ int __qcom_scm_io_readl(struct device *dev, phys_addr_t addr,
.cmd = QCOM_SCM_IO_READ,
.owner = ARM_SMCCC_OWNER_SIP,
};
- struct arm_smccc_res res;
int ret;
desc.args[0] = addr;
desc.arginfo = QCOM_SCM_ARGS(1);
- ret = qcom_scm_call(dev, &desc, &res);
+ ret = qcom_scm_call(dev, &desc);
if (ret >= 0)
- *val = res.a1;
+ *val = desc.result[0];
return ret < 0 ? ret : 0;
}
@@ -589,13 +576,12 @@ int __qcom_scm_io_writel(struct device *dev, phys_addr_t addr, unsigned int val)
.cmd = QCOM_SCM_IO_WRITE,
.owner = ARM_SMCCC_OWNER_SIP,
};
- struct arm_smccc_res res;
desc.args[0] = addr;
desc.args[1] = val;
desc.arginfo = QCOM_SCM_ARGS(2);
- return qcom_scm_call(dev, &desc, &res);
+ return qcom_scm_call(dev, &desc);
}
int __qcom_scm_qsmmu500_wait_safe_toggle(struct device *dev, bool en)
@@ -605,11 +591,10 @@ int __qcom_scm_qsmmu500_wait_safe_toggle(struct device *dev, bool en)
.cmd = QCOM_SCM_SMMU_CONFIG_ERRATA1,
.owner = ARM_SMCCC_OWNER_SIP,
};
- struct arm_smccc_res res;
desc.args[0] = QCOM_SCM_SMMU_CONFIG_ERRATA1_CLIENT_ALL;
desc.args[1] = en;
desc.arginfo = QCOM_SCM_ARGS(2);
- return qcom_scm_call_atomic(dev, &desc, &res);
+ return qcom_scm_call_atomic(dev, &desc);
}
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2019-11-12 21:24 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-12 21:22 [PATCH v2 00/18] Restructure, improve target support for qcom_scm driver Elliot Berman
2019-11-12 21:22 ` [PATCH v2 01/18] firmware: qcom_scm: Rename macros and structures Elliot Berman
2019-11-15 23:27 ` Stephen Boyd
2019-11-16 1:19 ` eberman
2019-11-19 21:47 ` Stephen Boyd
2019-11-12 21:22 ` [PATCH v2 02/18] firmware: qcom_scm: Add funcnum IDs Elliot Berman
2019-11-15 23:30 ` Stephen Boyd
2019-11-12 21:22 ` [PATCH v2 03/18] firmware: qcom_scm-64: Make SMCCC macros less magical Elliot Berman
2019-11-15 22:43 ` Stephen Boyd
2019-11-12 21:22 ` [PATCH v2 04/18] firmware: qcom_scm: Apply consistent naming scheme to command IDs Elliot Berman
2019-11-15 22:45 ` Stephen Boyd
2019-11-12 21:22 ` [PATCH v2 05/18] firmware: qcom_scm: Remove unused qcom_scm_get_version Elliot Berman
2019-11-15 22:45 ` Stephen Boyd
2019-11-12 21:22 ` [PATCH v2 06/18] firmware: qcom_scm-64: Move svc/cmd/owner into qcom_scm_desc Elliot Berman
2019-11-15 23:40 ` Stephen Boyd
2019-11-12 21:22 ` Elliot Berman [this message]
2019-11-15 23:42 ` [PATCH v2 07/18] firmware: qcom_scm-64: Add SCM results to descriptor Stephen Boyd
2019-11-12 21:22 ` [PATCH v2 08/18] firmware: qcom_scm-64: Remove qcom_scm_call_do_smccc Elliot Berman
2019-11-15 23:45 ` Stephen Boyd
2019-11-12 21:22 ` [PATCH v2 09/18] firmware: qcom_scm-64: Move SMC register filling to qcom_scm_call_smccc Elliot Berman
2019-11-15 23:57 ` Stephen Boyd
2019-11-12 21:22 ` [PATCH v2 10/18] firmware: qcom_scm-64: Improve SMC convention detection Elliot Berman
2019-11-16 0:21 ` Stephen Boyd
2019-11-16 1:29 ` eberman
2019-11-19 21:49 ` Stephen Boyd
2019-11-12 21:22 ` [PATCH v2 11/18] firmware: qcom_scm-32: Use SMC arch wrappers Elliot Berman
2019-11-16 0:41 ` Stephen Boyd
2019-12-12 19:45 ` Elliot Berman
2019-11-12 21:22 ` [PATCH v2 12/18] firmware: qcom_scm-32: Use qcom_scm_desc in non-atomic calls Elliot Berman
2019-11-19 22:03 ` Stephen Boyd
2019-11-12 21:22 ` [PATCH v2 13/18] firmware: qcom_scm-32: Move SMCCC register filling to qcom_scm_call Elliot Berman
2019-11-19 22:05 ` Stephen Boyd
2019-11-12 21:22 ` [PATCH v2 14/18] firmware: qcom_scm-32: Create common legacy atomic call Elliot Berman
2019-11-19 22:11 ` Stephen Boyd
2019-11-12 21:22 ` [PATCH v2 15/18] firmware: qcom_scm-32: Add device argument to atomic calls Elliot Berman
2019-11-19 22:13 ` Stephen Boyd
2019-11-12 21:22 ` [PATCH v2 16/18] firmware: qcom_scm: Remove thin wrappers Elliot Berman
2019-11-12 21:22 ` [PATCH v2 17/18] firmware: qcom_scm: Dynamically support SMCCC and legacy conventions Elliot Berman
2019-11-12 21:22 ` [PATCH v2 18/18] firmware: qcom_scm: Order functions, definitions by service/command Elliot Berman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1573593774-12539-8-git-send-email-eberman@codeaurora.org \
--to=eberman@codeaurora.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=psodagud@codeaurora.org \
--cc=saiprakash.ranjan@codeaurora.org \
--cc=sidgup@codeaurora.org \
--cc=swboyd@chromium.org \
--cc=tsoni@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.