From: prabhakar.mahadev-lad.rj@bp.renesas.com (Lad Prabhakar)
To: cip-dev@lists.cip-project.org
Subject: [cip-dev] [PATCH 4.19.y-cip 00/12] Renesas RZ/G2E backport IPA support along with minor fixes
Date: Thu, 16 Jan 2020 15:11:10 +0000 [thread overview]
Message-ID: <1579187482-4626-1-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com> (raw)
This patch series intends to do the following:
1: Add IPA support
2: Update the CAN bindings
3: Fix display node range
4: Minor tweaks for sorting the nodes
5: Use any protocol available in kernel for ip instead of dhcp
6: Cleanup CPU compatibles
This patch series is based on linux-4.19.y-cip and all the patches in this
series are cherry-picked from upstream.
Biju Das (2):
arm64: dts: renesas: r8a774c0: Create thermal zone to support IPA
arm64: dts: renesas: r8a774c0: Add dynamic power coefficient
Eugeniu Rosca (1):
dt-bindings: can: rcar_can: document r8a77965 support
Fabrizio Castro (3):
dt-bindings: can: rcar_can: Complete documentation for RZ/G2[EM]
arm64: dts: renesas: r8a774c0: Add missing assigned-clocks for CAN[01]
arm64: dts: renesas: r8a774c0: cat874: Add definition for 12V
regulator
Geert Uytterhoeven (1):
arm64: dts: renesas: r8a774c0: Fix register range of display node
Jacopo Mondi (1):
arm64: dts: renesas: Update 'vsps' properties for readability
Magnus Damm (1):
arm64: dts: renesas: Use ip=on for bootargs
Robin Murphy (1):
arm64: dts: renesas: r8a774c0: Clean up CPU compatibles
Yoshihiro Kaneko (2):
thermal: rcar_thermal: update calculation formula for R-Car Gen3 SoCs
arm64: dts: renesas: r8a774c0: cat874: Sort nodes
.../devicetree/bindings/net/can/rcar_can.txt | 9 +++--
arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts | 39 +++++++++++++---------
arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 36 +++++++++++++++-----
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 2 +-
arch/arm64/boot/dts/renesas/r8a77965.dtsi | 2 +-
arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 2 +-
arch/arm64/boot/dts/renesas/r8a77995.dtsi | 2 +-
arch/arm64/boot/dts/renesas/salvator-common.dtsi | 2 +-
drivers/thermal/rcar_thermal.c | 11 +++++-
9 files changed, 70 insertions(+), 35 deletions(-)
--
2.7.4
next reply other threads:[~2020-01-16 15:11 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-16 15:11 Lad Prabhakar [this message]
2020-01-16 15:11 ` [cip-dev] [PATCH 4.19.y-cip 01/12] dt-bindings: can: rcar_can: document r8a77965 support Lad Prabhakar
2020-01-16 15:11 ` [cip-dev] [PATCH 4.19.y-cip 02/12] dt-bindings: can: rcar_can: Complete documentation for RZ/G2[EM] Lad Prabhakar
2020-01-16 15:11 ` [cip-dev] [PATCH 4.19.y-cip 03/12] thermal: rcar_thermal: update calculation formula for R-Car Gen3 SoCs Lad Prabhakar
2020-01-16 15:11 ` [cip-dev] [PATCH 4.19.y-cip 04/12] arm64: dts: renesas: r8a774c0: Create thermal zone to support IPA Lad Prabhakar
2020-01-16 15:11 ` [cip-dev] [PATCH 4.19.y-cip 05/12] arm64: dts: renesas: r8a774c0: Add dynamic power coefficient Lad Prabhakar
2020-01-16 15:11 ` [cip-dev] [PATCH 4.19.y-cip 06/12] arm64: dts: renesas: r8a774c0: Clean up CPU compatibles Lad Prabhakar
2020-01-16 15:11 ` [cip-dev] [PATCH 4.19.y-cip 07/12] arm64: dts: renesas: r8a774c0: Add missing assigned-clocks for CAN[01] Lad Prabhakar
2020-01-16 15:11 ` [cip-dev] [PATCH 4.19.y-cip 08/12] arm64: dts: renesas: r8a774c0: Fix register range of display node Lad Prabhakar
2020-01-16 15:11 ` [cip-dev] [PATCH 4.19.y-cip 09/12] arm64: dts: renesas: Update 'vsps' properties for readability Lad Prabhakar
2020-01-16 15:11 ` [cip-dev] [PATCH 4.19.y-cip 10/12] arm64: dts: renesas: r8a774c0: cat874: Add definition for 12V regulator Lad Prabhakar
2020-01-16 15:29 ` Pavel Machek
2020-01-16 19:37 ` Prabhakar Mahadev Lad
2020-01-16 15:11 ` [cip-dev] [PATCH 4.19.y-cip 11/12] arm64: dts: renesas: Use ip=on for bootargs Lad Prabhakar
2020-01-16 15:11 ` [cip-dev] [PATCH 4.19.y-cip 12/12] arm64: dts: renesas: r8a774c0: cat874: Sort nodes Lad Prabhakar
2020-01-16 15:25 ` [cip-dev] [PATCH 4.19.y-cip 00/12] Renesas RZ/G2E backport IPA support along with minor fixes Pavel Machek
2020-01-20 1:46 ` nobuhiro1.iwamatsu at toshiba.co.jp
2020-01-20 9:47 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1579187482-4626-1-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com \
--to=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=cip-dev@lists.cip-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.