All of lore.kernel.org
 help / color / mirror / Atom feed
From: Maulik Shah <mkshah@codeaurora.org>
To: swboyd@chromium.org, mka@chromium.org, evgreen@chromium.org,
	bjorn.andersson@linaro.org
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	agross@kernel.org, dianders@chromium.org, rnayak@codeaurora.org,
	ilina@codeaurora.org, lsrao@codeaurora.org,
	Maulik Shah <mkshah@codeaurora.org>
Subject: [PATCH v9 3/3] soc: qcom: rpmh: Invoke rpmh_flush() for dirty caches
Date: Fri, 28 Feb 2020 17:08:23 +0530	[thread overview]
Message-ID: <1582889903-12890-4-git-send-email-mkshah@codeaurora.org> (raw)
In-Reply-To: <1582889903-12890-1-git-send-email-mkshah@codeaurora.org>

Add changes to invoke rpmh flush() from within cache_lock when the data
in cache is dirty.

This is done only if OSI is not supported in PSCI. If OSI is supported
rpmh_flush can get invoked when the last cpu going to power collapse
deepest low power mode.

Also remove "depends on COMPILE_TEST" for Kconfig option QCOM_RPMH so the
driver is only compiled for arm64 which supports psci_has_osi_support()
API.

Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Srinivas Rao L <lsrao@codeaurora.org>
---
 drivers/soc/qcom/Kconfig |  2 +-
 drivers/soc/qcom/rpmh.c  | 33 ++++++++++++++++++++++-----------
 2 files changed, 23 insertions(+), 12 deletions(-)

diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index d0a73e7..2e581bc 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -105,7 +105,7 @@ config QCOM_RMTFS_MEM
 
 config QCOM_RPMH
 	bool "Qualcomm RPM-Hardened (RPMH) Communication"
-	depends on ARCH_QCOM && ARM64 || COMPILE_TEST
+	depends on ARCH_QCOM && ARM64
 	help
 	  Support for communication with the hardened-RPM blocks in
 	  Qualcomm Technologies Inc (QTI) SoCs. RPMH communication uses an
diff --git a/drivers/soc/qcom/rpmh.c b/drivers/soc/qcom/rpmh.c
index f28afe4..6a5a60c 100644
--- a/drivers/soc/qcom/rpmh.c
+++ b/drivers/soc/qcom/rpmh.c
@@ -12,6 +12,7 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
+#include <linux/psci.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/types.h>
@@ -158,6 +159,13 @@ static struct cache_req *cache_rpm_request(struct rpmh_ctrlr *ctrlr,
 	}
 
 unlock:
+	if (ctrlr->dirty && !psci_has_osi_support()) {
+		if (rpmh_flush(ctrlr)) {
+			spin_unlock_irqrestore(&ctrlr->cache_lock, flags);
+			return ERR_PTR(-EINVAL);
+		}
+	}
+
 	spin_unlock_irqrestore(&ctrlr->cache_lock, flags);
 
 	return req;
@@ -285,26 +293,35 @@ int rpmh_write(const struct device *dev, enum rpmh_state state,
 }
 EXPORT_SYMBOL(rpmh_write);
 
-static void cache_batch(struct rpmh_ctrlr *ctrlr, struct batch_cache_req *req)
+static int cache_batch(struct rpmh_ctrlr *ctrlr, struct batch_cache_req *req)
 {
 	unsigned long flags;
 
 	spin_lock_irqsave(&ctrlr->cache_lock, flags);
+
 	list_add_tail(&req->list, &ctrlr->batch_cache);
 	ctrlr->dirty = true;
+
+	if (!psci_has_osi_support()) {
+		if (rpmh_flush(ctrlr)) {
+			spin_unlock_irqrestore(&ctrlr->cache_lock, flags);
+			return -EINVAL;
+		}
+	}
+
 	spin_unlock_irqrestore(&ctrlr->cache_lock, flags);
+
+	return 0;
 }
 
 static int flush_batch(struct rpmh_ctrlr *ctrlr)
 {
 	struct batch_cache_req *req;
 	const struct rpmh_request *rpm_msg;
-	unsigned long flags;
 	int ret = 0;
 	int i;
 
 	/* Send Sleep/Wake requests to the controller, expect no response */
-	spin_lock_irqsave(&ctrlr->cache_lock, flags);
 	list_for_each_entry(req, &ctrlr->batch_cache, list) {
 		for (i = 0; i < req->count; i++) {
 			rpm_msg = req->rpm_msgs + i;
@@ -314,7 +331,6 @@ static int flush_batch(struct rpmh_ctrlr *ctrlr)
 				break;
 		}
 	}
-	spin_unlock_irqrestore(&ctrlr->cache_lock, flags);
 
 	return ret;
 }
@@ -386,10 +402,8 @@ int rpmh_write_batch(const struct device *dev, enum rpmh_state state,
 		cmd += n[i];
 	}
 
-	if (state != RPMH_ACTIVE_ONLY_STATE) {
-		cache_batch(ctrlr, req);
-		return 0;
-	}
+	if (state != RPMH_ACTIVE_ONLY_STATE)
+		return cache_batch(ctrlr, req);
 
 	for (i = 0; i < count; i++) {
 		struct completion *compl = &compls[i];
@@ -455,9 +469,6 @@ static int send_single(struct rpmh_ctrlr *ctrlr, enum rpmh_state state,
  * Return: -EBUSY if the controller is busy, probably waiting on a response
  * to a RPMH request sent earlier.
  *
- * This function is always called from the sleep code from the last CPU
- * that is powering down the entire system. Since no other RPMH API would be
- * executing at this time, it is safe to run lockless.
  */
 int rpmh_flush(struct rpmh_ctrlr *ctrlr)
 {
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

  parent reply	other threads:[~2020-02-28 11:39 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-28 11:38 [PATCH v9 0/3] Invoke rpmh_flush for non OSI targets Maulik Shah
2020-02-28 11:38 ` [PATCH v9 1/3] arm64: dts: qcom: sc7180: Add cpuidle low power states Maulik Shah
2020-02-28 11:38 ` [PATCH v9 2/3] soc: qcom: rpmh: Update dirty flag only when data changes Maulik Shah
2020-02-28 21:50   ` Evan Green
2020-03-02 11:38     ` Maulik Shah
2020-02-28 11:38 ` Maulik Shah [this message]
2020-02-28 21:48   ` [PATCH v9 3/3] soc: qcom: rpmh: Invoke rpmh_flush() for dirty caches Evan Green
2020-03-03  5:48     ` Maulik Shah
2020-02-28 23:45   ` Doug Anderson
2020-03-03  5:47     ` Maulik Shah
2020-03-04  0:40       ` Doug Anderson
2020-03-05  9:41         ` Maulik Shah
2020-03-05 22:18           ` Doug Anderson
2020-03-10  9:11             ` Maulik Shah

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1582889903-12890-4-git-send-email-mkshah@codeaurora.org \
    --to=mkshah@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=dianders@chromium.org \
    --cc=evgreen@chromium.org \
    --cc=ilina@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lsrao@codeaurora.org \
    --cc=mka@chromium.org \
    --cc=rnayak@codeaurora.org \
    --cc=swboyd@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.