From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
To: Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>,
Rob Herring <robh+dt@kernel.org>
Cc: linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Prabhakar <prabhakar.csengg@gmail.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: [PATCH 1/3] ARM: dts: r8a7742-iwg21d-q7: Enable HSUSB, USB2.0 and XHCI
Date: Wed, 27 May 2020 21:23:31 +0100 [thread overview]
Message-ID: <1590611013-26029-2-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com> (raw)
In-Reply-To: <1590611013-26029-1-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com>
Enable support for HSUB, USB2.0 and xhci on iWave RZ/G1H carrier board.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
---
arch/arm/boot/dts/r8a7742-iwg21d-q7.dts | 51 +++++++++++++++++++++++++++++++++
1 file changed, 51 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
index f23c2ba..f62485a 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
@@ -61,6 +61,32 @@
};
};
+&hsusb {
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&pci0 {
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+ /* Disable hsusb to enable USB2.0 host mode support */
+ /* status = "okay"; */
+};
+
+&pci1 {
+ pinctrl-0 = <&usb1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&pci2 {
+ pinctrl-0 = <&usb2_pins>;
+ pinctrl-names = "default";
+ /* Disable xhci to enable USB2.0 host mode support */
+ /* status = "okay"; */
+};
+
&pfc {
avb_pins: avb {
groups = "avb_mdio", "avb_gmii";
@@ -88,6 +114,21 @@
function = "sdhi2";
power-source = <1800>;
};
+
+ usb0_pins: usb0 {
+ groups = "usb0";
+ function = "usb0";
+ };
+
+ usb1_pins: usb1 {
+ groups = "usb1";
+ function = "usb1";
+ };
+
+ usb2_pins: usb2 {
+ groups = "usb2";
+ function = "usb2";
+ };
};
&rwdt {
@@ -122,3 +163,13 @@
sd-uhs-sdr50;
status = "okay";
};
+
+&usbphy {
+ status = "okay";
+};
+
+&xhci {
+ pinctrl-0 = <&usb2_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
--
2.7.4
next prev parent reply other threads:[~2020-05-27 20:24 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-27 20:23 [PATCH 0/3] iW-RainboW-G21D-Qseven enable HSUSB, USB2.0, XHCI and Sound Lad Prabhakar
2020-05-27 20:23 ` Lad Prabhakar [this message]
2020-05-28 9:36 ` [PATCH 1/3] ARM: dts: r8a7742-iwg21d-q7: Enable HSUSB, USB2.0 and XHCI Sergei Shtylyov
2020-05-29 14:03 ` Geert Uytterhoeven
2020-05-27 20:23 ` [PATCH 2/3] ARM: dts: r8a7742-iwg21d-q7: Enable SGTL5000 audio codec Lad Prabhakar
2020-05-29 14:35 ` Geert Uytterhoeven
2020-05-29 14:36 ` Geert Uytterhoeven
2020-05-27 20:23 ` [PATCH 3/3] ARM: dts: r8a7742-iwg21d-q7: Sound DMA support via DVC on DTS Lad Prabhakar
2020-05-29 14:36 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1590611013-26029-2-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com \
--to=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=prabhakar.csengg@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.