From: "Darrick J. Wong" <darrick.wong@oracle.com>
To: darrick.wong@oracle.com, guaneryu@gmail.com
Cc: linux-xfs@vger.kernel.org, fstests@vger.kernel.org
Subject: [PATCH 6/7] xfs: test quota softlimit warning functionality
Date: Tue, 10 Nov 2020 16:44:28 -0800 [thread overview]
Message-ID: <160505546820.1388823.9325928100187068577.stgit@magnolia> (raw)
In-Reply-To: <160505542802.1388823.10368384826199448253.stgit@magnolia>
From: Darrick J. Wong <darrick.wong@oracle.com>
Make sure that quota softlimits work, which is to say that one can
exceed the softlimit up to warnlimit times before it starts enforcing
that.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
tests/xfs/915 | 176 +++++++++++++++++++++++++++++++++++++++++++++++++++++
tests/xfs/915.out | 151 +++++++++++++++++++++++++++++++++++++++++++++
tests/xfs/group | 1
3 files changed, 328 insertions(+)
create mode 100755 tests/xfs/915
create mode 100644 tests/xfs/915.out
diff --git a/tests/xfs/915 b/tests/xfs/915
new file mode 100755
index 00000000..0a37a1b5
--- /dev/null
+++ b/tests/xfs/915
@@ -0,0 +1,176 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2020, Oracle and/or its affiliates. All Rights Reserved.
+#
+# FS QA Test No. 915
+#
+# Check that quota softlimit warnings work the way they should. This means
+# that we can disobey the softlimit up to warnlimit times before it turns into
+# hard(er) enforcement.
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/quota
+
+# real QA test starts here
+_supported_fs xfs
+_require_xfs_quota
+_require_scratch
+
+rm -f $seqres.full
+
+filter_report()
+{
+ tr -s '[:space:]' | \
+ perl -npe '
+ s/^\#'$id' /[NAME] /g;
+ s/^\#0 \d+ /[ROOT] 0 /g;
+ s/6 days/7 days/g' |
+ perl -npe '
+ $val = 0;
+ if ($ENV{'LARGE_SCRATCH_DEV'}) {
+ $val = $ENV{'NUM_SPACE_FILES'};
+ }
+ s/(^\[ROOT\] \S+ \S+ \S+ \S+ \[--------\] )(\S+)/$1@{[$2 - $val]}/g' |
+ perl -npe '
+ s|^(.*?) (\d+) (\d+) (\d+)|$1 @{[$2 * 1024 /'$bsize']} @{[$3 * 1024 /'$bsize']} @{[$4 * 1024 /'$bsize']}|'
+}
+
+qsetup()
+{
+ opt=$1
+ enforce=0
+ if [ $opt = "u" -o $opt = "uno" ]; then
+ type=u
+ eval `_choose_uid`
+ elif [ $opt = "g" -o $opt = "gno" ]; then
+ type=g
+ eval `_choose_gid`
+ elif [ $opt = "p" -o $opt = "pno" ]; then
+ type=p
+ eval `_choose_prid`
+ fi
+ [ $opt = "u" -o $opt = "g" -o $opt = "p" ] && enforce=1
+
+ echo "Using type=$type id=$id" >> $seqres.full
+}
+
+exercise() {
+ _scratch_mkfs_xfs | _filter_mkfs 2>$tmp.mkfs
+ cat $tmp.mkfs >>$seqres.full
+
+ # keep the blocksize and data size for dd later
+ . $tmp.mkfs
+
+ _qmount
+
+ qsetup $1
+
+ echo "Using type=$type id=$id" >>$seqres.full
+
+ echo
+ echo "*** report initial settings" | tee -a $seqres.full
+ $XFS_QUOTA_PROG -x \
+ -c "limit -$type isoft=3 ihard=500000 $id" \
+ -c "warn -$type -i -d 13" \
+ $SCRATCH_DEV
+ $XFS_QUOTA_PROG -x \
+ -c "state -$type" >> $seqres.full
+ $XFS_QUOTA_PROG -x \
+ -c "repquota -birnN -$type" $SCRATCH_DEV |
+ filter_report | LC_COLLATE=POSIX sort -ru
+
+ echo
+ echo "*** push past the soft inode limit" | tee -a $seqres.full
+ _file_as_id $SCRATCH_MNT/softok1 $id $type $bsize 0
+ _file_as_id $SCRATCH_MNT/softok2 $id $type $bsize 0
+ _file_as_id $SCRATCH_MNT/softok3 $id $type $bsize 0
+ _file_as_id $SCRATCH_MNT/softwarn1 $id $type $bsize 0
+ $XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
+ -c "repquota -birnN -$type" $SCRATCH_DEV |
+ filter_report | LC_COLLATE=POSIX sort -ru
+
+ echo
+ echo "*** push further past the soft inode limit" | tee -a $seqres.full
+ for warn_nr in $(seq 2 5); do
+ _file_as_id $SCRATCH_MNT/softwarn$warn_nr $id $type $bsize 0
+ done
+ $XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
+ -c "repquota -birnN -$type" $SCRATCH_DEV |
+ filter_report | LC_COLLATE=POSIX sort -ru
+
+ echo
+ echo "*** push past the soft inode warning limit" | tee -a $seqres.full
+ for warn_nr in $(seq 6 15); do
+ _file_as_id $SCRATCH_MNT/softwarn$warn_nr $id $type $bsize 0
+ done
+ $XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
+ -c "repquota -birnN -$type" $SCRATCH_DEV |
+ filter_report | LC_COLLATE=POSIX sort -ru
+
+ echo
+ echo "*** unmount"
+ _scratch_unmount
+}
+
+_scratch_mkfs > $seqres.full
+_scratch_mount >> $seqres.full
+
+chmod a+rwx $SCRATCH_MNT $seqres.full # arbitrary users will write here
+bsize=$(_get_file_block_size $SCRATCH_MNT)
+_scratch_unmount
+
+cat >$tmp.projects <<EOF
+1:$SCRATCH_MNT
+EOF
+
+cat >$tmp.projid <<EOF
+root:0
+scratch:1
+EOF
+
+projid_file="$tmp.projid"
+
+echo "*** user"
+_qmount_option "uquota"
+exercise u
+
+echo "*** group"
+_qmount_option "gquota"
+exercise g
+
+echo "*** uqnoenforce"
+_qmount_option "uqnoenforce"
+exercise uno
+
+echo "*** gqnoenforce"
+_qmount_option "gqnoenforce"
+exercise gno
+
+echo "*** pquota"
+_qmount_option "pquota"
+exercise p
+
+echo "*** pqnoenforce"
+_qmount_option "pqnoenforce"
+exercise pno
+
+# success, all done
+status=0
+exit
diff --git a/tests/xfs/915.out b/tests/xfs/915.out
new file mode 100644
index 00000000..c3bb855e
--- /dev/null
+++ b/tests/xfs/915.out
@@ -0,0 +1,151 @@
+QA output created by 915
+*** user
+meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
+data = bsize=XXX blocks=XXX, imaxpct=PCT
+ = sunit=XXX swidth=XXX, unwritten=X
+naming =VERN bsize=XXX
+log =LDEV bsize=XXX blocks=XXX
+realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
+
+*** report initial settings
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 0 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** push past the soft inode limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 4 3 500000 01 [7 days] 0 0 0 00 [--------]
+
+*** push further past the soft inode limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 8 3 500000 05 [7 days] 0 0 0 00 [--------]
+
+*** push past the soft inode warning limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 16 3 500000 13 [7 days] 0 0 0 00 [--------]
+
+*** unmount
+*** group
+meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
+data = bsize=XXX blocks=XXX, imaxpct=PCT
+ = sunit=XXX swidth=XXX, unwritten=X
+naming =VERN bsize=XXX
+log =LDEV bsize=XXX blocks=XXX
+realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
+
+*** report initial settings
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 0 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** push past the soft inode limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 4 3 500000 01 [7 days] 0 0 0 00 [--------]
+
+*** push further past the soft inode limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 8 3 500000 05 [7 days] 0 0 0 00 [--------]
+
+*** push past the soft inode warning limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 16 3 500000 13 [7 days] 0 0 0 00 [--------]
+
+*** unmount
+*** uqnoenforce
+meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
+data = bsize=XXX blocks=XXX, imaxpct=PCT
+ = sunit=XXX swidth=XXX, unwritten=X
+naming =VERN bsize=XXX
+log =LDEV bsize=XXX blocks=XXX
+realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
+
+*** report initial settings
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 0 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** push past the soft inode limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 4 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** push further past the soft inode limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 8 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** push past the soft inode warning limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 18 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** unmount
+*** gqnoenforce
+meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
+data = bsize=XXX blocks=XXX, imaxpct=PCT
+ = sunit=XXX swidth=XXX, unwritten=X
+naming =VERN bsize=XXX
+log =LDEV bsize=XXX blocks=XXX
+realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
+
+*** report initial settings
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 0 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** push past the soft inode limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 4 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** push further past the soft inode limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 8 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** push past the soft inode warning limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 18 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** unmount
+*** pquota
+meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
+data = bsize=XXX blocks=XXX, imaxpct=PCT
+ = sunit=XXX swidth=XXX, unwritten=X
+naming =VERN bsize=XXX
+log =LDEV bsize=XXX blocks=XXX
+realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
+
+*** report initial settings
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 0 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** push past the soft inode limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 4 3 500000 02 [7 days] 0 0 0 00 [--------]
+
+*** push further past the soft inode limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 8 3 500000 06 [7 days] 0 0 0 00 [--------]
+
+*** push past the soft inode warning limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 15 3 500000 13 [7 days] 0 0 0 00 [--------]
+
+*** unmount
+*** pqnoenforce
+meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
+data = bsize=XXX blocks=XXX, imaxpct=PCT
+ = sunit=XXX swidth=XXX, unwritten=X
+naming =VERN bsize=XXX
+log =LDEV bsize=XXX blocks=XXX
+realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
+
+*** report initial settings
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 0 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** push past the soft inode limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 4 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** push further past the soft inode limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 8 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** push past the soft inode warning limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 18 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** unmount
diff --git a/tests/xfs/group b/tests/xfs/group
index 74f0d37c..17f6bc6c 100644
--- a/tests/xfs/group
+++ b/tests/xfs/group
@@ -524,3 +524,4 @@
760 auto quick rw collapse punch insert zero prealloc
761 auto quick realtime
763 auto quick rw realtime
+915 auto quick quota
next prev parent reply other threads:[~2020-11-11 0:44 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-11 0:43 [PATCH 0/7] various: test xfs things fixed in 5.10 Darrick J. Wong
2020-11-11 0:43 ` [PATCH 1/7] xfs: test fallocate ops when rt extent size is and isn't a power of 2 Darrick J. Wong
2020-11-11 0:44 ` [PATCH 2/7] xfs: test regression in xfs_bmap_validate_extent Darrick J. Wong
2020-11-11 0:44 ` [PATCH 3/7] generic: test reflink and copy_file_range behavior with O_SYNC and FS_XFLAG_SYNC files Darrick J. Wong
2020-11-11 0:44 ` [PATCH 4/7] xfs: test rtalloc alignment and math errors Darrick J. Wong
2020-11-11 0:44 ` [PATCH 5/7] xfs: test mkfs min log size calculation w/ rt volumes Darrick J. Wong
2020-11-11 0:44 ` Darrick J. Wong [this message]
2020-11-11 0:44 ` [PATCH 7/7] xfs/122: fix test for xfs_attr_shortform_t conversion Darrick J. Wong
2020-11-22 14:27 ` [PATCH 0/7] various: test xfs things fixed in 5.10 Eryu Guan
2020-11-23 18:20 ` Darrick J. Wong
-- strict thread matches above, loose matches on Subject: below --
2020-10-27 19:02 Darrick J. Wong
2020-10-27 19:03 ` [PATCH 6/7] xfs: test quota softlimit warning functionality Darrick J. Wong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=160505546820.1388823.9325928100187068577.stgit@magnolia \
--to=darrick.wong@oracle.com \
--cc=fstests@vger.kernel.org \
--cc=guaneryu@gmail.com \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.