[PATCH v7 5/5] usb: dwc3: qcom: Keep power domain on to support wakeup

From: Sandeep Maheswaram <sanm@codeaurora.org>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Felipe Balbi <balbi@kernel.org>,
	Stephen Boyd <swboyd@chromium.org>,
	Doug Anderson <dianders@chromium.org>,
	Matthias Kaehlcke <mka@chromium.org>
Cc: linux-arm-msm@vger.kernel.org, linux-usb@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Manu Gautam <mgautam@codeaurora.org>,
	Sandeep Maheswaram <sanm@codeaurora.org>
Subject: [PATCH v7 5/5] usb: dwc3: qcom: Keep power domain on to support wakeup
Date: Wed, 28 Apr 2021 10:41:56 +0530	[thread overview]
Message-ID: <1619586716-8687-6-git-send-email-sanm@codeaurora.org> (raw)
In-Reply-To: <1619586716-8687-1-git-send-email-sanm@codeaurora.org>

If wakeup capable devices are connected to the controller (directly
or through hubs) at suspend time keep the power domain on in order
to support wakeup from these devices.

Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
---
 drivers/usb/dwc3/dwc3-qcom.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index 82125bc..1e220af 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -17,9 +17,11 @@
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/phy/phy.h>
+#include <linux/pm_domain.h>
 #include <linux/usb/of.h>
 #include <linux/reset.h>
 #include <linux/iopoll.h>
+#include <linux/usb/hcd.h>
 
 #include "core.h"
 
@@ -354,10 +356,19 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom)
 {
 	u32 val;
 	int i, ret;
+	struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
+	struct usb_hcd  *hcd;
+	struct generic_pm_domain *genpd = pd_to_genpd(qcom->dev->pm_domain);
 
 	if (qcom->is_suspended)
 		return 0;
 
+	if (dwc->xhci) {
+		hcd = platform_get_drvdata(dwc->xhci);
+		if (usb_wakeup_enabled_descendants(hcd->self.root_hub))
+			genpd->flags |= GENPD_FLAG_ACTIVE_WAKEUP;
+	}
+
 	val = readl(qcom->qscratch_base + PWR_EVNT_IRQ_STAT_REG);
 	if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
 		dev_err(qcom->dev, "HS-PHY not in L2\n");
@@ -382,9 +393,15 @@ static int dwc3_qcom_resume(struct dwc3_qcom *qcom)
 	int ret;
 	int i;
 
+	struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
+	struct generic_pm_domain *genpd = pd_to_genpd(qcom->dev->pm_domain);
+
 	if (!qcom->is_suspended)
 		return 0;
 
+	if (dwc->xhci)
+		genpd->flags &= ~GENPD_FLAG_ACTIVE_WAKEUP;
+
 	if (device_may_wakeup(qcom->dev))
 		dwc3_qcom_disable_interrupts(qcom);
 
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

