[irqchip: irq/irqchip-next] irqchip/exiu: Fix acknowledgment of edge triggered interrupts - irqchip-bot for Daniel Thompson

From: "irqchip-bot for Daniel Thompson" <tip-bot2@linutronix.de>
To: linux-kernel@vger.kernel.org
Cc: Daniel Thompson <daniel.thompson@linaro.org>,
	Ard Biesheuvel <ardb@kernel.org>, Marc Zyngier <maz@kernel.org>,
	tglx@linutronix.de
Subject: [irqchip: irq/irqchip-next] irqchip/exiu: Fix acknowledgment of edge triggered interrupts
Date: Wed, 04 May 2022 16:15:14 -0000	[thread overview]
Message-ID: <165168091463.4207.2939998284968135016.tip-bot2@tip-bot2> (raw)
In-Reply-To: <20220503134541.2566457-1-daniel.thompson@linaro.org>

The following commit has been merged into the irq/irqchip-next branch of irqchip:

Commit-ID:     4efc851c36e389f7ed432edac0149acc5f94b0c7
Gitweb:        https://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms/4efc851c36e389f7ed432edac0149acc5f94b0c7
Author:        Daniel Thompson <daniel.thompson@linaro.org>
AuthorDate:    Tue, 03 May 2022 14:45:41 +01:00
Committer:     Marc Zyngier <maz@kernel.org>
CommitterDate: Wed, 04 May 2022 16:33:17 +01:00

irqchip/exiu: Fix acknowledgment of edge triggered interrupts

Currently the EXIU uses the fasteoi interrupt flow that is configured by
it's parent (irq-gic-v3.c). With this flow the only chance to clear the
interrupt request happens during .irq_eoi() and (obviously) this happens
after the interrupt handler has run. EXIU requires edge triggered
interrupts to be acked prior to interrupt handling. Without this we
risk incorrect interrupt dismissal when a new interrupt is delivered
after the handler reads and acknowledges the peripheral but before the
irq_eoi() takes place.

Fix this by clearing the interrupt request from .irq_ack() if we are
configured for edge triggered interrupts. This requires adopting the
fasteoi-ack flow instead of the fasteoi to ensure the ack gets called.

These changes have been tested using the power button on a
Developerbox/SC2A11 combined with some hackery in gpio-keys so I can
play with the different trigger mode [and an mdelay(500) so I can
can check what happens on a double click in both modes].

Fixes: 706cffc1b912 ("irqchip/exiu: Add support for Socionext Synquacer EXIU controller")
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220503134541.2566457-1-daniel.thompson@linaro.org
---
 arch/arm64/Kconfig.platforms   |  1 +
 drivers/irqchip/irq-sni-exiu.c | 25 ++++++++++++++++++++++---
 2 files changed, 23 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 30b123c..aaeaf57 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -253,6 +253,7 @@ config ARCH_INTEL_SOCFPGA
 
 config ARCH_SYNQUACER
 	bool "Socionext SynQuacer SoC Family"
+	select IRQ_FASTEOI_HIERARCHY_HANDLERS
 
 config ARCH_TEGRA
 	bool "NVIDIA Tegra SoC Family"
diff --git a/drivers/irqchip/irq-sni-exiu.c b/drivers/irqchip/irq-sni-exiu.c
index abd011f..c7db617 100644
--- a/drivers/irqchip/irq-sni-exiu.c
+++ b/drivers/irqchip/irq-sni-exiu.c
@@ -37,11 +37,26 @@ struct exiu_irq_data {
 	u32		spi_base;
 };
 
-static void exiu_irq_eoi(struct irq_data *d)
+static void exiu_irq_ack(struct irq_data *d)
 {
 	struct exiu_irq_data *data = irq_data_get_irq_chip_data(d);
 
 	writel(BIT(d->hwirq), data->base + EIREQCLR);
+}
+
+static void exiu_irq_eoi(struct irq_data *d)
+{
+	struct exiu_irq_data *data = irq_data_get_irq_chip_data(d);
+
+	/*
+	 * Level triggered interrupts are latched and must be cleared during
+	 * EOI or the interrupt will be jammed on. Of course if a level
+	 * triggered interrupt is still asserted then the write will not clear
+	 * the interrupt.
+	 */
+	if (irqd_is_level_type(d))
+		writel(BIT(d->hwirq), data->base + EIREQCLR);
+
 	irq_chip_eoi_parent(d);
 }
 
@@ -91,10 +106,13 @@ static int exiu_irq_set_type(struct irq_data *d, unsigned int type)
 	writel_relaxed(val, data->base + EILVL);
 
 	val = readl_relaxed(data->base + EIEDG);
-	if (type == IRQ_TYPE_LEVEL_LOW || type == IRQ_TYPE_LEVEL_HIGH)
+	if (type == IRQ_TYPE_LEVEL_LOW || type == IRQ_TYPE_LEVEL_HIGH) {
 		val &= ~BIT(d->hwirq);
-	else
+		irq_set_handler_locked(d, handle_fasteoi_irq);
+	} else {
 		val |= BIT(d->hwirq);
+		irq_set_handler_locked(d, handle_fasteoi_ack_irq);
+	}
 	writel_relaxed(val, data->base + EIEDG);
 
 	writel_relaxed(BIT(d->hwirq), data->base + EIREQCLR);
@@ -104,6 +122,7 @@ static int exiu_irq_set_type(struct irq_data *d, unsigned int type)
 
 static struct irq_chip exiu_irq_chip = {
 	.name			= "EXIU",
+	.irq_ack		= exiu_irq_ack,
 	.irq_eoi		= exiu_irq_eoi,
 	.irq_enable		= exiu_irq_enable,
 	.irq_mask		= exiu_irq_mask,
