[PATCH v2 1/2] usb: dwc3: gadget: Change condition for processing suspend event

From: Prashanth K <quic_prashk@quicinc.com>
To: "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	"Thinh Nguyen" <Thinh.Nguyen@synopsys.com>,
	"Jakob Koschel" <jakobkoschel@gmail.com>,
	"Jó Ágila Bitsch" <jgilab@gmail.com>,
	"Alan Stern" <stern@rowland.harvard.edu>
Cc: Pratham Pratap <quic_ppratap@quicinc.com>,
	Jack Pham <quic_jackp@quicinc.com>, <linux-usb@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	Prashanth K <quic_prashk@quicinc.com>
Subject: [PATCH v2 1/2] usb: dwc3: gadget: Change condition for processing suspend event
Date: Thu, 23 Feb 2023 14:27:44 +0530	[thread overview]
Message-ID: <1677142665-8686-2-git-send-email-quic_prashk@quicinc.com> (raw)
In-Reply-To: <1677142665-8686-1-git-send-email-quic_prashk@quicinc.com>

Currently we process the suspend interrupt event only if the
device is in configured state. Consider a case where device
is not configured and got suspend interrupt, in that case our
gadget will still use 100mA as composite_suspend didn't happen.
But battery charging specification (BC1.2) expects a downstream
device to draw less than 2.5mA when unconnected OR suspended.

Fix this by removing the condition for processing suspend event,
and thus composite_resume would set vbus draw to 2.

Fixes: 72704f876f50 ("dwc3: gadget: Implement the suspend entry event handler")
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
---
 drivers/usb/dwc3/gadget.c | 11 ++---------
 1 file changed, 2 insertions(+), 9 deletions(-)

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 89dcfac..a83f34e 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -4241,15 +4241,8 @@ static void dwc3_gadget_interrupt(struct dwc3 *dwc,
 		break;
 	case DWC3_DEVICE_EVENT_SUSPEND:
 		/* It changed to be suspend event for version 2.30a and above */
-		if (!DWC3_VER_IS_PRIOR(DWC3, 230A)) {
-			/*
-			 * Ignore suspend event until the gadget enters into
-			 * USB_STATE_CONFIGURED state.
-			 */
-			if (dwc->gadget->state >= USB_STATE_CONFIGURED)
-				dwc3_gadget_suspend_interrupt(dwc,
-						event->event_info);
-		}
+		if (!DWC3_VER_IS_PRIOR(DWC3, 230A))
+			dwc3_gadget_suspend_interrupt(dwc, event->event_info);
 		break;
 	case DWC3_DEVICE_EVENT_SOF:
 	case DWC3_DEVICE_EVENT_ERRATIC_ERROR:
-- 
2.7.4

