From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
To: Linux Media Mailing List <linux-media@vger.kernel.org>
Cc: linuxarm@huawei.com, mauro.chehab@huawei.com,
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>,
Bingbu Cao <bingbu.cao@intel.com>,
Hans Verkuil <hverkuil-cisco@xs4all.nl>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Sean Young <sean@mess.org>, Tianshu Qiu <tian.shu.qiu@intel.com>,
Yong Zhi <yong.zhi@intel.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH 13/13] media: docs: uAPI: fix table output in LaTeX/PDF format
Date: Thu, 10 Dec 2020 11:55:52 +0100 [thread overview]
Message-ID: <1f2ed769f40232320ced988f7bee010d6d2db9bf.1607597287.git.mchehab+huawei@kernel.org> (raw)
In-Reply-To: <cover.1607597287.git.mchehab+huawei@kernel.org>
There are lots of tables that are not properly displayed
in LaTeX/PDF.
Fix the tablecolumns, add longtable where needed and LaTeX
formatting macros, in order to address such issues.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../media/cec/cec-ioc-adap-g-caps.rst | 4 +-
.../media/cec/cec-ioc-adap-g-conn-info.rst | 6 +-
.../media/cec/cec-ioc-adap-g-log-addrs.rst | 12 +-
.../media/cec/cec-ioc-dqevent.rst | 10 +-
.../media/cec/cec-ioc-g-mode.rst | 4 +-
.../media/cec/cec-ioc-receive.rst | 8 +-
.../userspace-api/media/dvb/fe-type-t.rst | 2 +-
.../media/mediactl/media-ioc-device-info.rst | 2 +-
.../mediactl/media-ioc-enum-entities.rst | 2 +-
.../media/mediactl/media-ioc-enum-links.rst | 6 +-
.../media/mediactl/media-ioc-g-topology.rst | 12 +-
.../media/mediactl/media-types.rst | 4 +-
.../userspace-api/media/rc/rc-tables.rst | 2 +-
.../userspace-api/media/v4l/buffer.rst | 14 +-
.../userspace-api/media/v4l/control.rst | 2 +-
.../userspace-api/media/v4l/dev-meta.rst | 2 +-
.../userspace-api/media/v4l/dev-raw-vbi.rst | 4 +-
.../userspace-api/media/v4l/dev-rds.rst | 4 +-
.../userspace-api/media/v4l/dev-sdr.rst | 2 +-
.../media/v4l/dev-sliced-vbi.rst | 27 ++-
.../userspace-api/media/v4l/dev-subdev.rst | 6 +-
.../userspace-api/media/v4l/diff-v4l.rst | 10 +-
.../media/v4l/ext-ctrls-camera.rst | 14 +-
.../media/v4l/ext-ctrls-codec-stateless.rst | 143 ++++++++++--
.../media/v4l/ext-ctrls-codec.rst | 208 ++++++++++++++----
.../userspace-api/media/v4l/ext-ctrls-dv.rst | 2 +-
.../media/v4l/ext-ctrls-flash.rst | 7 +-
.../userspace-api/media/v4l/field-order.rst | 2 +-
.../media/v4l/pixfmt-compressed.rst | 12 +-
.../media/v4l/pixfmt-packed-yuv.rst | 26 ++-
.../media/v4l/pixfmt-reserved.rst | 10 +-
.../userspace-api/media/v4l/pixfmt-rgb.rst | 9 +-
.../media/v4l/pixfmt-srggb10-ipu3.rst | 10 +-
.../media/v4l/pixfmt-srggb10p.rst | 2 +-
.../media/v4l/pixfmt-srggb12p.rst | 2 +-
.../media/v4l/pixfmt-srggb14p.rst | 6 +-
.../media/v4l/pixfmt-v4l2-mplane.rst | 4 +-
.../userspace-api/media/v4l/pixfmt-v4l2.rst | 4 +-
.../media/v4l/pixfmt-yuv-luma.rst | 10 +
.../media/v4l/subdev-formats.rst | 26 ++-
.../media/v4l/v4l2-selection-flags.rst | 14 +-
.../media/v4l/v4l2-selection-targets.rst | 12 +-
.../media/v4l/vidioc-create-bufs.rst | 2 +-
.../media/v4l/vidioc-cropcap.rst | 4 +-
.../media/v4l/vidioc-dbg-g-chip-info.rst | 6 +-
.../media/v4l/vidioc-dbg-g-register.rst | 4 +-
.../media/v4l/vidioc-decoder-cmd.rst | 8 +-
.../media/v4l/vidioc-dqevent.rst | 21 +-
.../media/v4l/vidioc-dv-timings-cap.rst | 6 +-
.../media/v4l/vidioc-encoder-cmd.rst | 6 +-
.../media/v4l/vidioc-enum-dv-timings.rst | 2 +-
.../media/v4l/vidioc-enum-fmt.rst | 10 +-
.../media/v4l/vidioc-enum-frameintervals.rst | 7 +-
.../media/v4l/vidioc-enum-framesizes.rst | 8 +-
.../media/v4l/vidioc-enum-freq-bands.rst | 4 +-
.../media/v4l/vidioc-enuminput.rst | 8 +-
.../media/v4l/vidioc-enumoutput.rst | 6 +-
.../media/v4l/vidioc-enumstd.rst | 6 +-
.../userspace-api/media/v4l/vidioc-expbuf.rst | 2 +-
.../media/v4l/vidioc-g-audio.rst | 6 +-
.../media/v4l/vidioc-g-audioout.rst | 2 +-
.../userspace-api/media/v4l/vidioc-g-crop.rst | 2 +-
.../userspace-api/media/v4l/vidioc-g-ctrl.rst | 2 +-
.../media/v4l/vidioc-g-dv-timings.rst | 20 +-
.../userspace-api/media/v4l/vidioc-g-edid.rst | 2 +-
.../media/v4l/vidioc-g-enc-index.rst | 6 +-
.../media/v4l/vidioc-g-ext-ctrls.rst | 20 +-
.../userspace-api/media/v4l/vidioc-g-fbuf.rst | 6 +-
.../userspace-api/media/v4l/vidioc-g-fmt.rst | 2 +-
.../media/v4l/vidioc-g-frequency.rst | 2 +-
.../media/v4l/vidioc-g-jpegcomp.rst | 4 +-
.../media/v4l/vidioc-g-modulator.rst | 9 +-
.../userspace-api/media/v4l/vidioc-g-parm.rst | 11 +-
.../media/v4l/vidioc-g-priority.rst | 2 +-
.../media/v4l/vidioc-g-selection.rst | 2 +-
.../media/v4l/vidioc-g-sliced-vbi-cap.rst | 5 +-
.../media/v4l/vidioc-g-tuner.rst | 12 +-
.../media/v4l/vidioc-querycap.rst | 8 +-
.../media/v4l/vidioc-queryctrl.rst | 21 +-
.../media/v4l/vidioc-reqbufs.rst | 14 +-
.../media/v4l/vidioc-s-hw-freq-seek.rst | 2 +-
.../v4l/vidioc-subdev-enum-frame-interval.rst | 2 +-
.../v4l/vidioc-subdev-enum-frame-size.rst | 2 +-
.../v4l/vidioc-subdev-enum-mbus-code.rst | 14 +-
.../media/v4l/vidioc-subdev-g-crop.rst | 2 +-
.../media/v4l/vidioc-subdev-g-fmt.rst | 4 +-
.../v4l/vidioc-subdev-g-frame-interval.rst | 2 +-
.../media/v4l/vidioc-subdev-g-selection.rst | 2 +-
.../media/v4l/vidioc-subdev-querycap.rst | 4 +-
.../media/v4l/vidioc-subscribe-event.rst | 4 +-
90 files changed, 671 insertions(+), 303 deletions(-)
diff --git a/Documentation/userspace-api/media/cec/cec-ioc-adap-g-caps.rst b/Documentation/userspace-api/media/cec/cec-ioc-adap-g-caps.rst
index c7309a2fcbce..d5e014ce19b5 100644
--- a/Documentation/userspace-api/media/cec/cec-ioc-adap-g-caps.rst
+++ b/Documentation/userspace-api/media/cec/cec-ioc-adap-g-caps.rst
@@ -35,7 +35,7 @@ device information, applications call the ioctl with a pointer to a
struct :c:type:`cec_caps`. The driver fills the structure and
returns the information to the application. The ioctl never fails.
-.. tabularcolumns:: |p{1.2cm}|p{2.5cm}|p{13.8cm}|
+.. tabularcolumns:: |p{1.2cm}|p{2.5cm}|p{13.6cm}|
.. c:type:: cec_caps
@@ -63,7 +63,7 @@ returns the information to the application. The ioctl never fails.
- CEC Framework API version, formatted with the ``KERNEL_VERSION()``
macro.
-.. tabularcolumns:: |p{4.4cm}|p{2.5cm}|p{10.6cm}|
+.. tabularcolumns:: |p{4.4cm}|p{2.5cm}|p{10.4cm}|
.. _cec-capabilities:
diff --git a/Documentation/userspace-api/media/cec/cec-ioc-adap-g-conn-info.rst b/Documentation/userspace-api/media/cec/cec-ioc-adap-g-conn-info.rst
index 13116b0b5c17..0e19855730e1 100644
--- a/Documentation/userspace-api/media/cec/cec-ioc-adap-g-conn-info.rst
+++ b/Documentation/userspace-api/media/cec/cec-ioc-adap-g-conn-info.rst
@@ -39,7 +39,7 @@ provide a pointer to a cec_connector_info struct which will be populated
by the kernel with the info provided by the adapter's driver. This ioctl
is only available if the ``CEC_CAP_CONNECTOR_INFO`` capability is set.
-.. tabularcolumns:: |p{1.0cm}|p{4.4cm}|p{2.5cm}|p{9.6cm}|
+.. tabularcolumns:: |p{1.0cm}|p{4.4cm}|p{2.5cm}|p{9.2cm}|
.. c:type:: cec_connector_info
@@ -59,7 +59,7 @@ is only available if the ``CEC_CAP_CONNECTOR_INFO`` capability is set.
* - }
-
-.. tabularcolumns:: |p{4.4cm}|p{2.5cm}|p{10.6cm}|
+.. tabularcolumns:: |p{4.4cm}|p{2.5cm}|p{10.4cm}|
.. _connector-type:
@@ -82,7 +82,7 @@ is only available if the ``CEC_CAP_CONNECTOR_INFO`` capability is set.
Information about the connector can be found in
:ref:`cec-drm-connector-info`.
-.. tabularcolumns:: |p{4.4cm}|p{2.5cm}|p{10.6cm}|
+.. tabularcolumns:: |p{4.4cm}|p{2.5cm}|p{10.4cm}|
.. c:type:: cec_drm_connector_info
diff --git a/Documentation/userspace-api/media/cec/cec-ioc-adap-g-log-addrs.rst b/Documentation/userspace-api/media/cec/cec-ioc-adap-g-log-addrs.rst
index c760c07b6b3f..f3293a589dd6 100644
--- a/Documentation/userspace-api/media/cec/cec-ioc-adap-g-log-addrs.rst
+++ b/Documentation/userspace-api/media/cec/cec-ioc-adap-g-log-addrs.rst
@@ -67,7 +67,7 @@ logical address types are already defined will return with error ``EBUSY``.
.. c:type:: cec_log_addrs
-.. tabularcolumns:: |p{1.0cm}|p{8.0cm}|p{7.5cm}|
+.. tabularcolumns:: |p{1.0cm}|p{8.0cm}|p{8.0cm}|
.. cssclass:: longtable
@@ -150,7 +150,7 @@ logical address types are already defined will return with error ``EBUSY``.
give the CEC framework more information about the device type, even
though the framework won't use it directly in the CEC message.
-.. tabularcolumns:: |p{7.8cm}|p{1.0cm}|p{8.7cm}|
+.. tabularcolumns:: |p{7.8cm}|p{1.0cm}|p{8.5cm}|
.. _cec-log-addrs-flags:
@@ -186,7 +186,7 @@ logical address types are already defined will return with error ``EBUSY``.
All other messages are ignored.
-.. tabularcolumns:: |p{7.8cm}|p{1.0cm}|p{8.7cm}|
+.. tabularcolumns:: |p{7.8cm}|p{1.0cm}|p{8.5cm}|
.. _cec-versions:
@@ -211,7 +211,7 @@ logical address types are already defined will return with error ``EBUSY``.
- 6
- CEC version according to the HDMI 2.0 standard.
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
.. _cec-prim-dev-types:
@@ -256,7 +256,7 @@ logical address types are already defined will return with error ``EBUSY``.
- 7
- Use for a video processor device.
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
.. _cec-log-addr-types:
@@ -304,7 +304,7 @@ logical address types are already defined will return with error ``EBUSY``.
Control).
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
.. _cec-all-dev-types-flags:
diff --git a/Documentation/userspace-api/media/cec/cec-ioc-dqevent.rst b/Documentation/userspace-api/media/cec/cec-ioc-dqevent.rst
index 736fda5ad73d..71d6a9e81f75 100644
--- a/Documentation/userspace-api/media/cec/cec-ioc-dqevent.rst
+++ b/Documentation/userspace-api/media/cec/cec-ioc-dqevent.rst
@@ -44,7 +44,7 @@ two :ref:`CEC_EVENT_STATE_CHANGE <CEC-EVENT-STATE-CHANGE>` events with
the same state). In that case the intermediate state changes were lost but
it is guaranteed that the state did change in between the two events.
-.. tabularcolumns:: |p{1.2cm}|p{2.9cm}|p{13.4cm}|
+.. tabularcolumns:: |p{1.2cm}|p{2.9cm}|p{13.2cm}|
.. c:type:: cec_event_state_change
@@ -74,7 +74,7 @@ it is guaranteed that the state did change in between the two events.
.. c:type:: cec_event_lost_msgs
-.. tabularcolumns:: |p{1.0cm}|p{2.0cm}|p{14.5cm}|
+.. tabularcolumns:: |p{1.0cm}|p{2.0cm}|p{14.3cm}|
.. flat-table:: struct cec_event_lost_msgs
:header-rows: 0
@@ -93,7 +93,7 @@ it is guaranteed that the state did change in between the two events.
replied to within a second according to the CEC specification,
this is more than enough.
-.. tabularcolumns:: |p{1.0cm}|p{4.4cm}|p{2.5cm}|p{9.6cm}|
+.. tabularcolumns:: |p{1.0cm}|p{4.4cm}|p{2.5cm}|p{9.2cm}|
.. c:type:: cec_event
@@ -128,7 +128,7 @@ it is guaranteed that the state did change in between the two events.
* - }
-
-.. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{11.0cm}|
+.. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{10.8cm}|
.. _cec-events:
@@ -201,7 +201,7 @@ it is guaranteed that the state did change in between the two events.
if the 5V is high, then an initial event will be generated for that
filehandle.
-.. tabularcolumns:: |p{6.0cm}|p{0.6cm}|p{10.9cm}|
+.. tabularcolumns:: |p{6.0cm}|p{0.6cm}|p{10.7cm}|
.. _cec-event-flags:
diff --git a/Documentation/userspace-api/media/cec/cec-ioc-g-mode.rst b/Documentation/userspace-api/media/cec/cec-ioc-g-mode.rst
index 663bdef8d6da..5fe105a13a6e 100644
--- a/Documentation/userspace-api/media/cec/cec-ioc-g-mode.rst
+++ b/Documentation/userspace-api/media/cec/cec-ioc-g-mode.rst
@@ -72,7 +72,7 @@ always call :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>`.
Available initiator modes are:
-.. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{11.0cm}|
+.. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{10.8cm}|
.. _cec-mode-initiator_e:
@@ -106,7 +106,7 @@ Available initiator modes are:
Available follower modes are:
-.. tabularcolumns:: |p{6.6cm}|p{0.9cm}|p{10.0cm}|
+.. tabularcolumns:: |p{6.6cm}|p{0.9cm}|p{9.8cm}|
.. _cec-mode-follower_e:
diff --git a/Documentation/userspace-api/media/cec/cec-ioc-receive.rst b/Documentation/userspace-api/media/cec/cec-ioc-receive.rst
index b2fc051e99f4..bd7f7e7235cb 100644
--- a/Documentation/userspace-api/media/cec/cec-ioc-receive.rst
+++ b/Documentation/userspace-api/media/cec/cec-ioc-receive.rst
@@ -84,7 +84,7 @@ physical address, but the cable is still connected and CEC still works.
In order to detect/wake up the device it is allowed to send poll and 'Image/Text
View On' messages from initiator 0xf ('Unregistered') to destination 0 ('TV').
-.. tabularcolumns:: |p{1.0cm}|p{3.5cm}|p{13.0cm}|
+.. tabularcolumns:: |p{1.0cm}|p{3.5cm}|p{12.8cm}|
.. c:type:: cec_msg
@@ -196,7 +196,7 @@ View On' messages from initiator 0xf ('Unregistered') to destination 0 ('TV').
supports this, otherwise it is always 0. This counter is only
valid if the :ref:`CEC_TX_STATUS_ERROR <CEC-TX-STATUS-ERROR>` status bit is set.
-.. tabularcolumns:: |p{6.2cm}|p{1.0cm}|p{10.3cm}|
+.. tabularcolumns:: |p{6.2cm}|p{1.0cm}|p{10.1cm}|
.. _cec-msg-flags:
@@ -229,7 +229,7 @@ View On' messages from initiator 0xf ('Unregistered') to destination 0 ('TV').
capability. If that is not set, then the ``EPERM`` error code is
returned.
-.. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{11.0cm}|
+.. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{10.8cm}|
.. _cec-tx-status:
@@ -298,7 +298,7 @@ View On' messages from initiator 0xf ('Unregistered') to destination 0 ('TV').
- The transmit timed out. This should not normally happen and this
indicates a driver problem.
-.. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{11.0cm}|
+.. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{10.8cm}|
.. _cec-rx-status:
diff --git a/Documentation/userspace-api/media/dvb/fe-type-t.rst b/Documentation/userspace-api/media/dvb/fe-type-t.rst
index e8499d482700..e8986254897f 100644
--- a/Documentation/userspace-api/media/dvb/fe-type-t.rst
+++ b/Documentation/userspace-api/media/dvb/fe-type-t.rst
@@ -11,7 +11,7 @@ fe_type_t type, defined as:
.. c:type:: fe_type
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
.. flat-table:: Frontend types
:header-rows: 1
diff --git a/Documentation/userspace-api/media/mediactl/media-ioc-device-info.rst b/Documentation/userspace-api/media/mediactl/media-ioc-device-info.rst
index 0c4c5d2cfcb2..d56ee6669ab9 100644
--- a/Documentation/userspace-api/media/mediactl/media-ioc-device-info.rst
+++ b/Documentation/userspace-api/media/mediactl/media-ioc-device-info.rst
@@ -39,7 +39,7 @@ ioctl never fails.
.. c:type:: media_device_info
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
.. flat-table:: struct media_device_info
:header-rows: 0
diff --git a/Documentation/userspace-api/media/mediactl/media-ioc-enum-entities.rst b/Documentation/userspace-api/media/mediactl/media-ioc-enum-entities.rst
index 92dd8ecd538c..73bda02498af 100644
--- a/Documentation/userspace-api/media/mediactl/media-ioc-enum-entities.rst
+++ b/Documentation/userspace-api/media/mediactl/media-ioc-enum-entities.rst
@@ -50,7 +50,7 @@ id's until they get an error.
.. c:type:: media_entity_desc
-.. tabularcolumns:: |p{1.5cm}|p{1.7cm}|p{1.6cm}|p{1.5cm}|p{11.2cm}|
+.. tabularcolumns:: |p{1.5cm}|p{1.7cm}|p{1.6cm}|p{1.5cm}|p{10.6cm}|
.. flat-table:: struct media_entity_desc
:header-rows: 0
diff --git a/Documentation/userspace-api/media/mediactl/media-ioc-enum-links.rst b/Documentation/userspace-api/media/mediactl/media-ioc-enum-links.rst
index 3bc98a6a2ec5..381804a91c99 100644
--- a/Documentation/userspace-api/media/mediactl/media-ioc-enum-links.rst
+++ b/Documentation/userspace-api/media/mediactl/media-ioc-enum-links.rst
@@ -54,7 +54,7 @@ returned during the enumeration process.
.. c:type:: media_links_enum
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
.. flat-table:: struct media_links_enum
:header-rows: 0
@@ -82,7 +82,7 @@ returned during the enumeration process.
.. c:type:: media_pad_desc
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
.. flat-table:: struct media_pad_desc
:header-rows: 0
@@ -109,7 +109,7 @@ returned during the enumeration process.
.. c:type:: media_link_desc
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
.. flat-table:: struct media_link_desc
:header-rows: 0
diff --git a/Documentation/userspace-api/media/mediactl/media-ioc-g-topology.rst b/Documentation/userspace-api/media/mediactl/media-ioc-g-topology.rst
index 8f8b3b586edd..77ea5c5e9d7f 100644
--- a/Documentation/userspace-api/media/mediactl/media-ioc-g-topology.rst
+++ b/Documentation/userspace-api/media/mediactl/media-ioc-g-topology.rst
@@ -46,7 +46,7 @@ other values untouched.
If the ``topology_version`` remains the same, the ioctl should fill the
desired arrays with the media graph elements.
-.. tabularcolumns:: |p{1.6cm}|p{3.4cm}|p{12.5cm}|
+.. tabularcolumns:: |p{1.6cm}|p{3.4cm}|p{12.3cm}|
.. c:type:: media_v2_topology
@@ -119,7 +119,7 @@ desired arrays with the media graph elements.
converted to a 64-bits integer. It can be zero. if zero, the ioctl
won't store the links. It will just update ``num_links``
-.. tabularcolumns:: |p{1.6cm}|p{3.2cm}|p{12.7cm}|
+.. tabularcolumns:: |p{1.6cm}|p{3.2cm}|p{12.5cm}|
.. c:type:: media_v2_entity
@@ -156,7 +156,7 @@ desired arrays with the media graph elements.
- Reserved for future extensions. Drivers and applications must set
this array to zero.
-.. tabularcolumns:: |p{1.6cm}|p{3.2cm}|p{12.7cm}|
+.. tabularcolumns:: |p{1.6cm}|p{3.2cm}|p{12.5cm}|
.. c:type:: media_v2_interface
@@ -189,7 +189,7 @@ desired arrays with the media graph elements.
- Used only for device node interfaces. See
:c:type:`media_v2_intf_devnode` for details.
-.. tabularcolumns:: |p{1.6cm}|p{3.2cm}|p{12.7cm}|
+.. tabularcolumns:: |p{1.6cm}|p{3.2cm}|p{12.5cm}|
.. c:type:: media_v2_intf_devnode
@@ -206,7 +206,7 @@ desired arrays with the media graph elements.
- ``minor``
- Device node minor number.
-.. tabularcolumns:: |p{1.6cm}|p{3.2cm}|p{12.7cm}|
+.. tabularcolumns:: |p{1.6cm}|p{3.2cm}|p{12.5cm}|
.. c:type:: media_v2_pad
@@ -241,7 +241,7 @@ desired arrays with the media graph elements.
- Reserved for future extensions. Drivers and applications must set
this array to zero.
-.. tabularcolumns:: |p{1.6cm}|p{3.2cm}|p{12.7cm}|
+.. tabularcolumns:: |p{1.6cm}|p{3.2cm}|p{12.5cm}|
.. c:type:: media_v2_link
diff --git a/Documentation/userspace-api/media/mediactl/media-types.rst b/Documentation/userspace-api/media/mediactl/media-types.rst
index 7b24a213cae7..f853f2b92040 100644
--- a/Documentation/userspace-api/media/mediactl/media-types.rst
+++ b/Documentation/userspace-api/media/mediactl/media-types.rst
@@ -5,7 +5,7 @@
Types and flags used to represent the media graph elements
==========================================================
-.. tabularcolumns:: |p{8.2cm}|p{10.3cm}|
+.. tabularcolumns:: |p{8.2cm}|p{9.3cm}|
.. _media-entity-functions:
.. _MEDIA-ENT-F-UNKNOWN:
@@ -244,7 +244,7 @@ Types and flags used to represent the media graph elements
- The entity represents a connector.
-.. tabularcolumns:: |p{6.5cm}|p{6.0cm}|p{5.0cm}|
+.. tabularcolumns:: |p{6.5cm}|p{6.0cm}|p{4.8cm}|
.. _media-intf-type:
.. _MEDIA-INTF-T-DVB-FE:
diff --git a/Documentation/userspace-api/media/rc/rc-tables.rst b/Documentation/userspace-api/media/rc/rc-tables.rst
index aafbfda1f401..28ed94088015 100644
--- a/Documentation/userspace-api/media/rc/rc-tables.rst
+++ b/Documentation/userspace-api/media/rc/rc-tables.rst
@@ -25,7 +25,7 @@ the remote via /dev/input/event devices.
.. _rc_standard_keymap:
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
.. flat-table:: IR default keymapping
:header-rows: 0
diff --git a/Documentation/userspace-api/media/v4l/buffer.rst b/Documentation/userspace-api/media/v4l/buffer.rst
index 4194ebac2d6a..4b2696a392df 100644
--- a/Documentation/userspace-api/media/v4l/buffer.rst
+++ b/Documentation/userspace-api/media/v4l/buffer.rst
@@ -157,7 +157,7 @@ of appropriately sized buffers for each use case).
struct v4l2_buffer
==================
-.. tabularcolumns:: |p{2.8cm}|p{2.5cm}|p{1.6cm}|p{10.2cm}|
+.. tabularcolumns:: |p{2.9cm}|p{2.4cm}|p{12.0cm}|
.. cssclass:: longtable
@@ -314,7 +314,7 @@ struct v4l2_buffer
struct v4l2_plane
=================
-.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{3.5cm}|p{7.0cm}|
+.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{10.3cm}|
.. cssclass:: longtable
@@ -389,7 +389,7 @@ enum v4l2_buf_type
.. cssclass:: longtable
-.. tabularcolumns:: |p{7.8cm}|p{0.6cm}|p{9.1cm}|
+.. tabularcolumns:: |p{7.8cm}|p{0.6cm}|p{8.9cm}|
.. flat-table::
:header-rows: 0
@@ -681,7 +681,7 @@ Buffer Flags
enum v4l2_memory
================
-.. tabularcolumns:: |p{5.0cm}|p{0.8cm}|p{11.7cm}|
+.. tabularcolumns:: |p{5.0cm}|p{0.8cm}|p{11.5cm}|
.. flat-table::
:header-rows: 0
@@ -715,7 +715,7 @@ The :c:type:`v4l2_buffer_timecode` structure is designed to hold a
struct v4l2_timecode
--------------------
-.. tabularcolumns:: |p{1.4cm}|p{2.8cm}|p{12.3cm}|
+.. tabularcolumns:: |p{1.4cm}|p{2.8cm}|p{13.1cm}|
.. flat-table::
:header-rows: 0
@@ -751,8 +751,6 @@ struct v4l2_timecode
Timecode Types
--------------
-.. tabularcolumns:: |p{5.6cm}|p{0.8cm}|p{11.1cm}|
-
.. flat-table::
:header-rows: 0
:stub-columns: 0
@@ -780,7 +778,7 @@ Timecode Types
Timecode Flags
--------------
-.. tabularcolumns:: |p{6.6cm}|p{1.4cm}|p{9.5cm}|
+.. tabularcolumns:: |p{6.6cm}|p{1.4cm}|p{9.3cm}|
.. flat-table::
:header-rows: 0
diff --git a/Documentation/userspace-api/media/v4l/control.rst b/Documentation/userspace-api/media/v4l/control.rst
index ed5154700308..2da1370f4664 100644
--- a/Documentation/userspace-api/media/v4l/control.rst
+++ b/Documentation/userspace-api/media/v4l/control.rst
@@ -200,7 +200,7 @@ Control IDs
-.. tabularcolumns:: |p{5.5cm}|p{12cm}|
+.. tabularcolumns:: |p{5.7cm}|p{11.8cm}|
.. flat-table::
:header-rows: 0
diff --git a/Documentation/userspace-api/media/v4l/dev-meta.rst b/Documentation/userspace-api/media/v4l/dev-meta.rst
index 8ec3a73dcae4..0e7e1ee1471a 100644
--- a/Documentation/userspace-api/media/v4l/dev-meta.rst
+++ b/Documentation/userspace-api/media/v4l/dev-meta.rst
@@ -49,7 +49,7 @@ to 0.
.. c:type:: v4l2_meta_format
-.. tabularcolumns:: |p{1.4cm}|p{2.2cm}|p{13.9cm}|
+.. tabularcolumns:: |p{1.4cm}|p{2.4cm}|p{13.5cm}|
.. flat-table:: struct v4l2_meta_format
:header-rows: 0
diff --git a/Documentation/userspace-api/media/v4l/dev-raw-vbi.rst b/Documentation/userspace-api/media/v4l/dev-raw-vbi.rst
index 3f43a01ba938..58f97c3a7792 100644
--- a/Documentation/userspace-api/media/v4l/dev-raw-vbi.rst
+++ b/Documentation/userspace-api/media/v4l/dev-raw-vbi.rst
@@ -97,7 +97,7 @@ VBI devices must implement both the :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` and
and always returns default parameters as :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` does.
:ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` is optional.
-.. tabularcolumns:: |p{1.6cm}|p{4.2cm}|p{11.7cm}|
+.. tabularcolumns:: |p{1.6cm}|p{4.2cm}|p{11.5cm}|
.. c:type:: v4l2_vbi_format
@@ -180,7 +180,7 @@ and always returns default parameters as :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` does
- This array is reserved for future extensions. Drivers and
applications must set it to zero.
-.. tabularcolumns:: |p{4.4cm}|p{1.5cm}|p{11.6cm}|
+.. tabularcolumns:: |p{4.4cm}|p{1.5cm}|p{11.4cm}|
.. _vbifmt-flags:
diff --git a/Documentation/userspace-api/media/v4l/dev-rds.rst b/Documentation/userspace-api/media/v4l/dev-rds.rst
index 207216d5e6a5..b1dadc24561f 100644
--- a/Documentation/userspace-api/media/v4l/dev-rds.rst
+++ b/Documentation/userspace-api/media/v4l/dev-rds.rst
@@ -91,8 +91,6 @@ RDS datastructures
.. c:type:: v4l2_rds_data
-.. tabularcolumns:: |p{2.5cm}|p{2.5cm}|p{12.5cm}|
-
.. flat-table:: struct v4l2_rds_data
:header-rows: 0
:stub-columns: 0
@@ -133,7 +131,7 @@ RDS datastructures
.. _v4l2-rds-block-codes:
-.. tabularcolumns:: |p{6.4cm}|p{2.0cm}|p{1.2cm}|p{7.9cm}|
+.. tabularcolumns:: |p{6.4cm}|p{2.0cm}|p{1.2cm}|p{7.0cm}|
.. flat-table:: Block defines
:header-rows: 0
diff --git a/Documentation/userspace-api/media/v4l/dev-sdr.rst b/Documentation/userspace-api/media/v4l/dev-sdr.rst
index 80b25a7e8017..928884dfe09d 100644
--- a/Documentation/userspace-api/media/v4l/dev-sdr.rst
+++ b/Documentation/userspace-api/media/v4l/dev-sdr.rst
@@ -80,7 +80,7 @@ data transfer, set by the driver in order to inform application.
.. c:type:: v4l2_sdr_format
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
.. flat-table:: struct v4l2_sdr_format
:header-rows: 0
diff --git a/Documentation/userspace-api/media/v4l/dev-sliced-vbi.rst b/Documentation/userspace-api/media/v4l/dev-sliced-vbi.rst
index 213b736c9b67..97ec2b115c71 100644
--- a/Documentation/userspace-api/media/v4l/dev-sliced-vbi.rst
+++ b/Documentation/userspace-api/media/v4l/dev-sliced-vbi.rst
@@ -108,7 +108,7 @@ struct v4l2_sliced_vbi_format
\scriptsize
\setlength{\tabcolsep}{2pt}
-.. tabularcolumns:: |p{.85cm}|p{3.3cm}|p{4.4cm}|p{4.4cm}|p{4.4cm}|
+.. tabularcolumns:: |p{.85cm}|p{3.3cm}|p{4.45cm}|p{4.45cm}|p{4.45cm}|
.. cssclass:: longtable
@@ -213,9 +213,9 @@ Sliced VBI services
.. raw:: latex
- \scriptsize
+ \footnotesize
-.. tabularcolumns:: |p{4.1cm}|p{1.1cm}|p{2.4cm}|p{2.0cm}|p{7.3cm}|
+.. tabularcolumns:: |p{4.2cm}|p{1.1cm}|p{2.1cm}|p{2.0cm}|p{6.5cm}|
.. flat-table::
:header-rows: 1
@@ -307,7 +307,7 @@ struct :c:type:`v4l2_sliced_vbi_data` elements must be zero.
struct v4l2_sliced_vbi_data
---------------------------
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{1.2cm}|p{2.2cm}|p{13.9cm}|
.. flat-table::
:header-rows: 0
@@ -464,7 +464,7 @@ number).
struct v4l2_mpeg_vbi_fmt_ivtv
-----------------------------
-.. tabularcolumns:: |p{1.0cm}|p{3.8cm}|p{1.0cm}|p{11.2cm}|
+.. tabularcolumns:: |p{4.2cm}|p{2.0cm}|p{11.1cm}|
.. flat-table::
:header-rows: 0
@@ -499,7 +499,7 @@ struct v4l2_mpeg_vbi_fmt_ivtv
Magic Constants for struct v4l2_mpeg_vbi_fmt_ivtv magic field
-------------------------------------------------------------
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
.. flat-table::
:header-rows: 1
@@ -528,7 +528,11 @@ Magic Constants for struct v4l2_mpeg_vbi_fmt_ivtv magic field
structs v4l2_mpeg_vbi_itv0 and v4l2_mpeg_vbi_ITV0
-------------------------------------------------
-.. tabularcolumns:: |p{5.2cm}|p{2.4cm}|p{9.9cm}|
+.. raw:: latex
+
+ \footnotesize
+
+.. tabularcolumns:: |p{4.6cm}|p{2.0cm}|p{10.7cm}|
.. flat-table::
:header-rows: 0
@@ -569,13 +573,16 @@ structs v4l2_mpeg_vbi_itv0 and v4l2_mpeg_vbi_ITV0
one line of unspecified data that should be ignored by
applications.
+.. raw:: latex
+
+ \normalsize
.. _v4l2-mpeg-vbi-itv0-1:
struct v4l2_mpeg_vbi_ITV0
-------------------------
-.. tabularcolumns:: |p{5.2cm}|p{2.4cm}|p{9.9cm}|
+.. tabularcolumns:: |p{5.2cm}|p{2.4cm}|p{9.7cm}|
.. flat-table::
:header-rows: 0
@@ -596,7 +603,7 @@ struct v4l2_mpeg_vbi_ITV0
struct v4l2_mpeg_vbi_itv0_line
------------------------------
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
.. flat-table::
:header-rows: 0
@@ -618,7 +625,7 @@ struct v4l2_mpeg_vbi_itv0_line
Line Identifiers for struct v4l2_mpeg_vbi_itv0_line id field
------------------------------------------------------------
-.. tabularcolumns:: |p{7.0cm}|p{1.8cm}|p{8.7cm}|
+.. tabularcolumns:: |p{7.0cm}|p{1.8cm}|p{8.5cm}|
.. flat-table::
:header-rows: 1
diff --git a/Documentation/userspace-api/media/v4l/dev-subdev.rst b/Documentation/userspace-api/media/v4l/dev-subdev.rst
index 2aa8157efae1..fd1de0a73a9f 100644
--- a/Documentation/userspace-api/media/v4l/dev-subdev.rst
+++ b/Documentation/userspace-api/media/v4l/dev-subdev.rst
@@ -209,9 +209,11 @@ list entity names and pad numbers).
.. raw:: latex
+ \begingroup
\scriptsize
+ \setlength{\tabcolsep}{2pt}
-.. tabularcolumns:: |p{2.0cm}|p{2.3cm}|p{2.3cm}|p{2.3cm}|p{2.3cm}|p{2.3cm}|p{2.3cm}|
+.. tabularcolumns:: |p{2.0cm}|p{2.1cm}|p{2.1cm}|p{2.1cm}|p{2.1cm}|p{2.1cm}|p{2.1cm}|
.. _sample-pipeline-config:
@@ -298,7 +300,7 @@ list entity names and pad numbers).
.. raw:: latex
- \normalsize
+ \endgroup
1. Initial state. The sensor source pad format is set to its native 3MP
size and V4L2_MBUS_FMT_SGRBG8_1X8 media bus code. Formats on the
diff --git a/Documentation/userspace-api/media/v4l/diff-v4l.rst b/Documentation/userspace-api/media/v4l/diff-v4l.rst
index caa05fbbd396..33243ecb5033 100644
--- a/Documentation/userspace-api/media/v4l/diff-v4l.rst
+++ b/Documentation/userspace-api/media/v4l/diff-v4l.rst
@@ -72,7 +72,11 @@ and radio devices supporting a set of related functions like video
capturing, video overlay and VBI capturing. See :ref:`open` for an
introduction.
-.. tabularcolumns:: |p{5.5cm}|p{6.5cm}|p{5.5cm}
+.. raw:: latex
+
+ \small
+
+.. tabularcolumns:: |p{5.3cm}|p{6.7cm}|p{5.3cm}|
.. cssclass:: longtable
@@ -148,6 +152,10 @@ introduction.
- ``-``
- See above.
+.. raw:: latex
+
+ \normalsize
+
The ``audios`` field was replaced by ``capabilities`` flag
``V4L2_CAP_AUDIO``, indicating *if* the device has any audio inputs or
outputs. To determine their number applications can enumerate audio
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst
index c05a2d2c675d..4c5061aa9cd4 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst
@@ -32,6 +32,7 @@ enum v4l2_exposure_auto_type -
should ignore such requests. Possible values are:
+.. tabularcolumns:: |p{7.1cm}|p{10.4cm}|
.. flat-table::
:header-rows: 0
@@ -81,7 +82,7 @@ enum v4l2_exposure_metering -
Determines how the camera measures the amount of light available for
the frame exposure. Possible values are:
-.. tabularcolumns:: |p{8.7cm}|p{8.8cm}|
+.. tabularcolumns:: |p{8.7cm}|p{8.7cm}|
.. flat-table::
:header-rows: 0
@@ -173,7 +174,7 @@ enum v4l2_exposure_metering -
control may stop updates of the ``V4L2_CID_AUTO_FOCUS_STATUS``
control value.
-.. tabularcolumns:: |p{6.7cm}|p{10.8cm}|
+.. tabularcolumns:: |p{6.8cm}|p{10.7cm}|
.. flat-table::
:header-rows: 0
@@ -199,7 +200,7 @@ enum v4l2_exposure_metering -
enum v4l2_auto_focus_range -
Determines auto focus distance range for which lens may be adjusted.
-.. tabularcolumns:: |p{6.8cm}|p{10.7cm}|
+.. tabularcolumns:: |p{6.9cm}|p{10.6cm}|
.. flat-table::
:header-rows: 0
@@ -274,7 +275,7 @@ enum v4l2_auto_n_preset_white_balance -
representation. The following white balance presets are listed in
order of increasing color temperature.
-.. tabularcolumns:: |p{7.2 cm}|p{10.3cm}|
+.. tabularcolumns:: |p{7.4cm}|p{10.1cm}|
.. flat-table::
:header-rows: 0
@@ -384,7 +385,9 @@ enum v4l2_scene_mode -
\small
-.. tabularcolumns:: |p{5.9cm}|p{11.5cm}|
+.. tabularcolumns:: |p{5.9cm}|p{11.6cm}|
+
+.. cssclass:: longtable
.. flat-table::
:header-rows: 0
@@ -519,6 +522,7 @@ enum v4l2_scene_mode -
have the ``V4L2_CAMERA_ORIENTATION_EXTERNAL`` orientation.
+.. tabularcolumns:: |p{7.7cm}|p{9.8cm}|
.. flat-table::
:header-rows: 0
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst
index 360165c4d98f..681f59e0a8f5 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst
@@ -34,7 +34,11 @@ Stateless Codec Control ID
.. c:type:: v4l2_ctrl_h264_sps
-.. cssclass:: longtable
+.. raw:: latex
+
+ \small
+
+.. tabularcolumns:: |p{1.2cm}|p{8.6cm}|p{7.5cm}|
.. flat-table:: struct v4l2_ctrl_h264_sps
:header-rows: 0
@@ -96,6 +100,10 @@ Stateless Codec Control ID
- ``flags``
- See :ref:`Sequence Parameter Set Flags <h264_sps_flags>`
+.. raw:: latex
+
+ \normalsize
+
.. _h264_sps_constraints_set_flags:
``Sequence Parameter Set Constraints Set Flags``
@@ -171,7 +179,9 @@ Stateless Codec Control ID
.. c:type:: v4l2_ctrl_h264_pps
-.. cssclass:: longtable
+.. raw:: latex
+
+ \small
.. flat-table:: struct v4l2_ctrl_h264_pps
:header-rows: 0
@@ -273,7 +283,11 @@ Stateless Codec Control ID
.. c:type:: v4l2_ctrl_h264_scaling_matrix
-.. cssclass:: longtable
+.. raw:: latex
+
+ \small
+
+.. tabularcolumns:: |p{0.6cm}|p{4.8cm}|p{11.9cm}|
.. flat-table:: struct v4l2_ctrl_h264_scaling_matrix
:header-rows: 0
@@ -304,7 +318,11 @@ Stateless Codec Control ID
.. c:type:: v4l2_ctrl_h264_slice_params
-.. cssclass:: longtable
+.. raw:: latex
+
+ \small
+
+.. tabularcolumns:: |p{4.0cm}|p{5.9cm}|p{7.4cm}|
.. flat-table:: struct v4l2_ctrl_h264_slice_params
:header-rows: 0
@@ -347,11 +365,11 @@ Stateless Codec Control ID
* - __u8
- ``num_ref_idx_l0_active_minus1``
- If num_ref_idx_active_override_flag is not set, this field must be
- set to the value of num_ref_idx_l0_default_active_minus1.
+ set to the value of num_ref_idx_l0_default_active_minus1
* - __u8
- ``num_ref_idx_l1_active_minus1``
- If num_ref_idx_active_override_flag is not set, this field must be
- set to the value of num_ref_idx_l1_default_active_minus1.
+ set to the value of num_ref_idx_l1_default_active_minus1
* - __u8
- ``reserved``
- Applications and drivers must set this to zero.
@@ -365,6 +383,10 @@ Stateless Codec Control ID
- ``flags``
- See :ref:`Slice Parameter Flags <h264_slice_flags>`
+.. raw:: latex
+
+ \normalsize
+
.. _h264_slice_flags:
``Slice Parameter Set Flags``
@@ -392,7 +414,11 @@ Stateless Codec Control ID
.. c:type:: v4l2_ctrl_h264_pred_weights
-.. cssclass:: longtable
+.. raw:: latex
+
+ \small
+
+.. tabularcolumns:: |p{4.9cm}|p{4.9cm}|p{7.5cm}|
.. flat-table:: struct v4l2_ctrl_h264_pred_weights
:header-rows: 0
@@ -410,9 +436,17 @@ Stateless Codec Control ID
- The weight factors at index 0 are the weight factors for the reference
list 0, the one at index 1 for the reference list 1.
+.. raw:: latex
+
+ \normalsize
+
.. c:type:: v4l2_h264_weight_factors
-.. cssclass:: longtable
+.. raw:: latex
+
+ \small
+
+.. tabularcolumns:: |p{1.0cm}|p{4.5cm}|p{11.8cm}|
.. flat-table:: struct v4l2_h264_weight_factors
:header-rows: 0
@@ -432,6 +466,10 @@ Stateless Codec Control ID
- ``chroma_offset[32][2]``
-
+.. raw:: latex
+
+ \normalsize
+
``Picture Reference``
.. c:type:: v4l2_h264_reference
@@ -454,7 +492,11 @@ Stateless Codec Control ID
``Reference Fields``
-.. cssclass:: longtable
+.. raw:: latex
+
+ \small
+
+.. tabularcolumns:: |p{5.4cm}|p{0.8cm}|p{11.1cm}|
.. flat-table::
:header-rows: 0
@@ -472,6 +514,10 @@ Stateless Codec Control ID
- The frame (or the top/bottom fields, if it's a field pair)
is used for short-term reference.
+.. raw:: latex
+
+ \normalsize
+
``V4L2_CID_STATELESS_H264_DECODE_PARAMS (struct)``
Specifies the decode parameters (as extracted from the bitstream)
for the associated H264 slice data. This includes the necessary
@@ -483,7 +529,11 @@ Stateless Codec Control ID
.. c:type:: v4l2_ctrl_h264_decode_params
-.. cssclass:: longtable
+.. raw:: latex
+
+ \small
+
+.. tabularcolumns:: |p{4.0cm}|p{5.9cm}|p{7.4cm}|
.. flat-table:: struct v4l2_ctrl_h264_decode_params
:header-rows: 0
@@ -538,11 +588,19 @@ Stateless Codec Control ID
- ``flags``
- See :ref:`Decode Parameters Flags <h264_decode_params_flags>`
+.. raw:: latex
+
+ \normalsize
+
.. _h264_decode_params_flags:
``Decode Parameters Flags``
-.. cssclass:: longtable
+.. raw:: latex
+
+ \small
+
+.. tabularcolumns:: |p{8.3cm}|p{2.1cm}|p{6.9cm}|
.. flat-table::
:header-rows: 0
@@ -559,9 +617,17 @@ Stateless Codec Control ID
- 0x00000004
-
+.. raw:: latex
+
+ \normalsize
+
.. c:type:: v4l2_h264_dpb_entry
-.. cssclass:: longtable
+.. raw:: latex
+
+ \small
+
+.. tabularcolumns:: |p{1.0cm}|p{4.9cm}|p{11.4cm}|
.. flat-table:: struct v4l2_h264_dpb_entry
:header-rows: 0
@@ -597,11 +663,19 @@ Stateless Codec Control ID
- ``flags``
- See :ref:`DPB Entry Flags <h264_dpb_flags>`
+.. raw:: latex
+
+ \normalsize
+
.. _h264_dpb_flags:
``DPB Entries Flags``
-.. cssclass:: longtable
+.. raw:: latex
+
+ \small
+
+.. tabularcolumns:: |p{7.7cm}|p{2.1cm}|p{7.5cm}|
.. flat-table::
:header-rows: 0
@@ -621,6 +695,10 @@ Stateless Codec Control ID
- 0x00000008
- The DPB entry is a single field or a complementary field pair.
+.. raw:: latex
+
+ \normalsize
+
``V4L2_CID_STATELESS_H264_DECODE_MODE (enum)``
Specifies the decoding mode to use. Currently exposes slice-based and
frame-based decoding but new modes might be added later on.
@@ -633,7 +711,11 @@ Stateless Codec Control ID
.. c:type:: v4l2_stateless_h264_decode_mode
-.. cssclass:: longtable
+.. raw:: latex
+
+ \scriptsize
+
+.. tabularcolumns:: |p{7.4cm}|p{0.3cm}|p{9.6cm}|
.. flat-table::
:header-rows: 0
@@ -658,6 +740,10 @@ Stateless Codec Control ID
selected, the ``V4L2_CID_STATELESS_H264_SLICE_PARAMS``
control shall not be set.
+.. raw:: latex
+
+ \normalsize
+
``V4L2_CID_STATELESS_H264_START_CODE (enum)``
Specifies the H264 slice start code expected for each slice.
This control is used as a modifier for V4L2_PIX_FMT_H264_SLICE
@@ -669,12 +755,16 @@ Stateless Codec Control ID
.. c:type:: v4l2_stateless_h264_start_code
-.. cssclass:: longtable
+.. raw:: latex
+
+ \small
+
+.. tabularcolumns:: |p{7.9cm}|p{0.4cm}|p{9.0cm}|
.. flat-table::
:header-rows: 0
:stub-columns: 0
- :widths: 1 1 2
+ :widths: 4 1 4
* - ``V4L2_STATELESS_H264_START_CODE_NONE``
- 0
@@ -686,6 +776,9 @@ Stateless Codec Control ID
to be prefixed by Annex B start codes. According to :ref:`h264`
valid start codes can be 3-bytes 0x000001 or 4-bytes 0x00000001.
+.. raw:: latex
+
+ \normalsize
.. _codec-stateless-fwht:
@@ -697,9 +790,11 @@ Stateless Codec Control ID
.. c:type:: v4l2_ctrl_fwht_params
-.. cssclass:: longtable
+.. raw:: latex
-.. tabularcolumns:: |p{1.4cm}|p{4.3cm}|p{11.8cm}|
+ \small
+
+.. tabularcolumns:: |p{1.4cm}|p{3.9cm}|p{12.0cm}|
.. flat-table:: struct v4l2_ctrl_fwht_params
:header-rows: 0
@@ -738,16 +833,20 @@ Stateless Codec Control ID
- ``quantization``
- The quantization range, from enum :c:type:`v4l2_quantization`.
+.. raw:: latex
+ \normalsize
.. _fwht-flags:
FWHT Flags
==========
-.. cssclass:: longtable
+.. raw:: latex
-.. tabularcolumns:: |p{6.8cm}|p{2.4cm}|p{8.3cm}|
+ \small
+
+.. tabularcolumns:: |p{7.0cm}|p{2.3cm}|p{8.0cm}|
.. flat-table::
:header-rows: 0
@@ -805,3 +904,7 @@ FWHT Flags
* - ``V4L2_FWHT_FL_PIXENC_HSV``
- 0x00180000
- Set if the pixel encoding is HSV.
+
+.. raw:: latex
+
+ \normalsize
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
index abf64e5500e0..9ddc42a254e4 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
@@ -392,7 +392,7 @@ enum v4l2_mpeg_audio_mode_extension -
which subbands are in intensity stereo. All other subbands are coded
in stereo. Layer III is not (yet) supported. Possible values are:
-
+.. tabularcolumns:: |p{9.1cm}|p{8.4cm}|
.. flat-table::
:header-rows: 0
@@ -605,7 +605,7 @@ enum v4l2_mpeg_video_frame_skip_mode -
are:
-.. tabularcolumns:: |p{9.2cm}|p{8.3cm}|
+.. tabularcolumns:: |p{8.2cm}|p{9.3cm}|
.. raw:: latex
@@ -873,7 +873,11 @@ enum v4l2_mpeg_video_h264_profile -
The profile information for H264. Applicable to the H264 encoder.
Possible values are:
+.. raw:: latex
+ \small
+
+.. tabularcolumns:: |p{10.2cm}|p{7.3cm}|
.. flat-table::
:header-rows: 0
@@ -916,7 +920,9 @@ enum v4l2_mpeg_video_h264_profile -
* - ``V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_HIGH``
- Constrained High profile
+.. raw:: latex
+ \normalsize
.. _v4l2-mpeg-video-mpeg2-profile:
@@ -927,7 +933,11 @@ enum v4l2_mpeg_video_mpeg2_profile -
The profile information for MPEG2. Applicable to MPEG2 codecs.
Possible values are:
+.. raw:: latex
+ \small
+
+.. tabularcolumns:: |p{10.2cm}|p{7.3cm}|
.. flat-table::
:header-rows: 0
@@ -947,6 +957,9 @@ enum v4l2_mpeg_video_mpeg2_profile -
- Multi-view profile (MVP)
+.. raw:: latex
+
+ \normalsize
.. _v4l2-mpeg-video-mpeg4-profile:
@@ -957,7 +970,11 @@ enum v4l2_mpeg_video_mpeg4_profile -
The profile information for MPEG4. Applicable to the MPEG4 encoder.
Possible values are:
+.. raw:: latex
+ \small
+
+.. tabularcolumns:: |p{11.8cm}|p{5.7cm}|
.. flat-table::
:header-rows: 0
@@ -974,7 +991,9 @@ enum v4l2_mpeg_video_mpeg4_profile -
* - ``V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_CODING_EFFICIENCY``
- Advanced Coding Efficiency profile
+.. raw:: latex
+ \normalsize
``V4L2_CID_MPEG_VIDEO_MAX_REF_PIC (integer)``
The maximum number of reference pictures used for encoding.
@@ -1030,7 +1049,7 @@ enum v4l2_mpeg_video_h264_loop_filter_mode -
\small
-.. tabularcolumns:: |p{13.6cm}|p{3.9cm}|
+.. tabularcolumns:: |p{13.5cm}|p{4.0cm}|
.. flat-table::
:header-rows: 0
@@ -1413,7 +1432,7 @@ enum v4l2_mpeg_video_h264_fmo_change_dir -
Specifies a direction of the slice group change for raster and wipe
maps. Applicable to the H264 encoder. Possible values are:
-
+.. tabularcolumns:: |p{9.6cm}|p{7.9cm}|
.. flat-table::
:header-rows: 0
@@ -1517,9 +1536,9 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
.. c:type:: v4l2_ctrl_mpeg2_slice_params
-.. cssclass:: longtable
+.. tabularcolumns:: |p{5.6cm}|p{4.6cm}|p{7.1cm}|
-.. tabularcolumns:: |p{5.8cm}|p{4.8cm}|p{6.6cm}|
+.. cssclass:: longtable
.. flat-table:: struct v4l2_ctrl_mpeg2_slice_params
:header-rows: 0
@@ -1562,7 +1581,7 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
.. cssclass:: longtable
-.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}|
+.. tabularcolumns:: |p{1.4cm}|p{6.5cm}|p{9.4cm}|
.. flat-table:: struct v4l2_mpeg2_sequence
:header-rows: 0
@@ -1593,9 +1612,13 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
.. c:type:: v4l2_mpeg2_picture
+.. raw:: latex
+
+ \small
+
.. cssclass:: longtable
-.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}|
+.. tabularcolumns:: |p{1.0cm}|p{5.6cm}|p{10.7cm}|
.. flat-table:: struct v4l2_mpeg2_picture
:header-rows: 0
@@ -1643,6 +1666,10 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
- ``progressive_frame``
- Indicates whether the current frame is progressive.
+.. raw:: latex
+
+ \normalsize
+
``V4L2_CID_MPEG_VIDEO_MPEG2_QUANTIZATION (struct)``
Specifies quantization matrices (as extracted from the bitstream) for the
associated MPEG-2 slice data.
@@ -1654,9 +1681,9 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
.. c:type:: v4l2_ctrl_mpeg2_quantization
-.. cssclass:: longtable
+.. tabularcolumns:: |p{0.8cm}|p{8.0cm}|p{8.5cm}|
-.. tabularcolumns:: |p{1.2cm}|p{8.0cm}|p{7.4cm}|
+.. cssclass:: longtable
.. raw:: latex
@@ -1707,6 +1734,10 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
non-intra-coded frames, in zigzag scanning order. Only relevant for
non-4:2:0 YUV formats.
+.. raw:: latex
+
+ \normalsize
+
``V4L2_CID_FWHT_I_FRAME_QP (integer)``
Quantization parameter for an I frame for FWHT. Valid range: from 1
to 31.
@@ -1730,10 +1761,14 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
.. c:type:: v4l2_ctrl_vp8_frame_header
+.. raw:: latex
+
+ \small
+
+.. tabularcolumns:: |p{7.0cm}|p{4.6cm}|p{5.7cm}|
+
.. cssclass:: longtable
-.. tabularcolumns:: |p{5.8cm}|p{4.8cm}|p{6.6cm}|
-
.. flat-table:: struct v4l2_ctrl_vp8_frame_header
:header-rows: 0
:stub-columns: 0
@@ -1820,10 +1855,16 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
- ``flags``
- See :ref:`Frame Header Flags <vp8_frame_header_flags>`
+.. raw:: latex
+
+ \normalsize
+
.. _vp8_frame_header_flags:
``Frame Header Flags``
+.. tabularcolumns:: |p{9.8cm}|p{0.8cm}|p{6.7cm}|
+
.. cssclass:: longtable
.. flat-table::
@@ -1854,7 +1895,7 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
.. cssclass:: longtable
-.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}|
+.. tabularcolumns:: |p{1.0cm}|p{2.0cm}|p{14.3cm}|
.. flat-table:: struct v4l2_vp8_entropy_coder_state
:header-rows: 0
@@ -1878,7 +1919,7 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
.. cssclass:: longtable
-.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}|
+.. tabularcolumns:: |p{1.2cm}|p{4.0cm}|p{12.1cm}|
.. flat-table:: struct v4l2_vp8_segment_header
:header-rows: 0
@@ -1905,7 +1946,11 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
``Segment Header Flags``
-.. cssclass:: longtable
+.. raw:: latex
+
+ \small
+
+.. tabularcolumns:: |p{10cm}|p{1.0cm}|p{6.3cm}|
.. flat-table::
:header-rows: 0
@@ -1926,11 +1971,15 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
- If is set, the segment feature data mode is delta-value.
If cleared, it's absolute-value.
+.. raw:: latex
+
+ \normalsize
+
.. c:type:: v4l2_vp8_loopfilter_header
.. cssclass:: longtable
-.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}|
+.. tabularcolumns:: |p{1.5cm}|p{3.9cm}|p{11.9cm}|
.. flat-table:: struct v4l2_vp8_loopfilter_header
:header-rows: 0
@@ -1960,7 +2009,7 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
``Loopfilter Header Flags``
-.. cssclass:: longtable
+.. tabularcolumns:: |p{7.0cm}|p{1.2cm}|p{9.1cm}|
.. flat-table::
:header-rows: 0
@@ -1980,9 +2029,7 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
.. c:type:: v4l2_vp8_quantization_header
-.. cssclass:: longtable
-
-.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}|
+.. tabularcolumns:: |p{1.5cm}|p{3.5cm}|p{12.3cm}|
.. flat-table:: struct v4l2_vp8_quantization_header
:header-rows: 0
@@ -2015,7 +2062,7 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
.. cssclass:: longtable
-.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}|
+.. tabularcolumns:: |p{1.5cm}|p{5.8cm}|p{10.0cm}|
.. flat-table:: struct v4l2_vp8_entropy_header
:header-rows: 0
@@ -2155,7 +2202,7 @@ enum v4l2_mpeg_mfc51_video_frame_skip_mode -
are:
-.. tabularcolumns:: |p{9.2cm}|p{8.3cm}|
+.. tabularcolumns:: |p{9.4cm}|p{8.1cm}|
.. raw:: latex
@@ -2199,7 +2246,7 @@ enum v4l2_mpeg_mfc51_video_force_frame_type -
Force a frame type for the next queued buffer. Applicable to
encoders. Possible values are:
-.. tabularcolumns:: |p{9.5cm}|p{8.0cm}|
+.. tabularcolumns:: |p{9.9cm}|p{7.6cm}|
.. flat-table::
:header-rows: 0
@@ -2235,6 +2282,7 @@ enum v4l2_mpeg_cx2341x_video_spatial_filter_mode -
are:
+.. tabularcolumns:: |p{11.5cm}|p{6.0cm}|
.. flat-table::
:header-rows: 0
@@ -2260,11 +2308,11 @@ enum v4l2_mpeg_cx2341x_video_luma_spatial_filter_type -
Select the algorithm to use for the Luma Spatial Filter (default
``1D_HOR``). Possible values:
-.. tabularcolumns:: |p{14.5cm}|p{3.0cm}|
+.. tabularcolumns:: |p{13.1cm}|p{4.4cm}|
.. raw:: latex
- \small
+ \footnotesize
.. flat-table::
:header-rows: 0
@@ -2285,8 +2333,6 @@ enum v4l2_mpeg_cx2341x_video_luma_spatial_filter_type -
\normalsize
-
-
.. _chroma-spatial-filter-type:
``V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE``
@@ -2296,8 +2342,11 @@ enum v4l2_mpeg_cx2341x_video_chroma_spatial_filter_type -
Select the algorithm for the Chroma Spatial Filter (default
``1D_HOR``). Possible values are:
+.. raw:: latex
-.. tabularcolumns:: |p{14.0cm}|p{3.5cm}|
+ \footnotesize
+
+.. tabularcolumns:: |p{11.0cm}|p{6.5cm}|
.. flat-table::
:header-rows: 0
@@ -2308,7 +2357,9 @@ enum v4l2_mpeg_cx2341x_video_chroma_spatial_filter_type -
* - ``V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR``
- One-dimensional horizontal
+.. raw:: latex
+ \normalsize
.. _v4l2-mpeg-cx2341x-video-temporal-filter-mode:
@@ -2319,7 +2370,9 @@ enum v4l2_mpeg_cx2341x_video_temporal_filter_mode -
Sets the Temporal Filter mode (default ``MANUAL``). Possible values
are:
+.. raw:: latex
+ \footnotesize
.. flat-table::
:header-rows: 0
@@ -2330,7 +2383,9 @@ enum v4l2_mpeg_cx2341x_video_temporal_filter_mode -
* - ``V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO``
- Choose the filter automatically
+.. raw:: latex
+ \normalsize
``V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER (integer (0-31))``
The setting for the Temporal Filter. 0 = off, 31 = maximum. (Default
@@ -2345,6 +2400,11 @@ enum v4l2_mpeg_cx2341x_video_median_filter_type -
Median Filter Type (default ``OFF``). Possible values are:
+.. raw:: latex
+
+ \small
+
+.. tabularcolumns:: |p{11.0cm}|p{6.5cm}|
.. flat-table::
:header-rows: 0
@@ -2361,7 +2421,9 @@ enum v4l2_mpeg_cx2341x_video_median_filter_type -
* - ``V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_DIAG``
- Diagonal filter
+.. raw:: latex
+ \normalsize
``V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM (integer (0-255))``
Threshold above which the luminance median filter is enabled
@@ -2438,7 +2500,7 @@ enum v4l2_vp8_num_ref_frames -
The number of reference pictures for encoding P frames. Possible
values are:
-.. tabularcolumns:: |p{7.9cm}|p{9.6cm}|
+.. tabularcolumns:: |p{7.5cm}|p{7.5cm}|
.. raw:: latex
@@ -2493,7 +2555,7 @@ enum v4l2_vp8_golden_frame_sel -
\scriptsize
-.. tabularcolumns:: |p{9.0cm}|p{8.0cm}|
+.. tabularcolumns:: |p{8.6cm}|p{8.9cm}|
.. flat-table::
:header-rows: 0
@@ -2667,7 +2729,7 @@ enum v4l2_mpeg_video_hevc_hier_coding_type -
\footnotesize
-.. tabularcolumns:: |p{9.0cm}|p{8.0cm}|
+.. tabularcolumns:: |p{8.2cm}|p{9.3cm}|
.. flat-table::
:header-rows: 0
@@ -2736,7 +2798,7 @@ enum v4l2_mpeg_video_hevc_profile -
\footnotesize
-.. tabularcolumns:: |p{9.0cm}|p{8.0cm}|
+.. tabularcolumns:: |p{9.0cm}|p{8.5cm}|
.. flat-table::
:header-rows: 0
@@ -2854,7 +2916,7 @@ enum v4l2_mpeg_video_hevc_hier_refresh_type -
\footnotesize
-.. tabularcolumns:: |p{8.0cm}|p{9.0cm}|
+.. tabularcolumns:: |p{6.2cm}|p{11.3cm}|
.. flat-table::
:header-rows: 0
@@ -2934,7 +2996,7 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
\footnotesize
-.. tabularcolumns:: |p{6.0cm}|p{11.0cm}|
+.. tabularcolumns:: |p{5.5cm}|p{12.0cm}|
.. flat-table::
:header-rows: 0
@@ -2994,6 +3056,12 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
.. c:type:: v4l2_ctrl_hevc_sps
+.. raw:: latex
+
+ \small
+
+.. tabularcolumns:: |p{1.2cm}|p{9.2cm}|p{6.9cm}|
+
.. cssclass:: longtable
.. flat-table:: struct v4l2_ctrl_hevc_sps
@@ -3068,10 +3136,18 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
- ``flags``
- See :ref:`Sequence Parameter Set Flags <hevc_sps_flags>`
+.. raw:: latex
+
+ \normalsize
+
.. _hevc_sps_flags:
``Sequence Parameter Set Flags``
+.. raw:: latex
+
+ \small
+
.. cssclass:: longtable
.. flat-table::
@@ -3107,6 +3183,10 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
- 0x00000100
-
+.. raw:: latex
+
+ \normalsize
+
``V4L2_CID_MPEG_VIDEO_HEVC_PPS (struct)``
Specifies the Picture Parameter Set fields (as extracted from the
bitstream) for the associated HEVC slice data.
@@ -3116,6 +3196,8 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
.. c:type:: v4l2_ctrl_hevc_pps
+.. tabularcolumns:: |p{1.2cm}|p{8.6cm}|p{7.5cm}|
+
.. cssclass:: longtable
.. flat-table:: struct v4l2_ctrl_hevc_pps
@@ -3170,7 +3252,9 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
``Picture Parameter Set Flags``
-.. cssclass:: longtable
+.. raw:: latex
+
+ \small
.. flat-table::
:header-rows: 0
@@ -3235,6 +3319,10 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
- 0x00040000
-
+.. raw:: latex
+
+ \normalsize
+
``V4L2_CID_MPEG_VIDEO_HEVC_SLICE_PARAMS (struct)``
Specifies various slice-specific parameters, especially from the NAL unit
header, general slice segment header and weighted prediction parameter
@@ -3245,6 +3333,12 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
.. c:type:: v4l2_ctrl_hevc_slice_params
+.. raw:: latex
+
+ \scriptsize
+
+.. tabularcolumns:: |p{5.4cm}|p{6.8cm}|p{5.1cm}|
+
.. cssclass:: longtable
.. flat-table:: struct v4l2_ctrl_hevc_slice_params
@@ -3347,11 +3441,17 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
- ``flags``
- See :ref:`Slice Parameters Flags <hevc_slice_params_flags>`
+.. raw:: latex
+
+ \normalsize
+
.. _hevc_slice_params_flags:
``Slice Parameters Flags``
-.. cssclass:: longtable
+.. raw:: latex
+
+ \scriptsize
.. flat-table::
:header-rows: 0
@@ -3386,9 +3486,17 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
- 0x00000100
-
+.. raw:: latex
+
+ \normalsize
+
.. c:type:: v4l2_hevc_dpb_entry
-.. cssclass:: longtable
+.. raw:: latex
+
+ \small
+
+.. tabularcolumns:: |p{1.0cm}|p{4.2cm}|p{12.1cm}|
.. flat-table:: struct v4l2_hevc_dpb_entry
:header-rows: 0
@@ -3420,9 +3528,17 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
- ``padding[2]``
- Applications and drivers must set this to zero.
+.. raw:: latex
+
+ \normalsize
+
.. c:type:: v4l2_hevc_pred_weight_table
-.. cssclass:: longtable
+.. raw:: latex
+
+ \footnotesize
+
+.. tabularcolumns:: |p{0.8cm}|p{10.6cm}|p{5.9cm}|
.. flat-table:: struct v4l2_hevc_pred_weight_table
:header-rows: 0
@@ -3463,6 +3579,10 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
- ``padding[6]``
- Applications and drivers must set this to zero.
+.. raw:: latex
+
+ \normalsize
+
``V4L2_CID_MPEG_VIDEO_HEVC_DECODE_MODE (enum)``
Specifies the decoding mode to use. Currently exposes slice-based and
frame-based decoding but new modes might be added later on.
@@ -3480,7 +3600,11 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
.. c:type:: v4l2_mpeg_video_hevc_decode_mode
-.. cssclass:: longtable
+.. raw:: latex
+
+ \small
+
+.. tabularcolumns:: |p{9.4cm}|p{0.6cm}|p{7.3cm}|
.. flat-table::
:header-rows: 0
@@ -3497,6 +3621,10 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
The OUTPUT buffer must contain all slices needed to decode the
frame. The OUTPUT buffer must also contain both fields.
+.. raw:: latex
+
+ \normalsize
+
``V4L2_CID_MPEG_VIDEO_HEVC_START_CODE (enum)``
Specifies the HEVC slice start code expected for each slice.
This control is used as a modifier for V4L2_PIX_FMT_HEVC_SLICE
@@ -3513,7 +3641,7 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
.. c:type:: v4l2_mpeg_video_hevc_start_code
-.. cssclass:: longtable
+.. tabularcolumns:: |p{9.2cm}|p{0.6cm}|p{7.5cm}|
.. flat-table::
:header-rows: 0
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-dv.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-dv.rst
index a6f696bf89dd..d2794e03ac6d 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-dv.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-dv.rst
@@ -99,7 +99,7 @@ enum v4l2_dv_it_content_type -
or an analog source. The enum v4l2_dv_it_content_type defines
the possible content types:
-.. tabularcolumns:: |p{7.3cm}|p{10.4cm}|
+.. tabularcolumns:: |p{7.3cm}|p{10.2cm}|
.. flat-table::
:header-rows: 0
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-flash.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-flash.rst
index ad4b878cd034..d22c5efb806a 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-flash.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-flash.rst
@@ -63,6 +63,7 @@ Flash Control IDs
presence of some faults. See V4L2_CID_FLASH_FAULT.
+.. tabularcolumns:: |p{5.7cm}|p{11.8cm}|
.. flat-table::
:header-rows: 0
@@ -73,14 +74,16 @@ Flash Control IDs
* - ``V4L2_FLASH_LED_MODE_FLASH``
- Flash mode.
* - ``V4L2_FLASH_LED_MODE_TORCH``
- - Torch mode. See V4L2_CID_FLASH_TORCH_INTENSITY.
+ - Torch mode.
+
+ See V4L2_CID_FLASH_TORCH_INTENSITY.
``V4L2_CID_FLASH_STROBE_SOURCE (menu)``
Defines the source of the flash LED strobe.
-.. tabularcolumns:: |p{7.5cm}|p{10.0cm}|
+.. tabularcolumns:: |p{7.5cm}|p{7.5cm}|
.. flat-table::
:header-rows: 0
diff --git a/Documentation/userspace-api/media/v4l/field-order.rst b/Documentation/userspace-api/media/v4l/field-order.rst
index 54548ea4308c..9a0ed8fc550f 100644
--- a/Documentation/userspace-api/media/v4l/field-order.rst
+++ b/Documentation/userspace-api/media/v4l/field-order.rst
@@ -62,7 +62,7 @@ enum v4l2_field
.. c:type:: v4l2_field
-.. tabularcolumns:: |p{5.8cm}|p{0.6cm}|p{11.1cm}|
+.. tabularcolumns:: |p{5.8cm}|p{0.6cm}|p{10.9cm}|
.. cssclass:: longtable
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-compressed.rst b/Documentation/userspace-api/media/v4l/pixfmt-compressed.rst
index acad5f3ca0c1..ba6c0c961204 100644
--- a/Documentation/userspace-api/media/v4l/pixfmt-compressed.rst
+++ b/Documentation/userspace-api/media/v4l/pixfmt-compressed.rst
@@ -7,7 +7,13 @@ Compressed Formats
.. _compressed-formats:
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. raw:: latex
+
+ \small
+
+.. tabularcolumns:: |p{5.8cm}|p{1.2cm}|p{10.3cm}|
+
+.. cssclass:: longtable
.. flat-table:: Compressed Image Formats
:header-rows: 1
@@ -220,3 +226,7 @@ Compressed Formats
Metadata associated with the frame to decode is required to be passed
through the ``V4L2_CID_STATELESS_FWHT_PARAMS`` control.
See the :ref:`associated Codec Control ID <codec-stateless-fwht>`.
+
+.. raw:: latex
+
+ \normalsize
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-packed-yuv.rst b/Documentation/userspace-api/media/v4l/pixfmt-packed-yuv.rst
index eb551b57557e..560fd2ead8ca 100644
--- a/Documentation/userspace-api/media/v4l/pixfmt-packed-yuv.rst
+++ b/Documentation/userspace-api/media/v4l/pixfmt-packed-yuv.rst
@@ -36,10 +36,10 @@ Cb\ :sub:`5-0` Cr\ :sub:`4-0`], and stored in memory in two bytes,
.. raw:: latex
\begingroup
- \tiny
+ \scriptsize
\setlength{\tabcolsep}{2pt}
-.. tabularcolumns:: |p{2.5cm}|p{0.69cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|p{0.31cm}|
+.. tabularcolumns:: |p{3.5cm}|p{0.96cm}|p{0.52cm}|p{0.52cm}|p{0.52cm}|p{0.52cm}|p{0.52cm}|p{0.52cm}|p{0.52cm}|p{0.52cm}|p{0.52cm}|p{0.52cm}|p{0.52cm}|p{0.52cm}|p{0.52cm}|p{0.52cm}|p{0.52cm}|p{0.52cm}|
.. flat-table:: Packed YUV 4:4:4 Image Formats (less than 8bpc)
:header-rows: 2
@@ -234,6 +234,12 @@ the second byte and Y'\ :sub:`7-0` in the third byte.
These formats, commonly referred to as YUYV or YUY2, subsample the chroma
components horizontally by 2, storing 2 pixels in 4 bytes.
+.. raw:: latex
+
+ \footnotesize
+
+.. tabularcolumns:: |p{3.4cm}|p{1.2cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|p{0.8cm}|
+
.. flat-table:: Packed YUV 4:2:2 Formats
:header-rows: 1
:stub-columns: 0
@@ -301,6 +307,10 @@ components horizontally by 2, storing 2 pixels in 4 bytes.
- Y'\ :sub:`3`
- Cb\ :sub:`2`
+.. raw:: latex
+
+ \normalsize
+
**Color Sample Location:**
Chroma samples are :ref:`interstitially sited<yuv-chroma-centered>`
horizontally.
@@ -312,6 +322,12 @@ horizontally.
This format subsamples the chroma components horizontally by 4, storing 8
pixels in 12 bytes.
+.. raw:: latex
+
+ \scriptsize
+
+.. tabularcolumns:: |p{2.9cm}|p{0.8cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|
+
.. flat-table:: Packed YUV 4:1:1 Formats
:header-rows: 1
:stub-columns: 0
@@ -348,11 +364,15 @@ pixels in 12 bytes.
- Y'\ :sub:`6`
- Y'\ :sub:`7`
+.. raw:: latex
+
+ \normalsize
+
.. note::
Do not confuse ``V4L2_PIX_FMT_Y41P`` with
:ref:`V4L2_PIX_FMT_YUV411P <V4L2-PIX-FMT-YUV411P>`. Y41P is derived from
- "YUV 4:1:1 *packed*", while YUV411P stands for "YUV 4:1:1 *planar*".
+ "YUV 4:1:1 **packed**", while YUV411P stands for "YUV 4:1:1 **planar**".
**Color Sample Location:**
Chroma samples are :ref:`interstitially sited<yuv-chroma-centered>`
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst b/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst
index c9231e18859b..253e4bcc949d 100644
--- a/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst
+++ b/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst
@@ -17,10 +17,14 @@ you think your format should be listed in a standard format section
please make a proposal on the linux-media mailing list.
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
.. _reserved-formats:
+.. raw:: latex
+
+ \small
+
.. flat-table:: Reserved Image Formats
:header-rows: 1
:stub-columns: 0
@@ -256,3 +260,7 @@ please make a proposal on the linux-media mailing list.
of tiles, resulting in 32-aligned resolutions for the luminance plane
and 16-aligned resolutions for the chrominance plane (with 2x2
subsampling).
+
+.. raw:: latex
+
+ \normalsize
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-rgb.rst b/Documentation/userspace-api/media/v4l/pixfmt-rgb.rst
index 897676ee2c9d..48b0f787274c 100644
--- a/Documentation/userspace-api/media/v4l/pixfmt-rgb.rst
+++ b/Documentation/userspace-api/media/v4l/pixfmt-rgb.rst
@@ -655,12 +655,7 @@ nomenclature that instead use the order of components as seen in a 24- or
.. raw:: latex
- \begingroup
- \tiny
- \setlength{\tabcolsep}{2pt}
-
-.. tabularcolumns:: |p{2.8cm}|p{2.0cm}|p{2.0cm}|p{2.0cm}|p{2.0cm}|p{2.0cm}|p{2.0cm}|p{2.0cm}|
-
+ \small
.. flat-table:: RGB Formats With 8 Bits Per Component
:header-rows: 1
@@ -765,7 +760,7 @@ nomenclature that instead use the order of components as seen in a 24- or
.. raw:: latex
- \endgroup
+ \normalsize
Deprecated RGB Formats
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb10-ipu3.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb10-ipu3.rst
index 5d4d260db7b5..3322b0600f1d 100644
--- a/Documentation/userspace-api/media/v4l/pixfmt-srggb10-ipu3.rst
+++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb10-ipu3.rst
@@ -27,7 +27,11 @@ Below is an example of a small image in V4L2_PIX_FMT_IPU3_SBGGR10 format.
**Byte Order.**
Each cell is one byte.
-.. tabularcolumns:: |p{0.8cm}|p{4.0cm}|p{4.0cm}|p{4.0cm}|p{4.0cm}|
+.. raw:: latex
+
+ \small
+
+.. tabularcolumns:: |p{0.8cm}|p{3.3cm}|p{3.3cm}|p{3.3cm}|p{3.3cm}|
.. flat-table::
@@ -335,3 +339,7 @@ Each cell is one byte.
- R\ :sub:`0323high`
- G\ :sub:`0324low`
- G\ :sub:`0324high`\ (bits 1--0)
+
+.. raw:: latex
+
+ \normalsize
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb10p.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb10p.rst
index dc52e827b5d3..fd5feb415531 100644
--- a/Documentation/userspace-api/media/v4l/pixfmt-srggb10p.rst
+++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb10p.rst
@@ -33,7 +33,7 @@ of a small V4L2_PIX_FMT_SBGGR10P image:
**Byte Order.**
Each cell is one byte.
-.. tabularcolumns:: |p{2.4cm}|p{1.4cm}|p{1.2cm}|p{1.2cm}|p{1.2cm}|p{6.4cm}|
+.. tabularcolumns:: |p{2.4cm}|p{1.4cm}|p{1.2cm}|p{1.2cm}|p{1.2cm}|p{9.3cm}|
.. flat-table::
:header-rows: 0
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb12p.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb12p.rst
index a2f8ebfceb84..b6e79e2f8ce4 100644
--- a/Documentation/userspace-api/media/v4l/pixfmt-srggb12p.rst
+++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb12p.rst
@@ -31,7 +31,7 @@ Below is an example of a small V4L2_PIX_FMT_SBGGR12P image:
**Byte Order.**
Each cell is one byte.
-.. tabularcolumns:: |p{2.2cm}|p{1.2cm}|p{1.2cm}|p{3.1cm}|p{1.2cm}|p{1.2cm}|p{3.1cm}|
+.. tabularcolumns:: |p{2.2cm}|p{1.2cm}|p{1.2cm}|p{3.1cm}|p{1.2cm}|p{1.2cm}|p{6.4cm}|
.. flat-table::
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb14p.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb14p.rst
index e25baedfca77..3572e42adb22 100644
--- a/Documentation/userspace-api/media/v4l/pixfmt-srggb14p.rst
+++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb14p.rst
@@ -36,9 +36,11 @@ Each cell is one byte.
.. raw:: latex
+ \begingroup
\footnotesize
+ \setlength{\tabcolsep}{2pt}
-.. tabularcolumns:: |p{1.8cm}|p{1.0cm}|p{1.0cm}|p{1.0cm}|p{1.1cm}|p{3.3cm}|p{3.3cm}|p{3.3cm}|
+.. tabularcolumns:: |p{1.6cm}|p{1.0cm}|p{1.0cm}|p{1.0cm}|p{1.0cm}|p{3.5cm}|p{3.5cm}|p{3.5cm}|
.. flat-table::
:header-rows: 0
@@ -141,5 +143,5 @@ Each cell is one byte.
.. raw:: latex
- \normalsize
+ \endgroup
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-v4l2-mplane.rst b/Documentation/userspace-api/media/v4l/pixfmt-v4l2-mplane.rst
index 977facc3a1f4..ad4da988c3a3 100644
--- a/Documentation/userspace-api/media/v4l/pixfmt-v4l2-mplane.rst
+++ b/Documentation/userspace-api/media/v4l/pixfmt-v4l2-mplane.rst
@@ -13,7 +13,7 @@ describing all planes of that format.
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{1.4cm}|p{4.0cm}|p{11.9cm}|
.. c:type:: v4l2_plane_pix_format
@@ -52,7 +52,7 @@ describing all planes of that format.
\small
-.. tabularcolumns:: |p{4.4cm}|p{5.6cm}|p{7.5cm}|
+.. tabularcolumns:: |p{4.4cm}|p{5.6cm}|p{7.3cm}|
.. c:type:: v4l2_pix_format_mplane
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-v4l2.rst b/Documentation/userspace-api/media/v4l/pixfmt-v4l2.rst
index 71e828093310..9c423ffe02f9 100644
--- a/Documentation/userspace-api/media/v4l/pixfmt-v4l2.rst
+++ b/Documentation/userspace-api/media/v4l/pixfmt-v4l2.rst
@@ -4,7 +4,7 @@
Single-planar format structure
******************************
-.. tabularcolumns:: |p{4.0cm}|p{2.5cm}|p{11.0cm}|
+.. tabularcolumns:: |p{4.0cm}|p{2.6cm}|p{10.7cm}|
.. c:type:: v4l2_pix_format
@@ -205,7 +205,7 @@ Single-planar format structure
the flag V4L2_FMT_FLAG_CSC_XFER_FUNC in the corresponding struct
:c:type:`v4l2_fmtdesc` during enumeration. See :ref:`fmtdesc-flags`.
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.8cm}|p{2.3cm}|p{8.2cm}|
.. _format-flags:
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yuv-luma.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuv-luma.rst
index 0c8c5e0a380e..91942c4f0967 100644
--- a/Documentation/userspace-api/media/v4l/pixfmt-yuv-luma.rst
+++ b/Documentation/userspace-api/media/v4l/pixfmt-yuv-luma.rst
@@ -19,6 +19,12 @@ are often referred to as greyscale formats.
- `0` denotes padding bits set to 0.
+.. raw:: latex
+
+ \scriptsize
+
+.. tabularcolumns:: |p{3.6cm}|p{3.0cm}|p{1.3cm}|p{2.6cm}|p{1.3cm}|p{1.3cm}|p{1.3cm}|
+
.. flat-table:: Luma-Only Image Formats
:header-rows: 1
:stub-columns: 0
@@ -119,6 +125,10 @@ are often referred to as greyscale formats.
- ...
- ...
+.. raw:: latex
+
+ \normalsize
+
.. note::
For the Y16 and Y16_BE formats, the actual sampling precision may be lower
diff --git a/Documentation/userspace-api/media/v4l/subdev-formats.rst b/Documentation/userspace-api/media/v4l/subdev-formats.rst
index 7f16cbe46e5c..cda3cd8e8855 100644
--- a/Documentation/userspace-api/media/v4l/subdev-formats.rst
+++ b/Documentation/userspace-api/media/v4l/subdev-formats.rst
@@ -5,10 +5,12 @@
Media Bus Formats
=================
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
.. c:type:: v4l2_mbus_framefmt
+.. tabularcolumns:: |p{2.0cm}|p{4.0cm}|p{11.3cm}|
+
+.. cssclass:: longtable
+
.. flat-table:: struct v4l2_mbus_framefmt
:header-rows: 0
:stub-columns: 0
@@ -113,6 +115,8 @@ Media Bus Formats
.. _v4l2-mbus-framefmt-flags:
+.. tabularcolumns:: |p{6.5cm}|p{1.6cm}|p{9.2cm}|
+
.. flat-table:: v4l2_mbus_framefmt Flags
:header-rows: 0
:stub-columns: 0
@@ -204,7 +208,7 @@ The following tables list existing packed RGB formats.
.. it switches to long table, and there's no way to override it.
-.. tabularcolumns:: |p{4.0cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
+.. tabularcolumns:: |p{5.0cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
.. _v4l2-mbus-pixelcode-rgb:
@@ -1890,7 +1894,7 @@ JEIDA defined bit mapping will be named
.. raw:: latex
- \tiny
+ \small
.. _v4l2-mbus-pixelcode-rgb-lvds:
@@ -2152,7 +2156,7 @@ organization is given as an example for the first pixel only.
\tiny
\setlength{\tabcolsep}{2pt}
-.. tabularcolumns:: |p{4.0cm}|p{0.7cm}|p{0.3cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
+.. tabularcolumns:: |p{6.0cm}|p{0.7cm}|p{0.3cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
.. _v4l2-mbus-pixelcode-bayer:
@@ -3005,7 +3009,7 @@ the following codes.
\tiny
\setlength{\tabcolsep}{2pt}
-.. tabularcolumns:: |p{4.0cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
+.. tabularcolumns:: |p{5.0cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
.. _v4l2-mbus-pixelcode-yuv8:
@@ -7210,7 +7214,7 @@ The following table list existing packed 36bit wide YUV formats.
\tiny
\setlength{\tabcolsep}{2pt}
-.. tabularcolumns:: |p{4.0cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
+.. tabularcolumns:: |p{4.1cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
.. _v4l2-mbus-pixelcode-yuv8-36bit:
@@ -7398,7 +7402,7 @@ The following table list existing packed 48bit wide YUV formats.
\tiny
\setlength{\tabcolsep}{2pt}
-.. tabularcolumns:: |p{4.0cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
+.. tabularcolumns:: |p{5.6cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|
.. _v4l2-mbus-pixelcode-yuv8-48bit:
@@ -7851,7 +7855,7 @@ The following table lists existing JPEG compressed formats.
.. _v4l2-mbus-pixelcode-jpeg:
-.. tabularcolumns:: |p{6.0cm}|p{1.4cm}|p{10.1cm}|
+.. tabularcolumns:: |p{6.0cm}|p{1.4cm}|p{9.9cm}|
.. flat-table:: JPEG Formats
:header-rows: 1
@@ -7884,7 +7888,7 @@ formats.
.. _v4l2-mbus-pixelcode-vendor-specific:
-.. tabularcolumns:: |p{8.0cm}|p{1.4cm}|p{7.7cm}|
+.. tabularcolumns:: |p{8.0cm}|p{1.4cm}|p{7.9cm}|
.. flat-table:: Vendor and device specific formats
:header-rows: 1
@@ -7909,7 +7913,7 @@ This section lists all metadata formats.
The following table lists the existing metadata formats.
-.. tabularcolumns:: |p{8.0cm}|p{1.4cm}|p{7.7cm}|
+.. tabularcolumns:: |p{8.0cm}|p{1.4cm}|p{7.9cm}|
.. flat-table:: Metadata formats
:header-rows: 1
diff --git a/Documentation/userspace-api/media/v4l/v4l2-selection-flags.rst b/Documentation/userspace-api/media/v4l/v4l2-selection-flags.rst
index 3a834d050110..1cb1531c1e52 100644
--- a/Documentation/userspace-api/media/v4l/v4l2-selection-flags.rst
+++ b/Documentation/userspace-api/media/v4l/v4l2-selection-flags.rst
@@ -6,10 +6,16 @@
Selection flags
***************
-.. tabularcolumns:: |p{5.2cm}|p{2.0cm}|p{6.5cm}|p{1.2cm}|p{1.6cm}|
-
.. _v4l2-selection-flags-table:
+.. raw:: latex
+
+ \small
+
+.. tabularcolumns:: |p{5.6cm}|p{2.0cm}|p{6.5cm}|p{1.2cm}|p{1.2cm}|
+
+.. cssclass:: longtable
+
.. flat-table:: Selection flag definitions
:header-rows: 1
:stub-columns: 0
@@ -42,3 +48,7 @@ Selection flags
inside the subdevice to all further processing steps.
- No
- Yes
+
+.. raw:: latex
+
+ \normalsize
diff --git a/Documentation/userspace-api/media/v4l/v4l2-selection-targets.rst b/Documentation/userspace-api/media/v4l/v4l2-selection-targets.rst
index e877ebbdb32e..b46bae984f35 100644
--- a/Documentation/userspace-api/media/v4l/v4l2-selection-targets.rst
+++ b/Documentation/userspace-api/media/v4l/v4l2-selection-targets.rst
@@ -12,7 +12,13 @@ of the two interfaces they are used.
.. _v4l2-selection-targets-table:
-.. tabularcolumns:: |p{6.0cm}|p{1.4cm}|p{7.4cm}|p{1.2cm}|p{1.4cm}|
+.. raw:: latex
+
+ \small
+
+.. tabularcolumns:: |p{6.2cm}|p{1.4cm}|p{7.3cm}|p{1.2cm}|p{0.8cm}|
+
+.. cssclass:: longtable
.. flat-table:: Selection target definitions
:header-rows: 1
@@ -69,3 +75,7 @@ of the two interfaces they are used.
modified by hardware.
- Yes
- No
+
+.. raw:: latex
+
+ \normalsize
diff --git a/Documentation/userspace-api/media/v4l/vidioc-create-bufs.rst b/Documentation/userspace-api/media/v4l/vidioc-create-bufs.rst
index b06e5b528e11..f98f18c9e91c 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-create-bufs.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-create-bufs.rst
@@ -72,7 +72,7 @@ than the number requested.
.. c:type:: v4l2_create_buffers
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
.. flat-table:: struct v4l2_create_buffers
:header-rows: 0
diff --git a/Documentation/userspace-api/media/v4l/vidioc-cropcap.rst b/Documentation/userspace-api/media/v4l/vidioc-cropcap.rst
index 00c31410d4e4..551ac9d3c6ef 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-cropcap.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-cropcap.rst
@@ -45,7 +45,7 @@ overlay devices.
.. c:type:: v4l2_cropcap
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
.. flat-table:: struct v4l2_cropcap
:header-rows: 0
@@ -96,7 +96,7 @@ overlay devices.
.. _v4l2-rect-crop:
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
.. flat-table:: struct v4l2_rect
:header-rows: 0
diff --git a/Documentation/userspace-api/media/v4l/vidioc-dbg-g-chip-info.rst b/Documentation/userspace-api/media/v4l/vidioc-dbg-g-chip-info.rst
index bde6e952b267..1a1e093936f1 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-dbg-g-chip-info.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-dbg-g-chip-info.rst
@@ -75,7 +75,7 @@ is available from the LinuxTV v4l-dvb repository; see
`https://linuxtv.org/repo/ <https://linuxtv.org/repo/>`__ for access
instructions.
-.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{3.5cm}|p{7.0cm}|
+.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{3.5cm}|p{6.6cm}|
.. _name-v4l2-dbg-match:
@@ -101,7 +101,7 @@ instructions.
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
.. c:type:: v4l2_dbg_chip_info
@@ -127,7 +127,7 @@ instructions.
- Reserved fields, both application and driver must set these to 0.
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
.. _name-chip-match-types:
diff --git a/Documentation/userspace-api/media/v4l/vidioc-dbg-g-register.rst b/Documentation/userspace-api/media/v4l/vidioc-dbg-g-register.rst
index e1a6abe705bd..53f10c7319b2 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-dbg-g-register.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-dbg-g-register.rst
@@ -85,7 +85,7 @@ It is available from the LinuxTV v4l-dvb repository; see
`https://linuxtv.org/repo/ <https://linuxtv.org/repo/>`__ for access
instructions.
-.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{3.5cm}|p{7.0cm}|
+.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{3.5cm}|p{6.6cm}|
.. c:type:: v4l2_dbg_match
@@ -131,7 +131,7 @@ instructions.
- The value read from, or to be written into the register.
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
.. _chip-match-types:
diff --git a/Documentation/userspace-api/media/v4l/vidioc-decoder-cmd.rst b/Documentation/userspace-api/media/v4l/vidioc-decoder-cmd.rst
index fd71ceece037..7a8f490131d8 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-decoder-cmd.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-decoder-cmd.rst
@@ -59,7 +59,7 @@ In principle, these ioctls are optional, not all drivers may support them. They
introduced in Linux 3.3. They are, however, mandatory for stateful mem2mem decoders
(as further documented in :ref:`decoder`).
-.. tabularcolumns:: |p{1.1cm}|p{2.4cm}|p{1.2cm}|p{1.6cm}|p{10.6cm}|
+.. tabularcolumns:: |p{2.0cm}|p{1.1cm}|p{2.2cm}|p{11.8cm}|
.. c:type:: v4l2_decoder_cmd
@@ -129,10 +129,12 @@ introduced in Linux 3.3. They are, however, mandatory for stateful mem2mem decod
-
-.. tabularcolumns:: |p{5.6cm}|p{0.6cm}|p{11.3cm}|
-
.. _decoder-cmds:
+.. tabularcolumns:: |p{5.6cm}|p{0.6cm}|p{11.1cm}|
+
+.. cssclass:: longtable
+
.. flat-table:: Decoder Commands
:header-rows: 0
:stub-columns: 0
diff --git a/Documentation/userspace-api/media/v4l/vidioc-dqevent.rst b/Documentation/userspace-api/media/v4l/vidioc-dqevent.rst
index 634af717c8ba..6eb40073c906 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-dqevent.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-dqevent.rst
@@ -37,11 +37,10 @@ structure are filled by the driver. The file handle will also receive
exceptions which the application may get by e.g. using the select system
call.
-.. tabularcolumns:: |p{3.0cm}|p{4.4cm}|p{2.4cm}|p{7.7cm}|
-
.. c:type:: v4l2_event
-.. cssclass: longtable
+.. tabularcolumns:: |p{3.0cm}|p{3.4cm}|p{10.9cm}|
+
.. flat-table:: struct v4l2_event
:header-rows: 0
@@ -98,7 +97,7 @@ call.
zero.
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.2cm}|p{2.6cm}|p{8.5cm}|
.. cssclass:: longtable
@@ -188,7 +187,7 @@ call.
- Base event number for driver-private events.
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
.. c:type:: v4l2_event_vsync
@@ -202,7 +201,7 @@ call.
- The upcoming field. See enum :c:type:`v4l2_field`.
-.. tabularcolumns:: |p{3.5cm}|p{3.0cm}|p{1.8cm}|p{8.5cm}|
+.. tabularcolumns:: |p{3.5cm}|p{3.0cm}|p{10.8cm}|
.. c:type:: v4l2_event_ctrl
@@ -252,7 +251,7 @@ call.
:ref:`v4l2_queryctrl <v4l2-queryctrl>`.
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
.. c:type:: v4l2_event_frame_sync
@@ -266,7 +265,7 @@ call.
- The sequence number of the frame being received.
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
.. c:type:: v4l2_event_src_change
@@ -281,7 +280,7 @@ call.
:ref:`src-changes-flags`.
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
.. c:type:: v4l2_event_motion_det
@@ -310,7 +309,7 @@ call.
automatically assigned to the default region 0.
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
.. _ctrl-changes-flags:
@@ -335,7 +334,7 @@ call.
step or the default value of the control changed.
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
.. _src-changes-flags:
diff --git a/Documentation/userspace-api/media/v4l/vidioc-dv-timings-cap.rst b/Documentation/userspace-api/media/v4l/vidioc-dv-timings-cap.rst
index 27bd6a83e42c..8ced100bb156 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-dv-timings-cap.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-dv-timings-cap.rst
@@ -55,7 +55,7 @@ the desired pad number in the struct
zero the ``reserved`` array. Attempts to query capabilities on a pad
that doesn't support them will return an ``EINVAL`` error code.
-.. tabularcolumns:: |p{1.2cm}|p{3.0cm}|p{13.3cm}|
+.. tabularcolumns:: |p{1.2cm}|p{3.2cm}|p{12.9cm}|
.. c:type:: v4l2_bt_timings_cap
@@ -96,7 +96,7 @@ that doesn't support them will return an ``EINVAL`` error code.
Drivers must set the array to zero.
-.. tabularcolumns:: |p{1.0cm}|p{4.0cm}|p{3.5cm}|p{9.2cm}|
+.. tabularcolumns:: |p{4.4cm}|p{3.6cm}|p{9.3cm}|
.. c:type:: v4l2_dv_timings_cap
@@ -128,7 +128,7 @@ that doesn't support them will return an ``EINVAL`` error code.
* - }
-
-.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+.. tabularcolumns:: |p{7.2cm}|p{10.3cm}|
.. _dv-bt-cap-capabilities:
diff --git a/Documentation/userspace-api/media/v4l/vidioc-encoder-cmd.rst b/Documentation/userspace-api/media/v4l/vidioc-encoder-cmd.rst
index 5673606711b4..2b5867a68b31 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-encoder-cmd.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-encoder-cmd.rst
@@ -66,7 +66,7 @@ These ioctls are optional, not all drivers may support them. They were
introduced in Linux 2.6.21. They are, however, mandatory for stateful mem2mem
encoders (as further documented in :ref:`encoder`).
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
.. c:type:: v4l2_encoder_cmd
@@ -89,7 +89,7 @@ encoders (as further documented in :ref:`encoder`).
the array to zero.
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
.. _encoder-cmds:
@@ -133,7 +133,7 @@ encoders (as further documented in :ref:`encoder`).
the encoder is already running, this command does nothing. No
flags are defined for this command.
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
.. _encoder-flags:
diff --git a/Documentation/userspace-api/media/v4l/vidioc-enum-dv-timings.rst b/Documentation/userspace-api/media/v4l/vidioc-enum-dv-timings.rst
index 20730cd4f6ef..a91c1a3f0e32 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-enum-dv-timings.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-enum-dv-timings.rst
@@ -67,7 +67,7 @@ return an ``EINVAL`` error code.
.. c:type:: v4l2_enum_dv_timings
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
.. flat-table:: struct v4l2_enum_dv_timings
:header-rows: 0
diff --git a/Documentation/userspace-api/media/v4l/vidioc-enum-fmt.rst b/Documentation/userspace-api/media/v4l/vidioc-enum-fmt.rst
index 2b3fa9c23146..000c154b0f98 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-enum-fmt.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-enum-fmt.rst
@@ -71,10 +71,12 @@ the ``mbus_code`` field is handled differently:
formats shall not depend on the active configuration of the video device
or device pipeline.
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
.. c:type:: v4l2_fmtdesc
+.. cssclass:: longtable
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
+
.. flat-table:: struct v4l2_fmtdesc
:header-rows: 0
:stub-columns: 0
@@ -135,7 +137,9 @@ the ``mbus_code`` field is handled differently:
zero.
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{8.4cm}|p{1.8cm}|p{7.1cm}|
+
+.. cssclass:: longtable
.. _fmtdesc-flags:
diff --git a/Documentation/userspace-api/media/v4l/vidioc-enum-frameintervals.rst b/Documentation/userspace-api/media/v4l/vidioc-enum-frameintervals.rst
index 1f0949726045..34cd39feaeaa 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-enum-frameintervals.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-enum-frameintervals.rst
@@ -99,8 +99,6 @@ application should zero out all members except for the *IN* fields.
.. c:type:: v4l2_frmival_stepwise
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
.. flat-table:: struct v4l2_frmival_stepwise
:header-rows: 0
:stub-columns: 0
@@ -119,7 +117,7 @@ application should zero out all members except for the *IN* fields.
.. c:type:: v4l2_frmivalenum
-.. tabularcolumns:: |p{1.8cm}|p{4.4cm}|p{2.4cm}|p{8.9cm}|
+.. tabularcolumns:: |p{4.9cm}|p{3.3cm}|p{9.1cm}|
.. flat-table:: struct v4l2_frmivalenum
:header-rows: 0
@@ -154,7 +152,6 @@ application should zero out all members except for the *IN* fields.
-
* - __u32
- ``reserved[2]``
- -
- Reserved space for future use. Must be zeroed by drivers and
applications.
@@ -164,7 +161,7 @@ Enums
.. c:type:: v4l2_frmivaltypes
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
.. flat-table:: enum v4l2_frmivaltypes
:header-rows: 0
diff --git a/Documentation/userspace-api/media/v4l/vidioc-enum-framesizes.rst b/Documentation/userspace-api/media/v4l/vidioc-enum-framesizes.rst
index c9a36bcf699f..7271fe37ce3f 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-enum-framesizes.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-enum-framesizes.rst
@@ -89,8 +89,6 @@ application should zero out all members except for the *IN* fields.
.. c:type:: v4l2_frmsize_discrete
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
.. flat-table:: struct v4l2_frmsize_discrete
:header-rows: 0
:stub-columns: 0
@@ -106,8 +104,6 @@ application should zero out all members except for the *IN* fields.
.. c:type:: v4l2_frmsize_stepwise
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
.. flat-table:: struct v4l2_frmsize_stepwise
:header-rows: 0
:stub-columns: 0
@@ -135,7 +131,7 @@ application should zero out all members except for the *IN* fields.
.. c:type:: v4l2_frmsizeenum
-.. tabularcolumns:: |p{1.4cm}|p{5.9cm}|p{2.3cm}|p{8.0cm}|
+.. tabularcolumns:: |p{6.4cm}|p{2.8cm}|p{8.1cm}|
.. flat-table:: struct v4l2_frmsizeenum
:header-rows: 0
@@ -173,7 +169,7 @@ Enums
.. c:type:: v4l2_frmsizetypes
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
.. flat-table:: enum v4l2_frmsizetypes
:header-rows: 0
diff --git a/Documentation/userspace-api/media/v4l/vidioc-enum-freq-bands.rst b/Documentation/userspace-api/media/v4l/vidioc-enum-freq-bands.rst
index a0764fca8d18..e385929bed62 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-enum-freq-bands.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-enum-freq-bands.rst
@@ -40,7 +40,7 @@ fields, and zero out the ``reserved`` array of a struct
This ioctl is supported if the ``V4L2_TUNER_CAP_FREQ_BANDS`` capability
of the corresponding tuner/modulator is set.
-.. tabularcolumns:: |p{2.9cm}|p{2.9cm}|p{5.8cm}|p{2.9cm}|p{3.0cm}|
+.. tabularcolumns:: |p{2.9cm}|p{2.9cm}|p{5.8cm}|p{2.9cm}|p{2.4cm}|
.. c:type:: v4l2_frequency_band
@@ -108,7 +108,7 @@ of the corresponding tuner/modulator is set.
Applications and drivers must set the array to zero.
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
.. _band-modulation:
diff --git a/Documentation/userspace-api/media/v4l/vidioc-enuminput.rst b/Documentation/userspace-api/media/v4l/vidioc-enuminput.rst
index 0f62e681a827..d5f0535bd866 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-enuminput.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-enuminput.rst
@@ -38,7 +38,7 @@ fill the rest of the structure or return an ``EINVAL`` error code when the
index is out of bounds. To enumerate all inputs applications shall begin
at index zero, incrementing by one until the driver returns ``EINVAL``.
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{3.0cm}|p{3.5cm}|p{10.8cm}|
.. c:type:: v4l2_input
@@ -101,7 +101,7 @@ at index zero, incrementing by one until the driver returns ``EINVAL``.
zero.
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{1.0cm}|p{9.7cm}|
.. _input-type:
@@ -123,7 +123,7 @@ at index zero, incrementing by one until the driver returns ``EINVAL``.
- This input is a touch device for capturing raw touch data.
-.. tabularcolumns:: |p{4.8cm}|p{2.6cm}|p{10.1cm}|
+.. tabularcolumns:: |p{5.6cm}|p{2.6cm}|p{9.1cm}|
.. _input-status:
@@ -194,7 +194,7 @@ at index zero, incrementing by one until the driver returns ``EINVAL``.
- VTR time constant. [?]
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.4cm}|p{8.3cm}|
.. _input-capabilities:
diff --git a/Documentation/userspace-api/media/v4l/vidioc-enumoutput.rst b/Documentation/userspace-api/media/v4l/vidioc-enumoutput.rst
index 91fcf99094d2..06ee8386ae86 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-enumoutput.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-enumoutput.rst
@@ -39,7 +39,7 @@ when the index is out of bounds. To enumerate all outputs applications
shall begin at index zero, incrementing by one until the driver returns
``EINVAL``.
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
.. c:type:: v4l2_output
@@ -96,7 +96,7 @@ shall begin at index zero, incrementing by one until the driver returns
zero.
-.. tabularcolumns:: |p{7.0cm}|p{1.8cm}|p{8.7cm}|
+.. tabularcolumns:: |p{7.5cm}|p{0.6cm}|p{9.2cm}|
.. _output-type:
@@ -118,7 +118,7 @@ shall begin at index zero, incrementing by one until the driver returns
- The video output will be copied to a :ref:`video overlay <overlay>`.
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.4cm}|p{2.4cm}|p{8.5cm}|
.. _output-capabilities:
diff --git a/Documentation/userspace-api/media/v4l/vidioc-enumstd.rst b/Documentation/userspace-api/media/v4l/vidioc-enumstd.rst
index b5704e8cf909..6af71b74d42e 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-enumstd.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-enumstd.rst
@@ -47,7 +47,7 @@ or output. [#f1]_
.. c:type:: v4l2_standard
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
.. flat-table:: struct v4l2_standard
:header-rows: 0
@@ -86,7 +86,7 @@ or output. [#f1]_
.. c:type:: v4l2_fract
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
.. flat-table:: struct v4l2_fract
:header-rows: 0
@@ -100,7 +100,7 @@ or output. [#f1]_
- ``denominator``
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
.. _v4l2-std-id:
diff --git a/Documentation/userspace-api/media/v4l/vidioc-expbuf.rst b/Documentation/userspace-api/media/v4l/vidioc-expbuf.rst
index 212377c90442..982e8bcd9c47 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-expbuf.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-expbuf.rst
@@ -112,7 +112,7 @@ Examples
.. c:type:: v4l2_exportbuffer
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
.. flat-table:: struct v4l2_exportbuffer
:header-rows: 0
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-audio.rst b/Documentation/userspace-api/media/v4l/vidioc-g-audio.rst
index 4c93bd55bd97..bf61db04d12e 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-g-audio.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-audio.rst
@@ -49,7 +49,7 @@ ioctl. Drivers may switch to a different audio mode if the request
cannot be satisfied. However, this is a write-only ioctl, it does not
return the actual new audio mode.
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
.. c:type:: v4l2_audio
@@ -79,7 +79,7 @@ return the actual new audio mode.
the array to zero.
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
.. _audio-capability:
@@ -99,7 +99,7 @@ return the actual new audio mode.
- Automatic Volume Level mode is supported.
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
.. _audio-mode:
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-audioout.rst b/Documentation/userspace-api/media/v4l/vidioc-g-audioout.rst
index 194f22493517..9ab15add2911 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-g-audioout.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-audioout.rst
@@ -58,7 +58,7 @@ as ``VIDIOC_G_AUDOUT`` does.
.. c:type:: v4l2_audioout
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
.. flat-table:: struct v4l2_audioout
:header-rows: 0
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-crop.rst b/Documentation/userspace-api/media/v4l/vidioc-g-crop.rst
index 0ac1509e41cc..570d98308dc4 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-g-crop.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-crop.rst
@@ -71,7 +71,7 @@ When cropping is not supported then no parameters are changed and
.. c:type:: v4l2_crop
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
.. flat-table:: struct v4l2_crop
:header-rows: 0
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-ctrl.rst b/Documentation/userspace-api/media/v4l/vidioc-g-ctrl.rst
index 4f1bed53fad5..80e8c63d530f 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-g-ctrl.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-ctrl.rst
@@ -57,7 +57,7 @@ These ioctls work only with user controls. For other control classes the
.. c:type:: v4l2_control
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
.. flat-table:: struct v4l2_control
:header-rows: 0
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-dv-timings.rst b/Documentation/userspace-api/media/v4l/vidioc-g-dv-timings.rst
index 760a33d43b7d..dfc45427ea23 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-g-dv-timings.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-dv-timings.rst
@@ -82,10 +82,12 @@ EBUSY
EPERM
``VIDIOC_SUBDEV_S_DV_TIMINGS`` has been called on a read-only subdevice.
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
-
.. c:type:: v4l2_bt_timings
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
+
+.. cssclass:: longtable
+
.. flat-table:: struct v4l2_bt_timings
:header-rows: 0
:stub-columns: 0
@@ -171,7 +173,7 @@ EPERM
- Reserved for future extensions. Drivers and applications must set
the array to zero.
-.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{7.0cm}|p{3.5cm}|
+.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{7.0cm}|p{3.1cm}|
.. c:type:: v4l2_dv_timings
@@ -194,7 +196,7 @@ EPERM
* - }
-
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
.. _dv-timing-types:
@@ -213,7 +215,9 @@ EPERM
- 0
- BT.656/1120 timings
-.. tabularcolumns:: |p{4.5cm}|p{12.8cm}|
+.. tabularcolumns:: |p{6.5cm}|p{11.0cm}|
+
+.. cssclass:: longtable
.. _dv-bt-standards:
@@ -236,9 +240,11 @@ EPERM
There are no horizontal syncs/porches at all in this format.
Total blanking timings must be set in hsync or vsync fields only.
-.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
+_dv-bt-flags:
-.. _dv-bt-flags:
+.. tabularcolumns:: |p{7.7cm}|p{9.8cm}|
+
+.. cssclass:: longtable
.. flat-table:: DV BT Timing flags
:header-rows: 0
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-edid.rst b/Documentation/userspace-api/media/v4l/vidioc-g-edid.rst
index 39d523a449a7..fc5535c50d61 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-g-edid.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-edid.rst
@@ -100,7 +100,7 @@ EDID is no longer available.
.. c:type:: v4l2_edid
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
.. flat-table:: struct v4l2_edid
:header-rows: 0
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-enc-index.rst b/Documentation/userspace-api/media/v4l/vidioc-g-enc-index.rst
index 7698e65ccccf..c6792bbe3d04 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-g-enc-index.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-enc-index.rst
@@ -54,7 +54,7 @@ will be zero.
Currently this ioctl is only defined for MPEG-2 program streams and
video elementary streams.
-.. tabularcolumns:: |p{3.8cm}|p{5.6cm}|p{8.1cm}|
+.. tabularcolumns:: |p{4.2cm}|p{6.2cm}|p{6.9cm}|
.. c:type:: v4l2_enc_idx
@@ -81,7 +81,7 @@ video elementary streams.
their ``offset``.
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
.. c:type:: v4l2_enc_idx_entry
@@ -113,7 +113,7 @@ video elementary streams.
- Reserved for future extensions. Drivers must set the array to
zero.
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
.. _enc-idx-flags:
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst b/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
index b9c62affbb5a..a90c433e430c 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
@@ -118,11 +118,15 @@ correct. This prevents the situation where only some of the controls
were set/get. Only low-level errors (e. g. a failed i2c command) can
still cause this situation.
-.. tabularcolumns:: |p{1.2cm}|p{3.0cm}|p{1.5cm}|p{11.8cm}|
+.. tabularcolumns:: |p{6.8cm}|p{4.0cm}|p{6.5cm}|
.. c:type:: v4l2_ext_control
-.. cssclass: longtable
+.. raw:: latex
+
+ \footnotesize
+
+.. cssclass:: longtable
.. flat-table:: struct v4l2_ext_control
:header-rows: 0
@@ -221,7 +225,11 @@ still cause this situation.
* - }
-
-.. tabularcolumns:: |p{4.0cm}|p{2.2cm}|p{2.1cm}|p{8.2cm}|
+.. raw:: latex
+
+ \normalsize
+
+.. tabularcolumns:: |p{4.0cm}|p{2.5cm}|p{10.8cm}|
.. c:type:: v4l2_ext_controls
@@ -334,10 +342,12 @@ still cause this situation.
Ignored if ``count`` equals zero.
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
.. _ctrl-class:
+.. tabularcolumns:: |p{7.3cm}|p{2.0cm}|p{8.0cm}|
+
+.. cssclass:: longtable
+
.. flat-table:: Control classes
:header-rows: 0
:stub-columns: 0
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-fbuf.rst b/Documentation/userspace-api/media/v4l/vidioc-g-fbuf.rst
index dc1f16343b22..b6cc1a823207 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-g-fbuf.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-fbuf.rst
@@ -75,7 +75,7 @@ jeopardize the system security, its stability or even damage the
hardware, therefore only the superuser can set the parameters for a
destructive video overlay.
-.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{3.5cm}|p{7.0cm}|
+.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{3.5cm}|p{6.6cm}|
.. c:type:: v4l2_framebuffer
@@ -207,7 +207,7 @@ destructive video overlay.
- ``priv``
- Reserved. Drivers and applications must set this field to zero.
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{7.4cm}|p{1.6cm}|p{8.3cm}|
.. _framebuffer-cap:
@@ -255,7 +255,7 @@ destructive video overlay.
chroma-key colors are replaced by framebuffer pixels, which is
exactly opposite of ``V4L2_FBUF_CAP_CHROMAKEY``
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{7.4cm}|p{1.6cm}|p{8.3cm}|
.. _framebuffer-flags:
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-fmt.rst b/Documentation/userspace-api/media/v4l/vidioc-g-fmt.rst
index 7e9f8475ea63..675c385e5aca 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-g-fmt.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-fmt.rst
@@ -89,7 +89,7 @@ The format as returned by :ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` must be identical
.. c:type:: v4l2_format
-.. tabularcolumns:: |p{1.2cm}|p{4.6cm}|p{3.0cm}|p{8.6cm}|
+.. tabularcolumns:: |p{7.4cm}|p{4.4cm}|p{5.5cm}|
.. flat-table:: struct v4l2_format
:header-rows: 0
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-frequency.rst b/Documentation/userspace-api/media/v4l/vidioc-g-frequency.rst
index 5445a4a442e4..0d037665a89e 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-g-frequency.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-frequency.rst
@@ -51,7 +51,7 @@ structure. When the requested frequency is not possible the driver
assumes the closest possible value. However :ref:`VIDIOC_S_FREQUENCY <VIDIOC_G_FREQUENCY>` is a
write-only ioctl, it does not return the actual new frequency.
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
.. c:type:: v4l2_frequency
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-jpegcomp.rst b/Documentation/userspace-api/media/v4l/vidioc-g-jpegcomp.rst
index 93ed111dfcb9..d4565d2cc1f5 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-g-jpegcomp.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-jpegcomp.rst
@@ -54,7 +54,7 @@ stored in the JPEG-encoded fields. These define how the JPEG field is
encoded. If you omit them, applications assume you've used standard
encoding. You usually do want to add them.
-.. tabularcolumns:: |p{1.2cm}|p{3.0cm}|p{13.3cm}|
+.. tabularcolumns:: |p{1.2cm}|p{3.0cm}|p{13.1cm}|
.. c:type:: v4l2_jpegcompression
@@ -91,7 +91,7 @@ encoding. You usually do want to add them.
control is exposed by a driver applications should use it instead
and ignore this field.
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
.. _jpeg-markers:
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-modulator.rst b/Documentation/userspace-api/media/v4l/vidioc-g-modulator.rst
index 2ac2473e341b..e73d24f12054 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-g-modulator.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-modulator.rst
@@ -60,7 +60,7 @@ context.
To change the radio frequency the
:ref:`VIDIOC_S_FREQUENCY <VIDIOC_G_FREQUENCY>` ioctl is available.
-.. tabularcolumns:: |p{2.9cm}|p{2.9cm}|p{5.8cm}|p{2.9cm}|p{3.0cm}|
+.. tabularcolumns:: |p{2.9cm}|p{2.9cm}|p{5.8cm}|p{2.9cm}|p{2.4cm}|
.. c:type:: v4l2_modulator
@@ -119,11 +119,12 @@ To change the radio frequency the
Drivers and applications must set the array to zero.
-
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
.. _modulator-txsubchans:
+.. tabularcolumns:: |p{6.0cm}|p{2.0cm}|p{9.3cm}|
+
+.. cssclass:: longtable
+
.. flat-table:: Modulator Audio Transmission Flags
:header-rows: 0
:stub-columns: 0
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-parm.rst b/Documentation/userspace-api/media/v4l/vidioc-g-parm.rst
index 724f7fa7bae1..8b5600fbf013 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-g-parm.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-parm.rst
@@ -56,7 +56,7 @@ To get and set the streaming parameters applications call the
pointer to a struct :c:type:`v4l2_streamparm` which contains a
union holding separate parameters for input and output devices.
-.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{3.5cm}|p{7.0cm}|
+.. tabularcolumns:: |p{3.7cm}|p{3.5cm}|p{10.1cm}|
.. c:type:: v4l2_streamparm
@@ -85,10 +85,9 @@ union holding separate parameters for input and output devices.
- ``raw_data``\ [200]
- A place holder for future extensions.
* - }
- -
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
.. c:type:: v4l2_captureparm
@@ -147,7 +146,7 @@ union holding separate parameters for input and output devices.
the array to zero.
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
.. c:type:: v4l2_outputparm
@@ -207,7 +206,7 @@ union holding separate parameters for input and output devices.
the array to zero.
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
.. _parm-caps:
@@ -222,7 +221,7 @@ union holding separate parameters for input and output devices.
field.
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
.. _parm-flags:
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-priority.rst b/Documentation/userspace-api/media/v4l/vidioc-g-priority.rst
index d72a0c716fca..3031256159c3 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-g-priority.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-priority.rst
@@ -45,7 +45,7 @@ with a pointer to this variable.
.. c:type:: v4l2_priority
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
.. flat-table:: enum v4l2_priority
:header-rows: 0
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-selection.rst b/Documentation/userspace-api/media/v4l/vidioc-g-selection.rst
index 9a9e589cce77..2b5b27260741 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-g-selection.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-selection.rst
@@ -129,7 +129,7 @@ Selection targets and flags are documented in
.. c:type:: v4l2_selection
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
.. flat-table:: struct v4l2_selection
:header-rows: 0
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-sliced-vbi-cap.rst b/Documentation/userspace-api/media/v4l/vidioc-g-sliced-vbi-cap.rst
index b3f4dc71bb5d..839366919e15 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-g-sliced-vbi-cap.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-sliced-vbi-cap.rst
@@ -45,7 +45,7 @@ the sliced VBI API is unsupported or ``type`` is invalid.
.. c:type:: v4l2_sliced_vbi_cap
-.. tabularcolumns:: |p{1.2cm}|p{4.2cm}|p{4.1cm}|p{4.0cm}|p{4.0cm}|
+.. tabularcolumns:: |p{1.4cm}|p{4.4cm}|p{4.5cm}|p{3.6cm}|p{3.6cm}|
.. flat-table:: struct v4l2_sliced_vbi_cap
:header-rows: 0
@@ -122,7 +122,7 @@ the sliced VBI API is unsupported or ``type`` is invalid.
\scriptsize
-.. tabularcolumns:: |p{3.5cm}|p{1.0cm}|p{2.0cm}|p{2.0cm}|p{8.0cm}|
+.. tabularcolumns:: |p{3.5cm}|p{1.0cm}|p{2.0cm}|p{2.0cm}|p{8.4cm}|
.. _vbi-services:
@@ -170,6 +170,7 @@ the sliced VBI API is unsupported or ``type`` is invalid.
- 0x4401
- :cspan:`2` Set of services applicable to 625 line systems.
+
.. raw:: latex
\normalsize
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-tuner.rst b/Documentation/userspace-api/media/v4l/vidioc-g-tuner.rst
index 116e66c01556..d392e37f080d 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-g-tuner.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-tuner.rst
@@ -59,7 +59,7 @@ to zero. The term 'tuner' means SDR receiver in this context.
To change the radio frequency the
:ref:`VIDIOC_S_FREQUENCY <VIDIOC_G_FREQUENCY>` ioctl is available.
- .. tabularcolumns:: |p{1.3cm}|p{3.0cm}|p{6.6cm}|p{6.6cm}|
+ .. tabularcolumns:: |p{1.3cm}|p{3.0cm}|p{7.0cm}|p{5.8cm}|
.. c:type:: v4l2_tuner
@@ -182,7 +182,7 @@ To change the radio frequency the
Drivers and applications must set the array to zero.
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
.. c:type:: v4l2_tuner_type
@@ -205,7 +205,7 @@ To change the radio frequency the
- 5
- Tuner controls the RF part of a Software Digital Radio (SDR)
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{7.0cm}|p{2.2cm}|p{8.1cm}|
.. _tuner-capability:
@@ -296,10 +296,10 @@ To change the radio frequency the
instead of 62.5 kHz.
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
-
.. _tuner-rxsubchans:
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
+
.. flat-table:: Tuner Audio Reception Flags
:header-rows: 0
:stub-columns: 0
@@ -334,7 +334,7 @@ To change the radio frequency the
- The tuner receives an RDS channel.
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
.. _tuner-audmode:
diff --git a/Documentation/userspace-api/media/v4l/vidioc-querycap.rst b/Documentation/userspace-api/media/v4l/vidioc-querycap.rst
index b512b1fbf9a3..63e23f6f95ee 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-querycap.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-querycap.rst
@@ -38,10 +38,12 @@ pointer to a struct :c:type:`v4l2_capability` which is
filled by the driver. When the driver is not compatible with this
specification the ioctl returns an ``EINVAL`` error code.
-.. tabularcolumns:: |p{1.5cm}|p{2.5cm}|p{13cm}|
-
.. c:type:: v4l2_capability
+.. tabularcolumns:: |p{1.4cm}|p{2.8cm}|p{13.1cm}|
+
+.. cssclass:: longtable
+
.. flat-table:: struct v4l2_capability
:header-rows: 0
:stub-columns: 0
@@ -130,7 +132,7 @@ specification the ioctl returns an ``EINVAL`` error code.
zero.
-.. tabularcolumns:: |p{6.1cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{7.0cm}|p{2.6cm}|p{7.7cm}|
.. _device-capabilities:
diff --git a/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst b/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst
index 82f61f1e2fb8..583fa551f0a1 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst
@@ -94,7 +94,7 @@ inclusive.
See also the examples in :ref:`control`.
-.. tabularcolumns:: |p{1.2cm}|p{3.6cm}|p{12.7cm}|
+.. tabularcolumns:: |p{1.2cm}|p{3.6cm}|p{12.5cm}|
.. _v4l2-queryctrl:
@@ -172,7 +172,7 @@ See also the examples in :ref:`control`.
zero.
-.. tabularcolumns:: |p{1.2cm}|p{5.0cm}|p{11.3cm}|
+.. tabularcolumns:: |p{1.2cm}|p{5.5cm}|p{10.6cm}|
.. _v4l2-query-ext-ctrl:
@@ -272,7 +272,7 @@ See also the examples in :ref:`control`.
the array to zero.
-.. tabularcolumns:: |p{1.2cm}|p{1.0cm}|p{1.7cm}|p{13.0cm}|
+.. tabularcolumns:: |p{1.2cm}|p{3.0cm}|p{13.1cm}|
.. _v4l2-querymenu:
@@ -306,11 +306,14 @@ See also the examples in :ref:`control`.
- Reserved for future extensions. Drivers must set the array to
zero.
-
-.. tabularcolumns:: |p{5.8cm}|p{1.4cm}|p{1.0cm}|p{1.4cm}|p{6.9cm}|
-
.. c:type:: v4l2_ctrl_type
+.. raw:: latex
+
+ \footnotesize
+
+.. tabularcolumns:: |p{6.5cm}|p{1.5cm}|p{1.1cm}|p{1.5cm}|p{6.8cm}|
+
.. cssclass:: longtable
.. flat-table:: enum v4l2_ctrl_type
@@ -487,10 +490,14 @@ See also the examples in :ref:`control`.
- A struct :c:type:`v4l2_ctrl_hevc_slice_params`, containing HEVC
slice parameters for stateless video decoders.
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. raw:: latex
+
+ \normalsize
.. _control-flags:
+.. tabularcolumns:: |p{7.3cm}|p{1.8cm}|p{8.2cm}|
+
.. cssclass:: longtable
.. flat-table:: Control Flags
diff --git a/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst b/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst
index c1c88e00b106..50ea72043bb0 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst
@@ -71,7 +71,7 @@ aborting or finishing any DMA in progress, an implicit
.. c:type:: v4l2_requestbuffers
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
.. flat-table:: struct v4l2_requestbuffers
:header-rows: 0
@@ -109,8 +109,6 @@ aborting or finishing any DMA in progress, an implicit
- A place holder for future extensions. Drivers and applications
must set the array to zero.
-.. tabularcolumns:: |p{6.1cm}|p{2.2cm}|p{8.7cm}|
-
.. _v4l2-buf-capabilities:
.. _V4L2-BUF-CAP-SUPPORTS-MMAP:
.. _V4L2-BUF-CAP-SUPPORTS-USERPTR:
@@ -120,6 +118,12 @@ aborting or finishing any DMA in progress, an implicit
.. _V4L2-BUF-CAP-SUPPORTS-M2M-HOLD-CAPTURE-BUF:
.. _V4L2-BUF-CAP-SUPPORTS-MMAP-CACHE-HINTS:
+.. raw:: latex
+
+ \footnotesize
+
+.. tabularcolumns:: |p{8.1cm}|p{2.2cm}|p{7.0cm}|
+
.. cssclass:: longtable
.. flat-table:: V4L2 Buffer Capabilities Flags
@@ -157,6 +161,10 @@ aborting or finishing any DMA in progress, an implicit
:ref:`V4L2_BUF_FLAG_NO_CACHE_INVALIDATE <V4L2-BUF-FLAG-NO-CACHE-INVALIDATE>` and
:ref:`V4L2_BUF_FLAG_NO_CACHE_CLEAN <V4L2-BUF-FLAG-NO-CACHE-CLEAN>`.
+.. raw:: latex
+
+ \normalsize
+
Return Value
============
diff --git a/Documentation/userspace-api/media/v4l/vidioc-s-hw-freq-seek.rst b/Documentation/userspace-api/media/v4l/vidioc-s-hw-freq-seek.rst
index 1948f31c2dbc..ed10f380579a 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-s-hw-freq-seek.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-s-hw-freq-seek.rst
@@ -58,7 +58,7 @@ set.
If this ioctl is called from a non-blocking filehandle, then ``EAGAIN``
error code is returned and no seek takes place.
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
.. c:type:: v4l2_hw_freq_seek
diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-interval.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-interval.rst
index 17acf3fd8396..3703943b412f 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-interval.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-interval.rst
@@ -61,7 +61,7 @@ multiple pads of the same sub-device is not defined.
.. c:type:: v4l2_subdev_frame_interval_enum
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
.. flat-table:: struct v4l2_subdev_frame_interval_enum
:header-rows: 0
diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-size.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-size.rst
index 8016fba7023f..c25a9896df0e 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-size.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-size.rst
@@ -63,7 +63,7 @@ information about try formats.
.. c:type:: v4l2_subdev_frame_size_enum
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
.. flat-table:: struct v4l2_subdev_frame_size_enum
:header-rows: 0
diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-mbus-code.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-mbus-code.rst
index 1fd950e34a0b..4c8d5a15fd29 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-mbus-code.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-mbus-code.rst
@@ -48,7 +48,7 @@ information about the try formats.
.. c:type:: v4l2_subdev_mbus_code_enum
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
.. flat-table:: struct v4l2_subdev_mbus_code_enum
:header-rows: 0
@@ -79,10 +79,14 @@ information about the try formats.
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{7.7cm}|
-
.. _v4l2-subdev-mbus-code-flags:
+.. raw:: latex
+
+ \footnotesize
+
+.. tabularcolumns:: |p{8.8cm}|p{2.2cm}|p{6.3cm}|
+
.. flat-table:: Subdev Media Bus Code Enumerate Flags
:header-rows: 0
:stub-columns: 0
@@ -124,6 +128,10 @@ information about the try formats.
ioctl with :ref:`V4L2_MBUS_FRAMEFMT_SET_CSC <mbus-framefmt-set-csc>` set.
See :ref:`v4l2-mbus-format` on how to do this.
+.. raw:: latex
+
+ \normalsize
+
Return Value
============
diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-crop.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-crop.rst
index 2d78b4f5928d..bd15c0a5a66b 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-crop.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-crop.rst
@@ -78,7 +78,7 @@ modified format should be as close as possible to the original request.
.. c:type:: v4l2_subdev_crop
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
.. flat-table:: struct v4l2_subdev_crop
:header-rows: 0
diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-fmt.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-fmt.rst
index 90b9bbfb61dd..7acdbb939d89 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-fmt.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-fmt.rst
@@ -81,7 +81,7 @@ doesn't match the device capabilities. They must instead modify the
format to match what the hardware can provide. The modified format
should be as close as possible to the original request.
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
.. c:type:: v4l2_subdev_format
@@ -107,7 +107,7 @@ should be as close as possible to the original request.
the array to zero.
-.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
.. _v4l2-subdev-format-whence:
diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-frame-interval.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-frame-interval.rst
index 3a50f8b2843d..d7fe7543c506 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-frame-interval.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-frame-interval.rst
@@ -76,7 +76,7 @@ the same sub-device is not defined.
.. c:type:: v4l2_subdev_frame_interval
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
.. flat-table:: struct v4l2_subdev_frame_interval
:header-rows: 0
diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-selection.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-selection.rst
index f35b9562df21..f9172a42f036 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-selection.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-selection.rst
@@ -70,7 +70,7 @@ Selection targets and flags are documented in
.. c:type:: v4l2_subdev_selection
-.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
.. flat-table:: struct v4l2_subdev_selection
:header-rows: 0
diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-querycap.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-querycap.rst
index 949d9775b03d..9b8d8644ec0f 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-subdev-querycap.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-querycap.rst
@@ -38,7 +38,7 @@ a struct :c:type:`v4l2_subdev_capability` which is filled by the driver. When
the driver is not compatible with this specification the ioctl returns
``ENOTTY`` error code.
-.. tabularcolumns:: |p{1.5cm}|p{2.5cm}|p{13cm}|
+.. tabularcolumns:: |p{1.5cm}|p{2.9cm}|p{12.9cm}|
.. c:type:: v4l2_subdev_capability
@@ -75,7 +75,7 @@ the driver is not compatible with this specification the ioctl returns
- ``reserved``\ [14]
- Reserved for future extensions. Set to 0 by the V4L2 core.
-.. tabularcolumns:: |p{6cm}|p{2.2cm}|p{8.8cm}|
+.. tabularcolumns:: |p{6.8cm}|p{2.4cm}|p{8.1cm}|
.. _subdevice-capabilities:
diff --git a/Documentation/userspace-api/media/v4l/vidioc-subscribe-event.rst b/Documentation/userspace-api/media/v4l/vidioc-subscribe-event.rst
index d1ad35164033..a6fc3c5fe99d 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-subscribe-event.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-subscribe-event.rst
@@ -39,7 +39,7 @@ Description
Subscribe or unsubscribe V4L2 event. Subscribed events are dequeued by
using the :ref:`VIDIOC_DQEVENT` ioctl.
-.. tabularcolumns:: |p{4.6cm}|p{4.4cm}|p{8.7cm}|
+.. tabularcolumns:: |p{2.6cm}|p{4.4cm}|p{10.3cm}|
.. c:type:: v4l2_event_subscription
@@ -71,7 +71,7 @@ using the :ref:`VIDIOC_DQEVENT` ioctl.
the array to zero.
-.. tabularcolumns:: |p{6.8cm}|p{2.2cm}|p{8.5cm}|
+.. tabularcolumns:: |p{7.5cm}|p{2.0cm}|p{7.8cm}|
.. _event-flags:
--
2.29.2
prev parent reply other threads:[~2020-12-10 10:58 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-10 10:55 [PATCH 00/13] Address issues with PDF output at media uAPI docs Mauro Carvalho Chehab
2020-12-10 10:55 ` [PATCH 01/13] docs: conf.py: fix sphinx version detection for margin set Mauro Carvalho Chehab
2020-12-10 14:48 ` Jonathan Corbet
2020-12-10 16:01 ` [PATCH RFC] docs: experimental: build PDF with rst2pdf Mauro Carvalho Chehab
2020-12-10 16:29 ` Mauro Carvalho Chehab
2020-12-11 8:33 ` [PATCH RFC v2] " Mauro Carvalho Chehab
2020-12-11 20:48 ` Jonathan Corbet
2020-12-11 23:54 ` Mauro Carvalho Chehab
2020-12-12 0:03 ` Jonathan Corbet
2020-12-10 16:03 ` [PATCH 01/13] docs: conf.py: fix sphinx version detection for margin set Mauro Carvalho Chehab
2020-12-10 10:55 ` [PATCH 02/13] media: colorspaces-details.rst: drop tabularcolumns Mauro Carvalho Chehab
2020-12-10 10:55 ` [PATCH 03/13] media: control.rst: use a table for V4L2_CID_POWER_LINE Mauro Carvalho Chehab
2020-12-10 10:55 ` [PATCH 04/13] media: docs: sliced-vbi: fix V4L2_SLICED_WSS_625 docs Mauro Carvalho Chehab
2020-12-10 10:55 ` [PATCH 05/13] media: ext-ctrls-codec-stateless.rst: change a FWHT flag description Mauro Carvalho Chehab
2020-12-10 10:55 ` [PATCH 06/13] media: ext-ctrls-codec.rst: add a missing profile description Mauro Carvalho Chehab
2020-12-10 10:55 ` [PATCH 07/13] media: ext-ctrls-codec.rst: simplify a few tables Mauro Carvalho Chehab
2020-12-10 10:55 ` [PATCH 08/13] media: ext-ctrls-jpeg.rst: cleanup V4L2_CID_JPEG_COMPRESSION_QUALITY text Mauro Carvalho Chehab
2020-12-10 10:55 ` [PATCH 09/13] media: docs: pixfmt: use section titles for bayer formats Mauro Carvalho Chehab
2020-12-10 10:55 ` [PATCH 10/13] media: buffer.rst: fix a PDF output issue Mauro Carvalho Chehab
2020-12-10 10:55 ` [PATCH 11/13] media: ext-ctrls-codec-stateless.rst: fix an H-264 table format Mauro Carvalho Chehab
2020-12-10 10:55 ` [PATCH 12/13] media: pixfmt-yuv-planar.rst: fix PDF OUTPUT Mauro Carvalho Chehab
2020-12-10 10:55 ` Mauro Carvalho Chehab [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1f2ed769f40232320ced988f7bee010d6d2db9bf.1607597287.git.mchehab+huawei@kernel.org \
--to=mchehab+huawei@kernel.org \
--cc=bingbu.cao@intel.com \
--cc=hverkuil-cisco@xs4all.nl \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=mauro.chehab@huawei.com \
--cc=mchehab@kernel.org \
--cc=sakari.ailus@linux.intel.com \
--cc=sean@mess.org \
--cc=tian.shu.qiu@intel.com \
--cc=yong.zhi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.