From: Matt Fleming <matt@console-pimps.org>
To: Adrian Hunter <adrian.hunter@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>,
"Lavinen Jarkko (Nokia-D/Helsinki)" <jarkko.lavinen@nokia.com>,
"Karpov Denis.2 (EXT-Teleca/Helsinki)"
<ext-denis.2.karpov@nokia.com>,
linux-omap Mailing List <linux-omap@vger.kernel.org>,
lkml <linux-kernel@vger.kernel.org>,
Andrew Morton <akpm@linux-foundation.org>
Subject: Re: [PATCH 7/32] mmc: add host capabilities for SD only and MMC only
Date: Sun, 26 Jul 2009 00:51:50 +0100 [thread overview]
Message-ID: <20090725235150.GD12665@console-pimps.org> (raw)
In-Reply-To: <4A6B60C3.3070609@nokia.com>
On Sat, Jul 25, 2009 at 10:45:07PM +0300, Adrian Hunter wrote:
>
> I have no objections if you write such a patch :-)
See also my change to [PATCH 32/32] of this series.
I don't have hardware to test all of the affected drivers but I was
thinking of something along the lines of,
---
mmc: add host capabilities for SD only and MMC only
Some hosts can accept only certain types of cards. For example, an eMMC
is MMC only and a uSD slot may be SD only. However the MMC card scanning
logic checks for all card types one by one.
Add host capabilities to specify which card types can be used, and amend
the card scanning logic to skip scanning for those types which cannot be
used.
Signed-off-by: Matt Fleming <matt@console-pimps.org>
Cc: Adrian Hunter <adrian.hunter@nokia.com>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Andrew Morton <akpm@linux-foundation.org>
---
drivers/mmc/core/core.c | 16 +++++++++++++++-
drivers/mmc/host/at91_mci.c | 2 +-
drivers/mmc/host/atmel-mci.c | 1 +
drivers/mmc/host/au1xmmc.c | 3 ++-
drivers/mmc/host/cb710-mmc.c | 3 ++-
drivers/mmc/host/imxmmc.c | 3 ++-
drivers/mmc/host/mmc_spi.c | 2 +-
drivers/mmc/host/mmci.c | 2 ++
drivers/mmc/host/mvsdio.c | 3 ++-
drivers/mmc/host/mxcmmc.c | 3 ++-
drivers/mmc/host/omap.c | 2 +-
drivers/mmc/host/pxamci.c | 2 +-
drivers/mmc/host/s3cmci.c | 3 ++-
drivers/mmc/host/sdhci.c | 2 +-
drivers/mmc/host/sdricoh_cs.c | 3 ++-
drivers/mmc/host/tifm_sd.c | 3 ++-
drivers/mmc/host/tmio_mmc.c | 3 ++-
drivers/mmc/host/via-sdmmc.c | 3 ++-
drivers/mmc/host/wbsd.c | 3 ++-
include/linux/mmc/host.h | 3 +++
20 files changed, 48 insertions(+), 17 deletions(-)
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index c5a7857..7d905f9 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1066,7 +1066,11 @@ void mmc_rescan(struct work_struct *work)
mmc_power_up(host);
mmc_go_idle(host);
- mmc_send_if_cond(host, host->ocr_avail);
+ if ((host->caps & MMC_CAP_SDIO) || (host->caps & MMC_CAP_SD))
+ mmc_send_if_cond(host, host->ocr_avail);
+
+ if (!(host->caps & MMC_CAP_SDIO))
+ goto not_sdio;
/*
* First we search for SDIO...
@@ -1078,6 +1082,10 @@ void mmc_rescan(struct work_struct *work)
goto out;
}
+not_sdio:
+ if (!(host->caps & MMC_CAP_SD))
+ goto not_sd;
+
/*
* ...then normal SD...
*/
@@ -1088,6 +1096,10 @@ void mmc_rescan(struct work_struct *work)
goto out;
}
+not_sd:
+ if (!(host->caps & MMC_CAP_MMC))
+ goto not_mmc;
+
/*
* ...and finally MMC.
*/
@@ -1098,6 +1110,8 @@ void mmc_rescan(struct work_struct *work)
goto out;
}
+not_mmc:
+
mmc_release_host(host);
mmc_power_off(host);
diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c
index e556d42..aa541a5 100644
--- a/drivers/mmc/host/at91_mci.c
+++ b/drivers/mmc/host/at91_mci.c
@@ -1007,7 +1007,7 @@ static int __init at91_mci_probe(struct platform_device *pdev)
mmc->f_min = 375000;
mmc->f_max = 25000000;
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
- mmc->caps = MMC_CAP_SDIO_IRQ;
+ mmc->caps = MMC_CAP_SDIO_IRQ | MMC_CAP_SDIO | MMC_CAP_SD | MMC_CAP_MMC;
mmc->max_blk_size = 4095;
mmc->max_blk_count = mmc->max_req_size;
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 7b603e4..907841a 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -1467,6 +1467,7 @@ static int __init atmci_init_slot(struct atmel_mci *host,
mmc->f_min = DIV_ROUND_UP(host->bus_hz, 512);
mmc->f_max = host->bus_hz / 2;
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+ mmc->caps = MMC_CAP_SDIO | MMC_CAP_SD | MMC_CAP_MMC;
if (slot_data->bus_width >= 4)
mmc->caps |= MMC_CAP_4_BIT_DATA;
diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c
index d3f5561..4aae609 100644
--- a/drivers/mmc/host/au1xmmc.c
+++ b/drivers/mmc/host/au1xmmc.c
@@ -1003,7 +1003,8 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev)
mmc->max_blk_count = 512;
mmc->ocr_avail = AU1XMMC_OCR;
- mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
+ mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ |
+ MMC_CAP_SDIO | MMC_CAP_SD | MMC_CAP_MMC;
host->status = HOST_S_IDLE;
diff --git a/drivers/mmc/host/cb710-mmc.c b/drivers/mmc/host/cb710-mmc.c
index 11efefb..622b420 100644
--- a/drivers/mmc/host/cb710-mmc.c
+++ b/drivers/mmc/host/cb710-mmc.c
@@ -721,7 +721,8 @@ static int __devinit cb710_mmc_init(struct platform_device *pdev)
mmc->f_max = val;
mmc->f_min = val >> cb710_clock_divider_log2[CB710_MAX_DIVIDER_IDX];
mmc->ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34;
- mmc->caps = MMC_CAP_4_BIT_DATA;
+ mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO |
+ MMC_CAP_SD | MMC_CAP_MMC;
reader = mmc_priv(mmc);
diff --git a/drivers/mmc/host/imxmmc.c b/drivers/mmc/host/imxmmc.c
index e0be21a..b6653ba 100644
--- a/drivers/mmc/host/imxmmc.c
+++ b/drivers/mmc/host/imxmmc.c
@@ -962,7 +962,8 @@ static int __init imxmci_probe(struct platform_device *pdev)
mmc->f_min = 150000;
mmc->f_max = CLK_RATE/2;
mmc->ocr_avail = MMC_VDD_32_33;
- mmc->caps = MMC_CAP_4_BIT_DATA;
+ mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO |
+ MMC_CAP_SD | MMC_CAP_MMC;
/* MMC core transfer sizes tunable parameters */
mmc->max_hw_segs = 64;
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index a461017..e1a3c7f 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -1386,7 +1386,7 @@ static int mmc_spi_probe(struct spi_device *spi)
mmc->max_req_size = MMC_SPI_BLOCKSATONCE * MMC_SPI_BLOCKSIZE;
mmc->max_blk_count = MMC_SPI_BLOCKSATONCE;
- mmc->caps = MMC_CAP_SPI;
+ mmc->caps = MMC_CAP_SPI | MMC_CAP_SDIO | MMC_CAP_SD | MMC_CAP_MMC;
/* SPI doesn't need the lowspeed device identification thing for
* MMC or SD cards, since it never comes up in open drain mode.
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index e1aa847..55e882b 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -557,6 +557,8 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
mmc->f_max = min(host->mclk, fmax);
mmc->ocr_avail = plat->ocr_mask;
+ mmc->caps = MMC_CAP_SDIO | MMC_CAP_SD | MMC_CAP_MMC;
+
/*
* We can do SGIO
*/
diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c
index 34e2348..1c3f4aa 100644
--- a/drivers/mmc/host/mvsdio.c
+++ b/drivers/mmc/host/mvsdio.c
@@ -734,7 +734,8 @@ static int __init mvsd_probe(struct platform_device *pdev)
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ |
- MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
+ MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED |
+ MMC_CAP_SDIO | MMC_CAP_SD | MMC_CAP_MMC;
mmc->f_min = DIV_ROUND_UP(host->base_clock, MVSD_BASE_DIV_MAX);
mmc->f_max = maxfreq;
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index bc14bb1..d67d639 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -700,7 +700,8 @@ static int mxcmci_probe(struct platform_device *pdev)
}
mmc->ops = &mxcmci_ops;
- mmc->caps = MMC_CAP_4_BIT_DATA;
+ mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_MMC |
+ MMC_CAP_SD | MMC_CAP_SDIO;
/* MMC core transfer sizes tunable parameters */
mmc->max_hw_segs = 64;
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index e7a331d..d6d23e5 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -1314,7 +1314,7 @@ static int __init mmc_omap_new_slot(struct mmc_omap_host *host, int id)
host->slots[id] = slot;
- mmc->caps = 0;
+ mmc->caps = MMC_CAP_SDIO | MMC_CAP_SD | MMC_CAP_MMC;
if (host->pdata->slots[id].wires >= 4)
mmc->caps |= MMC_CAP_4_BIT_DATA;
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index e55ac79..1a71da3 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -598,7 +598,7 @@ static int pxamci_probe(struct platform_device *pdev)
pxamci_init_ocr(host);
- mmc->caps = 0;
+ mmc->caps = MMC_CAP_SDIO | MMC_CAP_SD | MMC_CAP_MMC;
host->cmdat = 0;
if (!cpu_is_pxa25x()) {
mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 8c08cd7..9d73289 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -1376,7 +1376,8 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440)
mmc->ops = &s3cmci_ops;
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
- mmc->caps = MMC_CAP_4_BIT_DATA;
+ mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO |
+ MMC_CAP_SD | MMC_CAP_MMC;
mmc->f_min = host->clk_rate / (host->clk_div * 256);
mmc->f_max = host->clk_rate / host->clk_div;
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 6779b4e..6334938 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1768,7 +1768,7 @@ int sdhci_add_host(struct sdhci_host *host)
mmc->ops = &sdhci_ops;
mmc->f_min = host->max_clk / 256;
mmc->f_max = host->max_clk;
- mmc->caps = MMC_CAP_SDIO_IRQ;
+ mmc->caps = MMC_CAP_SDIO_IRQ | MMC_CAP_SDIO | MMC_CAP_SD | MMC_CAP_MMC;
if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA))
mmc->caps |= MMC_CAP_4_BIT_DATA;
diff --git a/drivers/mmc/host/sdricoh_cs.c b/drivers/mmc/host/sdricoh_cs.c
index cb41e9c..7a24bb1 100644
--- a/drivers/mmc/host/sdricoh_cs.c
+++ b/drivers/mmc/host/sdricoh_cs.c
@@ -443,7 +443,8 @@ static int sdricoh_init_mmc(struct pci_dev *pci_dev,
mmc->f_min = 450000;
mmc->f_max = 24000000;
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
- mmc->caps |= MMC_CAP_4_BIT_DATA;
+ mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO |
+ MMC_CAP_SD | MMC_CAP_MMC;
mmc->max_seg_size = 1024 * 512;
mmc->max_blk_size = 512;
diff --git a/drivers/mmc/host/tifm_sd.c b/drivers/mmc/host/tifm_sd.c
index 82554dd..cb170d5 100644
--- a/drivers/mmc/host/tifm_sd.c
+++ b/drivers/mmc/host/tifm_sd.c
@@ -973,7 +973,8 @@ static int tifm_sd_probe(struct tifm_dev *sock)
mmc->ops = &tifm_sd_ops;
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
- mmc->caps = MMC_CAP_4_BIT_DATA;
+ mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO |
+ MMC_CAP_SD | MMC_CAP_MMC;
mmc->f_min = 20000000 / 60;
mmc->f_max = 24000000;
diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c
index c246191..a14d1af 100644
--- a/drivers/mmc/host/tmio_mmc.c
+++ b/drivers/mmc/host/tmio_mmc.c
@@ -555,7 +555,8 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev)
}
mmc->ops = &tmio_mmc_ops;
- mmc->caps = MMC_CAP_4_BIT_DATA;
+ mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO |
+ MMC_CAP_SD | MMC_CAP_MMC;
mmc->f_max = pdata->hclk;
mmc->f_min = mmc->f_max / 512;
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
diff --git a/drivers/mmc/host/via-sdmmc.c b/drivers/mmc/host/via-sdmmc.c
index 632858a..c6c652a 100644
--- a/drivers/mmc/host/via-sdmmc.c
+++ b/drivers/mmc/host/via-sdmmc.c
@@ -1046,7 +1046,8 @@ static void via_init_mmc_host(struct via_crdr_mmc_host *host)
mmc->f_min = VIA_CRDR_MIN_CLOCK;
mmc->f_max = VIA_CRDR_MAX_CLOCK;
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
- mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED;
+ mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED |
+ MMC_CAP_SDIO | MMC_CAP_SD | MMC_CAP_MMC;
mmc->ops = &via_sdc_ops;
/*Hardware cannot do scatter lists*/
diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c
index 89bf8cd..16f0e5b 100644
--- a/drivers/mmc/host/wbsd.c
+++ b/drivers/mmc/host/wbsd.c
@@ -1219,7 +1219,8 @@ static int __devinit wbsd_alloc_mmc(struct device *dev)
mmc->f_min = 375000;
mmc->f_max = 24000000;
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
- mmc->caps = MMC_CAP_4_BIT_DATA;
+ mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO |
+ MMC_CAP_SD | MMC_CAP_MMC;
spin_lock_init(&host->lock);
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 4ae5766..3902c5c 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -150,6 +150,9 @@ struct mmc_host {
#define MMC_CAP_DISABLE (1 << 7) /* Can the host be disabled */
#define MMC_CAP_NONREMOVABLE (1 << 8) /* Nonremovable e.g. eMMC */
#define MMC_CAP_WAIT_WHILE_BUSY (1 << 9) /* Waits while card is busy */
+#define MMC_CAP_SDIO (1 << 10) /* Card can be SDIO */
+#define MMC_CAP_SD (1 << 11) /* Card can be SD */
+#define MMC_CAP_MMC (1 << 12) /* Card can be MMC */
/* host specific block data */
unsigned int max_seg_size; /* see blk_queue_max_segment_size */
--
1.6.4.rc0
next prev parent reply other threads:[~2009-07-25 23:52 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-10 12:40 [PATCH 0/32] mmc and omap_hsmmc patches Adrian Hunter
2009-07-10 12:40 ` [PATCH 1/32] mmc: add 'enable' and 'disable' methods to mmc host Adrian Hunter
2009-07-10 17:15 ` Madhusudhan
2009-07-10 19:12 ` Adrian Hunter
2009-07-23 20:37 ` Linus Walleij
2009-07-23 20:37 ` Linus Walleij
2009-07-10 12:40 ` [PATCH 2/32] mmc: allow host claim / release nesting Adrian Hunter
2009-07-10 12:40 ` [PATCH 3/32] mmc: add MMC_CAP_NONREMOVABLE host capability Adrian Hunter
2009-07-10 12:40 ` [PATCH 4/32] mmc: add ability to save power by powering off cards Adrian Hunter
2009-07-10 12:40 ` [PATCH 5/32] mmc: add mmc card sleep and awake support Adrian Hunter
2009-07-10 12:40 ` [PATCH 6/32] mmc: power off once at removal Adrian Hunter
2009-07-10 12:40 ` [PATCH 7/32] mmc: add host capabilities for SD only and MMC only Adrian Hunter
2009-07-25 15:53 ` Matt Fleming
2009-07-25 16:17 ` Adrian Hunter
2009-07-25 18:40 ` Matt Fleming
2009-07-25 19:45 ` Adrian Hunter
2009-07-25 23:51 ` Matt Fleming [this message]
2009-07-26 6:14 ` Adrian Hunter
2009-07-10 12:41 ` [PATCH 8/32] mmc: check status after MMC SWITCH command Adrian Hunter
2009-07-10 12:41 ` [PATCH 9/32] omap_hsmmc: add debugfs entry (host registers) Adrian Hunter
2009-07-10 12:41 ` [PATCH 10/32] omap_hsmmc: make use of new enable/disable interface Adrian Hunter
2009-07-10 12:41 ` [PATCH 11/32] ARM: OMAP: mmc-twl4030: add context loss counter support Adrian Hunter
2009-07-10 12:41 ` [PATCH 12/32] omap_hsmmc: keep track of power mode Adrian Hunter
2009-07-10 12:41 ` [PATCH 13/32] omap_hsmmc: context save/restore support Adrian Hunter
2009-07-10 12:41 ` [PATCH 14/32] omap_hsmmc: set open drain bit correctly Adrian Hunter
2009-07-10 12:41 ` [PATCH 15/32] omap_hsmmc: ensure workqueues are empty before suspend Adrian Hunter
2009-07-10 12:41 ` [PATCH 16/32] omap_hsmmc: fix scatter-gather list sanity checking Adrian Hunter
2009-07-10 12:42 ` [PATCH 17/32] omap_hsmmc: make use of new MMC_CAP_NONREMOVABLE host capability Adrian Hunter
2009-07-10 12:42 ` [PATCH 18/32] omap_hsmmc: support for deeper power saving states Adrian Hunter
2009-07-10 12:42 ` [PATCH 19/32] ARM: OMAP: mmc-twl4030: add regulator sleep / wake function Adrian Hunter
2009-07-10 12:42 ` [PATCH 20/32] omap_hsmmc: put MMC regulator to sleep Adrian Hunter
2009-07-24 22:51 ` Andrew Morton
2009-07-24 22:51 ` Andrew Morton
2009-07-26 6:34 ` Adrian Hunter
2009-07-10 12:42 ` [PATCH 21/32] omap_hsmmc: add mmc card sleep and awake support Adrian Hunter
2009-07-10 12:42 ` [PATCH 22/32] omap_hsmmc: fix NULL pointer dereference Adrian Hunter
2009-07-10 12:42 ` [PATCH 23/32] omap_hsmmc: cleanup macro usage Adrian Hunter
2009-07-10 12:42 ` [PATCH 24/32] omap_hsmmc: clear interrupt status after init sequence Adrian Hunter
2009-07-10 12:43 ` [PATCH 25/32] omap_hsmmc: cater for weird CMD6 behaviour Adrian Hunter
2009-07-10 12:43 ` [PATCH 26/32] omap_hsmmc: prevent races with irq handler Adrian Hunter
2009-07-24 22:53 ` Andrew Morton
2009-07-24 22:53 ` Andrew Morton
2009-07-27 9:06 ` Adrian Hunter
2009-07-10 12:43 ` [PATCH 27/32] omap_hsmmc: pass host capabilities for SD only and MMC only Adrian Hunter
2009-07-10 12:43 ` [PATCH 28/32] omap_hsmmc: code refactoring Adrian Hunter
2009-07-10 12:43 ` [PATCH 29/32] omap_hsmmc: protect the card when the cover is open Adrian Hunter
2009-07-10 12:43 ` [PATCH 30/32] omap_hsmmc: ensure all clock enables and disables are paired Adrian Hunter
2009-07-10 12:43 ` [PATCH 31/32] omap_hsmmc: set a large data timeout for commands with busy signal Adrian Hunter
2009-07-10 12:43 ` [PATCH 32/32] ARM: OMAP: RX51: set MMC capabilities and power-saving flag Adrian Hunter
2009-07-25 23:53 ` Matt Fleming
2009-07-27 7:58 ` Adrian Hunter
2009-07-27 8:27 ` Matt Fleming
2009-07-27 8:58 ` Adrian Hunter
2009-07-27 9:15 ` Matt Fleming
[not found] ` <20090727102111.GI12665@console-pimps.org>
2009-07-27 11:02 ` Adrian Hunter
2009-07-27 18:14 ` Andrew Morton
2009-07-27 19:32 ` Matt Fleming
2009-07-26 19:57 ` [PATCH 0/32] mmc and omap_hsmmc patches Matt Fleming
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090725235150.GD12665@console-pimps.org \
--to=matt@console-pimps.org \
--cc=adrian.hunter@nokia.com \
--cc=akpm@linux-foundation.org \
--cc=ext-denis.2.karpov@nokia.com \
--cc=jarkko.lavinen@nokia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=pierre@ossman.eu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.