[PATCH kvm-unit-tests 10/10] Add the 32bit smp initialization code

From: Jason Wang <jasowang@redhat.com>
To: jasowang@redhat.com, mtosatti@redhat.com, avi@redhat.com,
	kvm@vger.kernel.org
Subject: [PATCH kvm-unit-tests 10/10] Add the 32bit smp initialization code
Date: Tue, 24 Aug 2010 21:48:06 +0800	[thread overview]
Message-ID: <20100824134806.17082.98122.stgit@FreeLancer> (raw)
In-Reply-To: <20100824134523.17082.8727.stgit@FreeLancer>

Add the smp initlaization codes for 32bit. This would make the 32bit
smp tests available.

Signed-off-by: Jason Wang <jasowang@redhat.com>
---
 x86/cstart.S |  179 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++--
 1 files changed, 173 insertions(+), 6 deletions(-)

diff --git a/x86/cstart.S b/x86/cstart.S
index 1bdf789..6ce200d 100644
--- a/x86/cstart.S
+++ b/x86/cstart.S
@@ -1,9 +1,65 @@
 
+#include "apic-defs.h"
+
+.globl boot_idt
+boot_idt = 0
+
+ipi_vector = 0x20
+
+max_cpus = 4
 
 .bss
 
+	. = . + 4096 * max_cpus
+	.align 16
+stacktop:
+
+	. = . + 4096
+	.align 16
+ring0stacktop:
+
+.data
+
+.align 4096
+pt:
+i = 0
+        .rept 1024
+        .long 0x1e7 | (i << 22)
+        i = i + 1
+        .endr
+
+gdt32:
+	.quad 0
+	.quad 0x00cf9b000000ffff // flat 32-bit code segment
+	.quad 0x00cf93000000ffff // flat 32-bit data segment
+
+tss_descr:
+        .rept max_cpus
+        .quad 0x000089000000ffff // 32-bit avail tss
+        .endr
+gdt32_end:
+
+i = 0
+tss:
+        .rept max_cpus
+        .long 0
+        .long ring0stacktop - i * 4096
+        .long 0
+        .quad 0, 0, 0
+        .quad 0, 0, 0, 0, 0, 0, 0
+        .long 0, 0, 0
+        i = i + 1
+        .endr
+tss_end:
+
+idt_descr:
+	.word 16 * 256 - 1
+	.long boot_idt
+
 .section .init
 
+.code32
+
 mb_magic = 0x1BADB002
 mb_flags = 0x0
 
@@ -11,15 +67,126 @@ mb_flags = 0x0
 	.long mb_magic, mb_flags, 0 - (mb_magic + mb_flags)
 mb_cmdline = 16
 
+MSR_GS_BASE = 0xc0000101
+
+.macro setup_percpu_area
+	lea -4096(%esp), %eax
+	mov $0, %edx
+	mov $MSR_GS_BASE, %ecx
+	wrmsr
+.endm
+
 .globl start
 start:
-	mov mb_cmdline(%ebx), %eax
-	mov %eax, __args
-	call __setup_args
-	pushl $__argv
-	pushl __argc
-	call main
+        mov mb_cmdline(%ebx), %eax
+        mov %eax, __args
+        call __setup_args
+        mov $stacktop, %esp
+        setup_percpu_area
+        call prepare_32
+        jmpl $8, $start32
+
+prepare_32:
+        lgdtl gdt32_descr
+
+	mov %cr4, %eax
+	bts $4, %eax  // pse
+	mov %eax, %cr4
+
+	mov $pt, %eax
+	mov %eax, %cr3
+
+	mov %cr0, %eax
+	bts $0, %eax
+	bts $31, %eax
+	mov %eax, %cr0
+	ret
+
+smp_stacktop:	.long 0xa0000
+
+ap_start32:
+	mov $0x10, %ax
+	mov %ax, %ds
+	mov %ax, %es
+	mov %ax, %fs
+	mov %ax, %gs
+	mov %ax, %ss
+	mov $-4096, %esp
+	lock/xaddl %esp, smp_stacktop
+	setup_percpu_area
+	call prepare_32
+	call load_tss
+	call enable_apic
+	call enable_x2apic
+	sti
+	nop
+	lock incw cpu_online_count
+
+1:	hlt
+	jmp 1b
+
+start32:
+	call load_tss
+	call mask_pic_interrupts
+	call enable_apic
+	call smp_init
+	call enable_x2apic
+        push $__argv
+        push __argc
+        call main
 	push %eax
 	call exit
 
+load_tss:
+	lidt idt_descr
+	mov $16, %eax
+	mov %ax, %ss
+	mov $(APIC_DEFAULT_PHYS_BASE + APIC_ID), %eax
+	mov (%eax), %eax
+	shr $24, %eax
+	mov %eax, %ebx
+	shl $3, %ebx
+	mov $((tss_end - tss) / max_cpus), %edx
+	imul %edx
+	add $tss, %eax
+	mov %ax, tss_descr+2(%ebx)
+	shr $16, %eax
+	mov %al, tss_descr+4(%ebx)
+	shr $8, %eax
+	mov %al, tss_descr+7(%ebx)
+	lea tss_descr-gdt32(%ebx), %eax
+	ltr %ax
+	ret
+
+smp_init:
+	cld
+	lea sipi_entry, %esi
+	xor %edi, %edi
+	mov $(sipi_end - sipi_entry), %ecx
+	rep/movsb
+	mov $APIC_DEFAULT_PHYS_BASE, %eax
+	movl $(APIC_DEST_ALLBUT | APIC_DEST_PHYSICAL | APIC_DM_INIT | APIC_INT_ASSERT), APIC_ICR(%eax)
+	movl $(APIC_DEST_ALLBUT | APIC_DEST_PHYSICAL | APIC_DM_INIT), APIC_ICR(%eax)
+	movl $(APIC_DEST_ALLBUT | APIC_DEST_PHYSICAL | APIC_DM_STARTUP), APIC_ICR(%eax)
+	call fwcfg_get_nb_cpus
+1:	pause
+	cmpw %ax, cpu_online_count
+	jne 1b
+smp_init_done:
+	ret
+
+cpu_online_count:	.word 1
+
+.code16
+sipi_entry:
+	mov %cr0, %eax
+	or $1, %eax
+	mov %eax, %cr0
+	lgdtl gdt32_descr - sipi_entry
+	ljmpl $8, $ap_start32
+
+gdt32_descr:
+	.word gdt32_end - gdt32 - 1
+	.long gdt32
 
+sipi_end:

