From: Felix Blanke <felixblanke@gmail.com>
To: linux-btrfs@vger.kernel.org
Cc: Hugo Mills <hugo-lkml@carfax.org.uk>
Subject: Re: Bug in mkfs.btrfs?!
Date: Sat, 22 Jan 2011 16:56:12 +0100 [thread overview]
Message-ID: <20110122155612.GA3664@scooter> (raw)
In-Reply-To: <20110122151124.GC29985@carfax.org.uk>
[-- Attachment #1: Type: text/plain, Size: 2877 bytes --]
It was a simple:
mkfs.btrfs -L backup -d single /dev/loop2
But it also happens without the options, like:
mkfs.btrfs /dev/loop2
/dev/loop2 is a loop device, which is aes encrypted. The output of "losetup /dev/loop2":
/dev/loop2: [0010]:5324
(/dev/disk/by-id/ata-WDC_WD6400AAKS-22A7B2_WD-WCASY7780706-part3) encryption=AES128
Thanks you for looking into this!
While writing this I read your second mail. The strace output is attached.
Regards,
Felix
P.S.: The btrfs wiki is down. If someone reads this and have time to answer:
Means "-d single" that the data are not spread across the devices? The default is
raid0, right? I want some kind of security that if a device crashes only the
files on that damaged device are gone. Raid1 will be the next step, but act. I don't
have money for that :)
On 22. January 2011 - 15:11, Hugo Mills wrote:
> Date: Sat, 22 Jan 2011 15:11:24 +0000
> From: Hugo Mills <hugo-lkml@carfax.org.uk>
> To: Felix Blanke <felixblanke@gmail.com>
> Cc: linux-btrfs@vger.kernel.org
> Subject: Re: Bug in mkfs.btrfs?!
> Mail-Followup-To: Hugo Mills <hugo-lkml@carfax.org.uk>, Felix Blanke
> <felixblanke@gmail.com>, linux-btrfs@vger.kernel.org
>
> On Sat, Jan 22, 2011 at 03:52:22PM +0100, Felix Blanke wrote:
> > I was able to create the fs with the --force options. But that bug should be fixed,
> > too :)
> >
> > Is that link maybe too long? It is created by udev, and there was never a problem
> > using that link.
>
> Yes, it certainly looks like it. There's 63 characters in the name
> in your strace report, so it looks like it's being truncated somewhere.
>
> What was the exact command line you used to get the error?
>
> Hugo.
>
> > Regards,
> > Felix
> >
> > On 22. January 2011 - 15:45, Felix Blanke wrote:
> > > Date: Sat, 22 Jan 2011 15:45:13 +0100
> > > From: Felix Blanke <felixblanke@gmail.com>
> > > To: linux-btrfs@vger.kernel.org
> > > Subject: Bug in mkfs.btrfs?!
> > >
> > > Hi,
> > >
> > > I wanted to create a new btrfs fs for my backups.
> > > When trying to mkfs.btrfs for that device, I'm getting
> > >
> > > "error checking /dev/loop2 mount status"
> > >
> > >
> > > With strace I see where the problem is:
> > >
> > > lstat("/dev/disk/by-id/ata-INTEL_SSDSA2M160G2GC_CVPO939201JX160AGN-par",
> > > 0x7fffa30b3cf0) = -1 ENOENT (No such file or directory)
> > >
> > >
> > >
> > > The problem is there is something missing at the end of the link, should be
> > > something like "-part1", "-part2" etc.
> > >
> > >
> > > I'll try the patch with the --foce option.
> > >
> > > Regards,
> > > Felix
> > >
> > ---end quoted text---
>
> --
> === Hugo Mills: hugo@... carfax.org.uk | darksatanic.net | lug.org.uk ===
> PGP key: 515C238D from wwwkeys.eu.pgp.net or http://www.carfax.org.uk
> --- Great oxymorons of the world, no. 9: Standard Deviation ---
---end quoted text---
[-- Attachment #2: strace --]
[-- Type: text/plain, Size: 7366 bytes --]
execve("/sbin/mkfs.btrfs", ["mkfs.btrfs", "/dev/loop2"], [/* 41 vars */]) = 0
brk(0) = 0x653000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fcd7e42d000
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=156346, ...}) = 0
mmap(NULL, 156346, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fcd7e406000
close(3) = 0
open("/lib/libuuid.so.1", O_RDONLY) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\20\27\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=18776, ...}) = 0
mmap(NULL, 2113952, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fcd7e00c000
mprotect(0x7fcd7e010000, 2093056, PROT_NONE) = 0
mmap(0x7fcd7e20f000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3000) = 0x7fcd7e20f000
close(3) = 0
open("/lib/libc.so.6", O_RDONLY) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\200\354\1\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=1424672, ...}) = 0
mmap(NULL, 3533704, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fcd7dcad000
mprotect(0x7fcd7de02000, 2097152, PROT_NONE) = 0
mmap(0x7fcd7e002000, 20480, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x155000) = 0x7fcd7e002000
mmap(0x7fcd7e007000, 19336, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fcd7e007000
close(3) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fcd7e405000
mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fcd7e403000
arch_prctl(ARCH_SET_FS, 0x7fcd7e403740) = 0
mprotect(0x7fcd7e002000, 16384, PROT_READ) = 0
mprotect(0x7fcd7e20f000, 4096, PROT_READ) = 0
mprotect(0x620000, 4096, PROT_READ) = 0
mprotect(0x7fcd7e42e000, 4096, PROT_READ) = 0
munmap(0x7fcd7e406000, 156346) = 0
fstat(1, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 2), ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fcd7e42c000
write(1, "\n", 1) = 1
write(1, "WARNING! - Btrfs v0.19-35-g1b444"..., 57) = 57
write(1, "WARNING! - see http://btrfs.wiki"..., 57) = 57
write(1, "\n", 1) = 1
open("/dev/loop2", O_RDONLY) = 3
brk(0) = 0x653000
brk(0x675000) = 0x675000
pread(3, "D\345\355-\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 2859, 65536) = 2859
pread(3, "\344\204\305\343\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 2859, 67108864) = 2859
pread(3, "\31\3\223\322\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 2859, 274877906944) = 2859
close(3) = 0
open("/proc/mounts", O_RDONLY) = 3
fstat(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fcd7e42b000
read(3, "rootfs / rootfs rw 0 0\n/dev/sdb4"..., 1024) = 877
stat("/dev/loop2", {st_mode=S_IFBLK|0660, st_rdev=makedev(7, 2), ...}) = 0
open("/dev/loop2", O_RDONLY) = 4
ioctl(4, 0x4c03, 0x7fffbbd8a660) = 0
close(4) = 0
stat("/dev/sdb4", {st_mode=S_IFBLK|0660, st_rdev=makedev(8, 20), ...}) = 0
lstat("/dev", {st_mode=S_IFDIR|0755, st_size=3620, ...}) = 0
lstat("/dev/disk", {st_mode=S_IFDIR|0755, st_size=120, ...}) = 0
lstat("/dev/disk/by-id", {st_mode=S_IFDIR|0755, st_size=820, ...}) = 0
lstat("/dev/disk/by-id/ata-WDC_WD6400AAKS-22A7B2_WD-WCASY7780706-part3", {st_mode=S_IFLNK|0777, st_size=10, ...}) = 0
readlink("/dev/disk/by-id/ata-WDC_WD6400AAKS-22A7B2_WD-WCASY7780706-part3", "../../sda3", 4095) = 10
lstat("/dev/sda3", {st_mode=S_IFBLK|0660, st_rdev=makedev(8, 3), ...}) = 0
lstat("/dev", {st_mode=S_IFDIR|0755, st_size=3620, ...}) = 0
lstat("/dev/sdb4", {st_mode=S_IFBLK|0660, st_rdev=makedev(8, 20), ...}) = 0
stat("/dev/disk/by-id/ata-WDC_WD6400AAKS-22A7B2_WD-WCASY7780706-part3", {st_mode=S_IFBLK|0660, st_rdev=makedev(8, 3), ...}) = 0
stat("/dev/sdb4", {st_mode=S_IFBLK|0660, st_rdev=makedev(8, 20), ...}) = 0
stat("/dev/loop2", {st_mode=S_IFBLK|0660, st_rdev=makedev(7, 2), ...}) = 0
open("/dev/loop2", O_RDONLY) = 4
ioctl(4, 0x4c03, 0x7fffbbd8a660) = 0
close(4) = 0
stat("/dev/loop4", {st_mode=S_IFBLK|0660, st_rdev=makedev(7, 4), ...}) = 0
open("/dev/loop4", O_RDONLY) = 4
ioctl(4, 0x4c03, 0x7fffbbd8a660) = 0
close(4) = 0
lstat("/dev", {st_mode=S_IFDIR|0755, st_size=3620, ...}) = 0
lstat("/dev/disk", {st_mode=S_IFDIR|0755, st_size=120, ...}) = 0
lstat("/dev/disk/by-id", {st_mode=S_IFDIR|0755, st_size=820, ...}) = 0
lstat("/dev/disk/by-id/ata-WDC_WD6400AAKS-22A7B2_WD-WCASY7780706-part3", {st_mode=S_IFLNK|0777, st_size=10, ...}) = 0
readlink("/dev/disk/by-id/ata-WDC_WD6400AAKS-22A7B2_WD-WCASY7780706-part3", "../../sda3", 4095) = 10
lstat("/dev/sda3", {st_mode=S_IFBLK|0660, st_rdev=makedev(8, 3), ...}) = 0
lstat("/dev", {st_mode=S_IFDIR|0755, st_size=3620, ...}) = 0
lstat("/dev/disk", {st_mode=S_IFDIR|0755, st_size=120, ...}) = 0
lstat("/dev/disk/by-id", {st_mode=S_IFDIR|0755, st_size=820, ...}) = 0
lstat("/dev/disk/by-id/ata-WDC_WD5000AAKS-65YGA0_WD-WCAS82030114-part1", {st_mode=S_IFLNK|0777, st_size=10, ...}) = 0
readlink("/dev/disk/by-id/ata-WDC_WD5000AAKS-65YGA0_WD-WCAS82030114-part1", "../../sdd1", 4095) = 10
lstat("/dev/sdd1", {st_mode=S_IFBLK|0660, st_rdev=makedev(8, 49), ...}) = 0
stat("/dev/disk/by-id/ata-WDC_WD6400AAKS-22A7B2_WD-WCASY7780706-part3", {st_mode=S_IFBLK|0660, st_rdev=makedev(8, 3), ...}) = 0
stat("/dev/disk/by-id/ata-WDC_WD5000AAKS-65YGA0_WD-WCAS82030114-part1", {st_mode=S_IFBLK|0660, st_rdev=makedev(8, 49), ...}) = 0
stat("/dev/loop2", {st_mode=S_IFBLK|0660, st_rdev=makedev(7, 2), ...}) = 0
open("/dev/loop2", O_RDONLY) = 4
ioctl(4, 0x4c03, 0x7fffbbd8a660) = 0
close(4) = 0
stat("/dev/loop1", {st_mode=S_IFBLK|0660, st_rdev=makedev(7, 1), ...}) = 0
open("/dev/loop1", O_RDONLY) = 4
ioctl(4, 0x4c03, 0x7fffbbd8a660) = 0
close(4) = 0
lstat("/dev", {st_mode=S_IFDIR|0755, st_size=3620, ...}) = 0
lstat("/dev/disk", {st_mode=S_IFDIR|0755, st_size=120, ...}) = 0
lstat("/dev/disk/by-id", {st_mode=S_IFDIR|0755, st_size=820, ...}) = 0
lstat("/dev/disk/by-id/ata-WDC_WD6400AAKS-22A7B2_WD-WCASY7780706-part3", {st_mode=S_IFLNK|0777, st_size=10, ...}) = 0
readlink("/dev/disk/by-id/ata-WDC_WD6400AAKS-22A7B2_WD-WCASY7780706-part3", "../../sda3", 4095) = 10
lstat("/dev/sda3", {st_mode=S_IFBLK|0660, st_rdev=makedev(8, 3), ...}) = 0
lstat("/dev", {st_mode=S_IFDIR|0755, st_size=3620, ...}) = 0
lstat("/dev/disk", {st_mode=S_IFDIR|0755, st_size=120, ...}) = 0
lstat("/dev/disk/by-id", {st_mode=S_IFDIR|0755, st_size=820, ...}) = 0
lstat("/dev/disk/by-id/ata-INTEL_SSDSA2M160G2GC_CVPO939201JX160AGN-par", 0x7fffbbd88520) = -1 ENOENT (No such file or directory)
close(3) = 0
munmap(0x7fcd7e42b000, 4096) = 0
write(2, "error checking /dev/loop2 mount "..., 39) = 39
exit_group(1) = ?
next prev parent reply other threads:[~2011-01-22 15:56 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-22 14:45 Bug in mkfs.btrfs?! Felix Blanke
2011-01-22 14:52 ` Felix Blanke
2011-01-22 15:11 ` Hugo Mills
2011-01-22 15:45 ` Hugo Mills
2011-01-22 15:56 ` Felix Blanke [this message]
2011-01-22 22:54 ` Chris Samuel
2011-01-22 23:03 ` Felix Blanke
2011-01-23 18:18 ` Hugo Mills
2011-01-23 22:02 ` Goffredo Baroncelli
2011-01-23 23:15 ` Felix Blanke
2011-01-24 7:42 ` Helmut Hullen
2011-01-24 9:41 ` Felix Blanke
2011-01-23 23:27 ` Hugo Mills
2011-01-23 23:58 ` Felix Blanke
2011-01-24 1:53 ` Fajar A. Nugraha
2011-01-24 9:38 ` Felix Blanke
2011-01-24 13:01 ` Felix Blanke
2011-01-24 13:13 ` Hugo Mills
2011-01-24 13:53 ` Felix Blanke
2011-01-24 14:29 ` Hugo Mills
2011-01-24 14:34 ` Hugo Mills
2011-01-24 14:44 ` Felix Blanke
2011-01-24 16:52 ` Felix Blanke
2011-01-24 17:00 ` Hugo Mills
2011-01-24 21:04 ` Felix Blanke
2011-01-24 21:14 ` Felix Blanke
2011-01-24 14:35 ` Felix Blanke
2011-01-25 0:15 ` LOOP_GET_STATUS(64) truncates pathnames to 64 chars (was Re: Bug in mkfs.btrfs?!) Chris Samuel
2011-02-10 12:29 ` Petr Uzel
2011-02-11 13:04 ` Felix Blanke
2011-02-11 13:04 ` Felix Blanke
2011-02-11 18:59 ` Milan Broz
[not found] ` <AANLkTi=Arg-09F0DXsWNhsYgyPar=rKs7G_OQG2uMm4f@mail.gmail.com>
2011-02-11 19:31 ` Milan Broz
2011-02-11 19:41 ` Felix Blanke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110122155612.GA3664@scooter \
--to=felixblanke@gmail.com \
--cc=hugo-lkml@carfax.org.uk \
--cc=linux-btrfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.