All of lore.kernel.org
 help / color / mirror / Atom feed
From: Eduardo Valentin <eduardo.valentin@ti.com>
To: Zhang Rui <rui.zhang@intel.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>,
	Matthew Garrett <mjg@redhat.com>, Len Brown <lenb@kernel.org>,
	R Durgadoss <durgadoss.r@intel.com>,
	Eduardo Valentin <eduardo.valentin@ti.com>,
	Amit Kachhap <amit.kachhap@linaro.org>, Wei Ni <wni@nvidia.com>,
	linux-acpi@vger.kernel.org, linux-pm@vger.kernel.org
Subject: Re: [PATCH V4 09/13] Thermal: Rename thermal_instance.node to thermal_instance.tz_node.
Date: Mon, 20 Aug 2012 18:47:01 +0300	[thread overview]
Message-ID: <20120820154701.GF9833@besouro> (raw)
In-Reply-To: <1343292083-2047-10-git-send-email-rui.zhang@intel.com>

On Thu, Jul 26, 2012 at 04:41:19PM +0800, Zhang Rui wrote:
> thermal_instance should be referenced by both thermal zone devices
> and thermal cooling devices.
> 
> Rename thermal_instance.node to thermal_instance.tz_node in this patch
> and thermal_instanace.cdev_node will be introduced in next patch.
> 
> Reviewed-by: Rafael J. Wysocki <rjw@sisk.pl>
> Signed-off-by: Zhang Rui <rui.zhang@intel.com>

Reviewed-by: Eduardo Valentin <eduardo.valentin@ti.com>

> ---
>  drivers/thermal/thermal_sys.c |   20 ++++++++++----------
>  1 file changed, 10 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c
> index 112227e..b2a2d48 100644
> --- a/drivers/thermal/thermal_sys.c
> +++ b/drivers/thermal/thermal_sys.c
> @@ -56,7 +56,7 @@ struct thermal_instance {
>  	unsigned long lower;	/* Lowest cooling state for this trip point */
>  	char attr_name[THERMAL_NAME_LENGTH];
>  	struct device_attribute attr;
> -	struct list_head node;
> +	struct list_head tz_node; /* node in tz->thermal_instances */
>  };
>  
>  static DEFINE_IDR(thermal_tz_idr);
> @@ -746,7 +746,7 @@ static void thermal_zone_device_passive(struct thermal_zone_device *tz,
>  		/* Heating up? */
>  		if (trend == THERMAL_TREND_RAISING) {
>  			list_for_each_entry(instance, &tz->thermal_instances,
> -					    node) {
> +					    tz_node) {
>  				if (instance->trip != trip)
>  					continue;
>  				cdev = instance->cdev;
> @@ -757,7 +757,7 @@ static void thermal_zone_device_passive(struct thermal_zone_device *tz,
>  			}
>  		} else if (trend == THERMAL_TREND_DROPPING) { /* Cooling off? */
>  			list_for_each_entry(instance, &tz->thermal_instances,
> -					    node) {
> +					    tz_node) {
>  				if (instance->trip != trip)
>  					continue;
>  				cdev = instance->cdev;
> @@ -777,7 +777,7 @@ static void thermal_zone_device_passive(struct thermal_zone_device *tz,
>  	 * and avoid thrashing around the passive trip point.  Note that we
>  	 * assume symmetry.
>  	 */
> -	list_for_each_entry(instance, &tz->thermal_instances, node) {
> +	list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
>  		if (instance->trip != trip)
>  			continue;
>  		cdev = instance->cdev;
> @@ -873,13 +873,13 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
>  		goto remove_symbol_link;
>  
>  	mutex_lock(&tz->lock);
> -	list_for_each_entry(pos, &tz->thermal_instances, node)
> +	list_for_each_entry(pos, &tz->thermal_instances, tz_node)
>  	    if (pos->tz == tz && pos->trip == trip && pos->cdev == cdev) {
>  		result = -EEXIST;
>  		break;
>  	}
>  	if (!result)
> -		list_add_tail(&dev->node, &tz->thermal_instances);
> +		list_add_tail(&dev->tz_node, &tz->thermal_instances);
>  	mutex_unlock(&tz->lock);
>  
>  	if (!result)
> @@ -912,9 +912,9 @@ int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz,
>  	struct thermal_instance *pos, *next;
>  
>  	mutex_lock(&tz->lock);
> -	list_for_each_entry_safe(pos, next, &tz->thermal_instances, node) {
> +	list_for_each_entry_safe(pos, next, &tz->thermal_instances, tz_node) {
>  		if (pos->tz == tz && pos->trip == trip && pos->cdev == cdev) {
> -			list_del(&pos->node);
> +			list_del(&pos->tz_node);
>  			mutex_unlock(&tz->lock);
>  			goto unbind;
>  		}
> @@ -1117,7 +1117,7 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz,
>  	}
>  
>  	if (temp >= trip_temp) {
> -		list_for_each_entry(instance, &tz->thermal_instances, node) {
> +		list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
>  			if (instance->trip != trip)
>  				continue;
>  
> @@ -1136,7 +1136,7 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz,
>  			cdev->ops->set_cur_state(cdev, cur_state);
>  		}
>  	} else {	/* below trip */
> -		list_for_each_entry(instance, &tz->thermal_instances, node) {
> +		list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
>  			if (instance->trip != trip)
>  				continue;
>  
> -- 
> 1.7.9.5
> 

  reply	other threads:[~2012-08-20 15:47 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-07-26  8:41 [PATCH V4 00/13] Thermal: generic thermal layer enhancement Zhang Rui
2012-07-26  8:41 ` [PATCH V4 01/13] Thermal: Introduce multiple cooling states support Zhang Rui
2012-08-08 12:02   ` Valentin, Eduardo
2012-08-09  0:58     ` Zhang Rui
2012-07-26  8:41 ` [PATCH V4 02/13] Thermal: Introduce cooling states range support Zhang Rui
2012-08-20 15:51   ` Eduardo Valentin
2012-07-26  8:41 ` [PATCH V4 03/13] Thermal: set upper and lower limits Zhang Rui
2012-08-20 15:50   ` Eduardo Valentin
2012-07-26  8:41 ` [PATCH V4 04/13] Thermal: Introduce .get_trend() callback Zhang Rui
2012-07-26 20:11   ` Rafael J. Wysocki
2012-08-01  2:42     ` Zhang Rui
2012-08-08 13:46       ` Valentin, Eduardo
2012-08-08 13:44   ` Valentin, Eduardo
2012-07-26  8:41 ` [PATCH V4 05/13] Thermal: Remove tc1/tc2 in generic thermal layer Zhang Rui
2012-07-26 20:11   ` Rafael J. Wysocki
2012-08-08 14:06   ` Valentin, Eduardo
2012-08-09  0:57     ` Zhang Rui
2012-08-09  8:05       ` Valentin, Eduardo
2012-08-09 15:10       ` Valentin, Eduardo
2012-08-20 12:18         ` Eduardo Valentin
2012-08-21  0:49           ` Zhang Rui
2012-08-21 14:20             ` Eduardo Valentin
2012-07-26  8:41 ` [PATCH V4 06/13] Thermal: Introduce thermal_zone_trip_update() Zhang Rui
2012-07-26 20:12   ` Rafael J. Wysocki
2012-08-20 15:47   ` Eduardo Valentin
2012-08-20 15:48   ` Eduardo Valentin
2012-07-26  8:41 ` [PATCH V4 07/13] Thermal: rename structure thermal_cooling_device_instance to thermal_instance Zhang Rui
2012-08-20 15:47   ` Eduardo Valentin
2012-07-26  8:41 ` [PATCH V4 08/13] Thermal: Rename thermal_zone_device.cooling_devices Zhang Rui
2012-08-20 15:47   ` Eduardo Valentin
2012-07-26  8:41 ` [PATCH V4 09/13] Thermal: Rename thermal_instance.node to thermal_instance.tz_node Zhang Rui
2012-08-20 15:47   ` Eduardo Valentin [this message]
2012-07-26  8:41 ` [PATCH V4 10/13] Thermal: List thermal_instance in thermal_cooling_device Zhang Rui
2012-08-20 15:46   ` Eduardo Valentin
2012-07-26  8:41 ` [PATCH V4 11/13] Thermal: Introduce simple arbitrator for setting device cooling state Zhang Rui
2012-08-20 15:46   ` Eduardo Valentin
2012-07-26  8:41 ` [PATCH V4 12/13] Thermal: Unify the code for both active and passive cooling Zhang Rui
2012-08-20 15:45   ` Eduardo Valentin
2012-07-26  8:41 ` [PATCH V4 13/13] Thermal: Introduce locking for cdev.thermal_instances list Zhang Rui
2012-07-26 20:13   ` Rafael J. Wysocki
2012-08-20 15:45   ` Eduardo Valentin
2012-08-21  0:53     ` Zhang Rui
2012-08-21  5:01       ` Eduardo Valentin
2012-08-20 15:53 ` [PATCH V4 00/13] Thermal: generic thermal layer enhancement Eduardo Valentin
2012-08-21  5:10   ` Eduardo Valentin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120820154701.GF9833@besouro \
    --to=eduardo.valentin@ti.com \
    --cc=amit.kachhap@linaro.org \
    --cc=durgadoss.r@intel.com \
    --cc=lenb@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mjg@redhat.com \
    --cc=rjw@sisk.pl \
    --cc=rui.zhang@intel.com \
    --cc=wni@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.