All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Hutterer <peter.hutterer@who-t.net>
To: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Cc: Gabriele Mazzotta <gabriele.mzt@gmail.com>,
	Hans de Goede <hdegoede@redhat.com>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Henrik Rydberg <rydberg@euromail.se>,
	linux-input <linux-input@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Maxwell Anselm <silverhammermba@gmail.com>
Subject: Re: [PATCH 1/2] input: synaptics - make image sensors report ABS_MT_TOUCH_MAJOR
Date: Wed, 7 Jan 2015 16:02:29 +1000	[thread overview]
Message-ID: <20150107060229.GA17069@jelly.redhat.com> (raw)
In-Reply-To: <CAN+gG=Fhaj2aQM7gxXZBaXx3MZQbdMdCZ7KO=nmhzufp4YqnmA@mail.gmail.com>

On Mon, Jan 05, 2015 at 02:24:30PM -0500, Benjamin Tissoires wrote:
> Hi Gabriele,
> 
> [Adding Peter and Hans as this change will impact both
> xf86-input-synaptics and libinput]
> 
> On Sat, Dec 27, 2014 at 6:31 AM, Gabriele Mazzotta
> <gabriele.mzt@gmail.com> wrote:
> > Despite claiming to be able to report ABS_TOOL_WIDTH, image sensors
> > were not doing it. Make them report widths and use ABS_MT_TOUCH_MAJOR
> > instead ABS_TOOL_WIDTH.
> 
> It looks like the current xorg-synaptics code already handles
> ABS_MT_TOUCH_MAJOR as finger_width. So I think we should be good in
> replacing the ABS_TOOL_WIDTH event. However, I'd prefer having Peter
> confirm this because xorg-synaptics still relies a lot on the single
> touch emulation.

synaptics doesn't actually use TOUCH_MAJOR for finger width, we just forward
it as axis information (not that anyone uses it).
dropping TOOL_WIDTH would only affect palm detection which unreliable, off
by default and mostly broken. so this is fine with me.

Cheers,
   Peter

> 
> >
> > Since the 'w' slot is used to report the finger count when two or more
> > fingers are on the touchpad, make sure that only meaningful values are
> > emitted, i.e. values greater than or equal to 4, and assign the correct
> > range to ABS_MT_TOUCH_MAJOR.
> >
> > Link: https://bugzilla.kernel.org/show_bug.cgi?id=77161
> > Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
> > ---
> >  drivers/input/mouse/synaptics.c | 11 +++++++++--
> >  1 file changed, 9 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
> > index f947292..ea0563e 100644
> > --- a/drivers/input/mouse/synaptics.c
> > +++ b/drivers/input/mouse/synaptics.c
> > @@ -814,6 +814,8 @@ static void synaptics_report_slot(struct input_dev *dev, int slot,
> 
> Just FYI, this does not apply anymore on top of Dmitry's tree.
> synaptics_report_slot() has been removed, and you should now report
> the slot state in synaptics_report_mt_data().
> 
> >         input_report_abs(dev, ABS_MT_POSITION_X, hw->x);
> >         input_report_abs(dev, ABS_MT_POSITION_Y, synaptics_invert_y(hw->y));
> >         input_report_abs(dev, ABS_MT_PRESSURE, hw->z);
> > +       if (hw->w >= 4)
> 
> That I don't like. IMO, at this point, .w should only contain the
> finger width, unconditionally.
> Also, with 2/2, .w is computed accurately for the second finger, but
> not for the first.
> 
> I tried to figure out a way to properly extract the actual width
> information from the sgm packet when the w is 0 or 1, and the only way
> I found was to do the fix in synaptics_image_sensor_process(). I would
> have preferred dealing with that in synaptics_parse_hw_state()
> directly, but I think the final code would be more and more ugly.
> Dealing with the true finger width in synaptics_image_sensor_process()
> is not a problem for cr48 sensors, because they will not have the
> ABS_MT_TOUCH_MAJOR event exported.
> 
> Anyway, something like that "should" work (sorry for the tab/space,
> gmail in use), of course, this is untested when I send the mail :) :
> 
> diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
> index 95c15451..caf7ccd 100644
> --- a/drivers/input/mouse/synaptics.c
> +++ b/drivers/input/mouse/synaptics.c
> @@ -852,6 +852,17 @@ static void synaptics_image_sensor_process(struct
> psmouse *psmouse,
>         else
>                 num_fingers = 4;
> 
> +       /* When multiple fingers are on the TouchPad, the width is encoded in
> +        * X, Y and Z */
> +       if (sgm->w == 0 || sgm->w == 1) {
> +               sgm->w = ((sgm->x & BIT(1)) >> 1) |
> +                         (sgm->y & BIT(1)) |
> +                        ((sgm->z & BIT(0)) << 1);
> +               sgm->x &= ~BIT(1);
> +               sgm->y &= ~BIT(1);
> +               sgm->z &= ~BIT(0);
> +       }
> +
>         /* Send resulting input events to user space */
>         synaptics_report_mt_data(psmouse, sgm, num_fingers);
>  }
> 
> 
> > +               input_report_abs(dev, ABS_MT_TOUCH_MAJOR, hw->w);
> >  }
> >
> >  static void synaptics_report_mt_data(struct psmouse *psmouse,
> > @@ -1462,8 +1464,13 @@ static void set_input_params(struct psmouse *psmouse,
> >                                         INPUT_MT_TRACK : INPUT_MT_SEMI_MT));
> >         }
> >
> > -       if (SYN_CAP_PALMDETECT(priv->capabilities))
> > -               input_set_abs_params(dev, ABS_TOOL_WIDTH, 0, 15, 0, 0);
> > +       if (SYN_CAP_PALMDETECT(priv->capabilities)) {
> > +               if (SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c))
> > +                       input_set_abs_params(dev,
> > +                                            ABS_MT_TOUCH_MAJOR, 4, 15, 0, 0);
> > +               else
> > +                       input_set_abs_params(dev, ABS_TOOL_WIDTH, 0, 15, 0, 0);
> > +       }
> 
> Again, I'd prefer having Peter's point of view here.
> 
> If we really need both, we will need to change input-mt to also
> emulate ABS_TOOL_WIDTH from ABS_MT_TOUCH_MAJOR like we do between
> ABS_MT_POSITION_X|Y and ABS_X|Y.
> 
> Cheers,
> Benjamin
> 
> >
> >         __set_bit(BTN_TOUCH, dev->keybit);
> >         __set_bit(BTN_TOOL_FINGER, dev->keybit);
> > --
> > 2.1.4
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-input" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2015-01-07  6:34 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-27 11:31 [PATCH 0/2] input: synaptics - make image sensors report finger widths Gabriele Mazzotta
2014-12-27 11:31 ` [PATCH 1/2] input: synaptics - make image sensors report ABS_MT_TOUCH_MAJOR Gabriele Mazzotta
2015-01-05 19:24   ` Benjamin Tissoires
2015-01-05 20:13     ` Gabriele Mazzotta
2015-01-05 20:18       ` Gabriele Mazzotta
2015-01-05 22:00     ` Gabriele Mazzotta
2015-01-05 22:04       ` Benjamin Tissoires
2015-01-07  6:10         ` Peter Hutterer
2015-01-07  7:49         ` Dmitry Torokhov
2015-01-07  6:02     ` Peter Hutterer [this message]
2014-12-27 11:31 ` [PATCH 2/2] input: synaptics - fix width calculation on image sensors Gabriele Mazzotta
2015-01-05 18:25   ` Benjamin Tissoires
2015-01-05 18:37     ` Gabriele Mazzotta
2015-01-05 18:42       ` Benjamin Tissoires
2015-01-05 19:04         ` Dmitry Torokhov
2015-01-05 19:07           ` Benjamin Tissoires
2015-01-05 19:15           ` Gabriele Mazzotta
2015-01-05 19:26             ` Benjamin Tissoires

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150107060229.GA17069@jelly.redhat.com \
    --to=peter.hutterer@who-t.net \
    --cc=benjamin.tissoires@gmail.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=gabriele.mzt@gmail.com \
    --cc=hdegoede@redhat.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rydberg@euromail.se \
    --cc=silverhammermba@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.