All of lore.kernel.org
 help / color / mirror / Atom feed
From: "J. Bruce Fields" <bfields@fieldses.org>
To: Jeff Layton <jeff.layton@primarydata.com>
Cc: linux-fsdevel@vger.kernel.org, linux-kernel@vger.kernel.org,
	Linus Torvalds <torvalds@linux-foundation.org>,
	"Kirill A. Shutemov" <kirill@shutemov.name>,
	Christoph Hellwig <hch@lst.de>,
	Dave Chinner <david@fromorbit.com>,
	Sasha Levin <sasha.levin@oracle.com>
Subject: Re: [PATCH 2/4] locks: remove conditional lock release in middle of flock_lock_file
Date: Tue, 17 Feb 2015 14:11:36 -0500	[thread overview]
Message-ID: <20150217191136.GD27900@fieldses.org> (raw)
In-Reply-To: <20150217125649.5015cfe4@tlielax.poochiereds.net>

On Tue, Feb 17, 2015 at 12:56:49PM -0500, Jeff Layton wrote:
> On Tue, 17 Feb 2015 12:10:17 -0500
> "J. Bruce Fields" <bfields@fieldses.org> wrote:
> 
> > On Tue, Feb 17, 2015 at 07:46:28AM -0500, Jeff Layton wrote:
> > > As Linus pointed out:
> > > 
> > >     Say we have an existing flock, and now do a new one that conflicts. I
> > >     see what looks like three separate bugs.
> > > 
> > >      - We go through the first loop, find a lock of another type, and
> > >     delete it in preparation for replacing it
> > > 
> > >      - we *drop* the lock context spinlock.
> > > 
> > >      - BUG #1? So now there is no lock at all, and somebody can come in
> > >     and see that unlocked state. Is that really valid?
> > > 
> > >      - another thread comes in while the first thread dropped the lock
> > >     context lock, and wants to add its own lock. It doesn't see the
> > >     deleted or pending locks, so it just adds it
> > > 
> > >      - the first thread gets the context spinlock again, and adds the lock
> > >     that replaced the original
> > > 
> > >      - BUG #2? So now there are *two* locks on the thing, and the next
> > >     time you do an unlock (or when you close the file), it will only
> > >     remove/replace the first one.
> > > 
> > > ...remove the "drop the spinlock" code in the middle of this function as
> > > it has always been suspicious.
> > 
> > Looking back through a historical git repo, purely out of curiosity--the
> > cond_resched was previously a yield, and then I *think* bug #2 was
> > introduced in 2002 by a "[PATCH] fs/locks.c: more cleanup".  Before that
> > it retried the first loop after the yield.
> > 
> > Before that the yield was in locks_wake_up_blocks, removed by:
> > 
> > 	commit 7962ad19e6300531784722c16849837864304d84
> > 	Author: Matthew Wilcox <willy@debian.org>
> > 	Date:   Sat Jun 8 02:09:24 2002 -0700
> > 
> > 	[PATCH] fs/locks.c: Only yield once for flocks
> > 	    
> > 	This patch removes the annoying and confusing `wait' argument
> > 	from many places.  The only change in behaviour is that we now
> > 	yield once when unblocking other BSD-style flocks instead of
> > 	once for each lock.
> > 			    
> > 	This slightly improves the semantics for userspace.  Before,
> > 	when we had two tasks waiting on a lock, the first one would
> > 	receive the lock.  Now, the one with the highest priority
> > 	receives the lock.
> > 
> > So this really was intended to guarantee other waiters the lock before
> > allowing an upgrade.  Could that actually have worked?
> > 
> > The non-atomic behavior is documented in flock(2), which says it's
> > "original BSD behavior".
> > 
> > A comment at the top of locks.c says this is to avoid deadlock.  Hm, so,
> > are we introducing a deadlock?:
> > 
> > 	1. Two processes both get shared lock on different filps.
> > 	2. Both request exclusive lock.
> > 
> > Now they're stuck, whereas previously they might have recovered?
> > 
> > --b.
> > 
> 
> 
> Yes, I see that now. It might be best to preserve the existing behavior
> for that reason then. I'd rather not introduce any behavioral changes in this
> set if we can help it, particularly if there are userland apps that
> might rely on it.
> 
> It may be best then to keep this patch, but drop patch #3.

Unfortunately it's this patch that I'm worried about.

Also these patches are introducing some failure in my locking tests
(probably unrelated, I doubt I ever wrote a test for this case).  I'll
investigate.

--b.

> That should
> be enough to ensure that we don't end up with two different locks on
> the same file description, which is clearly a bug.
> 
> It might also not hurt to follow HCH's earlier advice and make
> locks_remove_flock just iterate over the list and just unconditionally
> delete any lock that in the case where the ->flock operation isn't set.
> 
> In principle we shouldn't need that once apply patch #2, but it would
> probably be simpler than dealing with flock_lock_file in that case.
> 
> > > 
> > > Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
> > > Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
> > > ---
> > >  fs/locks.c | 10 ----------
> > >  1 file changed, 10 deletions(-)
> > > 
> > > diff --git a/fs/locks.c b/fs/locks.c
> > > index 7998f670812c..00c105f499a2 100644
> > > --- a/fs/locks.c
> > > +++ b/fs/locks.c
> > > @@ -901,16 +901,6 @@ static int flock_lock_file(struct file *filp, struct file_lock *request)
> > >  		goto out;
> > >  	}
> > >  
> > > -	/*
> > > -	 * If a higher-priority process was blocked on the old file lock,
> > > -	 * give it the opportunity to lock the file.
> > > -	 */
> > > -	if (found) {
> > > -		spin_unlock(&ctx->flc_lock);
> > > -		cond_resched();
> > > -		spin_lock(&ctx->flc_lock);
> > > -	}
> > > -
> > >  find_conflict:
> > >  	list_for_each_entry(fl, &ctx->flc_flock, fl_list) {
> > >  		if (!flock_locks_conflict(request, fl))
> > > -- 
> > > 2.1.0
> 
> 
> -- 
> Jeff Layton <jeff.layton@primarydata.com>

  reply	other threads:[~2015-02-17 19:11 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-17 12:46 [PATCH 0/4] locks: flock and lease related bugfixes, and remove i_flctx counters Jeff Layton
2015-02-17 12:46 ` [PATCH 1/4] Revert "locks: keep a count of locks on the flctx lists" Jeff Layton
2015-02-17 12:46 ` [PATCH 2/4] locks: remove conditional lock release in middle of flock_lock_file Jeff Layton
2015-02-17 17:10   ` J. Bruce Fields
2015-02-17 17:56     ` Jeff Layton
2015-02-17 19:11       ` J. Bruce Fields [this message]
2015-02-17 22:21         ` J. Bruce Fields
2015-02-17 22:29           ` Jeff Layton
2015-02-17 12:46 ` [PATCH 3/4] locks: when upgrading, don't remove old flock lock until replacing with new one Jeff Layton
2015-02-17 12:46 ` [PATCH 4/4] locks: only remove leases associated with the file being closed Jeff Layton
2015-02-17 19:55 ` [PATCH 0/4] locks: flock and lease related bugfixes, and remove i_flctx counters Linus Torvalds
2015-02-17 20:20   ` Linus Torvalds
2015-02-17 20:20   ` Al Viro
2015-02-17 21:10     ` Jeff Layton

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150217191136.GD27900@fieldses.org \
    --to=bfields@fieldses.org \
    --cc=david@fromorbit.com \
    --cc=hch@lst.de \
    --cc=jeff.layton@primarydata.com \
    --cc=kirill@shutemov.name \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sasha.levin@oracle.com \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.