From: Alexandre Bailon <abailon-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
To: b-liu-l0cyMroinI0@public.gmane.org
Cc: nsekhar-l0cyMroinI0@public.gmane.org,
khilman-rdvid1DuHRBWk0Htik3J/w@public.gmane.org,
ptitiano-rdvid1DuHRBWk0Htik3J/w@public.gmane.org,
tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org,
linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org,
Alexandre Bailon
<abailon-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
Subject: [PATCH v4 3/5] usb: musb: Add support of CPPI 4.1 DMA controller to DA8xx
Date: Tue, 24 Jan 2017 11:11:47 +0100 [thread overview]
Message-ID: <20170124101149.14920-4-abailon@baylibre.com> (raw)
In-Reply-To: <20170124101149.14920-1-abailon-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
Currently, only the PIO mode is supported.
This add support of CPPI 4.1 to DA8xx.
As the In DA8xx the CPPI 4.1 DMA is a part of the USB.
Create the CPPI 4.1 device as a child of USB.
Signed-off-by: Alexandre Bailon <abailon-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
---
drivers/usb/musb/Kconfig | 4 ++--
drivers/usb/musb/da8xx.c | 35 ++++++++++++++++++++++++++++++++++-
2 files changed, 36 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 72a2a50..5506a9c 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -160,8 +160,8 @@ config USB_TI_CPPI_DMA
Enable DMA transfers when TI CPPI DMA is available.
config USB_TI_CPPI41_DMA
- bool 'TI CPPI 4.1 (AM335x)'
- depends on ARCH_OMAP && DMADEVICES
+ bool 'TI CPPI 4.1'
+ depends on (ARCH_OMAP || ARCH_DAVINCI_DA8XX) && DMADEVICES
select TI_CPPI41
config USB_TUSB_OMAP_DMA
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index cd3d763..d279438 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -33,6 +33,7 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/of_platform.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
@@ -457,12 +458,40 @@ static inline u8 get_vbus_power(struct device *dev)
return current_uA / 1000 / 2;
}
+#ifdef CONFIG_USB_TI_CPPI41_DMA
+static void da8xx_dma_controller_callback(struct dma_controller *c)
+{
+ struct musb *musb = c->musb;
+ void __iomem *reg_base = musb->ctrl_base;
+
+ musb_writel(reg_base, DA8XX_USB_END_OF_INTR_REG, 0);
+}
+
+static struct dma_controller *
+da8xx_dma_controller_create(struct musb *musb, void __iomem *base)
+{
+ struct dma_controller *controller;
+
+ controller = cppi41_dma_controller_create(musb, base);
+ if (IS_ERR_OR_NULL(controller))
+ return controller;
+
+ controller->dma_callback = da8xx_dma_controller_callback;
+
+ return controller;
+}
+#endif
+
static const struct musb_platform_ops da8xx_ops = {
- .quirks = MUSB_INDEXED_EP,
+ .quirks = MUSB_INDEXED_EP | MUSB_DMA_CPPI41,
.init = da8xx_musb_init,
.exit = da8xx_musb_exit,
.fifo_mode = 2,
+#ifdef CONFIG_USB_TI_CPPI41_DMA
+ .dma_init = da8xx_dma_controller_create,
+ .dma_exit = cppi41_dma_controller_destroy,
+#endif
.enable = da8xx_musb_enable,
.disable = da8xx_musb_disable,
@@ -534,6 +563,10 @@ static int da8xx_probe(struct platform_device *pdev)
}
platform_set_drvdata(pdev, glue);
+ ret = of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
+ if (ret)
+ return ret;
+
memset(musb_resources, 0x00, sizeof(*musb_resources) *
ARRAY_SIZE(musb_resources));
--
2.10.2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-01-24 10:11 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-24 10:11 [PATCH v4 0/5] usb: musb: da8xx: Add DMA support Alexandre Bailon
[not found] ` <20170124101149.14920-1-abailon-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
2017-01-24 10:11 ` [PATCH v4 1/5] usb: musb: da8xx: Remove CPPI 3.0 quirk and methods Alexandre Bailon
2017-01-24 10:11 ` [PATCH v4 2/5] usb: musb: Use shared irq Alexandre Bailon
2017-01-24 10:11 ` Alexandre Bailon [this message]
2017-01-24 10:11 ` [PATCH v4 4/5] usb: musb: musb_cppi41: Workaround DMA stall issue during teardown Alexandre Bailon
[not found] ` <20170124101149.14920-5-abailon-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
2017-01-24 12:22 ` Sergei Shtylyov
2017-01-24 10:11 ` [PATCH v4 5/5] usb: musb: da8xx: Add a primary support of PM runtime Alexandre Bailon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170124101149.14920-4-abailon@baylibre.com \
--to=abailon-rdvid1duhrbwk0htik3j/w@public.gmane.org \
--cc=b-liu-l0cyMroinI0@public.gmane.org \
--cc=khilman-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=nsekhar-l0cyMroinI0@public.gmane.org \
--cc=ptitiano-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
--cc=sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org \
--cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.