All of lore.kernel.org
 help / color / mirror / Atom feed
From: Gustavo Padovan <gustavo@padovan.org>
To: dri-devel@lists.freedesktop.org
Cc: Gustavo Padovan <gustavo.padovan@collabora.com>,
	intel-gfx@lists.freedesktop.org
Subject: [PATCH v2 6/6] drm/vc4: update cursors asynchronously through atomic
Date: Thu, 15 Jun 2017 11:33:05 +0900	[thread overview]
Message-ID: <20170615023305.17410-7-gustavo@padovan.org> (raw)
In-Reply-To: <20170615023305.17410-1-gustavo@padovan.org>

From: Gustavo Padovan <gustavo.padovan@collabora.com>

Add support for async updates of cursors by using the new atomic
interface for that. Basically what this commit does is do what
vc4_update_plane() did but through atomic.

v4: add drm_atomic_helper_async() commit (Eric Anholt)

v3: move size checks back to drivers (Ville Syrjälä)

v2: move fb setting to core and use new state (Eric Anholt)

Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
---

Only build tested!

 drivers/gpu/drm/vc4/vc4_kms.c   | 20 +++++++++
 drivers/gpu/drm/vc4/vc4_plane.c | 99 +++++++++++++++--------------------------
 2 files changed, 55 insertions(+), 64 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_kms.c b/drivers/gpu/drm/vc4/vc4_kms.c
index 928d191..08ff231 100644
--- a/drivers/gpu/drm/vc4/vc4_kms.c
+++ b/drivers/gpu/drm/vc4/vc4_kms.c
@@ -113,6 +113,26 @@ static int vc4_atomic_commit(struct drm_device *dev,
 	struct drm_plane *plane;
 	struct drm_plane_state *new_state;
 
+	if (state->async_update) {
+		ret = down_interruptible(&vc4->async_modeset);
+		if (ret)
+			return ret;
+
+		ret = drm_atomic_helper_prepare_planes(dev, state);
+		if (ret) {
+			up(&vc4->async_modeset);
+			return ret;
+		}
+
+		drm_atomic_helper_async_commit(dev, state);
+
+		drm_atomic_helper_cleanup_planes(dev, state);
+
+		up(&vc4->async_modeset);
+
+		return 0;
+	}
+
 	c = commit_init(state);
 	if (!c)
 		return -ENOMEM;
diff --git a/drivers/gpu/drm/vc4/vc4_plane.c b/drivers/gpu/drm/vc4/vc4_plane.c
index da18dec..44d3a01 100644
--- a/drivers/gpu/drm/vc4/vc4_plane.c
+++ b/drivers/gpu/drm/vc4/vc4_plane.c
@@ -736,70 +736,38 @@ void vc4_plane_async_set_fb(struct drm_plane *plane, struct drm_framebuffer *fb)
 	vc4_state->dlist[vc4_state->ptr0_offset] = addr;
 }
 
-static const struct drm_plane_helper_funcs vc4_plane_helper_funcs = {
-	.atomic_check = vc4_plane_atomic_check,
-	.atomic_update = vc4_plane_atomic_update,
-};
-
-static void vc4_plane_destroy(struct drm_plane *plane)
-{
-	drm_plane_helper_disable(plane);
-	drm_plane_cleanup(plane);
-}
-
-/* Implements immediate (non-vblank-synced) updates of the cursor
- * position, or falls back to the atomic helper otherwise.
- */
-static int
-vc4_update_plane(struct drm_plane *plane,
-		 struct drm_crtc *crtc,
-		 struct drm_framebuffer *fb,
-		 int crtc_x, int crtc_y,
-		 unsigned int crtc_w, unsigned int crtc_h,
-		 uint32_t src_x, uint32_t src_y,
-		 uint32_t src_w, uint32_t src_h,
-		 struct drm_modeset_acquire_ctx *ctx)
+static int vc4_plane_atomic_async_check(struct drm_plane *plane,
+					struct drm_plane_state *state)
 {
-	struct drm_plane_state *plane_state;
-	struct vc4_plane_state *vc4_state;
-
-	if (plane != crtc->cursor)
-		goto out;
-
-	plane_state = plane->state;
-	vc4_state = to_vc4_plane_state(plane_state);
+	if (plane != state->crtc->cursor)
+		return -EINVAL;
 
-	if (!plane_state)
-		goto out;
+	if (!plane->state)
+		return -EINVAL;
 
 	/* No configuring new scaling in the fast path. */
-	if (crtc_w != plane_state->crtc_w ||
-	    crtc_h != plane_state->crtc_h ||
-	    src_w != plane_state->src_w ||
-	    src_h != plane_state->src_h) {
-		goto out;
+	if (state->crtc_w != plane->state->crtc_w ||
+	    state->crtc_h != plane->state->crtc_h ||
+	    state->src_w != plane->state->src_w ||
+	    state->src_h != plane->state->src_h) {
+		return -EINVAL;
 	}
 
-	if (fb != plane_state->fb) {
-		drm_atomic_set_fb_for_plane(plane->state, fb);
-		vc4_plane_async_set_fb(plane, fb);
-	}
+	return 0;
+}
 
-	/* Set the cursor's position on the screen.  This is the
-	 * expected change from the drm_mode_cursor_universal()
-	 * helper.
-	 */
-	plane_state->crtc_x = crtc_x;
-	plane_state->crtc_y = crtc_y;
+static void vc4_plane_atomic_async_update(struct drm_plane *plane,
+					  struct drm_plane_state *new_state)
+{
+	struct vc4_plane_state *vc4_state = to_vc4_plane_state(plane->state);
 
-	/* Allow changing the start position within the cursor BO, if
-	 * that matters.
-	 */
-	plane_state->src_x = src_x;
-	plane_state->src_y = src_y;
+	plane->state->src_x = new_state->src_x;
+	plane->state->src_y = new_state->src_y;
+	plane->state->crtc_x = new_state->crtc_x;
+	plane->state->crtc_y = new_state->crtc_y;
 
-	/* Update the display list based on the new crtc_x/y. */
-	vc4_plane_atomic_check(plane, plane_state);
+	if (plane->state->fb != new_state->fb)
+		vc4_plane_async_set_fb(plane, new_state->fb);
 
 	/* Note that we can't just call vc4_plane_write_dlist()
 	 * because that would smash the context data that the HVS is
@@ -811,20 +779,23 @@ vc4_update_plane(struct drm_plane *plane,
 	       &vc4_state->hw_dlist[vc4_state->pos2_offset]);
 	writel(vc4_state->dlist[vc4_state->ptr0_offset],
 	       &vc4_state->hw_dlist[vc4_state->ptr0_offset]);
+}
 
-	return 0;
+static const struct drm_plane_helper_funcs vc4_plane_helper_funcs = {
+	.atomic_check = vc4_plane_atomic_check,
+	.atomic_update = vc4_plane_atomic_update,
+	.atomic_async_check = vc4_plane_atomic_async_check,
+	.atomic_async_update = vc4_plane_atomic_async_update,
+};
 
-out:
-	return drm_atomic_helper_update_plane(plane, crtc, fb,
-					      crtc_x, crtc_y,
-					      crtc_w, crtc_h,
-					      src_x, src_y,
-					      src_w, src_h,
-					      ctx);
+static void vc4_plane_destroy(struct drm_plane *plane)
+{
+	drm_plane_helper_disable(plane);
+	drm_plane_cleanup(plane);
 }
 
 static const struct drm_plane_funcs vc4_plane_funcs = {
-	.update_plane = vc4_update_plane,
+	.update_plane = drm_atomic_helper_update_plane,
 	.disable_plane = drm_atomic_helper_disable_plane,
 	.destroy = vc4_plane_destroy,
 	.set_property = NULL,
-- 
2.9.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2017-06-15  2:33 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-15  2:32 [PATCH v2 0/6] drm: add asynchrounous plane update Gustavo Padovan
2017-06-15  2:33 ` [PATCH v2 1/6] drm/atomic: initial support for asynchronous " Gustavo Padovan
2017-06-15  2:33 ` [PATCH v2 2/6] drm/i915: update cursors asynchronously through atomic Gustavo Padovan
2017-06-15  2:33 ` [PATCH v2 3/6] drm/i915: remove intel_cursor_plane_funcs Gustavo Padovan
2017-06-15  2:33 ` [PATCH v2 4/6] drm/msm: update cursors asynchronously through atomic Gustavo Padovan
2017-06-15  2:33 ` [PATCH v2 5/6] drm/msm: remove mdp5_cursor_plane_funcs Gustavo Padovan
2017-06-15  2:33 ` Gustavo Padovan [this message]
2017-06-15 23:28   ` [PATCH v2 6/6 squash] drm/vc4: Fixup for the drm core async changes Eric Anholt
2017-06-16  5:32     ` [PATCH] drm/vc4: update cursors asynchronously through atomic Gustavo Padovan
2017-06-15  2:38 ` ✗ Fi.CI.BAT: failure for drm: add asynchrounous plane update Patchwork
2017-06-15 23:30 ` ✗ Fi.CI.BAT: failure for drm: add asynchrounous plane update (rev2) Patchwork
2017-06-16  5:34 ` ✗ Fi.CI.BAT: failure for drm: add asynchrounous plane update (rev3) Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170615023305.17410-7-gustavo@padovan.org \
    --to=gustavo@padovan.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=gustavo.padovan@collabora.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.