All of lore.kernel.org
 help / color / mirror / Atom feed
From: Brian Foster <bfoster@redhat.com>
To: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: eguan@redhat.com, linux-xfs@vger.kernel.org, fstests@vger.kernel.org
Subject: Re: [PATCH 11/8] common/inject: refactor helpers to use new errortag interface
Date: Wed, 5 Jul 2017 08:16:11 -0400	[thread overview]
Message-ID: <20170705121610.GA51285@bfoster.bfoster> (raw)
In-Reply-To: <20170630041308.GF5871@birch.djwong.org>

On Thu, Jun 29, 2017 at 09:13:08PM -0700, Darrick J. Wong wrote:
> Refactor the XFS error injection helpers to use the new errortag
> interface to configure error injection.  If that isn't present, fall
> back either to the xfs_io/ioctl based injection or the older sysfs
> knobs.  Refactor existing testcases to use the new helpers.
> 
> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
> ---
>  common/inject |   62 +++++++++++++++++++++++++++++++++++++++++++++++++++++++--
>  tests/xfs/051 |    7 ++++--
>  tests/xfs/141 |    5 +++--
>  tests/xfs/196 |   17 ++++++----------
>  4 files changed, 73 insertions(+), 18 deletions(-)
> 
> diff --git a/common/inject b/common/inject
> index 8ecc290..1f12a2b 100644
> --- a/common/inject
> +++ b/common/inject
> @@ -35,10 +35,50 @@ _require_error_injection()
>  	esac
>  }
>  
> +# Find a given xfs mount's errortag injection knob in sysfs
> +_find_xfs_errortag_knob()
> +{
> +	dev="$1"
> +	knob="$2"
> +	shortdev="$(_short_dev "${dev}")"
> +	tagfile="/sys/fs/xfs/${shortdev}/errortag/${knob}"
> +
> +	# Some of the new sysfs errortag knobs were previously available via
> +	# another sysfs path.
> +	case "${knob}" in
> +	"log_bad_crc")
> +		if [ ! -w "${tagfile}" ]; then
> +			tagfile="/sys/fs/xfs/${shortdev}/log/log_badcrc_factor"
> +		fi
> +		;;
> +	"drop_writes")
> +		if [ ! -w "${tagfile}" ]; then
> +			tagfile="/sys/fs/xfs/${shortdev}/drop_writes"
> +		fi
> +		if [ ! -w "${tagfile}" ]; then
> +			tagfile="/sys/fs/xfs/${shortdev}/fail_writes"
> +		fi
> +		;;
> +	"log_recovery_delay"|"bug_on_assert")

What's the purpose for having these here? I'm not sure that either is
really related to error injection (which I find a little confusing
despite that this code can be reused to generically send a value to a
sysfs knob).

> +		# These apply to all xfs filesystems
> +		tagfile="/sys/fs/xfs/debug/${knob}"
> +		;;
> +	*)
> +		;;
> +	esac
> +
> +	echo "${tagfile}"
> +}
> +
>  # Requires that xfs_io inject command knows about this error type
>  _require_xfs_io_error_injection()
>  {
>  	type="$1"
> +
> +	# Can we find the error injection knobs via the new errortag
> +	# configuration mechanism?
> +	test -w "$(_find_xfs_errortag_knob "${TEST_DEV}" "${type}")" && return
> +
>  	_require_error_injection
>  
>  	# NOTE: We can't actually test error injection here because xfs
...
> diff --git a/tests/xfs/196 b/tests/xfs/196
> index e9b0649..5afc343 100755
> --- a/tests/xfs/196
> +++ b/tests/xfs/196
...
> @@ -53,13 +54,7 @@ rm -f $seqres.full
>  _supported_fs generic
>  _supported_os Linux
>  _require_scratch
> -
> -DROP_WRITES="drop_writes"
> -# replace "drop_writes" with "fail_writes" for old kernel
> -if [ -f /sys/fs/xfs/$(_short_dev $TEST_DEV)/fail_writes ];then
> -	DROP_WRITES="fail_writes"
> -fi
> -_require_xfs_sysfs $(_short_dev $TEST_DEV)/${DROP_WRITES}
> +_require_xfs_io_error_injection "drop_writes"
>  
>  _scratch_mkfs >/dev/null 2>&1
>  _scratch_mount
> @@ -72,7 +67,7 @@ bytes=$((64 * 1024))
>  $XFS_IO_PROG -f -c "pwrite 0 $bytes" $file >> $seqres.full 2>&1
>  
>  # Enable write drops. All buffered writes are dropped from this point on.
> -echo 1 > /sys/fs/xfs/$sdev/$DROP_WRITES
> +_scratch_inject_error "drop_writes"

I'd prefer to keep the parameter in this case (and below) just as a
defense against future changes in the default value. Otherwise the rest
looks pretty good.

Brian

>  
>  # Write every other 4k range to split the larger delalloc extent into many more
>  # smaller extents. Use pwrite because with write failures enabled, all
> @@ -89,7 +84,7 @@ for i in $(seq 4096 8192 $endoff); do
>  	$XFS_IO_PROG -c "pwrite $i 4k" $file >> $seqres.full 2>&1
>  done
>  
> -echo 0 > /sys/fs/xfs/$sdev/$DROP_WRITES
> +_scratch_inject_error "drop_writes" 0
>  
>  _scratch_cycle_mount
>  $XFS_IO_PROG -c 'bmap -vp' $file | _filter_bmap
> @@ -104,9 +99,9 @@ for offset in $(seq 0 100 500); do
>  	$XFS_IO_PROG -fc "pwrite ${offset}m 100m" $file >> $seqres.full 2>&1
>  
>  	punchoffset=$((offset + 75))
> -	echo 1 > /sys/fs/xfs/$sdev/$DROP_WRITES
> +	_scratch_inject_error "drop_writes"
>  	$XFS_IO_PROG -c "pwrite ${punchoffset}m 4k" $file >> $seqres.full 2>&1
> -	echo 0 > /sys/fs/xfs/$sdev/$DROP_WRITES
> +	_scratch_inject_error "drop_writes" 0
>  done
>  
>  echo "Silence is golden."
> --
> To unsubscribe from this list: send the line "unsubscribe fstests" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2017-07-05 12:16 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-21 21:57 [PATCH 0/8] miscellaneous tests Darrick J. Wong
2017-06-21 21:57 ` [PATCH 1/8] ext4: fsmap tests Darrick J. Wong
2017-06-23  7:41   ` Eryu Guan
2017-06-23 15:35     ` Darrick J. Wong
2017-06-21 21:57 ` [PATCH 2/8] xfs/274: flip shared bits to reflect xfsprogs usage Darrick J. Wong
2017-06-21 21:57 ` [PATCH 3/8] xfs: don't allow realtime swap files Darrick J. Wong
2017-06-21 21:57 ` [PATCH 4/8] xfs/040: use compare-libxfs in xfsprogs Darrick J. Wong
2017-06-21 21:57 ` [PATCH 5/8] reflink: test unlinking a huge extent with a lot of refcount adjustments Darrick J. Wong
2017-06-29  9:36   ` Eryu Guan
2017-06-29 16:07     ` Darrick J. Wong
2017-06-29 17:19       ` Eryu Guan
2017-06-21 21:57 ` [PATCH 6/8] xfs: test that we can SEEK_HOLE/DATA data and holes that are in the CoW fork only Darrick J. Wong
2017-06-21 21:58 ` [PATCH 7/8] xfs: test freeze/rmap repair race Darrick J. Wong
2017-06-29  9:47   ` Eryu Guan
2017-06-29 17:17     ` Darrick J. Wong
2017-06-21 21:58 ` [PATCH 8/8] xfs: scrub while appending to a file Darrick J. Wong
2017-06-22  6:26 ` [PATCH 9/8] common/populate: remember multi-device configurations Darrick J. Wong
2017-06-23  7:49   ` Eryu Guan
2017-06-23 15:34     ` Darrick J. Wong
2017-06-30  4:12   ` [PATCH v2 " Darrick J. Wong
2017-06-23  7:59 ` [PATCH 0/8] miscellaneous tests Eryu Guan
2017-06-30  4:12 ` [PATCH 10/8] common/rc: test that the xfs_io scrub/repair commands actually work Darrick J. Wong
2017-06-30  4:13 ` [PATCH 11/8] common/inject: refactor helpers to use new errortag interface Darrick J. Wong
2017-07-05 12:16   ` Brian Foster [this message]
2017-07-05 16:29     ` Darrick J. Wong
2017-07-05 16:45       ` Brian Foster
2017-07-05 21:05         ` Darrick J. Wong
2017-07-06 10:07           ` Brian Foster
2017-06-30  4:13 ` [PATCH 12/8] ext4: don't online scrub ever Darrick J. Wong
2017-06-30  4:22   ` Eryu Guan
2017-06-30  4:26     ` Darrick J. Wong
2017-06-30  4:33       ` Eryu Guan
2017-06-30  4:58   ` [PATCH v2 " Darrick J. Wong
2017-06-30 12:32     ` Eryu Guan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170705121610.GA51285@bfoster.bfoster \
    --to=bfoster@redhat.com \
    --cc=darrick.wong@oracle.com \
    --cc=eguan@redhat.com \
    --cc=fstests@vger.kernel.org \
    --cc=linux-xfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.