All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chris Packham <chris.packham-6g8wRflRTwXFdCa3tKVlE6U/zSkkHjvu@public.gmane.org>
To: andy.shevchenko-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Cc: linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [RFC PATCH v2 03/12] spi: spi-ep93xx: absorb the interrupt enable/disable helpers
Date: Fri, 28 Jul 2017 10:03:13 +1200	[thread overview]
Message-ID: <20170727220322.26654-4-chris.packham@alliedtelesis.co.nz> (raw)
In-Reply-To: <20170727220322.26654-1-chris.packham-6g8wRflRTwXFdCa3tKVlE6U/zSkkHjvu@public.gmane.org>

From: H Hartley Sweeten <hsweeten-3FF4nKcrg1dE2c76skzGb0EOCMrvLtNR@public.gmane.org>

These are each only called once. Just absorb them into the callers.

Signed-off-by: H Hartley Sweeten <hsweeten-3FF4nKcrg1dE2c76skzGb0EOCMrvLtNR@public.gmane.org>
---
 drivers/spi/spi-ep93xx.c | 32 ++++++++++++--------------------
 1 file changed, 12 insertions(+), 20 deletions(-)

diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c
index dd179f3fbeeb..e8f454b55b69 100644
--- a/drivers/spi/spi-ep93xx.c
+++ b/drivers/spi/spi-ep93xx.c
@@ -111,24 +111,6 @@ struct ep93xx_spi {
 /* converts bits per word to CR0.DSS value */
 #define bits_per_word_to_dss(bpw)	((bpw) - 1)
 
-static void ep93xx_spi_enable_interrupts(const struct ep93xx_spi *espi)
-{
-	unsigned int val;
-
-	val = readl(espi->mmio + SSPCR1);
-	val |= (SSPCR1_RORIE | SSPCR1_TIE | SSPCR1_RIE);
-	writel(val, espi->mmio + SSPCR1);
-}
-
-static void ep93xx_spi_disable_interrupts(const struct ep93xx_spi *espi)
-{
-	unsigned int val;
-
-	val = readl(espi->mmio + SSPCR1);
-	val &= ~(SSPCR1_RORIE | SSPCR1_TIE | SSPCR1_RIE);
-	writel(val, espi->mmio + SSPCR1);
-}
-
 /**
  * ep93xx_spi_calc_divisors() - calculates SPI clock divisors
  * @espi: ep93xx SPI controller struct
@@ -282,7 +264,12 @@ static void ep93xx_spi_pio_transfer(struct ep93xx_spi *espi)
 	 * FIFO, enable interrupts, and wait for the transfer to complete.
 	 */
 	if (ep93xx_spi_read_write(espi)) {
-		ep93xx_spi_enable_interrupts(espi);
+		unsigned int val;
+
+		val = readl(espi->mmio + SSPCR1);
+		val |= (SSPCR1_RORIE | SSPCR1_TIE | SSPCR1_RIE);
+		writel(val, espi->mmio + SSPCR1);
+
 		wait_for_completion(&espi->wait);
 	}
 }
@@ -604,6 +591,7 @@ static int ep93xx_spi_transfer_one_message(struct spi_master *master,
 static irqreturn_t ep93xx_spi_interrupt(int irq, void *dev_id)
 {
 	struct ep93xx_spi *espi = dev_id;
+	unsigned int val;
 
 	/*
 	 * If we got ROR (receive overrun) interrupt we know that something is
@@ -635,8 +623,12 @@ static irqreturn_t ep93xx_spi_interrupt(int irq, void *dev_id)
 	 * any case we disable interrupts and notify the worker to handle
 	 * any post-processing of the message.
 	 */
-	ep93xx_spi_disable_interrupts(espi);
+	val = readl(espi->mmio + SSPCR1);
+	val &= ~(SSPCR1_RORIE | SSPCR1_TIE | SSPCR1_RIE);
+	writel(val, espi->mmio + SSPCR1);
+
 	complete(&espi->wait);
+
 	return IRQ_HANDLED;
 }
 
-- 
2.13.0

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2017-07-27 22:03 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-07-27 22:03 [RFC PATCH v2 00/12] spi: moving to struct gpio_desc Chris Packham
     [not found] ` <20170727220322.26654-1-chris.packham-6g8wRflRTwXFdCa3tKVlE6U/zSkkHjvu@public.gmane.org>
2017-07-27 22:03   ` [RFC PATCH v2 01/12] spi: spi-ep93xx: use 32-bit read/write for all registers Chris Packham
2017-07-27 22:03   ` [RFC PATCH v2 02/12] spi: spi-ep93xx: add spi master prepare_transfer_hardware() Chris Packham
2017-07-27 22:03   ` Chris Packham [this message]
2017-07-27 22:03   ` [RFC PATCH v2 04/12] spi: spi-ep93xx: pass the spi_master pointer around Chris Packham
2017-07-27 22:03   ` [RFC PATCH v2 05/12] spi: spi-ep93xx: remove private data 'current_msg' Chris Packham
2017-07-27 22:03   ` [RFC PATCH v2 06/12] spi: spi-ep93xx: use the default master transfer queueing mechanism Chris Packham
2017-07-27 22:03   ` [RFC PATCH v2 07/12] spi: use gpio_desc instead of numeric gpio Chris Packham
2017-07-27 22:03   ` [RFC PATCH v2 08/12] ARM: ep93xx: add gpiod_lookup_table for spi chip-selects Chris Packham
2017-07-27 22:03   ` [RFC PATCH v2 09/12] ARM: imx: " Chris Packham
2017-07-27 22:03   ` [RFC PATCH v2 10/12] spi: core: convert spi_master to use gpio_desc Chris Packham
     [not found]     ` <20170727220322.26654-11-chris.packham-6g8wRflRTwXFdCa3tKVlE6U/zSkkHjvu@public.gmane.org>
2017-11-24 12:59       ` Geert Uytterhoeven
2017-07-27 22:03   ` [RFC PATCH v2 11/12] ARM: ep93xx: remove chipselect from ep93xx_spi_info Chris Packham
2017-07-27 22:03   ` [RFC PATCH v2 12/12] wip: convert struct spi_device to gpio_desc Chris Packham
     [not found]     ` <20170727220322.26654-13-chris.packham-6g8wRflRTwXFdCa3tKVlE6U/zSkkHjvu@public.gmane.org>
2017-11-24 13:03       ` Geert Uytterhoeven
2017-07-29 13:15   ` [RFC PATCH v2 00/12] spi: moving to struct gpio_desc Andy Shevchenko
     [not found]     ` <CAHp75VeVijF13AO=SqkxtAaiYhss92gwrtCZ2WnxkkKtvjVS3A-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-07-29 13:23       ` Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170727220322.26654-4-chris.packham@alliedtelesis.co.nz \
    --to=chris.packham-6g8wrflrtwxfdca3tkvle6u/zskkhjvu@public.gmane.org \
    --cc=andy.shevchenko-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.