From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Luca Weiss <luca@z3ntu.xyz>
Cc: linux-arm-msm@vger.kernel.org
Subject: Re: [PATCH v2 3/5] ARM: dts: msm8974-FP2: Add regulator nodes for FP2
Date: Wed, 11 Oct 2017 10:20:02 -0700 [thread overview]
Message-ID: <20171011172002.GT1165@minitux> (raw)
In-Reply-To: <20171011110229.24413-3-luca@z3ntu.xyz>
On Wed 11 Oct 04:02 PDT 2017, Luca Weiss wrote:
> The voltages are pulled from the vendor source tree.
>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Regards,
Bjorn
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
> arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts | 195 +++++++++++++++++++++++
> 1 file changed, 195 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
> index 9332c6e9c535..6dd553a61ae6 100644
> --- a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
> +++ b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
> @@ -49,6 +49,201 @@
> debounce-interval = <15>;
> };
> };
> +
> + smd {
> + rpm {
> + rpm_requests {
> + pm8841-regulators {
> + s1 {
> + regulator-min-microvolt = <675000>;
> + regulator-max-microvolt = <1050000>;
> + };
> +
> + s2 {
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1050000>;
> + };
> +
> + s3 {
> + regulator-min-microvolt = <1050000>;
> + regulator-max-microvolt = <1050000>;
> + };
> + };
> +
> + pm8941-regulators {
> + vdd_l1_l3-supply = <&pm8941_s1>;
> + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
> + vdd_l4_l11-supply = <&pm8941_s1>;
> + vdd_l5_l7-supply = <&pm8941_s2>;
> + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
> + vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
> + vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
> + vdd_l21-supply = <&vreg_boost>;
> +
> + s1 {
> + regulator-min-microvolt = <1300000>;
> + regulator-max-microvolt = <1300000>;
> +
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + s2 {
> + regulator-min-microvolt = <2150000>;
> + regulator-max-microvolt = <2150000>;
> +
> + regulator-boot-on;
> + };
> +
> + s3 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + l1 {
> + regulator-min-microvolt = <1225000>;
> + regulator-max-microvolt = <1225000>;
> +
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + l2 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + };
> +
> + l3 {
> + regulator-min-microvolt = <1225000>;
> + regulator-max-microvolt = <1225000>;
> + };
> +
> + l4 {
> + regulator-min-microvolt = <1225000>;
> + regulator-max-microvolt = <1225000>;
> + };
> +
> + l5 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + l6 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-boot-on;
> + };
> +
> + l7 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-boot-on;
> + };
> +
> + l8 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + l9 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2950000>;
> + };
> +
> + l10 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2950000>;
> + };
> +
> + l11 {
> + regulator-min-microvolt = <1225000>;
> + regulator-max-microvolt = <1350000>;
> + };
> +
> + l12 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + l13 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2950000>;
> +
> + regulator-boot-on;
> + };
> +
> + l14 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + l15 {
> + regulator-min-microvolt = <2050000>;
> + regulator-max-microvolt = <2050000>;
> + };
> +
> + l16 {
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <2700000>;
> + };
> +
> + l17 {
> + regulator-min-microvolt = <2850000>;
> + regulator-max-microvolt = <2850000>;
> + };
> +
> + l18 {
> + regulator-min-microvolt = <2850000>;
> + regulator-max-microvolt = <2850000>;
> + };
> +
> + l19 {
> + regulator-min-microvolt = <2900000>;
> + regulator-max-microvolt = <3350000>;
> + };
> +
> + l20 {
> + regulator-min-microvolt = <2950000>;
> + regulator-max-microvolt = <2950000>;
> +
> + regulator-boot-on;
> + };
> +
> + l21 {
> + regulator-min-microvolt = <2950000>;
> + regulator-max-microvolt = <2950000>;
> +
> + regulator-boot-on;
> + };
> +
> + l22 {
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + l23 {
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + };
> +
> + l24 {
> + regulator-min-microvolt = <3075000>;
> + regulator-max-microvolt = <3075000>;
> +
> + regulator-boot-on;
> + };
> + };
> + };
> + };
> + };
> };
>
> &soc {
> --
> 2.14.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-10-11 17:20 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-11 11:02 [PATCH v2 1/5] ARM: dts: qcom: Add initial DTS file for Fairphone 2 phone Luca Weiss
2017-10-11 11:02 ` [PATCH v2 2/5] ARM: dts: msm8974-FP2: Introduce gpio-keys nodes Luca Weiss
2017-10-11 17:12 ` Bjorn Andersson
2017-10-11 11:02 ` [PATCH v2 3/5] ARM: dts: msm8974-FP2: Add regulator nodes for FP2 Luca Weiss
2017-10-11 17:20 ` Bjorn Andersson [this message]
2017-10-11 11:02 ` [PATCH v2 4/5] ARM: dts: msm8974-FP2: Add sdhci1 node Luca Weiss
2017-10-11 17:20 ` Bjorn Andersson
2017-10-11 11:02 ` [PATCH v2 5/5] ARM: dts: msm8974-FP2: Add USB node Luca Weiss
2017-10-11 17:21 ` Bjorn Andersson
2017-10-11 17:11 ` [PATCH v2 1/5] ARM: dts: qcom: Add initial DTS file for Fairphone 2 phone Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171011172002.GT1165@minitux \
--to=bjorn.andersson@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=luca@z3ntu.xyz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.