All of lore.kernel.org
 help / color / mirror / Atom feed
From: Niklas Cassel <niklas.cassel@axis.com>
To: Niklas Cassel <niklass@axis.com>,
	Jesper Nilsson <jespern@axis.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-arm-kernel@axis.com, linux-pci@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v5 16/18] PCI: dwc: artpec6: Deassert the core before waiting for PHY
Date: Mon, 20 Nov 2017 14:32:19 +0100	[thread overview]
Message-ID: <20171120133222.27771-17-niklas.cassel@axis.com> (raw)
In-Reply-To: <20171120133222.27771-1-niklas.cassel@axis.com>

Waiting for the PHY while the core was held in reset worked for artpec6,
but for artpec7, in order to read the required registers, the core has to
be out of reset.
Refactor the code so we always wait for the PHY after the core has been
deasserted, since this works for both artpec6 and artpec7.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
---
 drivers/pci/dwc/pcie-artpec6.c | 45 +++++++++++++++++++++++++++---------------
 1 file changed, 29 insertions(+), 16 deletions(-)

diff --git a/drivers/pci/dwc/pcie-artpec6.c b/drivers/pci/dwc/pcie-artpec6.c
index 318a2bd0d97e..064c5a93ea80 100644
--- a/drivers/pci/dwc/pcie-artpec6.c
+++ b/drivers/pci/dwc/pcie-artpec6.c
@@ -125,11 +125,37 @@ static const struct dw_pcie_ops dw_pcie_ops = {
 	.stop_link = artpec6_pcie_stop_link,
 };
 
-static void artpec6_pcie_init_phy(struct artpec6_pcie *artpec6_pcie)
+static void artpec6_pcie_wait_for_phy(struct artpec6_pcie *artpec6_pcie)
 {
+	struct dw_pcie *pci = artpec6_pcie->pci;
+	struct device *dev = pci->dev;
 	u32 val;
 	unsigned int retries;
 
+	retries = 50;
+	do {
+		usleep_range(1000, 2000);
+		val = artpec6_pcie_readl(artpec6_pcie, NOCCFG);
+		retries--;
+	} while (retries &&
+		(val & (NOCCFG_POWER_PCIE_IDLEACK | NOCCFG_POWER_PCIE_IDLE)));
+	if (!retries)
+		dev_err(dev, "PCIe clock manager did not leave idle state\n");
+
+	retries = 50;
+	do {
+		usleep_range(1000, 2000);
+		val = readl(artpec6_pcie->phy_base + PHY_STATUS);
+		retries--;
+	} while (retries && !(val & PHY_COSPLLLOCK));
+	if (!retries)
+		dev_err(dev, "PHY PLL did not lock\n");
+}
+
+static void artpec6_pcie_init_phy(struct artpec6_pcie *artpec6_pcie)
+{
+	u32 val;
+
 	val = artpec6_pcie_readl(artpec6_pcie, PCIECFG);
 	val |=  PCIECFG_RISRCREN |	/* Receiver term. 50 Ohm */
 		PCIECFG_MODE_TX_DRV_EN |
@@ -154,21 +180,6 @@ static void artpec6_pcie_init_phy(struct artpec6_pcie *artpec6_pcie)
 	val = artpec6_pcie_readl(artpec6_pcie, NOCCFG);
 	val &= ~NOCCFG_POWER_PCIE_IDLEREQ;
 	artpec6_pcie_writel(artpec6_pcie, NOCCFG, val);
-
-	retries = 50;
-	do {
-		usleep_range(1000, 2000);
-		val = artpec6_pcie_readl(artpec6_pcie, NOCCFG);
-		retries--;
-	} while (retries &&
-		(val & (NOCCFG_POWER_PCIE_IDLEACK | NOCCFG_POWER_PCIE_IDLE)));
-
-	retries = 50;
-	do {
-		usleep_range(1000, 2000);
-		val = readl(artpec6_pcie->phy_base + PHY_STATUS);
-		retries--;
-	} while (retries && !(val & PHY_COSPLLLOCK));
 }
 
 static void artpec6_pcie_assert_core_reset(struct artpec6_pcie *artpec6_pcie)
@@ -207,6 +218,7 @@ static int artpec6_pcie_host_init(struct pcie_port *pp)
 	artpec6_pcie_assert_core_reset(artpec6_pcie);
 	artpec6_pcie_init_phy(artpec6_pcie);
 	artpec6_pcie_deassert_core_reset(artpec6_pcie);
+	artpec6_pcie_wait_for_phy(artpec6_pcie);
 	dw_pcie_setup_rc(pp);
 	artpec6_pcie_establish_link(pci);
 	dw_pcie_wait_for_link(pci);
@@ -274,6 +286,7 @@ static void artpec6_pcie_ep_init(struct dw_pcie_ep *ep)
 	artpec6_pcie_assert_core_reset(artpec6_pcie);
 	artpec6_pcie_init_phy(artpec6_pcie);
 	artpec6_pcie_deassert_core_reset(artpec6_pcie);
+	artpec6_pcie_wait_for_phy(artpec6_pcie);
 
 	for (bar = BAR_0; bar <= BAR_5; bar++)
 		dw_pcie_ep_reset_bar(pci, bar);
-- 
2.14.2

  parent reply	other threads:[~2017-11-20 13:34 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-11-20 13:32 [PATCH v5 00/18] dwc MSI fixes, ARTPEC-6 EP mode support, ARTPEC-7 SoC support Niklas Cassel
2017-11-20 13:32 ` [PATCH v5 01/18] PCI: dwc: Use the DMA-API to get the MSI address Niklas Cassel
2017-11-30 15:28   ` Lorenzo Pieralisi
2017-12-13 13:59     ` Niklas Cassel
2017-12-13 14:31       ` Lorenzo Pieralisi
2017-12-13 17:21       ` Joao Pinto
2017-12-14 12:16         ` Gustavo Pimentel
2017-12-14 12:22           ` Lorenzo Pieralisi
2017-12-14 12:38             ` Gustavo Pimentel
2017-12-18 15:57               ` Lorenzo Pieralisi
2017-12-18 16:11                 ` Gustavo Pimentel
     [not found]                   ` <95866c7e-5177-69d6-ac64-1ba7f8b3e36d@synopsys.com>
2017-12-19 14:10                     ` Lorenzo Pieralisi
2017-12-19 23:55                     ` Niklas Cassel
2017-12-19 10:19   ` Lorenzo Pieralisi
2017-12-19 22:13     ` Niklas Cassel
2017-11-20 13:32 ` [PATCH v5 02/18] PCI: designware-ep: dw_pcie_ep_set_msi() should only set MMC bits Niklas Cassel
2017-11-20 13:32 ` [PATCH v5 03/18] PCI: designware-ep: Read-only registers need DBI_RO_WR_EN to be writable Niklas Cassel
2017-11-20 13:32 ` [PATCH v5 04/18] PCI: designware-ep: Pre-allocate memory for MSI in dw_pcie_ep_init Niklas Cassel
2017-11-20 13:32 ` [PATCH v5 05/18] PCI: designware-ep: Remove static keyword from dw_pcie_ep_reset_bar() Niklas Cassel
2017-11-20 13:32 ` [PATCH v5 06/18] PCI: designware-ep: Add generic function for raising MSI irq Niklas Cassel
2017-11-20 13:32 ` [PATCH v5 07/18] PCI: dwc: dra7xx: Refactor Kconfig and Makefile handling for host/ep mode Niklas Cassel
2017-11-20 13:32 ` [PATCH v5 08/18] PCI: dwc: dra7xx: Assign pp->ops in dra7xx_add_pcie_port() rather than in probe Niklas Cassel
2017-11-20 13:32 ` [PATCH v5 09/18] PCI: dwc: dra7xx: Help compiler to remove unused code Niklas Cassel
2017-11-20 13:32 ` [PATCH v5 10/18] PCI: dwc: artpec6: Remove unused defines Niklas Cassel
2017-11-20 13:32 ` [PATCH v5 11/18] PCI: dwc: artpec6: Use BIT and GENMASK macros Niklas Cassel
2017-11-20 13:32 ` [PATCH v5 12/18] PCI: dwc: artpec6: Split artpec6_pcie_establish_link() into smaller functions Niklas Cassel
2017-11-20 13:32 ` [PATCH v5 13/18] bindings: PCI: artpec: Add support for endpoint mode Niklas Cassel
2017-11-20 13:32   ` Niklas Cassel
2017-11-20 13:32 ` [PATCH v5 14/18] PCI: dwc: artpec6: " Niklas Cassel
2017-11-20 13:32 ` [PATCH v5 15/18] PCI: dwc: Make cpu_addr_fixup take struct dw_pcie as argument Niklas Cassel
2017-12-18 18:10   ` Lorenzo Pieralisi
2017-12-18 21:15     ` Niklas Cassel
2017-12-19 10:48       ` Lorenzo Pieralisi
2017-11-20 13:32 ` Niklas Cassel [this message]
2017-11-20 13:32 ` [PATCH v5 17/18] bindings: PCI: artpec: Add support for the ARTPEC-7 SoC Niklas Cassel
2017-11-20 13:32 ` [PATCH v5 18/18] PCI: dwc: artpec6: " Niklas Cassel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171120133222.27771-17-niklas.cassel@axis.com \
    --to=niklas.cassel@axis.com \
    --cc=bhelgaas@google.com \
    --cc=jespern@axis.com \
    --cc=linux-arm-kernel@axis.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=niklass@axis.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.