From: Takashi Iwai <tiwai@suse.de>
To: alsa-devel@alsa-project.org
Cc: Hui Wang <hui.wang@canonical.com>, Kailang <kailang@realtek.com>
Subject: [PATCH 3/3] conf/ucm: Add Gigabyte mobo UCM profile with dual HD-audio codecs
Date: Tue, 5 Dec 2017 17:46:20 +0100 [thread overview]
Message-ID: <20171205164620.6257-3-tiwai@suse.de> (raw)
In-Reply-To: <20171205164620.6257-1-tiwai@suse.de>
Like the previous Lenovo laptops, some Gigabyte mobos have dual
HD-audio codecs and need to switch dynamically via UCM profile.
Reuse the same profile as Lenovo dual codecs, so far.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
configure.ac | 1 +
.../HDAudio-Gigabyte-ALC1220DualCodecs.conf | 5 +
.../HDAudio-Gigabyte-ALC1220DualCodecs/HiFi.conf | 145 +++++++++++++++++++++
.../HDAudio-Gigabyte-ALC1220DualCodecs/Makefile.am | 4 +
src/conf/ucm/Makefile.am | 1 +
5 files changed, 156 insertions(+)
create mode 100644 src/conf/ucm/HDAudio-Gigabyte-ALC1220DualCodecs/HDAudio-Gigabyte-ALC1220DualCodecs.conf
create mode 100644 src/conf/ucm/HDAudio-Gigabyte-ALC1220DualCodecs/HiFi.conf
create mode 100644 src/conf/ucm/HDAudio-Gigabyte-ALC1220DualCodecs/Makefile.am
diff --git a/configure.ac b/configure.ac
index 286f6bdd74cb..1d97946d843f 100644
--- a/configure.ac
+++ b/configure.ac
@@ -698,6 +698,7 @@ AC_OUTPUT(Makefile doc/Makefile doc/pictures/Makefile doc/doxygen.cfg \
src/conf/ucm/DAISY-I2S/Makefile \
src/conf/ucm/DB410c/Makefile \
src/conf/ucm/GoogleNyan/Makefile \
+ src/conf/ucm/HDAudio-Gigabyte-ALC1220DualCodecs/Makefile \
src/conf/ucm/HDAudio-Lenovo-DualCodecs/Makefile \
src/conf/ucm/PandaBoard/Makefile \
src/conf/ucm/PandaBoardES/Makefile \
diff --git a/src/conf/ucm/HDAudio-Gigabyte-ALC1220DualCodecs/HDAudio-Gigabyte-ALC1220DualCodecs.conf b/src/conf/ucm/HDAudio-Gigabyte-ALC1220DualCodecs/HDAudio-Gigabyte-ALC1220DualCodecs.conf
new file mode 100644
index 000000000000..492eebf01aa9
--- /dev/null
+++ b/src/conf/ucm/HDAudio-Gigabyte-ALC1220DualCodecs/HDAudio-Gigabyte-ALC1220DualCodecs.conf
@@ -0,0 +1,5 @@
+Comment "Gigabyte mobo with dual HD-audio codecs"
+SectionUseCase."HiFi" {
+ File "HiFi.conf"
+ Comment "Default"
+}
diff --git a/src/conf/ucm/HDAudio-Gigabyte-ALC1220DualCodecs/HiFi.conf b/src/conf/ucm/HDAudio-Gigabyte-ALC1220DualCodecs/HiFi.conf
new file mode 100644
index 000000000000..509678964f3f
--- /dev/null
+++ b/src/conf/ucm/HDAudio-Gigabyte-ALC1220DualCodecs/HiFi.conf
@@ -0,0 +1,145 @@
+SectionVerb {
+ Value {
+ TQ "HiFi"
+ }
+
+ EnableSequence [
+ cdev "hw:PCH"
+ cset "name='Front Playback Volume' 100%"
+ cset "name='Front Playback Switch' on"
+ cset "name='Rear-Panel Capture Volume' 100%"
+ cset "name='Rear-Panel Capture Switch' on"
+ ]
+
+ DisableSequence [
+ cdev "hw:PCH"
+ cset "name='Front Playback Volume' 0"
+ cset "name='Front Playback Switch' off"
+ cset "name='Rear-Panel Capture Volume' 0"
+ cset "name='Rear-Panel Capture Switch' off"
+ ]
+}
+
+SectionDevice."Speaker" {
+ Comment "Speaker"
+
+ Value {
+ PlaybackChannels "2"
+ PlaybackPCM "hw:PCH,4"
+ }
+
+ ConflictingDevice [
+ "Headphone"
+ ]
+
+ EnableSequence [
+ cdev "hw:PCH"
+ cset "name='Speaker Playback Switch' on"
+ cset "name='Speaker Playback Volume' 100%"
+ ]
+
+ DisableSequence [
+ cdev "hw:PCH"
+ cset "name='Speaker Playback Volume' 0"
+ cset "name='Speaker Playback Switch' off"
+ ]
+}
+
+SectionDevice."LineOut" {
+ Comment "Line Out"
+
+ Value {
+ PlaybackChannels "2"
+ PlaybackPCM "hw:PCH,0"
+ JackControl "Line Out Jack"
+ JackHWMute "Speaker"
+ }
+}
+
+SectionDevice."Headphone" {
+ Comment "Headphone"
+
+ Value {
+ PlaybackChannels "2"
+ PlaybackPCM "hw:PCH,4"
+ JackControl "Front Headphone Jack"
+ JackHWMute "Speaker"
+ }
+
+ ConflictingDevice [
+ "Speaker"
+ ]
+
+ EnableSequence [
+ cdev "hw:PCH"
+ cset "name='Headphone Playback Switch' on"
+ cset "name='Headphone Playback Volume' 100%"
+ ]
+
+ DisableSequence [
+ cdev "hw:PCH"
+ cset "name='Headphone Playback Volume' 0"
+ cset "name='Headphone Playback Switch' off"
+ ]
+}
+
+SectionDevice."LineIn" {
+ Comment "Rear Line In"
+
+ Value {
+ CaptureChannels "2"
+ CapturePCM "hw:PCH,0"
+ JackControl "Line Jack"
+ }
+
+ ConflictingDevice [
+ "RearMic"
+ ]
+
+ EnableSequence [
+ cdev "hw:PCH"
+ cset "name='Input Source' Line"
+ ]
+}
+
+SectionDevice."RearMic" {
+ Comment "Rear Microphone"
+
+ Value {
+ CaptureChannels "2"
+ CapturePCM "hw:PCH,0"
+ # CapturePriority "150"
+ JackHWMute "LineIn"
+ }
+
+ ConflictingDevice [
+ "LineIn"
+ ]
+
+ EnableSequence [
+ cdev "hw:PCH"
+ cset "name='Input Source' Rear Mic"
+ ]
+}
+
+SectionDevice."FrontMic" {
+ Comment "Front Microphone"
+
+ Value {
+ CaptureChannels "2"
+ CapturePCM "hw:PCH,4"
+ JackControl "Front Mic Jack"
+ }
+
+ EnableSequence [
+ cdev "hw:PCH"
+ cset "name='Front-Panel Capture Volume' 100%"
+ cset "name='Front-Panel Capture Switch' on"
+ ]
+
+ DisableSequence [
+ cdev "hw:PCH"
+ cset "name='Front-Panel Capture Volume' 0"
+ cset "name='Front-Panel Capture Switch' off"
+ ]
+}
diff --git a/src/conf/ucm/HDAudio-Gigabyte-ALC1220DualCodecs/Makefile.am b/src/conf/ucm/HDAudio-Gigabyte-ALC1220DualCodecs/Makefile.am
new file mode 100644
index 000000000000..728fd19b9251
--- /dev/null
+++ b/src/conf/ucm/HDAudio-Gigabyte-ALC1220DualCodecs/Makefile.am
@@ -0,0 +1,4 @@
+alsaconfigdir = @ALSA_CONFIG_DIR@
+ucmdir = $(alsaconfigdir)/ucm/HDAudio-Gigabyte-ALC1220DualCodecs
+ucm_DATA = HDAudio-Gigabyte-ALC1220DualCodecs.conf HiFi.conf
+EXTRA_DIST = $(ucm_DATA)
diff --git a/src/conf/ucm/Makefile.am b/src/conf/ucm/Makefile.am
index 1d81beeb4ddf..954e32b8f0c8 100644
--- a/src/conf/ucm/Makefile.am
+++ b/src/conf/ucm/Makefile.am
@@ -6,6 +6,7 @@ chtrt5645 \
DAISY-I2S \
DB410c \
GoogleNyan \
+HDAudio-Gigabyte-ALC1220DualCodecs \
HDAudio-Lenovo-DualCodecs \
PandaBoard \
PandaBoardES \
--
2.15.0
prev parent reply other threads:[~2017-12-05 16:46 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-05 16:46 [PATCH 1/3] conf/ucm: Rearrange Makefile.am Takashi Iwai
2017-12-05 16:46 ` [PATCH 2/3] conf/ucm: Add dual HD-audio codecs config for Lenovo Takashi Iwai
2017-12-05 16:46 ` Takashi Iwai [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171205164620.6257-3-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
--cc=hui.wang@canonical.com \
--cc=kailang@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.