From: Wolfram Sang <wsa+renesas@sang-engineering.com>
To: linux-renesas-soc@vger.kernel.org
Cc: Simon Horman <horms@verge.net.au>,
Magnus Damm <magnus.damm@gmail.com>,
Wolfram Sang <wsa+renesas@sang-engineering.com>,
Simon Horman <horms+renesas@verge.net.au>
Subject: [PATCH v2 1/9] ARM: dts: lager: use demuxer for IIC2/I2C2
Date: Sun, 31 Dec 2017 12:23:12 +0100 [thread overview]
Message-ID: <20171231112320.3461-2-wsa+renesas@sang-engineering.com> (raw)
In-Reply-To: <20171231112320.3461-1-wsa+renesas@sang-engineering.com>
Create a separate bus for HDMI related I2C slaves.
Based on work by Wolfram Sang.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
[wsa: rebased, removed typo in comment, fixed aliases, switched to
named GPIOS, sort SCL pins first]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
arch/arm/boot/dts/r8a7790-lager.dts | 197 +++++++++++++++++++++---------------
1 file changed, 116 insertions(+), 81 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index f2ea632381e7d1..e4050dae7e8e33 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -51,8 +51,10 @@
serial0 = &scif0;
serial1 = &scifa1;
i2c8 = &gpioi2c1;
+ i2c9 = &gpioi2c2;
i2c10 = &i2cexio0;
i2c11 = &i2cexio1;
+ i2c12 = &i2chdmi;
};
chosen {
@@ -272,8 +274,18 @@
#size-cells = <0>;
compatible = "i2c-gpio";
status = "disabled";
- sda-gpios = <&gpio1 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpio1 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio1 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <5>;
+ };
+
+ gpioi2c2: i2c-9 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "i2c-gpio";
+ status = "disabled";
+ scl-gpios = <&gpio5 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
i2c-gpio,delay-us = <5>;
};
@@ -308,6 +320,96 @@
#address-cells = <1>;
#size-cells = <0>;
};
+
+ /*
+ * IIC2 and I2C2 may be switched using pinmux.
+ * A fallback to GPIO is also provided.
+ */
+ i2chdmi: i2c-12 {
+ compatible = "i2c-demux-pinctrl";
+ i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>;
+ i2c-bus-name = "i2c-hdmi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ak4643: codec@12 {
+ compatible = "asahi-kasei,ak4643";
+ #sound-dai-cells = <0>;
+ reg = <0x12>;
+ };
+
+ composite-in@20 {
+ compatible = "adi,adv7180";
+ reg = <0x20>;
+ remote = <&vin1>;
+
+ port {
+ adv7180: endpoint {
+ bus-width = <8>;
+ remote-endpoint = <&vin1ep0>;
+ };
+ };
+ };
+
+ hdmi@39 {
+ compatible = "adi,adv7511w";
+ reg = <0x39>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+ adi,input-style = <1>;
+ adi,input-justification = "evenly";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7511_in: endpoint {
+ remote-endpoint = <&du_out_lvds0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ adv7511_out: endpoint {
+ remote-endpoint = <&hdmi_con_out>;
+ };
+ };
+ };
+ };
+
+ hdmi-in@4c {
+ compatible = "adi,adv7612";
+ reg = <0x4c>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+ default-input = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7612_in: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ adv7612_out: endpoint {
+ remote-endpoint = <&vin0ep2>;
+ };
+ };
+ };
+ };
+ };
};
&du {
@@ -437,6 +539,11 @@
function = "iic1";
};
+ i2c2_pins: i2c2 {
+ groups = "i2c2";
+ function = "i2c2";
+ };
+
iic2_pins: iic2 {
groups = "iic2";
function = "iic2";
@@ -643,90 +750,18 @@
pinctrl-names = "i2c-exio1";
};
-&iic2 {
- status = "okay";
- pinctrl-0 = <&iic2_pins>;
- pinctrl-names = "default";
+&i2c2 {
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "i2c-hdmi";
clock-frequency = <100000>;
+};
- ak4643: codec@12 {
- compatible = "asahi-kasei,ak4643";
- #sound-dai-cells = <0>;
- reg = <0x12>;
- };
-
- composite-in@20 {
- compatible = "adi,adv7180";
- reg = <0x20>;
- remote = <&vin1>;
-
- port {
- adv7180: endpoint {
- bus-width = <8>;
- remote-endpoint = <&vin1ep0>;
- };
- };
- };
-
- hdmi@39 {
- compatible = "adi,adv7511w";
- reg = <0x39>;
- interrupt-parent = <&gpio1>;
- interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
-
- adi,input-depth = <8>;
- adi,input-colorspace = "rgb";
- adi,input-clock = "1x";
- adi,input-style = <1>;
- adi,input-justification = "evenly";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- adv7511_in: endpoint {
- remote-endpoint = <&du_out_lvds0>;
- };
- };
-
- port@1 {
- reg = <1>;
- adv7511_out: endpoint {
- remote-endpoint = <&hdmi_con_out>;
- };
- };
- };
- };
-
- hdmi-in@4c {
- compatible = "adi,adv7612";
- reg = <0x4c>;
- interrupt-parent = <&gpio1>;
- interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
- default-input = <0>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- adv7612_in: endpoint {
- remote-endpoint = <&hdmi_con_in>;
- };
- };
+&iic2 {
+ pinctrl-0 = <&iic2_pins>;
+ pinctrl-names = "i2c-hdmi";
- port@2 {
- reg = <2>;
- adv7612_out: endpoint {
- remote-endpoint = <&vin0ep2>;
- };
- };
- };
- };
+ clock-frequency = <100000>;
};
&iic3 {
--
2.11.0
next prev parent reply other threads:[~2017-12-31 11:23 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-31 11:23 [PATCH v2 0/9] ARM: dts: gen2: add IP core switcher for all busses Wolfram Sang
2017-12-31 11:23 ` Wolfram Sang [this message]
2017-12-31 11:23 ` [PATCH v2 2/9] ARM: dts: lager: use demuxer for IIC3/I2C3 Wolfram Sang
2017-12-31 11:23 ` [PATCH v2 3/9] ARM: dts: koelsch: use demuxer for I2C2 Wolfram Sang
2017-12-31 11:23 ` [PATCH v2 4/9] ARM: dts: koelsch: use demuxer for I2C4 Wolfram Sang
2017-12-31 11:23 ` [PATCH v2 5/9] ARM: dts: porter: use demuxer for I2C2 Wolfram Sang
2017-12-31 11:23 ` [PATCH v2 6/9] ARM: dts: alt: use demuxer for I2C1 Wolfram Sang
2017-12-31 11:23 ` [PATCH v2 7/9] ARM: dts: silk: " Wolfram Sang
2017-12-31 11:23 ` [PATCH v2 8/9] ARM: dts: gose: use demuxer for I2C2 Wolfram Sang
2017-12-31 11:23 ` [PATCH v2 9/9] ARM: dts: gose: use demuxer for I2C4 Wolfram Sang
2018-01-02 21:58 ` [PATCH v2 0/9] ARM: dts: gen2: add IP core switcher for all busses Niklas Söderlund
2018-01-02 22:28 ` Wolfram Sang
2018-01-30 10:51 ` Wolfram Sang
2018-01-30 16:45 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171231112320.3461-2-wsa+renesas@sang-engineering.com \
--to=wsa+renesas@sang-engineering.com \
--cc=horms+renesas@verge.net.au \
--cc=horms@verge.net.au \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.