From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: qemu-arm@nongnu.org
Cc: "Andrey Smirnov" <andrew.smirnov@gmail.com>,
"Peter Maydell" <peter.maydell@linaro.org>,
"Jason Wang" <jasowang@redhat.com>,
"Philippe Mathieu-Daudé" <f4bug@amsat.org>,
"Marcel Apfelbaum" <marcel.apfelbaum@zoho.com>,
"Michael S . Tsirkin" <mst@redhat.com>,
qemu-devel@nongnu.org, yurovsky@gmail.com
Subject: [Qemu-devel] [PATCH v6 1/3] pci: Add support for Designware IP block
Date: Tue, 13 Feb 2018 09:07:10 -0800 [thread overview]
Message-ID: <20180213170712.18239-2-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20180213170712.18239-1-andrew.smirnov@gmail.com>
Add code needed to get a functional PCI subsytem when using in
conjunction with upstream Linux guest (4.13+). Tested to work against
"e1000e" (network adapter, using MSI interrupts) as well as
"usb-ehci" (USB controller, using legacy PCI interrupts).
Based on "i.MX6 Applications Processor Reference Manual" (Document
Number: IMX6DQRM Rev. 4) as well as corresponding dirver in Linux
kernel (circa 4.13 - 4.16 found in drivers/pci/dwc/*)
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Marcel Apfelbaum <marcel.apfelbaum@zoho.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
default-configs/arm-softmmu.mak | 2 +
include/hw/pci-host/designware.h | 102 ++++++
include/hw/pci/pci_ids.h | 2 +
hw/pci-host/designware.c | 755 +++++++++++++++++++++++++++++++++++++++
hw/pci-host/Makefile.objs | 2 +
5 files changed, 863 insertions(+)
create mode 100644 include/hw/pci-host/designware.h
create mode 100644 hw/pci-host/designware.c
diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index ca34cf4462..877bb7dd36 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -133,3 +133,5 @@ CONFIG_GPIO_KEY=y
CONFIG_MSF2=y
CONFIG_FW_CFG_DMA=y
CONFIG_XILINX_AXI=y
+CONFIG_PCI_DESIGNWARE=y
+
diff --git a/include/hw/pci-host/designware.h b/include/hw/pci-host/designware.h
new file mode 100644
index 0000000000..a4f2c0695b
--- /dev/null
+++ b/include/hw/pci-host/designware.h
@@ -0,0 +1,102 @@
+/*
+ * Copyright (c) 2017, Impinj, Inc.
+ *
+ * Designware PCIe IP block emulation
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see
+ * <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef DESIGNWARE_H
+#define DESIGNWARE_H
+
+#include "hw/hw.h"
+#include "hw/sysbus.h"
+#include "hw/pci/pci.h"
+#include "hw/pci/pci_bus.h"
+#include "hw/pci/pcie_host.h"
+#include "hw/pci/pci_bridge.h"
+
+#define TYPE_DESIGNWARE_PCIE_HOST "designware-pcie-host"
+#define DESIGNWARE_PCIE_HOST(obj) \
+ OBJECT_CHECK(DesignwarePCIEHost, (obj), TYPE_DESIGNWARE_PCIE_HOST)
+
+#define TYPE_DESIGNWARE_PCIE_ROOT "designware-pcie-root"
+#define DESIGNWARE_PCIE_ROOT(obj) \
+ OBJECT_CHECK(DesignwarePCIERoot, (obj), TYPE_DESIGNWARE_PCIE_ROOT)
+
+struct DesignwarePCIERoot;
+typedef struct DesignwarePCIERoot DesignwarePCIERoot;
+
+typedef struct DesignwarePCIEViewport {
+ DesignwarePCIERoot *root;
+
+ MemoryRegion cfg;
+ MemoryRegion mem;
+
+ uint64_t base;
+ uint64_t target;
+ uint32_t limit;
+ uint32_t cr[2];
+
+ bool inbound;
+} DesignwarePCIEViewport;
+
+typedef struct DesignwarePCIEMSIBank {
+ uint32_t enable;
+ uint32_t mask;
+ uint32_t status;
+} DesignwarePCIEMSIBank;
+
+typedef struct DesignwarePCIEMSI {
+ uint64_t base;
+ MemoryRegion iomem;
+
+#define DESIGNWARE_PCIE_NUM_MSI_BANKS 1
+
+ DesignwarePCIEMSIBank intr[DESIGNWARE_PCIE_NUM_MSI_BANKS];
+} DesignwarePCIEMSI;
+
+struct DesignwarePCIERoot {
+ PCIBridge parent_obj;
+
+ uint32_t atu_viewport;
+
+#define DESIGNWARE_PCIE_VIEWPORT_OUTBOUND 0
+#define DESIGNWARE_PCIE_VIEWPORT_INBOUND 1
+#define DESIGNWARE_PCIE_NUM_VIEWPORTS 4
+
+ DesignwarePCIEViewport viewports[2][DESIGNWARE_PCIE_NUM_VIEWPORTS];
+ DesignwarePCIEMSI msi;
+};
+
+typedef struct DesignwarePCIEHost {
+ PCIHostState parent_obj;
+
+ DesignwarePCIERoot root;
+
+ struct {
+ AddressSpace address_space;
+ MemoryRegion address_space_root;
+
+ MemoryRegion memory;
+ MemoryRegion io;
+
+ qemu_irq irqs[4];
+ } pci;
+
+ MemoryRegion mmio;
+} DesignwarePCIEHost;
+
+#endif /* DESIGNWARE_H */
diff --git a/include/hw/pci/pci_ids.h b/include/hw/pci/pci_ids.h
index 35df1874a9..23fefe1bc6 100644
--- a/include/hw/pci/pci_ids.h
+++ b/include/hw/pci/pci_ids.h
@@ -266,4 +266,6 @@
#define PCI_VENDOR_ID_TEWS 0x1498
#define PCI_DEVICE_ID_TEWS_TPCI200 0x30C8
+#define PCI_VENDOR_ID_SYNOPSYS 0x16C3
+
#endif
diff --git a/hw/pci-host/designware.c b/hw/pci-host/designware.c
new file mode 100644
index 0000000000..18935c11f6
--- /dev/null
+++ b/hw/pci-host/designware.c
@@ -0,0 +1,755 @@
+/*
+ * Copyright (c) 2018, Impinj, Inc.
+ *
+ * Designware PCIe IP block emulation
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see
+ * <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "hw/pci/msi.h"
+#include "hw/pci/pci_bridge.h"
+#include "hw/pci/pci_host.h"
+#include "hw/pci/pcie_port.h"
+#include "hw/pci-host/designware.h"
+
+#define DESIGNWARE_PCIE_PORT_LINK_CONTROL 0x710
+#define DESIGNWARE_PCIE_PHY_DEBUG_R1 0x72C
+#define DESIGNWARE_PCIE_PHY_DEBUG_R1_XMLH_LINK_UP BIT(4)
+#define DESIGNWARE_PCIE_LINK_WIDTH_SPEED_CONTROL 0x80C
+#define DESIGNWARE_PCIE_PORT_LOGIC_SPEED_CHANGE BIT(17)
+#define DESIGNWARE_PCIE_MSI_ADDR_LO 0x820
+#define DESIGNWARE_PCIE_MSI_ADDR_HI 0x824
+#define DESIGNWARE_PCIE_MSI_INTR0_ENABLE 0x828
+#define DESIGNWARE_PCIE_MSI_INTR0_MASK 0x82C
+#define DESIGNWARE_PCIE_MSI_INTR0_STATUS 0x830
+#define DESIGNWARE_PCIE_ATU_VIEWPORT 0x900
+#define DESIGNWARE_PCIE_ATU_REGION_INBOUND BIT(31)
+#define DESIGNWARE_PCIE_ATU_CR1 0x904
+#define DESIGNWARE_PCIE_ATU_TYPE_MEM (0x0 << 0)
+#define DESIGNWARE_PCIE_ATU_CR2 0x908
+#define DESIGNWARE_PCIE_ATU_ENABLE BIT(31)
+#define DESIGNWARE_PCIE_ATU_LOWER_BASE 0x90C
+#define DESIGNWARE_PCIE_ATU_UPPER_BASE 0x910
+#define DESIGNWARE_PCIE_ATU_LIMIT 0x914
+#define DESIGNWARE_PCIE_ATU_LOWER_TARGET 0x918
+#define DESIGNWARE_PCIE_ATU_BUS(x) (((x) >> 24) & 0xff)
+#define DESIGNWARE_PCIE_ATU_DEVFN(x) (((x) >> 16) & 0xff)
+#define DESIGNWARE_PCIE_ATU_UPPER_TARGET 0x91C
+
+static DesignwarePCIEHost *
+designware_pcie_root_to_host(DesignwarePCIERoot *root)
+{
+ BusState *bus = qdev_get_parent_bus(DEVICE(root));
+ return DESIGNWARE_PCIE_HOST(bus->parent);
+}
+
+static void designware_pcie_root_msi_write(void *opaque, hwaddr addr,
+ uint64_t val, unsigned len)
+{
+ DesignwarePCIERoot *root = DESIGNWARE_PCIE_ROOT(opaque);
+ DesignwarePCIEHost *host = designware_pcie_root_to_host(root);
+
+ root->msi.intr[0].status |= BIT(val) & root->msi.intr[0].enable;
+
+ if (root->msi.intr[0].status & ~root->msi.intr[0].mask) {
+ qemu_set_irq(host->pci.irqs[0], 1);
+ }
+}
+
+static const MemoryRegionOps designware_pci_host_msi_ops = {
+ .write = designware_pcie_root_msi_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 4,
+ .max_access_size = 4,
+ },
+};
+
+static void designware_pcie_root_update_msi_mapping(DesignwarePCIERoot *root)
+
+{
+ MemoryRegion *mem = &root->msi.iomem;
+ const uint64_t base = root->msi.base;
+ const bool enable = root->msi.intr[0].enable;
+
+ memory_region_set_address(mem, base);
+ memory_region_set_enabled(mem, enable);
+}
+
+static DesignwarePCIEViewport *
+designware_pcie_root_get_current_viewport(DesignwarePCIERoot *root)
+{
+ const unsigned int idx = root->atu_viewport & 0xF;
+ const unsigned int dir =
+ !!(root->atu_viewport & DESIGNWARE_PCIE_ATU_REGION_INBOUND);
+ return &root->viewports[dir][idx];
+}
+
+static uint32_t
+designware_pcie_root_config_read(PCIDevice *d, uint32_t address, int len)
+{
+ DesignwarePCIERoot *root = DESIGNWARE_PCIE_ROOT(d);
+ DesignwarePCIEViewport *viewport =
+ designware_pcie_root_get_current_viewport(root);
+
+ uint32_t val;
+
+ switch (address) {
+ case DESIGNWARE_PCIE_PORT_LINK_CONTROL:
+ /*
+ * Linux guest uses this register only to configure number of
+ * PCIE lane (which in our case is irrelevant) and doesn't
+ * really care about the value it reads from this register
+ */
+ val = 0xDEADBEEF;
+ break;
+
+ case DESIGNWARE_PCIE_LINK_WIDTH_SPEED_CONTROL:
+ /*
+ * To make sure that any code in guest waiting for speed
+ * change does not time out we always report
+ * PORT_LOGIC_SPEED_CHANGE as set
+ */
+ val = DESIGNWARE_PCIE_PORT_LOGIC_SPEED_CHANGE;
+ break;
+
+ case DESIGNWARE_PCIE_MSI_ADDR_LO:
+ val = root->msi.base;
+ break;
+
+ case DESIGNWARE_PCIE_MSI_ADDR_HI:
+ val = root->msi.base >> 32;
+ break;
+
+ case DESIGNWARE_PCIE_MSI_INTR0_ENABLE:
+ val = root->msi.intr[0].enable;
+ break;
+
+ case DESIGNWARE_PCIE_MSI_INTR0_MASK:
+ val = root->msi.intr[0].mask;
+ break;
+
+ case DESIGNWARE_PCIE_MSI_INTR0_STATUS:
+ val = root->msi.intr[0].status;
+ break;
+
+ case DESIGNWARE_PCIE_PHY_DEBUG_R1:
+ val = DESIGNWARE_PCIE_PHY_DEBUG_R1_XMLH_LINK_UP;
+ break;
+
+ case DESIGNWARE_PCIE_ATU_VIEWPORT:
+ val = root->atu_viewport;
+ break;
+
+ case DESIGNWARE_PCIE_ATU_LOWER_BASE:
+ val = viewport->base;
+ break;
+
+ case DESIGNWARE_PCIE_ATU_UPPER_BASE:
+ val = viewport->base >> 32;
+ break;
+
+ case DESIGNWARE_PCIE_ATU_LOWER_TARGET:
+ val = viewport->target;
+ break;
+
+ case DESIGNWARE_PCIE_ATU_UPPER_TARGET:
+ val = viewport->target >> 32;
+ break;
+
+ case DESIGNWARE_PCIE_ATU_LIMIT:
+ val = viewport->limit;
+ break;
+
+ case DESIGNWARE_PCIE_ATU_CR1:
+ case DESIGNWARE_PCIE_ATU_CR2: /* FALLTHROUGH */
+ val = viewport->cr[(address - DESIGNWARE_PCIE_ATU_CR1) /
+ sizeof(uint32_t)];
+ break;
+
+ default:
+ val = pci_default_read_config(d, address, len);
+ break;
+ }
+
+ return val;
+}
+
+static uint64_t designware_pcie_root_data_access(void *opaque, hwaddr addr,
+ uint64_t *val, unsigned len)
+{
+ DesignwarePCIEViewport *viewport = opaque;
+ DesignwarePCIERoot *root = viewport->root;
+
+ const uint8_t busnum = DESIGNWARE_PCIE_ATU_BUS(viewport->target);
+ const uint8_t devfn = DESIGNWARE_PCIE_ATU_DEVFN(viewport->target);
+ PCIBus *pcibus = pci_get_bus(PCI_DEVICE(root));
+ PCIDevice *pcidev = pci_find_device(pcibus, busnum, devfn);
+
+ if (pcidev) {
+ addr &= pci_config_size(pcidev) - 1;
+
+ if (val) {
+ pci_host_config_write_common(pcidev, addr,
+ pci_config_size(pcidev),
+ *val, len);
+ } else {
+ return pci_host_config_read_common(pcidev, addr,
+ pci_config_size(pcidev),
+ len);
+ }
+ }
+
+ return UINT64_MAX;
+}
+
+static uint64_t designware_pcie_root_data_read(void *opaque, hwaddr addr,
+ unsigned len)
+{
+ return designware_pcie_root_data_access(opaque, addr, NULL, len);
+}
+
+static void designware_pcie_root_data_write(void *opaque, hwaddr addr,
+ uint64_t val, unsigned len)
+{
+ designware_pcie_root_data_access(opaque, addr, &val, len);
+}
+
+static const MemoryRegionOps designware_pci_host_conf_ops = {
+ .read = designware_pcie_root_data_read,
+ .write = designware_pcie_root_data_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 1,
+ .max_access_size = 4,
+ },
+};
+
+static void designware_pcie_update_viewport(DesignwarePCIERoot *root,
+ DesignwarePCIEViewport *viewport)
+{
+ const uint64_t target = viewport->target;
+ const uint64_t base = viewport->base;
+ const uint64_t size = (uint64_t)viewport->limit - base + 1;
+ const bool enabled = viewport->cr[1] & DESIGNWARE_PCIE_ATU_ENABLE;
+
+ MemoryRegion *current, *other;
+
+ if (viewport->cr[0] == DESIGNWARE_PCIE_ATU_TYPE_MEM) {
+ current = &viewport->mem;
+ other = &viewport->cfg;
+ memory_region_set_alias_offset(current, target);
+ } else {
+ current = &viewport->cfg;
+ other = &viewport->mem;
+ }
+
+ /*
+ * An outbound viewport can be reconfigure from being MEM to CFG,
+ * to account for that we disable the "other" memory region that
+ * becomes unused due to that fact.
+ */
+ memory_region_set_enabled(other, false);
+ if (enabled) {
+ memory_region_set_size(current, size);
+ memory_region_set_address(current, base);
+ }
+ memory_region_set_enabled(current, enabled);
+}
+
+static void designware_pcie_root_config_write(PCIDevice *d, uint32_t address,
+ uint32_t val, int len)
+{
+ DesignwarePCIERoot *root = DESIGNWARE_PCIE_ROOT(d);
+ DesignwarePCIEHost *host = designware_pcie_root_to_host(root);
+ DesignwarePCIEViewport *viewport =
+ designware_pcie_root_get_current_viewport(root);
+
+ switch (address) {
+ case DESIGNWARE_PCIE_PORT_LINK_CONTROL:
+ case DESIGNWARE_PCIE_LINK_WIDTH_SPEED_CONTROL:
+ case DESIGNWARE_PCIE_PHY_DEBUG_R1:
+ /* No-op */
+ break;
+
+ case DESIGNWARE_PCIE_MSI_ADDR_LO:
+ root->msi.base &= 0xFFFFFFFF00000000ULL;
+ root->msi.base |= val;
+ break;
+
+ case DESIGNWARE_PCIE_MSI_ADDR_HI:
+ root->msi.base &= 0x00000000FFFFFFFFULL;
+ root->msi.base |= (uint64_t)val << 32;
+ break;
+
+ case DESIGNWARE_PCIE_MSI_INTR0_ENABLE: {
+ const bool update_msi_mapping = !root->msi.intr[0].enable ^ !!val;
+
+ root->msi.intr[0].enable = val;
+
+ if (update_msi_mapping) {
+ designware_pcie_root_update_msi_mapping(root);
+ }
+ break;
+ }
+
+ case DESIGNWARE_PCIE_MSI_INTR0_MASK:
+ root->msi.intr[0].mask = val;
+ break;
+
+ case DESIGNWARE_PCIE_MSI_INTR0_STATUS:
+ root->msi.intr[0].status ^= val;
+ if (!root->msi.intr[0].status) {
+ qemu_set_irq(host->pci.irqs[0], 0);
+ }
+ break;
+
+ case DESIGNWARE_PCIE_ATU_VIEWPORT:
+ root->atu_viewport = val;
+ break;
+
+ case DESIGNWARE_PCIE_ATU_LOWER_BASE:
+ viewport->base &= 0xFFFFFFFF00000000ULL;
+ viewport->base |= val;
+ break;
+
+ case DESIGNWARE_PCIE_ATU_UPPER_BASE:
+ viewport->base &= 0x00000000FFFFFFFFULL;
+ viewport->base |= (uint64_t)val << 32;
+ break;
+
+ case DESIGNWARE_PCIE_ATU_LOWER_TARGET:
+ viewport->target &= 0xFFFFFFFF00000000ULL;
+ viewport->target |= val;
+ break;
+
+ case DESIGNWARE_PCIE_ATU_UPPER_TARGET:
+ viewport->target &= 0x00000000FFFFFFFFULL;
+ viewport->target |= val;
+ break;
+
+ case DESIGNWARE_PCIE_ATU_LIMIT:
+ viewport->limit = val;
+ break;
+
+ case DESIGNWARE_PCIE_ATU_CR1:
+ viewport->cr[0] = val;
+ break;
+ case DESIGNWARE_PCIE_ATU_CR2:
+ viewport->cr[1] = val;
+ designware_pcie_update_viewport(root, viewport);
+ break;
+
+ default:
+ pci_bridge_write_config(d, address, val, len);
+ break;
+ }
+}
+
+static char *designware_pcie_viewport_name(const char *direction,
+ unsigned int i,
+ const char *type)
+{
+ return g_strdup_printf("PCI %s Viewport %u [%s]",
+ direction, i, type);
+}
+
+static void designware_pcie_root_realize(PCIDevice *dev, Error **errp)
+{
+ DesignwarePCIERoot *root = DESIGNWARE_PCIE_ROOT(dev);
+ DesignwarePCIEHost *host = designware_pcie_root_to_host(root);
+ MemoryRegion *address_space = &host->pci.memory;
+ PCIBridge *br = PCI_BRIDGE(dev);
+ DesignwarePCIEViewport *viewport;
+ /*
+ * Dummy values used for initial configuration of MemoryRegions
+ * that belong to a given viewport
+ */
+ const hwaddr dummy_offset = 0;
+ const uint64_t dummy_size = 4;
+ size_t i;
+
+ br->bus_name = "dw-pcie";
+
+ pci_set_word(dev->config + PCI_COMMAND,
+ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+
+ pci_config_set_interrupt_pin(dev->config, 1);
+ pci_bridge_initfn(dev, TYPE_PCIE_BUS);
+
+ pcie_port_init_reg(dev);
+
+ pcie_cap_init(dev, 0x70, PCI_EXP_TYPE_ROOT_PORT,
+ 0, &error_fatal);
+
+ msi_nonbroken = true;
+ msi_init(dev, 0x50, 32, true, true, &error_fatal);
+
+ for (i = 0; i < DESIGNWARE_PCIE_NUM_VIEWPORTS; i++) {
+ MemoryRegion *source, *destination, *mem;
+ const char *direction;
+ char *name;
+
+ viewport = &root->viewports[DESIGNWARE_PCIE_VIEWPORT_INBOUND][i];
+ viewport->inbound = true;
+ viewport->base = 0x0000000000000000ULL;
+ viewport->target = 0x0000000000000000ULL;
+ viewport->limit = UINT32_MAX;
+ viewport->cr[0] = DESIGNWARE_PCIE_ATU_TYPE_MEM;
+
+ source = &host->pci.address_space_root;
+ destination = get_system_memory();
+ direction = "Inbound";
+
+ /*
+ * Configure MemoryRegion implementing PCI -> CPU memory
+ * access
+ */
+ mem = &viewport->mem;
+ name = designware_pcie_viewport_name(direction, i, "MEM");
+ memory_region_init_alias(mem, OBJECT(root), name, destination,
+ dummy_offset, dummy_size);
+ memory_region_add_subregion_overlap(source, dummy_offset, mem, -1);
+ memory_region_set_enabled(mem, false);
+ g_free(name);
+
+ viewport = &root->viewports[DESIGNWARE_PCIE_VIEWPORT_OUTBOUND][i];
+ viewport->root = root;
+ viewport->inbound = false;
+ viewport->base = 0x0000000000000000ULL;
+ viewport->target = 0x0000000000000000ULL;
+ viewport->limit = UINT32_MAX;
+ viewport->cr[0] = DESIGNWARE_PCIE_ATU_TYPE_MEM;
+
+ destination = &host->pci.memory;
+ direction = "Outbound";
+ source = get_system_memory();
+
+ /*
+ * Configure MemoryRegion implementing CPU -> PCI memory
+ * access
+ */
+ mem = &viewport->mem;
+ name = designware_pcie_viewport_name(direction, i, "MEM");
+ memory_region_init_alias(mem, OBJECT(root), name, destination,
+ dummy_offset, dummy_size);
+ memory_region_add_subregion(source, dummy_offset, mem);
+ memory_region_set_enabled(mem, false);
+ g_free(name);
+
+ /*
+ * Configure MemoryRegion implementing access to configuration
+ * space
+ */
+ mem = &viewport->cfg;
+ name = designware_pcie_viewport_name(direction, i, "CFG");
+ memory_region_init_io(&viewport->cfg, OBJECT(root),
+ &designware_pci_host_conf_ops,
+ viewport, name, dummy_size);
+ memory_region_add_subregion(source, dummy_offset, mem);
+ memory_region_set_enabled(mem, false);
+ g_free(name);
+ }
+
+ /*
+ * If no inbound iATU windows are configured, HW defaults to
+ * letting inbound TLPs to pass in. We emulate that by exlicitly
+ * configuring first inbound window to cover all of target's
+ * address space.
+ *
+ * NOTE: This will not work correctly for the case when first
+ * configured inbound window is window 0
+ */
+ viewport = &root->viewports[DESIGNWARE_PCIE_VIEWPORT_INBOUND][0];
+ viewport->cr[1] = DESIGNWARE_PCIE_ATU_ENABLE;
+ designware_pcie_update_viewport(root, viewport);
+
+ memory_region_init_io(&root->msi.iomem, OBJECT(root),
+ &designware_pci_host_msi_ops,
+ root, "pcie-msi", 0x4);
+ /*
+ * We initially place MSI interrupt I/O region a adress 0 and
+ * disable it. It'll be later moved to correct offset and enabled
+ * in designware_pcie_root_update_msi_mapping() as a part of
+ * initialization done by guest OS
+ */
+ memory_region_add_subregion(address_space, dummy_offset, &root->msi.iomem);
+ memory_region_set_enabled(&root->msi.iomem, false);
+}
+
+static void designware_pcie_set_irq(void *opaque, int irq_num, int level)
+{
+ DesignwarePCIEHost *host = DESIGNWARE_PCIE_HOST(opaque);
+
+ qemu_set_irq(host->pci.irqs[irq_num], level);
+}
+
+static const char *
+designware_pcie_host_root_bus_path(PCIHostState *host_bridge, PCIBus *rootbus)
+{
+ return "0000:00";
+}
+
+static const VMStateDescription vmstate_designware_pcie_msi_bank = {
+ .name = "designware-pcie-msi-bank",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32(enable, DesignwarePCIEMSIBank),
+ VMSTATE_UINT32(mask, DesignwarePCIEMSIBank),
+ VMSTATE_UINT32(status, DesignwarePCIEMSIBank),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static const VMStateDescription vmstate_designware_pcie_msi = {
+ .name = "designware-pcie-msi",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT64(base, DesignwarePCIEMSI),
+ VMSTATE_STRUCT_ARRAY(intr,
+ DesignwarePCIEMSI,
+ DESIGNWARE_PCIE_NUM_MSI_BANKS,
+ 1,
+ vmstate_designware_pcie_msi_bank,
+ DesignwarePCIEMSIBank),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static const VMStateDescription vmstate_designware_pcie_viewport = {
+ .name = "designware-pcie-viewport",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT64(base, DesignwarePCIEViewport),
+ VMSTATE_UINT64(target, DesignwarePCIEViewport),
+ VMSTATE_UINT32(limit, DesignwarePCIEViewport),
+ VMSTATE_UINT32_ARRAY(cr, DesignwarePCIEViewport, 2),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static const VMStateDescription vmstate_designware_pcie_root = {
+ .name = "designware-pcie-root",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_PCI_DEVICE(parent_obj, PCIBridge),
+ VMSTATE_UINT32(atu_viewport, DesignwarePCIERoot),
+ VMSTATE_STRUCT_2DARRAY(viewports,
+ DesignwarePCIERoot,
+ 2,
+ DESIGNWARE_PCIE_NUM_VIEWPORTS,
+ 1,
+ vmstate_designware_pcie_viewport,
+ DesignwarePCIEViewport),
+ VMSTATE_STRUCT(msi,
+ DesignwarePCIERoot,
+ 1,
+ vmstate_designware_pcie_msi,
+ DesignwarePCIEMSI),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static void designware_pcie_root_class_init(ObjectClass *klass, void *data)
+{
+ PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
+
+ k->vendor_id = PCI_VENDOR_ID_SYNOPSYS;
+ k->device_id = 0xABCD;
+ k->revision = 0;
+ k->class_id = PCI_CLASS_BRIDGE_PCI;
+ k->is_express = true;
+ k->is_bridge = true;
+ k->exit = pci_bridge_exitfn;
+ k->realize = designware_pcie_root_realize;
+ k->config_read = designware_pcie_root_config_read;
+ k->config_write = designware_pcie_root_config_write;
+
+ dc->reset = pci_bridge_reset;
+ /*
+ * PCI-facing part of the host bridge, not usable without the
+ * host-facing part, which can't be device_add'ed, yet.
+ */
+ dc->user_creatable = false;
+ dc->vmsd = &vmstate_designware_pcie_root;
+}
+
+static uint64_t designware_pcie_host_mmio_read(void *opaque, hwaddr addr,
+ unsigned int size)
+{
+ PCIHostState *pci = PCI_HOST_BRIDGE(opaque);
+ PCIDevice *device = pci_find_device(pci->bus, 0, 0);
+
+ return pci_host_config_read_common(device,
+ addr,
+ pci_config_size(device),
+ size);
+}
+
+static void designware_pcie_host_mmio_write(void *opaque, hwaddr addr,
+ uint64_t val, unsigned int size)
+{
+ PCIHostState *pci = PCI_HOST_BRIDGE(opaque);
+ PCIDevice *device = pci_find_device(pci->bus, 0, 0);
+
+ return pci_host_config_write_common(device,
+ addr,
+ pci_config_size(device),
+ val, size);
+}
+
+static const MemoryRegionOps designware_pci_mmio_ops = {
+ .read = designware_pcie_host_mmio_read,
+ .write = designware_pcie_host_mmio_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+ .impl = {
+ /*
+ * Our device would not work correctly if the guest was doing
+ * unaligned access. This might not be a limitation on the real
+ * device but in practice there is no reason for a guest to access
+ * this device unaligned.
+ */
+ .min_access_size = 4,
+ .max_access_size = 4,
+ .unaligned = false,
+ },
+};
+
+static AddressSpace *designware_pcie_host_set_iommu(PCIBus *bus, void *opaque,
+ int devfn)
+{
+ DesignwarePCIEHost *s = DESIGNWARE_PCIE_HOST(opaque);
+
+ return &s->pci.address_space;
+}
+
+static void designware_pcie_host_realize(DeviceState *dev, Error **errp)
+{
+ PCIHostState *pci = PCI_HOST_BRIDGE(dev);
+ DesignwarePCIEHost *s = DESIGNWARE_PCIE_HOST(dev);
+ SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
+ size_t i;
+
+ for (i = 0; i < ARRAY_SIZE(s->pci.irqs); i++) {
+ sysbus_init_irq(sbd, &s->pci.irqs[i]);
+ }
+
+ memory_region_init_io(&s->mmio,
+ OBJECT(s),
+ &designware_pci_mmio_ops,
+ s,
+ "pcie.reg", 4 * 1024);
+ sysbus_init_mmio(sbd, &s->mmio);
+
+ memory_region_init(&s->pci.io, OBJECT(s), "pcie-pio", 16);
+ memory_region_init(&s->pci.memory, OBJECT(s),
+ "pcie-bus-memory",
+ UINT64_MAX);
+
+ pci->bus = pci_register_root_bus(dev, "pcie",
+ designware_pcie_set_irq,
+ pci_swizzle_map_irq_fn,
+ s,
+ &s->pci.memory,
+ &s->pci.io,
+ 0, 4,
+ TYPE_PCIE_BUS);
+
+ memory_region_init(&s->pci.address_space_root,
+ OBJECT(s),
+ "pcie-bus-address-space-root",
+ UINT64_MAX);
+ memory_region_add_subregion(&s->pci.address_space_root,
+ 0x0, &s->pci.memory);
+ address_space_init(&s->pci.address_space,
+ &s->pci.address_space_root,
+ "pcie-bus-address-space");
+ pci_setup_iommu(pci->bus, designware_pcie_host_set_iommu, s);
+
+ qdev_set_parent_bus(DEVICE(&s->root), BUS(pci->bus));
+ qdev_init_nofail(DEVICE(&s->root));
+}
+
+static const VMStateDescription vmstate_designware_pcie_host = {
+ .name = "designware-pcie-host",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_STRUCT(root,
+ DesignwarePCIEHost,
+ 1,
+ vmstate_designware_pcie_root,
+ DesignwarePCIERoot),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static void designware_pcie_host_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ PCIHostBridgeClass *hc = PCI_HOST_BRIDGE_CLASS(klass);
+
+ hc->root_bus_path = designware_pcie_host_root_bus_path;
+ dc->realize = designware_pcie_host_realize;
+ set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
+ dc->fw_name = "pci";
+ dc->vmsd = &vmstate_designware_pcie_host;
+}
+
+static void designware_pcie_host_init(Object *obj)
+{
+ DesignwarePCIEHost *s = DESIGNWARE_PCIE_HOST(obj);
+ DesignwarePCIERoot *root = &s->root;
+
+ object_initialize(root, sizeof(*root), TYPE_DESIGNWARE_PCIE_ROOT);
+ object_property_add_child(obj, "root", OBJECT(root), NULL);
+ qdev_prop_set_int32(DEVICE(root), "addr", PCI_DEVFN(0, 0));
+ qdev_prop_set_bit(DEVICE(root), "multifunction", false);
+}
+
+static const TypeInfo designware_pcie_root_info = {
+ .name = TYPE_DESIGNWARE_PCIE_ROOT,
+ .parent = TYPE_PCI_BRIDGE,
+ .instance_size = sizeof(DesignwarePCIERoot),
+ .class_init = designware_pcie_root_class_init,
+ .interfaces = (InterfaceInfo[]) {
+ { INTERFACE_PCIE_DEVICE },
+ { }
+ },
+};
+
+static const TypeInfo designware_pcie_host_info = {
+ .name = TYPE_DESIGNWARE_PCIE_HOST,
+ .parent = TYPE_PCI_HOST_BRIDGE,
+ .instance_size = sizeof(DesignwarePCIEHost),
+ .instance_init = designware_pcie_host_init,
+ .class_init = designware_pcie_host_class_init,
+};
+
+static void designware_pcie_register(void)
+{
+ type_register_static(&designware_pcie_root_info);
+ type_register_static(&designware_pcie_host_info);
+}
+type_init(designware_pcie_register)
diff --git a/hw/pci-host/Makefile.objs b/hw/pci-host/Makefile.objs
index 4b69f737b5..6d6597c065 100644
--- a/hw/pci-host/Makefile.objs
+++ b/hw/pci-host/Makefile.objs
@@ -17,3 +17,5 @@ common-obj-$(CONFIG_PCI_PIIX) += piix.o
common-obj-$(CONFIG_PCI_Q35) += q35.o
common-obj-$(CONFIG_PCI_GENERIC) += gpex.o
common-obj-$(CONFIG_PCI_XILINX) += xilinx-pcie.o
+
+common-obj-$(CONFIG_PCI_DESIGNWARE) += designware.o
--
2.14.3
next prev parent reply other threads:[~2018-02-13 17:07 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-13 17:07 [Qemu-devel] [PATCH v6 0/3] Initial i.MX7 support Andrey Smirnov
2018-02-13 17:07 ` Andrey Smirnov [this message]
2018-02-13 18:13 ` [Qemu-devel] [PATCH v6 1/3] pci: Add support for Designware IP block Michael S. Tsirkin
2018-02-13 20:24 ` Andrey Smirnov
2018-02-13 22:15 ` Michael S. Tsirkin
2018-02-13 22:47 ` Andrey Smirnov
2018-03-03 23:25 ` Andrey Smirnov
2018-03-04 3:55 ` Michael S. Tsirkin
2018-03-04 4:00 ` Andrey Smirnov
2018-02-13 17:07 ` [Qemu-devel] [PATCH v6 2/3] i.MX: Add i.MX7 SOC implementation Andrey Smirnov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180213170712.18239-2-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=f4bug@amsat.org \
--cc=jasowang@redhat.com \
--cc=marcel.apfelbaum@zoho.com \
--cc=mst@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=yurovsky@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.