From: Hans de Goede <hdegoede@redhat.com>
To: Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Bard Liao <bardliao@realtek.com>,
Oder Chiou <oder_chiou@realtek.com>
Cc: Hans de Goede <hdegoede@redhat.com>,
alsa-devel@alsa-project.org,
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>,
Takashi Iwai <tiwai@suse.com>
Subject: [PATCH v3 09/10] ASoC: Intel: bytcr_rt5640: Add quirks for various devices
Date: Sun, 13 May 2018 09:24:34 +0200 [thread overview]
Message-ID: <20180513072435.3358-10-hdegoede@redhat.com> (raw)
In-Reply-To: <20180513072435.3358-1-hdegoede@redhat.com>
Even with our recently tweaked defaults, quite a few bytcr_rt5640 devices
still need quirks to be fully functional. This commits adds quirks where
necessary for the 16 bytcr_rt5640 devices I have access to.
The quirks are added for the following reasons:
1) Devices with only one speaker need the mono quirk to avoid driving an
unused and potentially short-circuited output. 8 of my sample of 16 devs
are mono, 4 of these would work with the defaults if it were not for their
mono speaker.
2) Devices using a different input for the internal mic then the default,
this is the case for 6 of my sample of 16 devices.
3) BYTCR devices without an ACPI channel map, which do not work with the
default of SSP0-AIF2, this is the case for 2 of my sample of 16 devices.
4) Devices which need non-default jack-detect settings, this is the case
for 6 of my sample of 16 devices.
This commit add quirks for the following devices:
Acer Iconia Tab 8 W1-810
Chuwi Vi8
HP Pavilion X2 10-n000nd
HP Stream 7
I.T. Works TW891
Lamina I8270
MSI S100
Pipo W4
PoV-mobii-800w (v2.0)
PoV-mobii-800w (v2.1)
Toshiba Click Mini L9W-B
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
sound/soc/intel/boards/bytcr_rt5640.c | 141 ++++++++++++++++++++++++++
1 file changed, 141 insertions(+)
diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index 0f80deaf7fce..686d00405493 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -397,6 +397,18 @@ static int byt_rt5640_aif1_hw_params(struct snd_pcm_substream *substream,
/* Please keep this list alphabetically sorted */
static const struct dmi_system_id byt_rt5640_quirk_table[] = {
+ { /* Acer Iconia Tab 8 W1-810 */
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Iconia W1-810"),
+ },
+ .driver_data = (void *)(BYT_RT5640_DMIC1_MAP |
+ BYT_RT5640_JD_SRC_JD1_IN4P |
+ BYT_RT5640_OVCD_TH_2000UA |
+ BYT_RT5640_OVCD_SF_0P75 |
+ BYT_RT5640_SSP0_AIF1 |
+ BYT_RT5640_MCLK_EN),
+ },
{
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
@@ -429,6 +441,18 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
BYT_RT5640_SSP0_AIF2 |
BYT_RT5640_MCLK_EN),
},
+ { /* Chuwi Vi8 (CWI506) */
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Insyde"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "i86"),
+ /* The above are too generic, also match BIOS info */
+ DMI_MATCH(DMI_BIOS_VERSION, "CHUWI.D86JLBNR"),
+ },
+ .driver_data = (void *)(BYTCR_INPUT_DEFAULTS |
+ BYT_RT5640_MONO_SPEAKER |
+ BYT_RT5640_SSP0_AIF1 |
+ BYT_RT5640_MCLK_EN),
+ },
{
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Circuitco"),
@@ -456,6 +480,111 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
.driver_data = (void *)(BYT_RT5640_IN1_MAP |
BYT_RT5640_MCLK_EN),
},
+ { /* HP Pavilion x2 10-n000nd */
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "HP Pavilion x2 Detachable"),
+ },
+ .driver_data = (void *)(BYT_RT5640_DMIC1_MAP |
+ BYT_RT5640_JD_SRC_JD2_IN4N |
+ BYT_RT5640_OVCD_TH_1500UA |
+ BYT_RT5640_OVCD_SF_0P75 |
+ BYT_RT5640_SSP0_AIF1 |
+ BYT_RT5640_MCLK_EN),
+ },
+ { /* HP Stream 7 */
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "HP Stream 7 Tablet"),
+ },
+ .driver_data = (void *)(BYTCR_INPUT_DEFAULTS |
+ BYT_RT5640_MONO_SPEAKER |
+ BYT_RT5640_JD_NOT_INV |
+ BYT_RT5640_SSP0_AIF1 |
+ BYT_RT5640_MCLK_EN),
+ },
+ { /* I.T.Works TW891 */
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "To be filled by O.E.M."),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "TW891"),
+ DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "To be filled by O.E.M."),
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "TW891"),
+ },
+ .driver_data = (void *)(BYTCR_INPUT_DEFAULTS |
+ BYT_RT5640_MONO_SPEAKER |
+ BYT_RT5640_SSP0_AIF1 |
+ BYT_RT5640_MCLK_EN),
+ },
+ { /* Lamina I8270 / T701BR.SE */
+ .matches = {
+ DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "Lamina"),
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "T701BR.SE"),
+ },
+ .driver_data = (void *)(BYTCR_INPUT_DEFAULTS |
+ BYT_RT5640_MONO_SPEAKER |
+ BYT_RT5640_JD_NOT_INV |
+ BYT_RT5640_SSP0_AIF1 |
+ BYT_RT5640_MCLK_EN),
+ },
+ { /* MSI S100 tablet */
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Micro-Star International Co., Ltd."),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "S100"),
+ },
+ .driver_data = (void *)(BYT_RT5640_IN1_MAP |
+ BYT_RT5640_JD_SRC_JD2_IN4N |
+ BYT_RT5640_OVCD_TH_2000UA |
+ BYT_RT5640_OVCD_SF_0P75 |
+ BYT_RT5640_MONO_SPEAKER |
+ BYT_RT5640_DIFF_MIC |
+ BYT_RT5640_MCLK_EN),
+ },
+ { /* Pipo W4 */
+ .matches = {
+ DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "Aptio CRB"),
+ /* The above are too generic, also match BIOS info */
+ DMI_MATCH(DMI_BIOS_VERSION, "V8L_WIN32_CHIPHD"),
+ },
+ .driver_data = (void *)(BYTCR_INPUT_DEFAULTS |
+ BYT_RT5640_MONO_SPEAKER |
+ BYT_RT5640_SSP0_AIF1 |
+ BYT_RT5640_MCLK_EN),
+ },
+ { /* Point of View Mobii TAB-P800W (V2.0) */
+ .matches = {
+ DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "Aptio CRB"),
+ /* The above are too generic, also match BIOS info */
+ DMI_EXACT_MATCH(DMI_BIOS_VERSION, "3BAIR1014"),
+ DMI_EXACT_MATCH(DMI_BIOS_DATE, "10/24/2014"),
+ },
+ .driver_data = (void *)(BYT_RT5640_IN1_MAP |
+ BYT_RT5640_JD_SRC_JD2_IN4N |
+ BYT_RT5640_OVCD_TH_2000UA |
+ BYT_RT5640_OVCD_SF_0P75 |
+ BYT_RT5640_MONO_SPEAKER |
+ BYT_RT5640_DIFF_MIC |
+ BYT_RT5640_SSP0_AIF2 |
+ BYT_RT5640_MCLK_EN),
+ },
+ { /* Point of View Mobii TAB-P800W (V2.1) */
+ .matches = {
+ DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "Aptio CRB"),
+ /* The above are too generic, also match BIOS info */
+ DMI_EXACT_MATCH(DMI_BIOS_VERSION, "3BAIR1013"),
+ DMI_EXACT_MATCH(DMI_BIOS_DATE, "08/22/2014"),
+ },
+ .driver_data = (void *)(BYT_RT5640_IN1_MAP |
+ BYT_RT5640_JD_SRC_JD2_IN4N |
+ BYT_RT5640_OVCD_TH_2000UA |
+ BYT_RT5640_OVCD_SF_0P75 |
+ BYT_RT5640_MONO_SPEAKER |
+ BYT_RT5640_DIFF_MIC |
+ BYT_RT5640_SSP0_AIF2 |
+ BYT_RT5640_MCLK_EN),
+ },
{
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "TECLAST"),
@@ -465,6 +594,18 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
BYT_RT5640_MCLK_EN |
BYT_RT5640_SSP0_AIF1),
},
+ { /* Toshiba Satellite Click Mini L9W-B */
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "SATELLITE Click Mini L9W-B"),
+ },
+ .driver_data = (void *)(BYT_RT5640_DMIC1_MAP |
+ BYT_RT5640_JD_SRC_JD2_IN4N |
+ BYT_RT5640_OVCD_TH_1500UA |
+ BYT_RT5640_OVCD_SF_0P75 |
+ BYT_RT5640_SSP0_AIF1 |
+ BYT_RT5640_MCLK_EN),
+ },
{ /* Catch-all for generic Insyde tablets, must be last */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Insyde"),
--
2.17.0
next prev parent reply other threads:[~2018-05-13 7:25 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-13 7:24 [PATCH v3 00/10] ASoC: rt5640: Add jack-detect and button-press support Hans de Goede
2018-05-13 7:24 ` [PATCH v3 01/10] ASoC: Intel: bytcr_rt5640: Use device properties for setting up dmic Hans de Goede
2018-05-17 16:40 ` Applied "ASoC: Intel: bytcr_rt5640: Use device properties for setting up dmic" to the asoc tree Mark Brown
2018-05-13 7:24 ` [PATCH v3 02/10] ASoC: Intel: bytcr_rt5640: Fix Dell Venue 8 5830 Pro quirk Hans de Goede
2018-05-13 7:24 ` [PATCH v3 03/10] ASoC: Intel: bytcr_rt5640: Enable jack detection Hans de Goede
2018-05-13 7:24 ` [PATCH v3 04/10] ASoC: Intel: bytcr_rt5640: Change BYTCR default input to IN3 Hans de Goede
2018-05-13 7:24 ` [PATCH v3 05/10] ASoC: Intel: bytcr_rt5640: Unify BYTCR input defaults Hans de Goede
2018-05-13 7:24 ` [PATCH v3 06/10] ASoC: Intel: bytcr_rt5640: Add default jack-detect settings Hans de Goede
2018-05-13 7:24 ` [PATCH v3 07/10] ASoC: Intel: bytcr_rt5640: Sort DMI quirk list alphabetically Hans de Goede
2018-05-13 7:24 ` [PATCH v3 08/10] ASoC: Intel: bytcr_rt5640: Use dmi_first_match() for DMI quirk handling Hans de Goede
2018-05-13 7:24 ` Hans de Goede [this message]
2018-05-13 7:24 ` [PATCH v3 10/10] ASoC: Intel: bytcr_rt5640: Set card long_name based on quirks Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180513072435.3358-10-hdegoede@redhat.com \
--to=hdegoede@redhat.com \
--cc=alsa-devel@alsa-project.org \
--cc=bardliao@realtek.com \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=oder_chiou@realtek.com \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.