All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marek Vasut <marek.vasut@gmail.com>
To: linux-pci@vger.kernel.org
Cc: Marek Vasut <marek.vasut+renesas@gmail.com>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Phil Edworthy <phil.edworthy@renesas.com>,
	Simon Horman <horms+renesas@verge.net.au>,
	Wolfram Sang <wsa@the-dreams.de>,
	linux-renesas-soc@vger.kernel.org
Subject: [PATCH 1/6] PCI: rcar: Pull bus clock enable/disable from rcar_pcie_get_resources()
Date: Thu, 24 May 2018 09:23:18 +0200	[thread overview]
Message-ID: <20180524072323.22115-1-marek.vasut+renesas@gmail.com> (raw)

The rcar_pcie_get_resources() is another misnomer with a side effect.
The function does not only get resources, but also enables/disables bus
clock. This is forgotten in the probe() function though and if anything
in probe() fails after rcar_pcie_get_resources() is called, the bus
clock are never disabled.

This patch pulls the clock handling out of the rcar_pcie_get_resources()
and enables clock after all the resources were requested. Moreover, this
patch also always disables the clock in case of failure.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc@vger.kernel.org
---
 drivers/pci/host/pcie-rcar.c | 33 ++++++++++++++++-----------------
 1 file changed, 16 insertions(+), 17 deletions(-)

diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
index 8d161563bce8..0879880f7975 100644
--- a/drivers/pci/host/pcie-rcar.c
+++ b/drivers/pci/host/pcie-rcar.c
@@ -946,32 +946,22 @@ static int rcar_pcie_get_resources(struct rcar_pcie *pcie)
 		dev_err(dev, "cannot get pcie bus clock\n");
 		return PTR_ERR(pcie->bus_clk);
 	}
-	err = clk_prepare_enable(pcie->bus_clk);
-	if (err)
-		return err;
 
 	i = irq_of_parse_and_map(dev->of_node, 0);
 	if (!i) {
 		dev_err(dev, "cannot get platform resources for msi interrupt\n");
-		err = -ENOENT;
-		goto err_map_reg;
+		return -ENOENT;
 	}
 	pcie->msi.irq1 = i;
 
 	i = irq_of_parse_and_map(dev->of_node, 1);
 	if (!i) {
 		dev_err(dev, "cannot get platform resources for msi interrupt\n");
-		err = -ENOENT;
-		goto err_map_reg;
+		return -ENOENT;
 	}
 	pcie->msi.irq2 = i;
 
 	return 0;
-
-err_map_reg:
-	clk_disable_unprepare(pcie->bus_clk);
-
-	return err;
 }
 
 static int rcar_pcie_inbound_ranges(struct rcar_pcie *pcie,
@@ -1115,22 +1105,28 @@ static int rcar_pcie_probe(struct platform_device *pdev)
 		goto err_pm_put;
 	}
 
+	err = clk_prepare_enable(pcie->bus_clk);
+	if (err) {
+		dev_err(dev, "failed to enable bus clock: %d\n", err);
+		goto err_pm_put;
+	}
+
 	err = rcar_pcie_parse_map_dma_ranges(pcie, dev->of_node);
 	if (err)
-		goto err_pm_put;
+		goto err_clk_disable;
 
 	phy_init_fn = of_device_get_match_data(dev);
 	err = phy_init_fn(pcie);
 	if (err) {
 		dev_err(dev, "failed to init PCIe PHY\n");
-		goto err_pm_put;
+		goto err_clk_disable;
 	}
 
 	/* Failure to get a link might just be that no cards are inserted */
 	if (rcar_pcie_hw_init(pcie)) {
 		dev_info(dev, "PCIe link down\n");
 		err = -ENODEV;
-		goto err_pm_put;
+		goto err_clk_disable;
 	}
 
 	data = rcar_pci_read_reg(pcie, MACSR);
@@ -1142,16 +1138,19 @@ static int rcar_pcie_probe(struct platform_device *pdev)
 			dev_err(dev,
 				"failed to enable MSI support: %d\n",
 				err);
-			goto err_pm_put;
+			goto err_clk_disable;
 		}
 	}
 
 	err = rcar_pcie_enable(pcie);
 	if (err)
-		goto err_pm_put;
+		goto err_clk_disable;
 
 	return 0;
 
+err_clk_disable:
+	clk_disable_unprepare(pcie->bus_clk);
+
 err_pm_put:
 	pm_runtime_put(dev);
 
-- 
2.16.2

             reply	other threads:[~2018-05-24  7:23 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-24  7:23 Marek Vasut [this message]
2018-05-24  7:23 ` [PATCH 2/6] PCI: rcar: Add missing irq_dispose_mapping() into failpath Marek Vasut
2018-05-24  7:23 ` [PATCH 3/6] PCI: rcar: Teardown MSI setup if rcar_pcie_enable() fails Marek Vasut
2018-05-24  7:23 ` [PATCH 4/6] PCI: rcar: Poll more often in rcar_pcie_wait_for_dl() Marek Vasut
2018-05-24  7:23 ` [PATCH 5/6] PCI: rcar: Remove IRQ mappings in rcar_pcie_enable_msi failpath Marek Vasut
2018-05-24  7:23 ` [PATCH 6/6] PCI: rcar: Shut the PHY down in failpath Marek Vasut

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180524072323.22115-1-marek.vasut+renesas@gmail.com \
    --to=marek.vasut@gmail.com \
    --cc=geert+renesas@glider.be \
    --cc=horms+renesas@verge.net.au \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=marek.vasut+renesas@gmail.com \
    --cc=phil.edworthy@renesas.com \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.